- Photoredox Catalyzed Sulfonylation of Multisubstituted Allenes with Ru(bpy)3Cl2 or Rhodamine B
-
A highly regio- and stereoselective sulfonylation of allenes was developed that provided direct access to α, β-substituted unsaturated sulfone. By means of visible-light photoredox catalysis, the free radicals produced by p-toluenesulfonic acid reacted with multisubstituted allenes to obtain Markovnikov-type vinyl sulfones with Ru(bpy)3Cl2 or Rhodamine B as photocatalyst. The yield of this reaction could reach up to 91%. A series of unsaturated sulfones would be used for further transformation to some valuable compounds.
- Chen, Jingyun,Chen, Shufang,Jiang, Jun,Lu, Qianqian,Shi, Liyang,Xu, Zekun,Yimei, Zhao
-
supporting information
(2021/11/09)
-
- Selective C(sp3)?N Bond Cleavage of N,N-Dialkyl Tertiary Amines with the Loss of a Large Alkyl Group via an SN1 Pathway
-
Polar disconnection of the C(sp3)?N bond of N,N-dialkyl-substituted tertiary amines via ammonium species conventionally favored the loss of the smaller alkyl group by an SN2 displacement, while selective C(sp3)?N bond cleavage by cutting off the larger alkyl group is still underdeveloped. Herein, we present a novel Pd0-catalyzed [2+2+1] annulation, proceeding through an alkyne-directed palladacycle formation and consecutive diamination with a tertiary hydroxylamine by cleaving its N?O bond and one C(sp3)?N bond, for the rapid assembly of tricyclic indoles in a single-step transformation. Noteworthy, experimental results indicated that large tert-butyl and benzyl groups were selectively cleaved via an SN1 pathway, in the presence of a smaller alkyl group (Me, Et, iPr). Under the guidance of this new finding, tricyclic indoles bearing a removable alkyl group could be exclusively obtained by using a (α-methyl)benzyl/benzyl or tert-butyl/2-(methoxycarbonyl)ethyl mixed amino source.
- Bai, Lu,Li, Linqiang,Liu, Mengtian,Luan, Xinjun,Wu, Jiaoyu
-
supporting information
(2021/12/01)
-
- Oxidative Alkenylation of Arenes Using Supported Rh Materials: Evidence that Active Catalysts are Formed by Rh Leaching
-
This work focuses on the synthesis of supported Rh materials and study of their efficacy as pre-catalysts for the oxidative alkenylation of arenes. Rhodium particles supported on silica (Rh/SiO2; ~3.6 wt% Rh) and on nitrogen-doped carbon (Rh/NC
- Luo, Zhongwen,Whitcomb, Colby A.,Kaylor, Nicholas,Zhang, Yulu,Zhang, Sen,Davis, Robert J.,Gunnoe, T. Brent
-
p. 260 - 270
(2020/12/01)
-
- Mild and efficient desulfurization of thiiranes with MoCl5/Zn system
-
Desulfurization of a variety of thiiranes to alkenes occurs chemoselectively in high yields upon treatment with MoCl5/Zn system under mild conditions. The new methodology demonstrates high functional group tolerance toward chloro, bromo, fluoro, methoxy, ester, ether and keto groups.
- Lee, Yeong Jin,Shin, Jeong Won,Yoo, Byung Woo
-
-
- Clean protocol for deoxygenation of epoxides to alkenes: Via catalytic hydrogenation using gold
-
The epoxidation of olefin as a strategy to protect carbon-carbon double bonds is a well-known procedure in organic synthesis, however the reverse reaction, deprotection/deoxygenation of epoxides is much less developed, despite its potential utility for the synthesis of substituted olefins. Here, we disclose a clean protocol for the selective deprotection of epoxides, by combining commercially available organophosphorus ligands and gold nanoparticles (Au NP). Besides being successfully applied in the deoxygenation of epoxides, the discovered catalytic system also enables the selective reduction N-oxides and sulfoxides using molecular hydrogen as reductant. The Au NP catalyst combined with triethylphosphite P(OEt)3 is remarkably more reactive than solely Au NPs. The method is not only a complementary Au-catalyzed reductive reaction under mild conditions, but also an effective procedure for selective reductions of a wide range of valuable molecules that would be either synthetically inconvenient or even difficult to access by alternative synthetic protocols or by using classical transition metal catalysts. This journal is
- Fiorio, Jhonatan L.,Rossi, Liane M.
-
p. 312 - 318
(2021/01/29)
-
- Heterogeneously Catalyzed Selective Decarbonylation of Aldehydes by CeO2-Supported Highly Dispersed Non-Electron-Rich Ni(0) Nanospecies
-
Aldehyde decarbonylation has been extensively investigated, primarily using noble-metal catalysts; however, nonprecious-base-metal-catalyzed aldehyde decarbonylation has been hardly reported. We have established an efficient selective aldehyde decarbonylation reaction with a broad substrate scope and functional group tolerance utilizing a heterogeneous Ni(0) nanospecies catalyst supported on CeO2. The high catalytic performance is attributable to the highly dispersed and non-electron-rich Ni(0) nanospecies, which possibly suppress a side reaction producing esters and adsorbed CO-derived inhibition of the catalytic turnover, according to detailed catalyst characterization and kinetic evaluation.
- Matsuyama, Takehiro,Yatabe, Takafumi,Yabe, Tomohiro,Yamaguchi, Kazuya
-
p. 13745 - 13751
(2021/11/17)
-
- Palladium nanoparticlesin situsynthesized onCyclea barbatapectin as a heterogeneous catalyst for Heck coupling in water, the reduction of nitrophenols and alkynes
-
This study develops an effective method for thein situsynthesis of palladium nanoparticles (PdNPs) usingCyclea barbatapectin as a green reducing and stabilizing reagent. The PdNP@pectin nanocomposite was well characterized by analysis techniques such as UV-vis, FTIR, EDX, XRD, SEM, HR-TEM and STEM-mapping. Crystalline PdNPs were found to be distributed in the size range of 1-25 nm with the highest frequency of 6-12 nm. PdNP@pectin exhibited excellent recyclable catalysis activity for the Heck coupling reaction in water medium. The kinetics and recyclability of nanoparticles were investigated for the catalytic reduction ofo-,m- andp-nitrophenol. The result showed a good catalysis efficiency with five successful recycles without compromising much. In particular, the nanocomposite was used as a catalyst for the conversion of alkynes intocis-alkenes with KOH/DMF as a hydrogenation source. The reaction was also utilized effectively for the synthesis of sex pheromones, includingPlutella xylostella((Z)-11-hexadecen-1-yl acetate) andCylas formicarius((Z)-3-dodecen-1-yl(E)-2-butenoate) with the total yields of 70% and 68%, respectively. Therefore, PdNPs supported onC. barbatapectin are promising catalysis materials for application in various fields.
- Le, Van-Dung,Le, T. Cam-Huong,Chau, Van-Trung,Le, T. Ngoc-Duyen,Dang, Chi-Hien,Vo, T. To-Nguyen,Nguyen, Trinh Duy,Nguyen, Thanh-Danh
-
p. 4746 - 4755
(2021/03/22)
-
- A stable well-defined copper hydride cluster consolidated with hemilabile phosphines
-
Copper hydrides are very useful in hydrogenation reactions. We report a stable Stryker-type copper hydride reagent protected by hemilabile phosphines: [Cu8H6(dppy)6](OTf)2(Cu8-H, dppy = diphenylphosphino-2-pyridine). The metal core of this cluster has a bicapped octahedral configuration, and the copper-bound hydrides each triply bridges over a triangular face of the octahedron. This cluster is attractive due to its facile preparation and excellent stability under ambient conditions. The comparable activity and selectivity both in the stoichiometric and catalytic reactions makeCu8-Ha promising alternative to Stryker's reagent.
- Yuan, Shang-Fu,Luyang, Heng-Wang,Lei, Zhen,Wan, Xian-Kai,Li, Jiao-Jiao,Wang, Quan-Ming
-
p. 4315 - 4318
(2021/05/05)
-
- Preparation of Recyclable and Versatile Porous Poly(aryl thioether)s by Reversible Pd-Catalyzed C–S/C–S Metathesis
-
Porous organic materials (polymers and COFs) have shown a number of promising properties; however, the lability of their linkages often limits their robustness and can hamper downstream industrial application. Inspired by the outstanding chemical, mechanical, and thermal resistance of the 1D polymer poly(phenylene sulfide) (PPS), we have designed a new family of porous poly(aryl thioether)s, synthesized via a mild Pd-catalyzed C–S/C–S metathesis-based method, that merges the attractive features common to porous polymers and PPS in a single material. In addition, the method is highly modular, allowing to easily introduce application-oriented functionalities in the materials for a series of environmentally relevant applications including metal capture, metal sensing, and heterogeneous catalysis. Moreover, despite their extreme chemical resistance, the polymers can be easily recycled to recover the original monomers, offering an attractive perspective for their sustainable use. In a broader context, these results clearly demonstrate the untapped potential of emerging single-bond metathesis reactions in the preparation of new, recyclable materials.
- Morandi, Bill,Rivero-Crespo, Miguel A.,Toupalas, Georgios
-
supporting information
p. 21331 - 21339
(2021/12/17)
-
- Selective continuous flow phenylacetylene hydrogenation over Pd-biogenic calcium carbonate
-
CaCO3 obtained from Sporosarcina pasteurii isolated from agricultural soils has been employed as catalytic support for Pd that was subsequently loaded on CaCO3 by wet impregnation with a metal loading of 0.5 wt.% using Palladium acet
- Chaparro, Sandra,Martinez, José J.,Rojas, Hugo A.,Pineda, Antonio,Luque, Rafael
-
p. 181 - 186
(2020/04/23)
-
- Water-hydrogen-supplying iridium catalytic alkyne semi-reduction selective synthesis method Process for trans-olefines
-
The method comprises the following steps: DPPE, COD, a catalyst, water and alkyne are subjected to reduction reaction of alkyne in an organic solvent, and cis-olefin is generated by reaction under nitrogen protection. The ligand DPPE, the catalyst, the water and the alkyne are subjected to a reduction reaction of alkyne in an organic solvent, and a trans-olefin is generated by the reaction under nitrogen protection. The reactor for the reduction reaction is a sealed pressure-resistant reactor, the temperature of the reduction reaction is 100 - 130 °C, and the reduction reaction time is 20 - 48h. The amount of the catalyst used is 5 - 20% of the molar amount of alkyne, and the amount of water is 10 - 50 times of the molar amount of alkyne. The ligand is used in an amount 0.2 - 5 times the molar amount of catalyst. The catalyst system disclosed by the invention has extremely high chemical reaction and stereoselectivity, and cis or trans olefinic products can be synthesized at high yield. The catalytic system has strong universality on substrates, and alkynes containing various functional groups can efficiently carry out high-selectivity reduction reaction.
- -
-
Paragraph 0123-0126
(2021/09/29)
-
- Method for selectively synthesizing cis-trans-olefin by catalytic alkyne semi-reduction through water-hydrogen-supplying palladium
-
The method comprises the following steps: TEOA, NaOAc, a catalyst, water and alkyne are subjected to a reduction reaction of alkyne in an organic solvent to react to form cis-olefin. Ligand t-Bu2 PCl, The catalyst, water and the alkyne are subjected to a reduction reaction of alkyne in an organic solvent to react to form a trans-olefin. The reactor for the reduction reaction is a sealed pressure-resistant reactor, the temperature of the reduction reaction is 120 - 150 °C, and the reduction reaction time is 20 - 40h. The amount of the catalyst used is 5 - 20% of the molar amount of alkyne, and the amount of water is 10 - 50 times of the molar amount of alkyne. The ligand is used in an amount 2-5 times the molar amount of catalyst. In the invention, the catalyst system has extremely high chemical reaction and stereoselectivity, and cis or trans olefinic products can be synthesized at high yield. The catalytic system has strong universality on substrates, and alkynes containing various functional groups can efficiently carry out high-selectivity reduction reaction.
- -
-
Paragraph 0120; 0133-0136
(2021/10/30)
-
- Method for preparing 1-cyclopropylnaphthalene
-
The invention belongs to the technical field of organic synthesis, and particularly discloses a method for preparing 1-cyclopropylnaphthalene. According to the method disclosed by the invention, 1-naphthylacetophenone is adopted as a raw material, and 1-cyclopropylnaphthalene can be simply and conveniently synthesized through reduction, dehydration, cyclization and reductive dehalogenation. The method has the advantages of cheap and easily available raw materials, no need of precious metals or dangerous organic metal reagents, low raw material cost, convenient production, environmental protection and safety, and is very suitable for industrial production. The method disclosed by the invention has the advantages of high yield in each step, few byproducts and easiness in purification.
- -
-
Paragraph 0044-0046; 0050-0051; 0056-0058; 0061; 0064; ...
(2021/07/09)
-
- Recoverable palladium-catalyzed carbon-carbon bond forming reactions under thermomorphic mode: Stille and suzuki-miyaura reactions
-
The reaction of [PdCl2(CH3CN)2] and bis-4,40-(RfCH2OCH2)-2,2'-bpy (1a-d), where Rf = n- C11F23 (a), n-C10F21 (b), n-C9F19 (c) and n-C8F17 (d), respectively, in the presence of dichloromethane (CH2Cl2) resulted in the synthesis of Pd complex, [PdCl2[4,4'-bis-(RfCH2OCH2)-2,2'-bpy] (2a-d). The Pd-catalyzed Stille arylations of vinyl tributyltin with aryl halides were selected to demonstrate the feasibility of recycling usage with 2a as the catalyst using NMP (N-methyl-2-pyrrolidone) as the solvent at 120-150 °C. Additionally, recycling and electronic effect studies of 2a-c were also carried out for Suzuki-Miyaura reaction of phenylboronic acid derivatives, 4-X-C6H4-B(OH)2, (X = H or Ph) with aryl halide, 4-Y-C6H4-Z, (Y = CN, H or OCH3; Z = I or Br) in dimethylformamide (DMF) at 135-150 °C. At the end of each cycle, the product mixtures were cooled to lower temperature (e.g., -10 °C), and then catalysts were recovered by decantation with Pd leaching less than 1%. The products were quantified by gas chromatography/mass spectrometry (GC/MS) analysis or by the isolated yield. The complex 2a-catalyzed Stille reaction of aryl iodides with vinyl tributyltin have good recycling results for a total of 8 times, with a high yield within short period of time (1-3 h). Similarly, 2a-c-catalyzed Suzuki-Miyaura reactions also have good recycling results. The electronic effect studies from substituents in both Stille and Suzuki-Miyaura coupling reactions showed that electron withdrawing groups speed up the reaction rate. To our knowledge, this is the first example of recoverable fluorous long-chained Pd-catalyzed Stille reactions under the thermomorphic mode.
- Chan, Ka Long,Chiu, Chiao-Fan,Elakkat, Vijayanath,Lu, Norman,Shen, Chia-Rui,Su, Han-Chang,Tessema, Eskedar,Tsai, Zong-Lin
-
-
- Indene formation upon borane-induced cyclization of arylallenes, 1,1-carboboration, and retro-hydroboration
-
We herein report the reaction of arylallenes with tris(pentafluorophenyl)borane that yields pentafluorophenyl substituted indenes. The tris(pentafluorophenyl)borane induces the cyclization of the allene and transfers a pentafluorophenyl ring in the course of this reaction. A Hammett plot analysis and DFT computations indicate a 1,1-carboboration to be the C-C bond-forming step.
- Hasenbeck, Max,Wech, Felix,Averdunk, Arthur,Becker, Jonathan,Gellrich, Urs
-
supporting information
p. 5518 - 5521
(2021/06/12)
-
- Copper-Catalyzed Sulfonylation of Cyclobutanone Oxime Esters with Sulfonyl Hydrazides
-
A copper-catalyzed radical cross-coupling of cyclobutanone oxime esters with sulfonyl hydrazides has been developed. The copper-based catalytic system proved crucial for cleavage of the C-C bond of cyclobutanone oximes and for selective C-S bond-formation involving persistent sulfonyl-metal radical intermediates. This protocol is distinguished by the low-cost catalytic system, which does not require ligand, base, or toxic cyanide salt, and by the use of readily accessible starting materials, as well as broad substrate scope, providing an efficient approach to various diversely substituted cyano-containing sulfones.
- Dong, Bingbing,Lu, Jiansha,Bao, Honghao,Zhang, Yuanyuan,Liu, Yingguo,Leng, Yuting
-
supporting information
p. 3769 - 3776
(2021/07/14)
-
- Electrochemistry enabled selective vicinal fluorosulfenylation and fluorosulfoxidation of alkenes
-
Both sulfur and fluorine play important roles in organic synthesis, the life science, and materials science. The direct incorporation of these elements into organic scaffolds with precise control of the oxidation states of sulfur moieties is of great significance. Herein, we report the highly selective electrochemical vicinal fluorosulfenylation and fluorosulfoxidation reactions of alkenes, which were enabled by the unique ability of electrochemistry to dial in the potentials on demand. Preliminary mechanistic investigations revealed that the fluorosulfenylation reaction proceeded through a radical-polar crossover mechanism involving a key episulfonium ion intermediate. Subsequent electrochemical oxidation of fluorosulfides to fluorosulfoxides were readily achieved under a higher applied potential with the adventitious H2O in the reaction mixture.
- Jiang, Yimin,Shi, Zhaojiang,Wu, Jinnan,Wu, Shaofen,Ye, Keyin,Yu, Yi,Yuan, Yaofeng
-
supporting information
(2021/11/17)
-
- Effect of relative percentage of acid and base sites on the side-chain alkylation of toluene with methanol
-
K3PO4/NaX catalysts were prepared by loading potassium phosphate on NaX zeolite, and the catalytic performance was studied for the side-chain alkylation of toluene with methanol to styrene and ethylbenzene. Combined with the characte
- Li, Huijun,Wang, Bin,Wen, Yueli,Hao, Chunyao,Liu, Yuhua,Huang, Wei
-
p. 12703 - 12709
(2021/04/14)
-
- Mild olefin formationviabio-inspired vitamin B12photocatalysis
-
Dehydrohalogenation, or elimination of hydrogen-halide equivalents, remains one of the simplest methods for the installation of the biologically-important olefin functionality. However, this transformation often requires harsh, strongly-basic conditions, rare noble metals, or both, limiting its applicability in the synthesis of complex molecules. Nature has pursued a complementary approach in the novel vitamin B12-dependent photoreceptor CarH, where photolysis of a cobalt-carbon bond leads to selective olefin formation under mild, physiologically-relevant conditions. Herein we report a light-driven B12-based catalytic system that leverages this reactivity to convert alkyl electrophiles to olefins under incredibly mild conditions using only earth abundant elements. Further, this process exhibits a high level of regioselectivity, producing terminal olefins in moderate to excellent yield and exceptional selectivity. Finally, we are able to access a hitherto-unknown transformation, remote elimination, using two cobalt catalysts in tandem to produce subterminal olefins with excellent regioselectivity. Together, we show vitamin B12to be a powerful platform for developing mild olefin-forming reactions.
- Bam, Radha,Pollatos, Alexandros S.,Moser, Austin J.,West, Julian G.
-
p. 1736 - 1744
(2021/02/22)
-
- Switchable Chemoselectivity of Reactive Intermediates Formation and Their Direct Use in A Flow Microreactor
-
A chemoselectivity switchable microflow reaction was developed to generate reactive and unstable intermediates. The switchable chemoselectivity of this reaction enables a selection for one of two different intermediates, an aryllithium or a benzyl lithium, at will from the same starting material. Starting from bromo-substituted styrenes, the aryllithium intermediates were converted to the substituted styrenes, whereas the benzyl lithium intermediates were engaged in an anionic polymerization. These chemoselectivity-switchable reactions can be integrated to produce polymers that cannot be formed during typical polymerization reactions.
- Ashikari, Yosuke,Tamaki, Takashi,Kawaguchi, Tomoko,Furusawa, Mai,Yonekura, Yuya,Ishikawa, Susumu,Takahashi, Yusuke,Aizawa, Yoko,Nagaki, Aiichiro
-
supporting information
p. 16107 - 16111
(2021/10/12)
-
- Iridium(i) complexes bearing hemilabile coumarin-functionalised N-heterocyclic carbene ligands with application as alkyne hydrosilylation catalysts
-
A set of iridium(i) complexes of formula IrCl(κC,η2-IRCouR′)(cod) or IrCl(κC, η2-BzIRCouR′)(cod) (cod = 1,5-cyclooctadiene; Cou = coumarin; I = imidazolin-2-carbene; BzI = benzimidazolin-2-carbene) have beeen prepared from the corresponding azolium salt and [Ir(μ-OMe)(cod)]2 in THF at room temperature. The crystalline structures of 4b and 5b show a distorted trigonal bipyramidal configuration in the solid state with a coordinated coumarin moiety. In contrast, an equilibrium between this pentacoordinated structure and the related square planar isomer is observed in solution as a consequence of the hemilability of the pyrone ring. Characterization of both species by NMR was achieved at the low and high temperature limits, respectively. In addition, the thermodynamic parameters of the equilibrium, ΔHR and ΔSR, were obtained by VT 1H NMR spectroscopy and fall in the range 22-33 kJ mol-1 and 72-113 J mol-1 K-1, respectively. Carbonylation of IrCl(κC,η2-BzITolCou7,8-Me2)(cod) resulted in the formation of a bis-CO derivative showing no hemilabile behaviour. The newly synthesised complexes efficiently catalyze the hydrosilylation of alkynes at room temperature with a preference for the β-(Z) vinylsilane isomer.
- ?zdemir, Ismail,Alici, Bülent,Castarlenas, Ricardo,Karata?, Mert Olgun,Pérez-Torrente, Jesús J.,Passarelli, Vincenzo
-
p. 11206 - 11215
(2021/08/24)
-
- Polymerization of Allenes by Using an Iron(II) β-Diketiminate Pre-Catalyst to Generate High Mn Polymers
-
Herein, we report an iron(II)-catalyzed polymerization of arylallenes. This reaction proceeds rapidly at room temperature in the presence of a hydride co-catalyst to generate polymers of weight up to Mn=189 000 Da. We have determined the polymer structure and chain length for a range of monomers through a combination of NMR, differential scanning calorimetry (DSC) and gel permeation chromatography (GPC) analysis. Mechanistically, we postulate that the co-catalyst does not react to form an iron(II) hydride in situ, but instead the chain growth is proceeding via a reactive Fe(III) species. We have also performed kinetic and isotopic experiments to further our understanding. The formation of a highly unusual 1,3-substituted cyclobutane side-product is also investigated.
- Durand, Derek J.,Webster, Ruth L.,Woof, Callum R.
-
supporting information
p. 12335 - 12340
(2021/07/19)
-
- Synthesis and structure of thienyl Fischer carbene complexes of PtIIfor application in alkyne hydrosilylation
-
Transmetallation of group 6 thienylene Fischer carbene complexes to PtIIprecursors yielded new examples of neutral platinum(ii) bisethoxycarbene complexes with either 2-thienyl (T) or 5-thieno[2,3-b]thienylene (TT) carbene substituents. The use
- Lamprecht, Zandria,Malan, Frederick P.,Lotz, Simon,Bezuidenhout, Daniela I.
-
p. 6220 - 6230
(2021/04/16)
-
- Application of tungsten oxide supported monatomic catalyst in preparation of aromatic compound by hydrogenolysis of lignin
-
The invention provides application of a tungsten oxide supported monatomic catalyst in preparation of aromatic compounds by hydrogenolysis of lignin. According to the method, various beta-O-4 model molecules, organic lignin, lignosulfonate and alkali lignin are taken as raw materials, and high-selectivity cracking of aryl ether bonds is realized in a hydrogen atmosphere at the temperature of 150-240 DEG C and the pressure of 0.7-3.0 MPa to obtain the aromatic compound. Compared with the prior art, the method has the advantages that when renewable natural biomass is used as the raw material and different lignin is used as the raw material for conversion, the highest yield of the aromatic bio-oil is 72%. Raw materials are cheap and wide in source; inorganic acid and alkali are not needed, and generation of a large amount of alkali liquor in traditional lignin catalysis is avoided; the method has the characteristics of cheap tungsten-based catalyst, green reaction process, atom economy and the like, and also has the characteristics of mild reaction conditions, high activity and selectivity, environment-friendly reaction process and the like.
- -
-
Paragraph 0034-0039
(2021/05/22)
-
- Enhancing lignin depolymerizationviaa dithionite-assisted organosolv fractionation of birch sawdust
-
Sodium dithionite is utilized as a reducing agent in the organosolv fractionation of lignocellulose to concomitantly produce cellulosic pulp and promote the reductive conversion of lignin into phenolic monomers. Reactions with model compounds highlight the role of sodium dithionite with respect to the reductive cleavage of β-O-4 bonds in lignin and the consequent formation of phenolic monomers.
- Brienza, Filippo,Van Aelst, Korneel,Thielemans, Karel,Sels, Bert F.,Debecker, Damien P.,Cybulska, Iwona
-
supporting information
p. 3268 - 3276
(2021/05/21)
-
- Electrocatalytic ethylbenzene valorization using a polyoxometalate@covalent triazine framework with water as the oxygen source
-
Ethylbenzene (EB) oxidation is an important transformation in the chemical industry. Herein, PMo10V2@CTF, a noble metal free electrocatalyst, was used to promote the oxidative upgrading of EB. Under ambient conditions, 65% of EB was converted to three value-added products using water as the oxygen source yielding a total Faraday efficiency of 90.4%. This excellent performance is ascribed to the homogeneous dispersion of PMo10V2and its dual role in the electrocatalytic process.
- Chi, Yingnan,Dong, Jing,Geng, Weijie,Hu, Changwen,Li, Zhen,Liu, Chengpeng
-
supporting information
p. 7430 - 7433
(2021/08/03)
-
- Site-Selective Acceptorless Dehydrogenation of Aliphatics Enabled by Organophotoredox/Cobalt Dual Catalysis
-
The value of catalytic dehydrogenation of aliphatics (CDA) in organic synthesis has remained largely underexplored. Known homogeneous CDA systems often require the use of sacrificial hydrogen acceptors (or oxidants), precious metal catalysts, and harsh reaction conditions, thus limiting most existing methods to dehydrogenation of non- or low-functionalized alkanes. Here we describe a visible-light-driven, dual-catalyst system consisting of inexpensive organophotoredox and base-metal catalysts for room-temperature, acceptorless-CDA (Al-CDA). Initiated by photoexited 2-chloroanthraquinone, the process involves H atom transfer (HAT) of aliphatics to form alkyl radicals, which then react with cobaloxime to produce olefins and H2. This operationally simple method enables direct dehydrogenation of readily available chemical feedstocks to diversely functionalized olefins. For example, we demonstrate, for the first time, the oxidant-free desaturation of thioethers and amides to alkenyl sulfides and enamides, respectively. Moreover, the system's exceptional site selectivity and functional group tolerance are illustrated by late-stage dehydrogenation and synthesis of 14 biologically relevant molecules and pharmaceutical ingredients. Mechanistic studies have revealed a dual HAT process and provided insights into the origin of reactivity and site selectivity.
- Zhou, Min-Jie,Zhang, Lei,Liu, Guixia,Xu, Chen,Huang, Zheng
-
supporting information
p. 16470 - 16485
(2021/10/20)
-
- Norrish type II reactions of acyl azolium salts
-
The photochemical reactivity of acyl azolium salts derived from aliphatic carboxylic acids has been investigated. These species, which serve as models for intermediates generated in N-heterocyclic carbene (NHC) organocatalysis, undergo Norrish type II elimination reactions under irradiation with UVA light in analogy to structurally related aromatic ketones. Moreover, efficient Norrish-Yang cyclization was observed from an adamantyl-substituted derivative. These results further demonstrate the ability of NHCs to influence the absorption properties and photochemical reactivity of carbonyl groups during a catalytic cycle.
- Hopkinson, Matthew N.,Mavroskoufis, Andreas,Rieck, Arielle
-
-
- Electron-Catalyzed Aminocarbonylation: Synthesis of α,β-Unsaturated Amides from Alkenyl Iodides, CO, and Amines
-
Aminocarbonylation of alkenyl iodides with CO and amines proceeded under heating to produce α,β-unsaturated amides in good yields (23 examples, 71% average yield). This catalyst-free method exhibited good functional-group tolerance, and open a straightforward access to functionalized acrylamides, as illustrated by the synthesis of Ilepcimide. A hybrid radical/ionic mechanism involving chain electron transfer is proposed for this transformation.
- Picard, Baptiste,Fukuyama, Takahide,Bando, Takanobu,Hyodo, Mamoru,Ryu, Ilhyong
-
supporting information
p. 9505 - 9509
(2021/12/09)
-
- Selective Construction of C?C and C=C Bonds by Manganese Catalyzed Coupling of Alcohols with Phosphorus Ylides
-
Herein, we report the manganese catalyzed coupling of alcohols with phosphorus ylides. The selectivity in the coupling of primary alcohols with phosphorus ylides to form carbon-carbon single (C?C) and carbon-carbon double (C=C) bonds can be controlled by the ligands. In the conversion of more challenging secondary alcohols with phosphorus ylides the selectivity towards the formation of C?C vs. C=C bonds can be controlled by the reaction conditions, namely the amount of base. The scope and limitations of the coupling reactions were thoroughly evaluated by the conversion of 21 alcohols and 15 ylides. Notably, compared to existing methods, which are based on precious metal complexes as catalysts, the present catalytic system is based on earth abundant manganese catalysts. The reaction can also be performed in a sequential one-pot reaction generating the phosphorus ylide in situ followed manganese catalyzed C?C and C=C bond formation. Mechanistic studies suggest that the C?C bond was generated via a borrowing hydrogen pathway and the C=C bond formation followed an acceptorless dehydrogenative coupling pathway. (Figure presented.).
- Liu, Xin,Werner, Thomas
-
supporting information
p. 1096 - 1104
(2020/12/31)
-
- Photochemical Strategy for Carbon Isotope Exchange with CO2
-
A photocatalytic approach for carbon isotope exchange is reported. Utilizing [13C]CO2 and [14C]CO2 as primary C1 sources, this protocol allows the insertion of the desired carbon isotope into phenyl acetic acids without the need for structural modifications or prefunctionalization in one single step. The exceptionally mild conditions required for this traceless transformation are in stark contrast with those for previous methods requiring the use of harsh thermal conditions.
- Babin, Victor,Talbot, Alex,Labiche, Alexandre,Destro, Gianluca,Del Vecchio, Antonio,Elmore, Charles S.,Taran, Frédéric,Sallustrau, Antoine,Audisio, Davide
-
p. 2968 - 2976
(2021/03/09)
-
- Room temperature depolymerization of lignin using a protic and metal based ionic liquid system: an efficient method of catalytic conversion and value addition
-
Lignin is one of the most abundant biopolymer which can be utilized to synthesize various chemicalsviaits depolymerization. However, depolymerization of lignin generally occurs under very harsh conditions. Herein, we report the efficient depolymerization of ligninviadissolution in a mixed ionic liquid system: ethyl ammonium nitrate (EAN) + prolinium tetrachloromanganate(ii) [Pro]2[MnCl4] at 35 °C and under atmospheric pressure conditions. The high dissolution of lignin in ethyl ammonium nitrate provided a large number of H-bonding sites leading to the cracking of lignin and subsequent oxidative conversion by [Pro]2[MnCl4]viathe formation of metal-oxo bonding between Mn and lignin molecules. The extracted yield of vanillin was found to be 18-20% on lignin weight basisviaGC-MS analysis. The depolymerization of lignin was confirmed by SEM, FT-IR and PXRD analysis. Since lignin contains UV-absorbing functional groups, the regenerated biomass after the recovery of the depolymerized products was further utilized to synthesize a UV-shielding material. The constructed films from such a material exhibited a high SPF value of 22 and were found to be very effective by limiting the UV degradation of rhodamine B thus making the lignin valorization process economically viable and environmentally sustainable.
- Mehta, Mohit J.,Kulshrestha, Akshay,Sharma, Shweta,Kumar, Arvind
-
p. 1240 - 1247
(2021/02/26)
-
- Single step production of styrene from benzene by alkenylation over palladium-anchored thermal defect rich graphitic carbon nitride catalyst
-
Styrene is a widely used monomer in polymer industries for the manufacturing of plastics, rubbers and resins. The commercial styrene production process suffers from disadvantages such as requiring multiple steps, catalyst deactivation, high energy consump
- Avasthi, Kalpana,Bohre, Ashish,Jerman, Ivo,Kova?, Janez,Likozar, Bla?,Ter?an, Janvit
-
-
- KO-t-Bu Catalyzed Thiolation of β-(Hetero)arylethyl Ethers via MeOH Elimination/hydrothiolation
-
Herein, we describe a KO-t-Bu catalyzed thiolation of β-(hetero)arylethyl ethers through MeOH elimination to form (hetero)arylalkenes followed by anti-Markovnikov hydrothiolation to afford linear thioethers. The system works well with a variety of β-(hetero)arylethyl ethers, including electron-deficient, electron-neutral, electron-rich, and branched substrates and a range of aliphatic and aromatic thiols.
- Shigeno, Masanori,Shishido, Yoshiteru,Hayashi, Kazutoshi,Nozawa-Kumada, Kanako,Kondo, Yoshinori
-
supporting information
p. 3932 - 3935
(2021/08/24)
-
- Beyond Takai's Olefination Reagent: Persistent Dehalogenation Emerges in a Chromium(III)-μ3-Methylidyne Complex
-
Reaction of CHI3 with six equivalents of CrCl2 in THF at low temperatures affords [Cr3Cl3(μ2-Cl)3(μ3-CH)(thf)6] as the first isolable high-yield CrIII μ3-methylidyne complex. Substitution of the terminal chlorido ligands via salt metathesis with alkali-metal cyclopentadienides generates isostructural half-sandwich chromium(III)-μ3-methylidynes [CpR3Cr3(μ2-Cl)3(μ3-CH)] (CpR=C5H5, C5Me5, C5H4SiMe3). Side and decomposition products of the Cl/CpR exchange reactions were identified and structurally characterized for [Cr4(μ2-Cl)4(μ2-I)2(μ4-O)(thf)4] and [(η5-C5H4SiMe3)CrCl(μ2-Cl)2Li(thf)2]. The Cl/CpR exchange drastically changed the ambient-temperature effective magnetic moment μeff from 9.30/9.11 μB (solution/solid) to 3.63/4.32 μB (CpR=C5Me5). Reactions of [Cr3Cl3(μ2-Cl)3(μ3-CH)(thf)6] with aldehydes and ketones produce intricate mixtures of species through oxy/methylidyne exchange, which were partially identified as radical recombination products through GC/MS analysis and 1H NMR spectroscopy.
- Anwander, Reiner,Langmann, Jan,Maichle-M?ssmer, C?cilia,Scherer, Wolfgang,Trzmiel, Simon,Werner, Daniel
-
p. 20049 - 20054
(2021/08/06)
-
- Method for preparing olefine aldehyde by catalyzing terminal alkyne or terminal conjugated eneyne and diphosphine ligand used in method
-
The invention discloses a method for preparing olefine aldehyde by catalyzing terminal alkyne or terminal conjugated eneyne and a diphosphine ligand used in the method. According to the invention, indole-substituted phosphoramidite diphosphine ligand which is stable in air and insensitive to light is synthesized by utilizing a continuous one-pot method, and the indole-substituted phosphoramidite diphosphine ligand and a rhodium catalyst are used for jointly catalyzing to successfully achieve a hydroformylation reaction of aromatic terminal alkyne and terminal conjugated eneyne under the condition of synthesis gas for the first time, so that an olefine aldehyde structure compound can be rapidly and massively prepared, and particularly, a polyolefine aldehyde structure compound which is more difficult to synthesize in the prior art can be easily prepared and synthesized, and a novel method is provided for synthesis and modification of drug molecules, intermediates and chemical products.
- -
-
Paragraph 0121-0124
(2021/05/29)
-
- Visible-Light-Mediated Divergent Silylfunctionalization of Alkenes
-
1,2-Silylfunctionalization of alkenes is an efficient way to construct highly functionalized silicon-containing compounds. However, examples of 1,2-silylfunctionalization of alkenes using readily available hydrosilanes are limited. Herein, we present a visible-light-mediated divergent 1,2-silylfunctionalization of alkenes using hydrosilane under ambient conditions. A series of β-Alkoxy, β-Alkylthio, β-hydroxy, and β-indolyl silanes was obtained in good to excellent yields. Moreover, vinylsilanes were successfully prepared in the absence of an additional nucleophile.
- Zheng, Ming,Hou, Jing,Hua, Li-Li,Tang, Wan-Ying,Zhan, Le-Wu,Li, Bin-Dong
-
supporting information
p. 5128 - 5132
(2021/07/20)
-
- Selective Rhodium-Catalyzed Hydroformylation of Terminal Arylalkynes and Conjugated Enynes to (Poly)enals Enabled by a π-Acceptor Biphosphoramidite Ligand
-
The hydroformylation of terminal arylalkynes and enynes offers a straightforward synthetic route to the valuable (poly)enals. However, the hydroformylation of terminal alkynes has remained a long-standing challenge. Herein, an efficient and selective Rh-catalyzed hydroformylation of terminal arylalkynes and conjugated enynes has been achieved by using a new stable biphosphoramidite ligand with strong π-acceptor capacity, which affords various important E-(poly)enals in good yields with excellent chemo- and regioselectivity at low temperatures and low syngas pressures.
- Zhao, Jiangui,Zheng, Xueli,Tao, Shaokun,Zhu, Yuxin,Yi, Jiwei,Tang, Songbai,Li, Ruixiang,Chen, Hua,Fu, Haiyan,Yuan, Maolin
-
supporting information
p. 6067 - 6072
(2021/08/16)
-
- Visible-light-induced formation of thiavinyl 1,3-dipoles: A metal-free [3+2] oxidative cyclization with alkynes as easy access to thiophenes
-
A visible-light-induced [3+2] oxidative cyclization of various alkynes with easily available ketene dithioacetals as the previously unknown thiavinyl 1,3-dipoles in the presence of an acridine photosensitizer is reported. A series of multisubstituted thiophenes were achieved regioselectively in ≤98% yields under very mild metal-free conditions without other additives. This reaction could tolerate a wide range of substrates and achieve good efficiency in large-scale syntheses. The reaction mechanism and their applications are described in detail to reveal the reactivity of the new 1,3-dipoles and the selectivity of the reactions.
- Zheng, Baihui,Li, Xiaotong,Song, Yang,Meng, Shuyang,Li, Yifei,Liu, Qun,Pan, Ling
-
supporting information
p. 3453 - 3459
(2021/05/31)
-
- Direct Nucleophilic Substitution of Alcohols Using an Immobilized Oxovanadium Catalyst
-
Direct nucleophilic substitution of alcohols with thiols or carbon nucleophiles was achieved using a mesoporous silica-supported oxovanadium catalyst (VMPS4). Benzyl and allyl alcohols were compatible in this reaction under mild conditions, affording the products in high yields. The VMPS4 catalyst showed excellent chemoselectivity toward alcohols in the presence of acid-labile functional groups, which is in contrast to that observed for the commonly used Lewis acid catalysts, which exhibit poor selectivity. The VMPS4 catalyst could be recycled by simple centrifugation, and the catalytic activity was maintained over seven cycles.
- Nishio, Tomoya,Yoshioka, Shin,Hasegawa, Kai,Yahata, Kenzo,Kanomata, Kyohei,Akai, Shuji
-
supporting information
p. 4417 - 4422
(2021/07/16)
-
- Preparation method of Nysted reagent
-
The invention provides a preparation method of a Nysted reagent, which comprises the following steps: adding zinc scraps into an organic solvent, stirring, then adding a catalyst and dibromomethane, and reacting to obtain the Nysted reagent after the reaction is finished. According to the method, zinc powder is replaced with the zinc scraps, the step of activating the zinc powder in the zinc powder preparation process is omitted, emission of three wastes is reduced, the production cost is reduced, the production safety is improved, and the method is more suitable for industrial production and application. The method has the advantages of simple catalyst preparation, low cost, ultrahigh reaction activity, low reaction temperature, almost no need of heating, high safety and controllability.
- -
-
Paragraph 0025; 0034-0035
(2021/06/02)
-
- Cascade Reductive Friedel-Crafts Alkylation Catalyzed by Robust Iridium(III) Hydride Complexes Containing a Protic Triazolylidene Ligand
-
The synthesis of complex molecules like active pharmaceutical ingredients typically requires multiple single-step reactions, in series or in a modular fashion, with laborious purification and potentially unstable intermediates. Cascade processes offer attractive synthetic remediation as they reduce time, energy, and waste associated with multistep syntheses. For example, triarylmethanes are traditionally prepared via several synthetic steps, and only a handful of cascade routes are known with limitations due to high catalyst loadings. Here, we present an expedient catalytic cascade process to produce triarylmethanes. For this purpose, we have developed a bifunctional iridium system as the efficient catalyst to build heterotriaryl synthons via reductive Friedel-Crafts alkylation from ketones, arenes, and hydrogen. The catalytically active species were generated in situ from a robust triazolyl iridium(III) hydride complex and acid and is composed of a metal-bound hydride and a proximal ligand-bound proton for reversible dihydrogen release. These complexes catalyze the direct hydrogenation of ketones at slow rates followed by dehydration. Appropriate adjustment of the conditions successfully intercepts this dehydration and leads instead to efficient C-C coupling and Friedel-Crafts alkylation. The scope of this cascade process includes a variety of carbonyl substrates such as aldehydes, (alkyl)(aryl)ketones, and diaryl ketones as precursor electrophiles with arenes and heteroarenes for Friedel-Crafts coupling. The reported method has been validated in a swift one-step synthesis of the core structure of a potent antibacterial agent. Excellent yields and exquisite selectivities were achieved for this cascade process with unprecedentedly low iridium loadings (0.02 mol %). Moreover, the catalytic activity of the protic system is significantly higher than that of an N-methylated analogue, confirming the benefit of the Ir-H/N-H hydride-proton system for high catalytic performance.
- Albrecht, Martin,Alshakova, Iryna D.
-
p. 8999 - 9007
(2021/07/31)
-
- Self-Assembled Open Porous Nanoparticle Superstructures
-
Imparting porosity to inorganic nanoparticle assemblies to build up self-assembled open porous nanoparticle superstructures represents one of the most challenging issues and will reshape the property and application scope of traditional inorganic nanoparticle solids. Herein, we discovered how to engineer open pores into diverse ordered nanoparticle superstructures via their inclusion-induced assembly within 1D nanotubes, akin to the molecular host-guest complexation. The open porous structure of self-assembled composites is generated from nonclose-packing of nanoparticles in 1D confined space. Tuning the size ratios of the tube-to-nanoparticle enables the structural modulation of these porous nanoparticle superstructures, with symmetries such as C1, zigzag, C2, C4, and C5. Moreover, when the internal surface of the nanotubes is blocked by molecular additives, the nanoparticles would switch their assembly pathway and self-assemble on the external surface of the nanotubes without the formation of porous nanoparticle assemblies. We also show that the open porous nanoparticle superstructures can be ideal candidate for catalysis with accelerated reaction rates.
- Liu, Rongjuan,Wei, Jingjing,Wei, Yanze,Yang, Zhijie,Zhang, Fenghua
-
supporting information
(2021/08/20)
-
- Poisoning effect of N-containing compounds on performance of Raney nickel in transfer hydrogenation
-
The effect of amines, imines and heterocycle compounds on conversion has been studied in transfer hydrogenation of camphor and 2-PrOH catalyzed by Raney nickel. Small amount (5 mol% to nickel) of N-containing compound significantly decreases catalyst activity. It has been shown that the poisoning effect mostly depends on molecular size of amines and heterocyclic compounds. For aniline and cyclohexylamine the dependence of camphor conversion on poison/nickel ratio was obtained. Additionally, benzaldehyde, cinnamaldehyde demonstrated higher reactivity compared corresponding imines under transfer hydrogenation conditions. Obtained data explain low activity of nickel-based catalysts when N-containing compounds are presented in reaction mixture.
- Martyanov, Oleg N.,Philippov, Alexey A.
-
-
- Radical induced disproportionation of alcohols assisted by iodide under acidic conditions
-
The disproportionation of alcohols without an additional reductant and oxidant to simultaneously form alkanes and aldehydes/ketones represents an atom-economical transformation. However, only limited methodologies have been reported, and they suffer from a narrow substrate scope or harsh reaction conditions. Herein, we report that alcohol disproportionation can proceed with high efficiency catalyzed by iodide under acidic conditions. This method exhibits high functional group tolerance including aryl alcohol derivatives with both electron-withdrawing and electron-donating groups, furan ring alcohol derivatives, allyl alcohol derivatives, and dihydric alcohols. Under the optimized reaction conditions, a 49% yield of 5-methyl furfural and a 49% yield of 2,5-diformylfuran were obtained simultaneously from 5-hydroxymethylfurfural. An initial mechanistic study suggested that the hydrogen transfer during this redox disproportionation occurred through the inter-transformation of HI and I2. Radical intermediates were involved during this reaction.
- Huang, Yang,Jiang, Haiwei,Li, Teng,Peng, Yang,Rong, Nianxin,Shi, Hexian,Yang, Weiran
-
supporting information
p. 8108 - 8115
(2021/10/29)
-
- Olefination via Cu-Mediated Dehydroacylation of Unstrained Ketones
-
The dehydroacylation of ketones to olefins is realized under mild conditions, which exhibits a unique reaction pathway involving aromatization-driven C-C cleavage to remove the acyl moiety, followed by Cu-mediated oxidative elimination to form an alkene between the α and β carbons. The newly adopted N′-methylpicolinohydrazonamide (MPHA) reagent is key to enable efficient cleavage of ketone C-C bonds at room temperature. Diverse alkyl- and aryl-substituted olefins, dienes, and special alkenes are generated with broad functional group tolerance. Strategic applications of this method are also demonstrated.
- Dong, Guangbin,Xu, Yan,Zhou, Xukai
-
supporting information
p. 20042 - 20048
(2021/12/03)
-
- An Iron-Based Dehydration Catalyst for Selective Formation of Styrene
-
We report the synthesis and crystal structure of [Fe(OTf)2(FOX)] (A). This robust iron(II) complex was successfully applied as a homogeneous catalyst for the dehydration of 1-phenylethanol to styrene. Even at low catalyst loadings and moderate reaction temperatures,A showed a high catalytic efficiency. It was found to selectively activate the benzylic alcohol group of 1-phenylethanol. This is challenging since the vinyl system of styrene is highly reactive. In contrast to most of the other dehydration processes, the use of a Br?nsted acid was not necessary. Furthermore, mechanistic insights into this E1-type transformation and its competing SN1-type side reactions are reported. [Fe(cHexOH)(OTf)(FOX)][OTf] (B), an alcohol adduct ofA, [Fe(H2O)2(FOX)][OTf]2(C), the completely hydrated derivative ofA, and [μ-O{Fe(OTf)(FOX)}2][OTf]2(D), a dinuclear oxidation product ofA, were also characterized and are discussed.
- Brennessel, William W.,Jones, William D.,Nachtigall, Olaf,Vanderweide, Andrew I.
-
p. 10885 - 10891
(2021/09/14)
-
- Rhodium-Catalyzed Regioselective Hydroformylation of Alkynes to α,β-Unsaturated Aldehydes Using Formic Acid
-
A rhodium-catalyzed hydroformylation of alkynes with formic acid was developed. The method provides α,β-unsaturated aldehydes in high yield and E-selectivity without the need to handle toxic CO gas.
- Fan, Chao,Hou, Jing,Chen, Yu-Jia,Ding, Kui-Ling,Zhou, Qi-Lin
-
supporting information
p. 2074 - 2077
(2021/04/05)
-
- Dehydrogenative alcohol coupling and one-pot cross metathesis/dehydrogenative coupling reactions of alcohols using Hoveyda-Grubbs catalysts
-
In this study,in situformed ruthenium hydride species that were generated from Grubbs type catalysts are used as efficient catalysts for dehydrogenative alcohol coupling and sequential cross-metathesis/dehydrogenative coupling reactions. The selectivity of Grubbs first generation catalysts (G1) in dehydrogenative alcohol coupling reactions can be tuned for the ester formation in the presence of weak bases, while the selectivity can be switched to the β-alkylated alcohol formation using strong bases. The performance of Hoveyda-Grubbs 2nd generation catalyst (HG2) was improved in the presence of tricyclohexylphosphine for the selective synthesis of ester derivatives with weak and strong bases in quantitative yields. Allyl alcohol was used as self and cross-metathesis substrate for the HG2 catalyzed sequential cross-metathesis/dehydrogenative alcohol coupling reactions to obtain γ-butyrolactone and long-chain ester derivatives in quantitative yields.
- ?zer, Halenur,Arslan, Dilan,?ztürk, Bengi ?zgün
-
p. 5992 - 6000
(2021/04/12)
-
- The effect of viscosity on the coupling and hydrogen-abstraction reaction between transient and persistent radicals
-
The effect of viscosity on the radical termination reaction between a transient radical and a persistent radical undergoing a coupling reaction (Coup) or hydrogen abstraction (Abst) was examined. In a non-viscous solvent, such as benzene (bulk viscosity bulk 99% Coup/Abst selectivity, but Coup/Abst decreased as the viscosity increased (89/11 in PEG400 at 25 °C [bulk = 84 mPa s]). While bulk viscosity is a good parameter to predict the Coup/Abst selectivity in each solvent, microviscosity is the more general parameter. Poly(methyl methacrylate) (PMMA)-end radicals had a more significant viscosity effect than polystyrene (PSt)-end radicals, and the Coup/Abst ratio of the former dropped to 50/50 in highly viscous media (bulk = 3980 mPa s), while the latter maintained high Coup/ Abst selectivity (84/16). These results, together with the low thermal stability of dormant PMMA-TEMPO species compared with that of PSt-TEMPO species, are attributed to the limitation of the nitroxide-mediated radical polymerization of MMA. While both organotellurium and bromine compounds were used as precursors of radicals, the former was superior to the latter for the clean generation of radical species.
- Li, Xiaopei,Kato, Tatsuhisa,Nakamura, Yasuyuki,Yamago, Shigeru
-
p. 966 - 972
(2021/04/29)
-