- Copper(II) acetate-catalysed conversion of aldoximes to amides under mild conditions
-
A mild method for the metal-catalysed conversion of aldoximes to amides has been achieved by the combined use of copper(II) acetate and MeCN in EtOH under reflux. The presence of a catalytic amount of MeCN (0.05 equiv.) accelerated the reaction and improved the yield. Aryl, heteroaryl and alkyl aldoximes were transformed into the corresponding amides in moderate to good yield. 2-Furyl and 2-Thiophenyl aldoximes, which possess a heteroatom lone pair positioned ortho to the oximido group, showed enhanced reactivity, and the corresponding amides were obtained in excellent yield.
- Ma, Xiaoyun,Lu, Ming
-
-
Read Online
- One-Step Synthesis of Nitriles from Acids, Esters and Amides Using DIBAL-H and Ammonium Chloride
-
A convenient, one-step procedure is presented for the conversion of carboxylic acids or their derivatives (esters, lactones, amides) to nitriles with an aminoalane reagent prepared from diisobutylaluminum hydride (DIBAL-H) and ammonium chloride.
- Wojtkielewicz, Agnieszka,?otowski, Zenon,Morzycki, Jacek W.
-
-
Read Online
- A Molecular Iron-Based System for Divergent Bond Activation: Controlling the Reactivity of Aldehydes
-
The direct synthesis of amides and nitriles from readily available aldehyde precursors provides access to functional groups of major synthetic utility. To date, most reliable catalytic methods have typically been optimized to supply one product exclusively. Herein, we describe an approach centered on an operationally simple iron-based system that, depending on the reaction conditions, selectively addresses either the C=O or C-H bond of aldehydes. This way, two divergent reaction pathways can be opened to furnish both products in high yields and selectivities under mild reaction conditions. The catalyst system takes advantage of iron's dual reactivity capable of acting as (1) a Lewis acid and (2) a nitrene transfer platform to govern the aldehyde building block. The present transformation offers a rare control over the selectivity on the basis of the iron system's ionic nature. This approach expands the repertoire of protocols for amide and nitrile synthesis and shows that fine adjustments of the catalyst system's molecular environment can supply control over bond activation processes, thus providing easy access to various products from primary building blocks.
- Chatterjee, Basujit,Jena, Soumyashree,Chugh, Vishal,Weyhermüller, Thomas,Werlé, Christophe
-
p. 7176 - 7185
(2021/06/30)
-
- One-pot reductive amination of carboxylic acids: a sustainable method for primary amine synthesis
-
The reductive amination of carboxylic acids is a very green, efficient and sustainable method for the production of (bio-based) amines. However, with current technology, this reaction requires two to three reaction steps. Here, we report the first (heterogeneous) catalytic system for the one-pot reductive amination of carboxylic acids to amines, with solely H2 and NH3 as the reactants. This reaction can be performed with relatively cheap ruthenium-tungsten bimetallic catalysts in the green and benign solvent cyclopentyl methyl ether (CPME). Selectivities of up to 99% for the primary amine could be achieved at high conversions. Additionally, the catalyst is recyclable and tolerant for common impurities such as water and cations (e.g. sodium carboxylate).
- Coeck, Robin,De Vos, Dirk E.
-
supporting information
p. 5105 - 5114
(2020/08/25)
-
- Synthesis of: N-acyl amide natural products using a versatile adenylating biocatalyst
-
Natural products are secondary metabolites produced by many different organisms such as bacteria, fungi and plants. These biologically active molecules have been widely exploited for clinical application. Here we investigate TamA, a key enzyme from the biosynthetic pathway of tambjamine YP1, an acylated bipyrrole that is produced by the marine microorganism Pseudoalteromonas tunicata. TamA is a didomain enzyme composed of a catalytic adenylation (ANL) and an acyl carrier protein (ACP) domain that together control the fatty acid chain length of the YP1. Here we show that the TamA ANL domain alone can be used to generate a range of acyl adenylates that can be captured by a number of amines thus leading to the production of a series of fatty N-acyl amides. We exploit this biocatalytic promiscuity to produce the recently discovered class of N-acyl histidine amide natural products from Legionella pneumophila.
- Marchetti, Piera M.,Richardson, Shona M.,Kariem, Noor M.,Campopiano, Dominic J.
-
supporting information
p. 1192 - 1196
(2019/07/31)
-
- Selective Transformations of Triglycerides into Fatty Amines, Amides, and Nitriles by using Heterogeneous Catalysis
-
The use of triglycerides as an important class of biomass is an effective strategy to realize a more sustainable society. Herein, three heterogeneous catalytic methods are reported for the selective one-pot transformation of triglycerides into value-added chemicals: i) the reductive amination of triglycerides into fatty amines with aqueous NH3 under H2 promoted by ZrO2-supported Pt clusters; ii) the amidation of triglycerides under gaseous NH3 catalyzed by high-silica H-beta (Hβ) zeolite at 180 °C; iii) the Hβ-promoted synthesis of nitriles from triglycerides and gaseous NH3 at 220 °C. These methods are widely applicable to the transformation of various triglycerides (C4–C18 skeletons) into the corresponding amines, amides, and nitriles.
- Jamil, Md. A. R.,Siddiki, S. M. A. Hakim,Touchy, Abeda Sultana,Rashed, Md. Nurnobi,Poly, Sharmin Sultana,Jing, Yuan,Ting, Kah Wei,Toyao, Takashi,Maeno, Zen,Shimizu, Ken-ichi
-
p. 3115 - 3125
(2019/04/26)
-
- Corresponding amine nitrile and method of manufacturing thereof
-
The invention relates to a manufacturing method of nitrile. Compared with the prior art, the manufacturing method has the characteristics of significantly reduced using amount of an ammonia source, low environmental pressure, low energy consumption, low production cost, high purity and yield of a nitrile product and the like, and nitrile with a more complex structure can be obtained. The invention also relates to a method for manufacturing corresponding amine from nitrile.
- -
-
Paragraph 0138; 0139; 0140; 0141; 0142
(2018/05/07)
-
- Metal-Free Thermal Activation of Molecular Oxygen Enabled Direct α-CH2-Oxygenation of Free Amines
-
Direct oxidation of α-CH2 group of free amines is hard to achieve due to the higher reactivity of amine moiety. Therefore, oxidation of amines involves the use of sophisticated metallic reagents/catalyst in the presence or absence of hazardous oxidants under sensitive reaction conditions. A novel method for direct C-H oxygenation of aliphatic amines through a metal-free activation of molecular oxygen has been developed. Both activated and unactivated free amines were oxygenated efficiently to provide a wide variety of amides (primary, secondary) and lactams under operationally simple conditions without the aid of metallic reagents and toxic oxidants. The method has been applied to the synthesis of highly functionalized amide-containing medicinal drugs, such as O-Me-alibendol and -buclosamide.
- Ghosh, Santanu,Jana, Chandan K.
-
p. 260 - 266
(2018/02/19)
-
- Selective Cleavage of Inert Aryl C-N Bonds in N-Aryl Amides
-
A highly selective, IBX-promoted reaction has been developed for the oxidative cleavage of inert C(aryl)-N bonds on secondary amides while leaving the C(carbonyl)-N bond unchanged. This metal-free reaction proceeds under mild conditions (HFIP/H2O, 25 °C), providing facile access to various useful primary amides, some of which would be otherwise unattainable using conventional aminolysis and hydrolysis approaches.
- Zhang, Zhiguo,Zheng, Dan,Wan, Yameng,Zhang, Guisheng,Bi, Jingjing,Liu, Qingfeng,Liu, Tongxin,Shi, Lei
-
p. 1369 - 1376
(2018/02/09)
-
- NOVEL LIPIDS AND LIPID NANOPARTICLE FORMULATIONS FOR DELIVERY OF NUCLEIC ACIDS
-
Compounds are provided having the following structure: (I) or a pharmaceutically acceptable salt, tautomer or stereoisomer thereof, wherein R1a, R1b, R2a, R2b, R3a, R3b, R4a, R4b, R5, R6, R7, R8, R9, L1, L2, a, b, c, d and e are as defined herein. Use of the compounds as a component of lipid nanoparticle formulations for delivery of a therapeutic agent, compositions comprising the compounds and methods for their use and preparation are also provided.
- -
-
Page/Page column 76
(2016/05/02)
-
- A novel aromatic carbocation-based coupling reagent for esterification and amidation reactions
-
A novel tropylium-based coupling reagent has been developed to facilitate the synthesis of a series of esters, amides, lactones and peptides under mild reaction conditions. Remarkably, this reagent can be used in catalytic amounts in conjunction with a sacrificial reagent, offering a new and efficient method for nucleophilic coupling reactions of carboxylic acids.
- Nguyen, Thanh V.,Lyons, Demelza J.M.
-
supporting information
p. 3131 - 3134
(2015/06/17)
-
- Efficient Mo(VI)-catalyzed hydration of nitrile with acetaldoxime
-
A method for the selective hydration of nitrile to amide by employing commercially available acetaldoxime and inexpensive oxometallate such as molybdate, vanadate, and tungstate in environmentally friendly water is described. Under this protocol, nitriles including aromatic nitriles, heterocyclic nitriles, and aliphatic nitriles were converted into the corresponding amides in good to excellent yields.
- Ma, Xiaoyun,He, Ying,Lu, Ming
-
supporting information
p. 474 - 480
(2014/01/23)
-
- Electrospray ionization and collision induced dissociation mass spectrometry of primary fatty acid amides
-
Primary fatty acid amides are a group of bioactive lipids that have been linked with a variety of biological processes such as sleep regulation and modulation of monoaminergic systems. As novel forms of these molecules continue to be discovered, more emphasis will be placed on selective, trace detection. Currently, there is no published experimental determination of collision induced dissociation of PFAMs. A select group of PFAM standards, 12 to 22 length carbon chains, were directly infused into an electrospray ionization source Quadrupole Time of Flight Mass Spectrometer. All standards were monitored in positive mode using the [M + H]+ peak. Mass Hunter Qualitative Analysis software was used to calculate empirical formulas of the product ions. All PFAMs showed losses of 14 m/z indicative of an acyl chain, while the monounsaturated group displayed neutral losses corresponding to H2O and NH3. The resulting spectra were used to propose fragmentation mechanisms. Isotopically labeled PFAMs were used to validate the proposed mechanisms. Patterns of saturated versus unsaturated standards were distinctive, allowing for simple differentiation. This determination will allow for fast, qualitative identification of PFAMs. Additionally, it will provide a method development tool for selection of unique product ions when analyzed in multiple reaction monitoring mode.
- Divito, Erin B.,Davic, Andrew P.,Johnson, Mitchell E.,Cascio, Michael
-
experimental part
p. 2388 - 2394
(2012/07/27)
-
- Copper(II)-catalyzed hydration of nitriles with the aid of acetaldoxime
-
An efficient method for the selective hydration of nitrile to amide by employing inexpensive copper salt catalyst and commercially available acetaldoxime in environmentally friendly water is described. Under this protocol, nitriles including aromatic nitriles, heterocyclic nitriles and aliphatic nitriles were converted into the corresponding amides in good to excellent yields.
- Ma, Xiao-Yun,He, Ying,Hu, Yu-Lin,Lu, Ming
-
supporting information; experimental part
p. 449 - 452
(2012/02/01)
-
- The hydration of nitriles catalyzed by simple transition metal salt of the fourth period with the aid of acetaldoxime
-
We describe here a method for selective hydration of nitriles into the corresponding amides by employing commercially available acetaldoxime and simple transition metal catalysts such as nickel salts, zinc salts, cobalt salts and manganese salts in water. Nickel salts show the highest catalytic activity, owing to their relatively small diameter of the metal cation. Nitriles having electron-withdrawing groups could be converted into the corresponding amides in excellent yields using nickel catalyst at room temperature. Heterocyclic nitriles with heteroatom lone pair positioned ortho to the nitrile group show high reactivity; even these special nitriles could be hydrated by transition metal catalyst and water at refluxing temperature in the absence of acetaldoxime. Copyright
- Ma, Xiaoyun,He, Ying,Wang, Pengcheng,Lu, Ming
-
experimental part
p. 377 - 382
(2012/08/08)
-
- Lipase-catalyzed transformations using poly(ethylene glycol) as solvent
-
Candida antarctica lipase catalyzes a number of elementary reactions like alcoholysis, ammoniolysis and aminolysis in poly(ethylene glycol) (PEG) media. Reaction rates were comparable to or better than those observed in conventional organic reaction media and ionic liquids. It is envisaged that PEGs could have added benefits for performing biotransformations with highly polar substrates, which are sparingly soluble in common organic solvents.
- Kidwai, Mazaahir,Poddar, Roona,Bhardwaj, Saurav
-
experimental part
p. 113 - 118
(2011/12/15)
-
- An improved method for the conversion of nitriles to amides using N,N-disubstituted hydroxylamine
-
An improved method for the selective hydration of nitriles to amides employing N,N-disubstituted hydroxylamine is described leading to a reduction in reaction time and improved yield. Amides having electron-donating groups, which were not reported using the original method, were obtained in excellent yields. The amount of N,N-disubstituted hydroxylamine was reduced from three equivalents to one equivalent and the use of water as the reaction medium is environmentally friendly.
- Ma, Xiao-Yun,Lu, Ming
-
experimental part
p. 480 - 483
(2011/10/18)
-
- Facile One-pot conversion of aldehydes into amides
-
A facile one-pot synthesis of amides from aldehydes has been developed. This tandem process involves the formation of a nitrile intermediate obtained from the reaction of an aldehyde with hydroxylamine hydrochloride in dimethylsulfoxide at 100°C and the subsequent treatment of the nitrile with basic hydrogen peroxide. The resulting amide products were produced in good yields (67-95%) and purity (>95%). Copyright
- Chill, Samuel T.,Mebane, Robert C.
-
scheme or table
p. 2014 - 2017
(2010/09/11)
-
- Efficient hydrolysis of nitriles to amides with hydroperoxide anion in aqueous surfactant solutions as reaction medium
-
Aliphatic and aromatic nitriles are converted to corresponding amides in a single step via hydrolysis with basic H2O2 in aqueous solution of the surfactant Cetyltrimethylammonium methanesulfonate (CTAOMs). The method has several advantages: use and recycle of water as reaction medium, use of environmentally benign oxidant H2O2, easy product isolation, short reaction time, high yields and selectivity, mild conditions.
- Brinchi, Lucia,Chiavini, Lisa,Goracci, Laura,Di Profio, Pietro,Germani, Raimondo
-
experimental part
p. 175 - 179
(2010/04/23)
-
- Synthetic libraries of tyrosine-derived bacterial metabolites
-
The preparation of a collection of 131 small molecules, reminiscent of families of long chain N-acyl tyrosines, enamides and enol esters that have been isolated from heterologous expression of environmental DNA (eDNA) in Escherichia coli, is reported. The synthetic libraries of N-acyl tyrosines and their 3-keto counterparts were prepared via solid-phase routes, whereas the enamides and enol esters were synthesized in solution-phase.
- Georgiades, Savvas N.,Clardy, Jon
-
supporting information; experimental part
p. 3117 - 3121
(2009/04/03)
-
- A one-pot synthesis of primary amides from aldoximes or aldehydes in water in the presence of a supported rhodium catalyst
-
(Equation Presented) Dehydration/Rehydration in Water: Supported rhodium hydroxide (Rh(OH)x/ Al2O3) is an effective heterogeneous catalyst for the synthesis of primary amides from aldoximes and aldehydes in water in a reaction that is entirely free of hazardous and carcinogenic organic solvents (see scheme).
- Fujiwara, Hiroshi,Ogasawara, Yoshiyuki,Yamaguchi, Kazuya,Mizuno, Noritaka
-
p. 5202 - 5205
(2008/03/13)
-
- Selective hydrolysis of nitriles to amides using NaOH-PEG under microwave irradiation
-
We describe here an efficient, rapid and selective method for the conversion of nitriles in to their corresponding amides in the presence of PEG-400, aqueous sodium hydroxide system under microwave irradiation.
- Bendale, Pravin M.,Khadilkar, Bhushan M.
-
p. 1713 - 1718
(2007/10/03)
-
- Reduction of Azides with Zinc Borohydride
-
Zinc borohydride in 1,2-dimethoxyethane provides an efficient procedure for the reduction of organic azides.Aroyl, acyl, and arylsulfonyl azides readily undergo reduction at room temperatue to produce amides and sulfonamides in excellent yields; however, substitution with electron-withdrawing groups in the aroyl azides leads to the corresponding benzyl alcohols.Reduction of aryl and alkyl azides has also been achieved in high yields, under some modified conditions.
- Ranu, Brindaban C.,Sarkar, Arunkanti,Chakraborty, Rupak
-
p. 4114 - 4116
(2007/10/02)
-
- Hair care compositions containing low strength elastomers
-
A hair treating composition for imparting curl retention to hair in which at least one film forming ingredient is applied to the hair in the form of an unfilled moisture cured low strength silicone elastomer. Upon contact with moisture the compositions cure to provide improved style retention, body and shine.
- -
-
-
- Organic compounds substituted heptadeca-5,9- and 5,10-dienoic acid
-
The present invention provides novel substituted heptadeca-5,9- and 5,10-dienoic acid and similar fatty acid compounds which are derivatives of certain prostaglandins and are potent thromboxane A2 inhibitors. By virtue of this pharmacological property, they represent useful pharmacological agents for a wide variety of purposes.
- -
-
-
