Basic Information | Post buying leads | Suppliers | Cas Database |
Name |
2-Ethoxyethyl methacrylate |
EINECS | 219-135-3 |
CAS No. | 2370-63-0 | Density | 0.957 g/cm3 |
PSA | 35.53000 | LogP | 1.14220 |
Solubility | 17.05g/L at 20℃ | Melting Point |
<25 °C |
Formula | C8H14O3 | Boiling Point | 182.408 °C at 760 mmHg |
Molecular Weight | 158.197 | Flash Point | 71.667 °C |
Transport Information | N/A | Appearance | N/A |
Safety | 26-27-36/37/39 | Risk Codes | 36/37/38 |
Molecular Structure | Hazard Symbols | Xi | |
Synonyms |
Methacrylicacid, 2-ethoxyethyl ester (6CI,7CI,8CI);Ethanol, 2-ethoxy-, methacrylate(8CI);Acryester ET;Ethoxyethyl methacrylate;NSC24162;b-Ethoxyethyl methacrylate; |
Article Data | 6 |
Conditions | Yield |
---|---|
With pyridine In diethyl ether at 35℃; for 4h; | 77% |
Conditions | Yield |
---|---|
With sulfur trioxide; copper at 80 - 130℃; Zufuegen von Wasser, Kochen und folgendes Erhitzen des Reaktionsgemisches mit Aethylenglykol-monoaethylaether auf 100-110grad; |
Conditions | Yield |
---|---|
With sulfuric acid | |
With sodium 2-ethoxyethoxide | |
With sodium 2-ethoxyethoxide |
2-ethoxy-ethanol
1,2-propanediene
carbon monoxide
2-ethoxyethyl methacrylate
Conditions | Yield |
---|---|
dodecacarbonyl-triangulo-triruthenium at 100℃; under 11400 Torr; for 3h; | 80 % Chromat. |
methyl 2-methoxy-2-methylpropanoate
2-ethoxyethyl methacrylate
Conditions | Yield |
---|---|
Multi-step reaction with 2 steps 1: anhydrous oxalic acid; hydroquinone 2: H2SO4 View Scheme |
2-ethoxyethyl methacrylate
2-(naphthalen-1-yl)benzenamine
Conditions | Yield |
---|---|
With disodium hydrogenphosphate; (S)-STRIP; palladium diacetate; silver sulfate In toluene at 60℃; for 48h; Schlenk technique; stereoselective reaction; | 61% |
Conditions | Yield |
---|---|
With bis(acetylacetonate)nickel(II) In toluene |
Conditions | Yield |
---|---|
With bis(acetylacetonate)nickel(II) In toluene |
Conditions | Yield |
---|---|
With potassium peroxomonosulphate; sodium dodecyl-sulfate In cyclohexane; water at 60 - 70℃; for 3.5h; Product distribution; different ratios of monomers and solvent; |
2-ethoxyethyl methacrylate
polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 0.5:100
Conditions | Yield |
---|---|
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h; |
The 2-Ethoxyethyl methacrylate with cas registry number of 2370-63-0, belongs to the following product categories: (1)Acrylic Monomers; (2)C8 to C9Monomers; (3)Carbonyl Compounds; (4)Esters; (5)Methacrylate. Its systematic name and IUPAC name are the same, which is 2-ethoxyethyl 2-methylprop-2-enoate.
Physical properties about this chemical are: (1)ACD/LogP: 1.57; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 1.57; (4)ACD/LogD (pH 7.4): 1.57; (5)ACD/BCF (pH 5.5): 9.25; (6)ACD/BCF (pH 7.4): 9.25; (7)ACD/KOC (pH 5.5): 171.01; (8)ACD/KOC (pH 7.4): 171.01; (9)#H bond acceptors: 3; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 6; (12)Polar Surface Area: 35.53 Å2; (13)Index of Refraction: 1.424; (14)Molar Refractivity: 42.19 cm3; (15)Molar Volume: 165.3 cm3; (16)Polarizability: 16.72×10-24cm3; (17)Surface Tension: 27.9 dyne/cm; (18)Enthalpy of Vaporization: 41.87 kJ/mol; (19)Vapour Pressure: 0.812 mmHg at 25°C.
When you are using this chemical, please be cautious about it as the following:
The 2-Ethoxyethyl methacrylate irritates to eyes, respiratory system and skin. When use it, wear suitable protective clothing, gloves and eye/face protection. If contact with eyes, rinse immediately with plenty of water and seek medical advice. After use it, take off immediately all contaminated clothing.
You can still convert the following datas into molecular structure:
(1)SMILES: O=C(OCCOCC)\C(=C)C;
(2)InChI: InChI=1/C8H14O3/c1-4-10-5-6-11-8(9)7(2)3/h2,4-6H2,1,3H3;
(3)InChIKey: SFPNZPQIIAJXGL-UHFFFAOYAD;
(4)Std. InChI: InChI=1S/C8H14O3/c1-4-10-5-6-11-8(9)7(2)3/h2,4-6H2,1,3H3;
(5)Std. InChIKey: SFPNZPQIIAJXGL-UHFFFAOYSA-N