- Electrochemical reduction of polyhalogenated aryl derivatives in the presence of pinacolborane: Electrosynthesis of functionalised arylboronic esters
-
The electroreduction of several dihalogenated aryl compounds was carried out in the presence of pinacolborane as the electrophile for the synthesis of halogenated arylboronic ester derivatives. The nature and the relative position of the halogen substituents strongly influence the boration results. The electroreduction of a trihalogenated derivative was also examined. Reactions were carried out in THF in a single-compartment cell in the presence of a Mg anode.
- Laza,Pintaric,Olivero,Dunach
-
-
Read Online
- Unreactive C-N Bond Activation of Anilines via Photoinduced Aerobic Borylation
-
Unreactive C-N bond activation of anilines was achieved by photoinduced aerobic borylation. A diverse range of tertiary and secondary anilines were converted to aryl boronate esters in moderate to good yields with wide functional group tolerance under simple and ambient photochemical conditions. This transformation achieved the direct and facile C-N bond activation of unreactive anilines, providing a convenient and practical route transforming widely available anilines into useful aryl boronate esters.
- Ji, Shuohan,Qin, Shengxiang,Yin, Chunyu,Luo, Lu,Zhang, Hua
-
supporting information
p. 64 - 68
(2021/12/27)
-
- Photochemical and electrochemical C-N borylation of arylhydrazines
-
The C-N borylation of arylhydrazine hydrochlorides with bis(pinacolato)diboron was achieved under photochemical and electrochemical conditions, respectively. This novel and scalable transformation provides two efficient and mild transition-metal-free synt
- Du, Linlin,Sun, Li,Zhang, Hua
-
supporting information
p. 1716 - 1719
(2022/02/21)
-
- Cu-mediated: vs. Cu-free selective borylation of aryl alkyl sulfones
-
A Cu-catalysed borylation of aryl alkyl sulfones was developed for the high yield synthesis of versatile arylboronic esters using a readily prepared NHC-Cu catalyst. In addition, the selective cleavage of either alkyl(C)-sulfonyl or aryl(C)-sulfonyl bonds
- Hu, Jiefeng,Huang, Mingming,Marder, Todd B.,Radius, Udo,Tang, Man,Westcott, Stephen A.
-
supporting information
p. 395 - 398
(2022/01/19)
-
- COMPOUND FOR ORGANIC ELECTRONIC ELEMENT, ORGANIC ELECTRONIC ELEMENT USING THE SAME, AND AN ELECTRONIC DEVICE THEREOF
-
Provided is a novel compound capable of improving the luminous efficiency and stability of a device, an organic electronic element using the same, and an electronic device thereof.
- -
-
Paragraph 0088; 0090-0091; 0114; 0117
(2022/03/02)
-
- Mono-Phosphine Metal-Organic Framework-Supported Cobalt Catalyst for Efficient Borylation Reactions
-
We report a metal-organic framework (MOF) supported monoligated phosphine-cobalt complex, which is an active heterogeneous catalyst for aromatic C?H borylation and alkene hydroboration. The mono(phosphine)-Co catalyst (MOF?P?Co) was prepared by metalation of a porous triarylphosphine-functionalized MOF (MOF?P) with CoCl2 followed by activation with NaEt3BH. The MOF catalyst has a broad substrate scope with excellent functional group tolerance to afford arene- and alkyl-boronate esters in excellent yields and selectivity. MOF?P?Co gave a turnover number (TON) of 30,000 and could be recycled and reused at least 13 times in arene C?H borylation. Importantly, the attempt to prepare the homogeneous control (Ph3P?Co) using triphenylphosphine was unsuccessful due to the facile disproportionation reactions or intermolecular ligand exchanges in the solution. In contrast, the site isolation of the active mono(phosphine)-Co species within the MOF affords the robust and coordinatively unsaturated metal complexes, allowing to explore their catalytic properties and the reaction mechanism.
- Akhtar, Naved,Antil, Neha,Balendra,Begum, Wahida,Chauhan, Manav,Gupta, Poorvi,Kumar, Ajay,Malik, Jaideep,Manna, Kuntal,Newar, Rajashree
-
supporting information
(2022/03/15)
-
- Palladium-Catalyzed Chemoselective Borylation of (Poly)halogenated Aryl Triflates and Their Application in Consecutive Reactions
-
This study reports the palladium-catalyzed chemoselective borylation of (poly)halogenated aryl triflates with a reactivity order of C?Cl>C?OTf. A catalyst system comprising Pd(OAc)2 and SelectPhos (L1) enables a reaction with high reactivity and chemoselectivity. The consecutively chemoselective borylation reaction followed by the chemoselective intermolecular Suzuki-Miyaura reaction can be performed using a one-pot two-step approach to synthesize unsymmetrical biaryl compounds containing the triflate moiety. The reaction can be scaled up to the gram scale without diminishing the yield and chemoselectivity. (Figure presented.).
- Chen, Zicong,Ng, Shan Shan,So, Chau Ming,Yuen, On Ying
-
-
- Cross-Coupling through Ag(I)/Ag(III) Redox Manifold
-
In ample variety of transformations, the presence of silver as an additive or co-catalyst is believed to be innocuous for the efficiency of the operating metal catalyst. Even though Ag additives are required often as coupling partners, oxidants or halide scavengers, its role as a catalytically competent species is widely neglected in cross-coupling reactions. Most likely, this is due to the erroneously assumed incapacity of Ag to undergo 2e? redox steps. Definite proof is herein provided for the required elementary steps to accomplish the oxidative trifluoromethylation of arenes through AgI/AgIII redox catalysis (i. e. CEL coupling), namely: i) easy AgI/AgIII 2e? oxidation mediated by air; ii) bpy/phen ligation to AgIII; iii) boron-to-AgIII aryl transfer; and iv) ulterior reductive elimination of benzotrifluorides from an [aryl-AgIII-CF3] fragment. More precisely, an ultimate entry and full characterization of organosilver(III) compounds [K]+[AgIII(CF3)4]? (K-1), [(bpy)AgIII(CF3)3] (2) and [(phen)AgIII(CF3)3] (3), is described. The utility of 3 in cross-coupling has been showcased unambiguously, and a large variety of arylboron compounds was trifluoromethylated via [AgIII(aryl)(CF3)3]? intermediates. This work breaks with old stereotypes and misconceptions regarding the inability of Ag to undergo cross-coupling by itself.
- Demonti, Luca,Mézailles, Nicolas,Nebra, Noel,Saffon-Merceron, Nathalie
-
supporting information
p. 15396 - 15405
(2021/10/12)
-
- Synthesis of arylboronates via the Pd-catalyzed desulfitative coupling reaction of sodium arylsulfinates with bis(pinacolato)diboron
-
The desulfitative borylation reaction of sodium arylsulfinates with bis(pinacolato)diboron or bis(neopentylglycolato)diboron under palladium catalysis has been developed, allowing selective C-B bond formation to give arylboronates with a range of functional groups in moderate to good yields under mild reaction conditions. A gram-scale preparation as well as the cascade Suzuki-Miyaura cross-coupling of arylboronates demonstrated the potential practical utility in organic synthesis.
- Qiu, Di,Li, Songyi,Yue, Guanglu,Mao, Jinshan,Xu, Bei,Yuan, Xinyu,Ye, Fei
-
-
- Catalytic Boration of Alkyl Halides with Borane without Hydrodehalogenation Enabled by Titanium Catalyst
-
An unprecedented and general titanium-catalyzed boration of alkyl (pseudo)halides (alkyl-X, X=I, Br, Cl, OMs) with borane (HBpin, HBcat) is reported. The use of titanium catalyst can successfully suppress the undesired hydrodehalogenation products that prevail using other transition-metal catalysts. A series of synthetically useful alkyl boronate esters are readily obtained from various (primary, secondary, and tertiary) alkyl electrophiles, including unactivated alkyl chlorides, with tolerance of other reducing functional groups such as ester, alkene, and carbamate. Preliminary studies on the mechanism revealed a possible radical reaction pathway. Further extension of our strategy to aryl bromides is also demonstrated.
- Wang, Xianjin,Cui, Penglei,Xia, Chungu,Wu, Lipeng
-
supporting information
p. 12298 - 12303
(2021/05/07)
-
- Engaging Ag(0) single atoms in silver(I) salts-mediated C-B and C-S coupling under visible light irradiation
-
Silver(I) salts were found active in the borylation and sulfenylation of aryl iodides under visible light irradiation. The optimized borylation protocol using AgF did not need any additive, operated under very mild conditions, and well tolerated a broad scope of substrates and boron sources. Formation of Ag(0) single atoms (AgSAs) during the borylation reactions was examined using high-angle annular dark field aberration-corrected scanning transmission electron microscope (HAADF AC-STEM) and electron paramagnetic resonance (EPR). The activities of the silver(I) salts were affected by the anions and could be associated with their abilities in formation of AgSAs during the reactions. Kinetic studies showed that the deiodination rate was linearly correlated with the loading of AgSAs, and hence AgSAs were the true catalytic centers for the 1e?-reduction of the C-I moieties. The oxidation state of AgSAs kept 0 in both the resting and the working states. A “work-in-tandem” mechanism involving AgSAs as the catalytic centers and AgNPs as the light absorber to achieve the borylation of aryl iodides under visible light irradiation is proposed. The current approach not only provides an alternative system for borylation and sulfenylation of aryl iodides, but also reveals a new activity of silver(I) salts involving AgSAs under visible light irradiation.
- Cui, Enxin,Guo, Lirong,Li, Haibin,Qiao, Dan,Tung, Chen-Ho,Wang, Yifeng
-
p. 255 - 263
(2021/09/06)
-
- Ligand-Enabled, Iridium-Catalyzed ortho-Borylation of Fluoroarenes
-
A terpyridine derivative and an iridium complex catalyze the C-H borylation of a stoichiometric amount of a fluoroarene with high ortho-selectivity and tolerance of functional groups such as bromide, chloride, ester, ketone, amine, and in situ-borylated hydroxyl. Complex drug molecules such as haloperidol can be selectively borylated ortho to the F atom. The terpyridine ligand undergoes rollover cyclometalation to produce an N,N,C-coordinated iridium complex, which may either selectively borylate the fluoroarene by itself or undergo reductive elimination to produce a borylated ligand.
- Kuleshova, Olena,Asako, Sobi,Ilies, Laurean
-
p. 5968 - 5973
(2021/05/31)
-
- Para-selective borylation of monosubstituted benzenes using a transient mediator
-
Herein, we conceptualized a transient mediator approach that has the capability of para-selective C-H functionalization of monosubstituted aromatics. This approach is enabled by in situ generation of a versatile sulfonium salt via highly electrophilic phenoxathiine or thianthrene dication intermediate which can be readily generated from its sulfoxide with trifluoromethanesulfonic anhydride. Preliminary mechanistic study implied that the remarkable para selectivity might be related to the incredible electrophilicity of thianthrene dication intermediate. The versatility of this approach was demonstrated via para-borylation of various monosubstituted simple aromatics combining the sulfonium salt formation with further photocatalyzed transformation.
- Wu, Jie,Wang, Zengwei,Chen, Xiao-Yue,Wu, Yichen,Wang, Daoming,Peng, Qian,Wang, Peng
-
p. 336 - 340
(2019/12/09)
-
- Visible-light-mediated borylation of aryl and alkyl halides with a palladium complex
-
Palladium catalyzed visible-light-mediated borylation of inactivated aryl and alkyl halides is reported; the method provided high yields and excellent functional group compatibility. Furthermore, arylsilicates were synthesized selectively using dimethylphenylsilyl boronic ester via changing the reaction conditions. Finally, the possible reaction mechanism is determined through fluorescence quenching and turn on/off experiments.
- Zhao, Jia-Hui,Zhou, Zhao-Zhao,Zhang, Yue,Su, Xuan,Chen, Xi-Meng,Liang, Yong-Min
-
supporting information
p. 4390 - 4394
(2020/10/20)
-
- Single-Site Cobalt-Catalyst Ligated with Pyridylimine-Functionalized Metal-Organic Frameworks for Arene and Benzylic Borylation
-
We report a highly active single-site heterogeneous cobalt-catalyst based on a porous and robust pyridylimine-functionalized metal-organic frameworks (pyrim-MOF) for chemoselective borylation of arene and benzylic C-H bonds. The pyrim-MOF having UiO-68 topology, constructed from zirconium-cluster secondary building units and pyridylimine-functionalized dicarboxylate bridging linkers, was metalated with CoCl2 followed by treatment of NaEt3BH to give the cobalt-functionalized MOF-catalyst (pyrim-MOF-Co). Pyrim-MOF-Co has a broad substrate scope, allowing the C-H borylation of halogen-, alkoxy-, alkyl-substituted arenes as well as heterocyclic ring systems using B2pin2 or HBpin (pin = pinacolate) as the borylating agent to afford the corresponding arene- or alkyl-boronate esters in good yields. Pyrim-MOF-Co gave a turnover number (TON) of up to 2500 and could be recycled and reused at least 9 times. Pyrim-MOF-Co was also significantly more robust and active than its homogeneous control, highlighting the beneficial effect of active-site isolation within the MOF framework that prevents intermolecular decomposition. The experimental and computational studies suggested (pyrim?-)CoI(THF) as the active catalytic species within the MOF, which undergoes a mechanistic pathway of oxidative addition, turnover limiting σ-bond metathesis, followed by reductive elimination to afford the boronate ester.
- Akhtar, Naved,Antil, Neha,Balendra,Begum, Wahida,Kumar, Ajay,Manna, Kuntal,Newar, Rajashree,Shukla, Sakshi
-
supporting information
p. 10473 - 10481
(2020/08/05)
-
- Direct C?H Borylation of Arenes Catalyzed by Saturated Hydride-Boryl-Iridium-POP Complexes: Kinetic Analysis of the Elemental Steps
-
The saturated trihydride IrH3{κ3-P,O,P-[xant(PiPr2)2]} (1; xant(PiPr2)2=9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene) activates the B?H bond of two molecules of pinacolborane (HBpin) to give H2, the hydride-boryl derivatives IrH2(Bpin){κ3-P,O,P-[xant(PiPr2)2]} (2) and IrH(Bpin)2{κ3-P,O,P-[xant(PiPr2)2]} (3) in a sequential manner. Complex 3 activates a C?H bond of two molecules of benzene to form PhBpin and regenerates 2 and 1, also in a sequential manner. Thus, complexes 1, 2, and 3 define two cycles for the catalytic direct C?H borylation of arenes with HBpin, which have dihydride 2 as a common intermediate. C?H bond activation of the arenes is the rate-determining step of both cycles, as the C?H oxidative addition to 3 is faster than to 2. The results from a kinetic study of the reactions of 1 and 2 with HBpin support a cooperative function of the hydride ligands in the B?H bond activation. The addition of the boron atom of the borane to a hydride facilitates the coordination of the B?H bond through the formation of κ1- and κ2-dihydrideborate intermediates.
- Esteruelas, Miguel A.,Martínez, Antonio,Oliván, Montserrat,O?ate, Enrique
-
supporting information
p. 12632 - 12644
(2020/09/09)
-
- Preparation method of Varonide Keebeck key intermediate
-
The invention discloses a preparation method of a venetoclax key intermediate, belonging to the technical field of pharmaceutical synthesis. The method comprises the steps of enabling deprotonated 3,3'-dimethylcyclohexanone to react with dimethyl carbonat
- -
-
Paragraph 0056-0057; 0059-0060
(2020/09/02)
-
- A synthetic approach to dimetalated arenes using flow microreactors and the switchable application to chemoselective cross-coupling reactions
-
In spite of their potential utility, the chemistry of dimetalated arenes is still in its infancy because they are extremely difficult to synthesize. We report a novel method of synthesizing arenes bearing a boryl group and a metallic substituent, such as boryl, silyl, stannyl, or zincyl groups, in an integrated flow microreactor based on the generation and reactions of aryllithiums bearing a trialkyl borate moiety. The bimetallic arenes showed a remarkable chemoselectivity in palladium-catalyzed cross-coupling reactions. The selectivity was switched by the selection of the metal species that constitutes the dimetalated arenes as well as appropriate catalysts.
- Nagaki, Aiichiro,Ashikari, Yosuke,Kawaguchi, Tomoko,Mandai, Kyoko,Aizawa, Yoko
-
supporting information
p. 17039 - 17047
(2020/11/10)
-
- Rh-Catalyzed Base-Free Decarbonylative Borylation of Twisted Amides
-
We report the rhodium-catalyzed base-free decarbonylative borylation of twisted amides. The synthesis of versatile arylboronate esters from aryl twisted amides is achieved via decarbonylative rhodium(I) catalysis and highly selective N-C(O) insertion. The method is notable for a very practical, additive-free Rh(I) catalyst system. The method shows broad functional group tolerance and excellent substrate scope, including site-selective decarbonylative borylation/Heck cross-coupling via divergent N-C/C-Br cleavage and late-stage pharmaceutical borylation.
- Bie, Fusheng,Liu, Xuejing,Shi, Yijun,Cao, Han,Han, Ying,Szostak, Michal,Liu, Chengwei,Liu, Xuejing,Szostak, Michal,Liu, Chengwei
-
p. 15676 - 15685
(2020/11/13)
-
- Visible-Light-Induced Ni-Catalyzed Radical Borylation of Chloroarenes
-
A highly selective and general photoinduced C-Cl borylation protocol that employs [Ni(IMes)2] (IMes = 1,3-dimesitylimidazoline-2-ylidene) for the radical borylation of chloroarenes is reported. This photoinduced system operates with visible light (400 nm) and achieves borylation of a wide range of chloroarenes with B2pin2 at room temperature in excellent yields and with high selectivity, thereby demonstrating its broad utility and functional group tolerance. Mechanistic investigations suggest that the borylation reactions proceed via a radical process. EPR studies demonstrate that [Ni(IMes)2] undergoes very fast chlorine atom abstraction from aryl chlorides to give [NiI(IMes)2Cl] and aryl radicals. Control experiments indicate that light promotes the reaction of [NiI(IMes)2Cl] with aryl chlorides generating additional aryl radicals and [NiII(IMes)2Cl2]. The aryl radicals react with an anionic sp2-sp3 diborane [B2pin2(OMe)]- formed from B2pin2 and KOMe to yield the corresponding borylation product and the [Bpin(OMe)]?- radical anion, which reduces [NiII(IMes)2Cl2] under irradiation to regenerate [NiI(IMes)2Cl] and [Ni(IMes)2] for the next catalytic cycle.
- Tian, Ya-Ming,Guo, Xiao-Ning,Krummenacher, Ivo,Wu, Zhu,Nitsch, J?rn,Braunschweig, Holger,Radius, Udo,Marder, Todd B.
-
supporting information
p. 18231 - 18242
(2020/11/02)
-
- Transformations of Aryl Ketones via Ligand-Promoted C?C Bond Activation
-
The coupling of aromatic electrophiles (aryl halides, aryl ethers, aryl acids, aryl nitriles etc.) with nucleophiles is a core methodology for the synthesis of aryl compounds. Transformations of aryl ketones in an analogous manner via carbon–carbon bond activation could greatly expand the toolbox for the synthesis of aryl compounds due to the abundance of aryl ketones. An exploratory study of this approach is typically based on carbon–carbon cleavage triggered by ring-strain release and chelation assistance, and the products are also limited to a specific structural motif. Here we report a ligand-promoted β-carbon elimination strategy to activate the carbon–carbon bonds, which results in a range of transformations of aryl ketones, leading to useful aryl borates, and also to biaryls, aryl nitriles, and aryl alkenes. The use of a pyridine-oxazoline ligand is crucial for this catalytic transformation. A gram-scale borylation reaction of an aryl ketone via a simple one-pot operation is reported. The potential utility of this strategy is also demonstrated by the late-stage diversification of drug molecules probenecid, adapalene, and desoxyestrone, the fragrance tonalid as well as the natural product apocynin.
- Dai, Hui-Xiong,Li, Hanyuan,Li, Ling-Jun,Liu, Qi-Sheng,Ma, Biao,Wang, Mei-Ling,Wang, Xing,Wang, Zhen-Yu,Xu, Hui
-
p. 14388 - 14393
(2020/07/06)
-
- Reductive Electrophotocatalysis: Merging Electricity and Light to Achieve Extreme Reduction Potentials
-
We describe a new electrophotocatalytic strategy that harnesses the power of light and electricity to generate an excited radical anion with a reducing potential of -3.2 V vs SCE, which can be used to activate substrates with very high reduction potentials (Ered ≈ -1.9 to -2.9 V). The resultant aryl radicals can be engaged in various synthetically useful transformations to furnish arylboronate, arylstannane, and biaryl products.
- Kim, Hyunwoo,Kim, Hyungjun,Lambert, Tristan H.,Lin, Song
-
supporting information
p. 2087 - 2092
(2020/02/04)
-
- Visible- And UV-Light-Induced Decarboxylative Radical Reactions of Benzoic Acids Using Organic Photoredox Catalysts
-
Photoinduced decarboxylative radical reactions of benzoic acids with electron-deficient alkenes, diborane, and acetonitrile under organic photoredox catalysis conditions and mild heating afforded adducts, arylboronate esters, and the reduction product, respectively. The reaction is thought to involve single-electron transfer promoted the generation of aryl radicals via decarboxylation. A diverse range of benzoic acids were found to be suitable substrates for this photoreaction. Only our two-molecule organic photoredox system can work well for the direct photoinduced decarboxylation of benzoic acids.
- Kubosaki, Suzuka,Takeuchi, Haruka,Iwata, Yutaka,Tanaka, Yosuke,Osaka, Kazuyuki,Yamawaki, Mugen,Morita, Toshio,Yoshimi, Yasuharu
-
p. 5362 - 5369
(2020/05/19)
-
- Undirected ortho-selectivity in C–H borylation of arenes catalyzed by NHC platinum(0) complexes
-
Borylation of arenes with bis(pinacolato)diboron catalyzed by sterically encumbered NHC platinum complexes proceeds predominantly at ortho-position even in the absence of a directing group (o: m: p ratio up to 10: 3: 1). The similar borylation with pinacolborane would proceed less selectively.
- Rzhevskiy, Sergey A.,Topchiy, Maxim A.,Golenko, Yulia D.,Gribanov, Pavel S.,Sterligov, Grigorii K.,Kirilenko, Nikita Yu.,Ageshina, Alexandra A.,Bermeshev, Maxim V.,Nechaev, Mikhail S.,Asachenko, Andrey F.
-
p. 569 - 571
(2020/10/09)
-
- Borylation of Diazonium Salts by Highly Emissive and Crystalline Carbon Dots in Water
-
Efficient borylation reaction of diazonium salts in water is realized for the first time by using easily prepared, highly emissive and crystalline carbon dots. Electron-donating and electron-withdrawing groups on diazonium salts were well tolerated with moderate to good conversion efficiency. Compared with widely used metal complexes, organic dyes and quantum dots, the approach presented herein uses carbon dots, which are nontoxic and possess good biological and medicinal compatibility and high reactivity. Therefore, this approach presents a new prospective use for carbon dots in green chemistry.
- Lei, Tao,Wei, Si-Meng,Feng, Ke,Chen, Bin,Tung, Chen-Ho,Wu, Li-Zhu
-
p. 1715 - 1719
(2020/03/23)
-
- Photocatalytic C–X borylation of aryl halides by hierarchical SiC nanowire-supported Pd nanoparticles
-
Hierarchical SiC nanowire-supported Pd nanoparticles showed high photocatalytic activity for the C-X (X = Br, I) borylation of aryl halides at 30 °C. The SiC/Pd Mott-Schottky contact enhances the rapid transfer of the photogenerated electrons from SiC to the Pd nanoparticles. As a result, the concentrated energetic electrons in the Pd nanoparticles can facilitate the cleavage of C-I or C-Br bonds, which normally requires high-temperature thermal processes. We show that the present Pd/SiC photocatalyst is capable of catalyzing the transformation of a large variety of aryl halides to their corresponding boronate esters under visible light irradiation, with excellent yields.
- Jiao, Zhi-Feng,Zhao, Ji-Xiao,Guo, Xiao-Ning,Guo, Xiang-Yun
-
p. 357 - 363
(2019/12/28)
-
- Chemoselective Rhodium-Catalyzed Borylation of Bromoiodoarenes under Mild Conditions
-
A chemoselective rhodium-catalyzed borylation has been developed for the preparation of aryl boronate esters. The reaction proceeds under mild conditions with excellent selectivity for C-I bonds in bromoiodoarenes and exhibits broad functional group tolerance. This procedure can act as a complementary approach toward bifunctional arenes along with other metal-catalyzed borylations. Additionally, the reaction's utility in the preparation of monomers for metal-catalyzed cross-coupling polymerization is demonstrated.
- Varni, Anthony J.,Bautista, Michael V.,Noonan, Kevin J.T.
-
p. 6770 - 6777
(2020/07/21)
-
- Controllable factors of supported IR complex catalysis for aromatic C?H borylation
-
We have developed a catalyst in which an Ir complex and organic functionalities are coimmobilized on the silica surface. The catalytic activity for aromatic C?H borylation was significantly affected by (i) the linker length of the Ir?bipyridine complex, (ii) the coimmobilized organic functionality, and (iii) the substituents on the aromatic substrate compounds. The fine-tuned supported catalyst showed higher activity than the homogeneous Ir?bipyridine complex when using a specific substrate such as benzonitrile. We elucidated this property by conducting solid-state NMR, FT-IR, XAFS, and in situ FT-IR analysis.
- Chun, Wang-Jae,Maeda, Kyogo,Manaka, Yuichi,Motokura, Ken,Nakajima, Kiyotaka,Satter, Shazia Sharmin,Uemura, Yohei
-
p. 14552 - 14559
(2020/12/21)
-
- Visible light-promoted formation of C-B and C-S bonds under metal- A nd photocatalyst-free conditions
-
A green, efficient, photoinduced synthesis of arylboronic esters and aryl sulfides has been developed. Bench stable arylazo sulfones were used as radical precursors for a photocatalyst- A nd additive-free carbon-heteroatom bond formation under visible light. The protocols are applicable to a wide range of substrates, providing products in good yields.
- Blank, Lena,Fagnoni, Maurizio,Protti, Stefano,Rueping, Magnus
-
p. 1243 - 1252
(2019/02/26)
-
- Pd(II) Complexes with Chelating Phosphinoferrocene Diaminocarbene Ligands: Synthesis, Characterization, and Catalytic Use in Pd-Catalyzed Borylation of Aryl Bromides
-
We developed a novel, straightforward route toward Pd(II)-aminocarbene complexes bearing a P-chelating phosphinoferrocenyl substituent based on a three-component reaction of 1′-(diphenylphosphino)-1-isocyanoferrocene (1) with [PdCl2(cod)] (cod = cycloocta-1,5-diene) and nucleophilic amines. Depending on the type of the amine, the reaction produced acyclic diaminocarbenes and their saturated (imidazolin-2-ylidene) and unsaturated (imidazol-2-ylidene) cyclic counterparts (NHCs). Using (S)-2-(chloromethyl)pyrrolidine as the nucleophile, this method afforded a separable pair of stable diastereomeric bicyclic imidazolin-2-ylidene carbenes with different configurations of the planar-chiral ferrocene unit. The prepared P-chelating carbenes were characterized using spectroscopic methods, X-ray crystallography, and DFT methods. The last were used to explain the formation of isomeric open diaminocarbenes featuring NHR groups at the wing-tip position, trends in Pd-Cl bond lengths reflecting similar trans influences of the particular carbene and phosphine donors, and the results from cyclic voltammetric measurements. Furthermore, the carbenes were used as defined (pre)catalysts in Miyaura borylation of aryl bromides with bis(pinacolato)diboron. When applying the optimized catalytic system (1 mol % Pd catalyst, KOAc as the base, 2-propanol, 85 °C), this reaction produced a range of simple and substituted arylboronate pinacol esters in high yield and without biaryl side products.
- ?koch, Karel,Schulz, Ji?í,Císa?ová, Ivana,?těpni?ka, Petr
-
p. 3060 - 3073
(2019/08/20)
-
- One-pot method for preparing 4-chlorine-2'-nitrobiphenyl
-
The invention discloses a one-pot method for preparing 4-chlorine-2'-nitrobiphenyl. The method comprises the following steps: taking p-bromochlorobenzene and bis(pinacolato)diboron as starting materials, adding palladium catalyst, phosphine ligand and bas
- -
-
Paragraph 0033-0073
(2019/04/26)
-
- Redox-Neutral Borylation of Aryl Sulfonium Salts via C-S Activation Enabled by Light
-
Reported here is a novel photoinduced strategy for the borylation of aryl sulfonium salts using bis(pinacolato)diboron as the boron source. This method exploits redox-neutral aryl sulfoniums to gain access to aryl radicals via C-S bond activation upon photoexcitation under transition-metal-free conditions. Therefore, it grants access to diverse arylboronate esters with good performance from easily available aryl sulfoniums accompanied by mild conditions, operational simplicity, and easy scalability.
- Huang, Chen,Feng, Jie,Ma, Rui,Fang, Shuaishuai,Lu, Tao,Tang, Weifang,Du, Ding,Gao, Jian
-
p. 9688 - 9692
(2019/12/02)
-
- Cleavage of C(aryl)?CH3 Bonds in the Absence of Directing Groups under Transition Metal Free Conditions
-
Organic chemists now can construct carbon–carbon σ-bonds selectively and sequentially, whereas methods for the selective cleavage of carbon–carbon σ-bonds, especially for unreactive hydrocarbons, remain limited. Activation by ring strain, directing groups, or in the presence of a carbonyl or a cyano group is usually required. In this work, by using a sequential strategy site-selective cleavage and borylation of C(aryl)?CH3 bonds has been developed under directing group free and transition metal free conditions. Methyl groups of various arenes are selectively cleaved and replaced by boryl groups. Mechanistic analysis suggests that it proceeds by a sequential intermolecular oxidation and coupling of a transient aryl radical, generated by radical decarboxylation, involving a pyridine-stabilized persistent boryl radical.
- Dai, Peng-Fei,Ning, Xiao-Shan,Wang, Hua,Cui, Xian-Chao,Liu, Jie,Qu, Jian-Ping,Kang, Yan-Biao
-
supporting information
p. 5392 - 5395
(2019/03/29)
-
- Room temperature Pd(0)/Ad3P-catalyzed coupling reactions of aryl chlorides with bis(pinacolato)diboron
-
Room temperature Pd(0)/Ad3P-catalyzed cross-coupling reactions of aryl chlorides with bis(pinacolato)diboron are described. The Pd(0)/Ad3P catalyst, generated from Ad3P-coordinated acetanilide-based palladacycle complex, proved to be an efficient catalyst system for the Miyaura borylation reactions of a variety of aryl chlorides with bis(pinacolato)diboron. The mild reaction condition, the easy availability of the catalyst and good coupling yields make these reactions potentially useful in organic synthesis.
- Dong, Jie,Guo, Hui,Peng, Wei,Hu, Qiao-Sheng
-
supporting information
p. 760 - 763
(2019/02/16)
-
- Mechanism and Scope of Nickel-Catalyzed Decarbonylative Borylation of Carboxylic Acid Fluorides
-
This Article describes the development of a base-free, nickel-catalyzed decarbonylative coupling of carboxylic acid fluorides with diboron reagents to selectively afford aryl boronate ester products. Detailed studies were conducted to assess the relative rates of direct transmetalation between aryl boronate esters and diboron reagents and a bisphosphine nickel(aryl)(fluoride) intermediate. These investigations revealed that diboron reagents undergo transmetalation with this Ni(aryl)(fluoride) intermediate at rates significantly faster than their aryl boronate ester congeners. Furthermore, the reactivity of both boron reagents toward transmetalation is enhanced with increasing electrophilicity of the boron center. These mechanistic insights were leveraged to develop a catalytic decarbonylative borylation of acid fluorides that proved applicable to a variety of (hetero)aryl carboxylic acid fluorides as well as diverse diboron reagents. The acid fluorides can be generated in situ directly from carboxylic acids. Furthermore, the mechanistic studies directed the identification of various air-stable Ni pre-catalysts for this transformation.
- Malapit, Christian A.,Bour, James R.,Laursen, Simon R.,Sanford, Melanie S.
-
supporting information
p. 17322 - 17330
(2019/11/03)
-
- Copper-catalysed borylation of aryl chlorides
-
We report herein the first Cu-catalysed borylation of a wide range of aryl chlorides with different electronic and steric properties using a readily prepared NHC-stabilised Cu catalyst and KOtBu as the base with B2pin2 (pin = pinacolato) as the boron reagent. The aryl chlorides are converted into their corresponding arylboronic esters in good yields. The new procedure shows broad functional group tolerance, and B2neop2 (neop = neopentyl glycolato) can also be applied as the boron reagent.
- Kuehn, Laura,Huang, Mingming,Radius, Udo,Marder, Todd B.
-
supporting information
p. 6601 - 6606
(2019/07/16)
-
- Photocatalyzed borylation using water-soluble quantum dots
-
The synthesis of arylboronates by Sandmeyer-type reactions in the presence of water still remains a significant challenge. Herein, we report the use of water-soluble MPA-capped quantum dot (QD) photocatalysts for the borylation of diazonium salts in the presence of water. A biphasic system under mild acidic conditions remains critical to prevent decomposition and competitive disulphide bond formation. The present protocol offers a broader scope of substrates and borylating agents. Additionally, this catalytic system offers a significantly high turnover number (TON). The present methodology can effectively distinguish subtle reactivity differences between boronic acids and boronates. Mechanistic investigation suggests an excited-state electron transfer pathway.
- Chandrashekar, Hediyala B.,Maji, Arun,Halder, Ganga,Banerjee, Sucheta,Bhattacharyya, Sayan,Maiti, Debabrata
-
p. 6201 - 6204
(2019/06/07)
-
- Redox reactions of small organic molecules using ball milling and piezoelectric materials
-
Over the past decade, photoredox catalysis has harnessed light energy to accelerate bond-forming reactions. We postulated that a complementary method for the redox-activation of small organic molecules in response to applied mechanical energy could be dev
- Kubota, Koji,Pang, Yadong,Miura, Akira,Ito, Hajime
-
p. 1500 - 1504
(2020/01/08)
-
- Copper-Photocatalyzed Borylation of Organic Halides under Batch and Continuous-Flow Conditions
-
The copper-photocatalyzed borylation of aryl, heteroaryl, vinyl and alkyl halides (I and Br) was reported. The reaction proceeded using a new heteroleptic Cu complex under irradiation with blue LEDs, giving the corresponding boronic-acid esters in good to excellent yields. The reaction was extended to continuous-flow conditions to allow an easy scale-up. The mechanism of the reaction was studied and a mechanism based on a reductive quenching (CuI/CuI*/Cu0) was suggested.
- Nitelet, Antoine,Thevenet, Damien,Schiavi, Bruno,Hardouin, Christophe,Fournier, Jean,Tamion, Rodolphe,Pannecoucke, Xavier,Jubault, Philippe,Poisson, Thomas
-
supporting information
p. 3262 - 3266
(2019/02/13)
-
- Competing dehalogenation versus borylation of aryl iodides and bromides under transition-metal-free basic conditions
-
In this work, selectivity-controllable base-promoted transition-metal-free borylation and dehalogenation of aryl halides are described. Under the conditions of borylation, the dehalogenation which emerges as a competitive side reaction has been well-controlled by carefully controlling the borylation conditions. On the other hand, the dehalogenation using benzaldehyde as a hydrogen source has also been accomplished. The applications of direct radical borylation and dehalogenation of aryl halides demonstrate their synthetic practicability in pharmaceutical-oriented organic synthesis. Based on the experimental evidences, the tBuOK/1,10-Phen-triggered radical nature of both competitive reactions has been revealed.
- Niu, Yi-Jie,Sui, Guo-Hui,Zheng, Hong-Xing,Shan, Xiang-Huan,Tie, Lin,Fu, Jia-Le,Qu, Jian-Ping,Kang, Yan-Biao
-
p. 10805 - 10813
(2019/09/30)
-
- Method for catalyzing deaminized boric acid esterification or halogenation of arylamine
-
The invention belongs to the technical field of organic synthesis and in particular discloses a method for catalyzing deaminized boric acid esterification or halogenation of arylamine. The method comprises the following steps: putting arylamine and a nitroso type compound into a mixed solvent, and performing a reaction at 0-5 DEG; and further adding a raw material capable of providing a functionalization group A and a catalysis amount of a reaction accelerator, and performing deamination functionalization reaction under light radiation at 10-50 DEG C, so as to obtain a product that an amino site of the arylamine is modified by the functionalization group A. Due to synergetic control on substrates, reaction solvents, material mixing modes, temperatures, reaction accelerators and addition amounts, boric acid esterification or halogenation of arylamine, particularly electron donating substituted arylamine which is hard to treat effectively in technical schemes of the industry, can be achieved.
- -
-
Paragraph 0063; 0070-0072
(2020/01/12)
-
- Bedford-type palladacycle-catalyzed miyaura borylation of aryl halides with tetrahydroxydiboron in water
-
A mild aqueous protocol for palladium catalyzed Miyaura borylation of aryl iodides, aryl bromides and aryl chlorides with tetrahydroxydiboron (BBA) as a borylating agent is developed. The developed methodology requires low catalyst loading of Bedford-type palladacycle catalyst (0.05 mol %) and works best under mild reaction conditions at 40 °C in short time of 6 h in water. In addition, our studies show that for Miyaura borylation using BBA in aqueous condition, maintaining a neutral reaction pH is very important for reproducibility and higher yields of corresponding borylated products. Moreover, our protocol is applicable for a broad range of aryl halides, corresponding borylated products are obtained in excellent yields up to 93% with 29 examples demonstrating its broad utility and functional group tolerance.
- Zernickel, Anna,Du, Weiyuan,Ghorpade, Seema A.,Sawant, Dinesh N.,Makki, Arwa A.,Sekar, Nagaiyan,Eppinger, J?rg
-
p. 1842 - 1851
(2018/02/23)
-
- Controllable Rh(III)-Catalyzed C-H Arylation and Dealcoholization: Access to Biphenyl-2-carbonitriles and Biphenyl-2-carbimidates
-
A controllable Rh(III)-catalyzed C-H arylation and dealcoholization of benzimidates with arylboronic esters was developed, delivering various biphenyl-2-carbonitriles and biphenyl-2-carbimidates by simply tuning the reaction conditions. This approach features high efficiency, good functional group tolerance, and easy operation. It also provides an alternative pathway to thoroughly exploit the directing group in transition-metal-catalyzed C-H activations.
- Jiang, Bo,Wu, Songxiao,Zeng, Jing,Yang, Xiaobo
-
supporting information
p. 6573 - 6577
(2018/10/09)
-
- METHODS OF MANUFACTURING OF BORON COMPOUND WITHOUT TRANSITION METALS
-
The present invention refers to aryl boron compound number bath method relates to search, more particularly transition metal catalyst to a tank without the use of boron compounds number is given to the aryl organic halo [ceyn [ceyn] freight method are disclosed to boron. (by machine translation)
- -
-
Paragraph 0062; 0063
(2018/05/03)
-
- Additive- and Photocatalyst-Free Borylation of Arylazo Sulfones under Visible Light
-
We developed a photocatalyst-free and additive-free, visible light induced borylation reaction using arylazo sulfones as starting material. This protocol shows some advantages such as mild conditions, simple equipment, and wide substrate scope, which gives a complementary protocol for the preparation of arylboronates.
- Xu, Yuliang,Yang, Xinying,Fang, Hao
-
p. 12831 - 12837
(2018/10/20)
-
- Pd II -Porphyrin Complexes - The First Use as Safer and Efficient Catalysts for Miyaura Borylation
-
We have developed a simple and convenient procedure for the preparation of pinacol arylboronates from aryl/heteroaryl bromides and bis(pinacolato)diborane using a Pd II -porphyrin complex as a catalyst. Seven different Pd II -porphyrin complexes (Pd II -T m HPP, Pd II -T m CPP, Pd II -TPP, Pd II -TST p SPP, Pd II -T p CPP, Pd II -T p TP, and Pd II -T p AP) have been synthesized and investigated for their catalytic influence in the Miyaura borylation.
- Rao, Kanusu Umamaheswara,Venkateswarlu, Katta
-
supporting information
p. 1055 - 1060
(2018/03/23)
-
- Efficient Synthesis of Aryl Boronates via Cobalt-Catalyzed Borylation of Aryl Chlorides and Bromides
-
An efficient catalytic system based on a Co(II)-NHC precursor has been developed for the cross coupling of bis(pinacolato)diboron with aryl halides including aryl chlorides, affording the aryl boronates in good to excellent yields. A wide range of functional groups are tolerated under mild reaction conditions. The reaction shows excellent chemoselectivity for bromide over chloride. Preliminary mechanistic investigations show that the catalytic cycle may rely on a cobalt(I)-(III) redox couple.
- Verma, Piyush Kumar,Mandal, Souvik,Geetharani
-
p. 4049 - 4054
(2018/05/22)
-
- Metal-Free Radical Borylation of Alkyl and Aryl Iodides
-
A metal-free radical borylation of alkyl and aryl iodides with bis(catecholato)diboron (B2cat2) as the boron source under mild conditions is introduced. The borylation reaction is operationally easy to conduct and shows high functional group tolerance and broad substrate scope. Radical clock experiments and density functional theory calculations provide insights into the mechanism and rate constants for C-radical borylation with B2cat2 are disclosed.
- Cheng, Ying,Mück-Lichtenfeld, Christian,Studer, Armido
-
p. 16832 - 16836
(2018/11/23)
-
- An organic boron compound
-
PROBLEM TO BE SOLVED: To provide a production method of an arylboronic acid ester with a wide range of application substrate, using no heavy metal.SOLUTION: An organic halogen compound represented by the general formula R-X (where, X is Br or I; R is a C1 to 20 alkyl group, a C6 to 14 aryl group, a heterocyclic group comprising 1 to 3 hetero atoms selected from N, O and S, or the like) and a compound represented by the general formula (VI) are reacted in the presence of sodium alkoxide or potassium alkoxide for substitution of a substituted Si moiety and the R moiety to obtain arylboronic acid ester. (In the formula, three Rare each independently a C1 to 6 alkyl group or a C6 to 10 aryl group; and four Reach independently a C1 to 3 alkyl group.)
- -
-
Paragraph 0072-0074; 0096-0097
(2019/02/20)
-
- Palladium-Catalyzed Decarbonylative Borylation of Carboxylic Acids: Tuning Reaction Selectivity by Computation
-
Decarbonylative borylation of carboxylic acids is reported. Carbon electrophiles are generated directly after reagent-enabled decarbonylation of the in situ accessible sterically-hindered acyl derivative of a carboxylic acid under catalyst controlled conditions. The scope and the potential impact of this method are demonstrated in the selective borylation of a variety of aromatics (>50 examples). This strategy was used in the late-stage derivatization of pharmaceuticals and natural products. Computations reveal the mechanistic details of the unprecedented C?O bond activation of carboxylic acids. By circumventing the challenging decarboxylation, this strategy provides a general synthetic platform to access arylpalladium species for a wide array of bond formations from abundant carboxylic acids. The study shows a powerful combination of experiment and computation to predict decarbonylation selectivity.
- Liu, Chengwei,Ji, Chong-Lei,Hong, Xin,Szostak, Michal
-
supporting information
p. 16721 - 16726
(2018/11/30)
-
- N-benzenesulfonyl benzamide compound for inhibiting Bcl-2 proteins as well as composition and application thereof
-
The invention relates to a compound capable of inhibiting the activity of Bcl-2 anti-apoptosis protein as well as a preparation and application thereof, in particular to an N-benzenesulfonyl benzamidecompound for inhibiting Bcl-2 proteins as shown in formula (I), or a medicine composition of a crystal form, a precursor, a pharmaceutically-acceptable salt, a three-dimensional isomer, a solvent composition or a hydrate of the N-benzenesulfonyl benzamide compound. The compound and the composition containing the compound have excellent rejection capability for Bcl-2 proteins, have better pharmacokinetics parameter characteristics, can increase the medicine concentration of the compound in animal bodies, and can improve the drug curative effect and safety. (The formula (I) is shown in the description).
- -
-
Paragraph 0113; 0114; 0115
(2018/11/03)
-