- Method for preparing crotonaldehyde from ethanol
-
The invention relates to a method for preparing crotonaldehyde from ethanol. The method comprises the following steps of firstly, dehydrogenating ethanol into acetaldehyde by using a metal-loaded semiconductor photocatalyst under illumination, then carrying out aldol condensation under base catalysis, and finally dehydrating under a heating condition to form crotonaldehyde. The method starts from ethanol and has the advantages of wide raw material sources, mild reaction conditions and the like.
- -
-
Paragraph 0019-0048
(2021/06/13)
-
- Dual Role of the Rhodium(III) Catalyst in C-H Activation: [4 + 3] Annulation of Amide with Allylic Alcohols to 7-Membered Lactams
-
[4 + 3] annulation of primary and secondary benzamide and cinnamamide derivatives using allyl alcohol as a coupling partner catalyzed by Rh(III) is reported, where Rh(III) is playing a dual role of an oxidant and a catalyst for C-H activation. The Rh-catalyst oxidizes allyl alcohol to its carbonyl derivative, and the in situ-generated carbonyl compound reacts with benzamide in the presence of the Rh-catalyst, forming the corresponding alkylated products. Mechanistic studies show that AgSbF6 is also playing a dual role. Apart from being a halide scavenger, AgSbF6 catalyzes the cyclization of the alkylated product, forming the desired lactam. The current method has good synthetic application and is useful for synthesizing a few biologically active compounds that can act as the dopamine D3 receptor ligand, including berberine-like analogues. The deuteration study and control experiments helped us to propose the mechanism.
- Sherikar, Mahadev Sharanappa,Devarajappa, Ravi,Prabhu, Kandikere Ramaiah
-
supporting information
p. 4625 - 4637
(2021/04/06)
-
- Rapid, chemoselective and mild oxidation protocol for alcohols and ethers with recyclable N-chloro-N-(phenylsulfonyl)benzenesulfonamide
-
Chlorine is the 20th most abundant element on the earth compared to bromine, iodine, and fluorine, a sulfonimide reagent, N-chloro-N-(phenylsulfonyl)benzenesulfonamide (NCBSI) was identified as a mild and selective oxidant. Without activation, the reagent was proved to oxidize primary and secondary alcohols as well as their symmetrical and mixed ethers to corresponding aldehydes and ketones. With recoverable PS-TEMPO catalyst, selective oxidation over chlorination of primary and secondary alcohols and their ethers with electron-donating substituents was achieved. The reagent precursor of NCBSI was recovered quantitatively and can be reused for synthesizing NCBSI.
- Badani, Purav,Chaturbhuj, Ganesh,Ganwir, Prerna,Misal, Balu,Palav, Amey
-
supporting information
(2021/06/03)
-
- Copper-Containing Catalysts Based on Cerium–Zirconium Oxide Supports in Ethanol Conversion Reaction According to In Situ IR Spectroscopic Data
-
Abstract: Copper-containing catalysts based on CeO2–ZrO2 solid solutions were prepared by the Pecini method and studied using a set of physicochemical methods. It was found that the bond strength of oxygen on the catalyst surface, which depends on the properties of supported copper oxide clusters and a ratio between CeO2 and ZrO2 in the support, plays a main role in ethanol conversion. Ethoxy groups, acetate and formate complexes, and condensation products were detected as main surface intermediates formed in the course of ethanol conversion on the catalysts. The decomposition of the formate complexes was the key stage in the formation of hydrogen. Its appearance on the surface of the catalysts was due to the competition between the reactions of formate and acetate complex formation for oxygen with suitable properties.
- Ilichev, A. N.,Korchak, V. N.,Matyshak, V. A.,Sil’chenkova, O. N.
-
p. 404 - 417
(2021/06/14)
-
- A study on the cataluminescence of propylene oxide on FeNi layered double hydroxides/graphene oxide
-
In this work, FeNi layered double hydroxides/graphene oxide (FeNi LDH/GO) was prepared, which exhibits excellent selective cataluminescent performance towards propylene oxide. The selectivity and sensitivity of the cataluminescence (CTL) reaction were investigated in detail. Moreover, the catalytic reaction mechanism, including the intermediate products and the conversion of reactants to products, was discussed based on both the experimental and computational results. Furthermore, the proposed FeNi LDH/GO based CTL sensor was successfully applied for the determination of propylene oxide residue in fumigated raisins, which indicates extensive application potential for rapid food safety evaluation.
- Li, Ming,Hu, Yufei,Li, Gongke
-
p. 11823 - 11830
(2021/07/11)
-
- Lewis Acidic Boranes, Lewis Bases, and Equilibrium Constants: A Reliable Scaffold for a Quantitative Lewis Acidity/Basicity Scale
-
A quantitative Lewis acidity/basicity scale toward boron-centered Lewis acids has been developed based on a set of 90 experimental equilibrium constants for the reactions of triarylboranes with various O-, N-, S-, and P-centered Lewis bases in dichloromethane at 20 °C. Analysis with the linear free energy relationship log KB=LAB+LBB allows equilibrium constants, KB, to be calculated for any type of borane/Lewis base combination through the sum of two descriptors, one for Lewis acidity (LAB) and one for Lewis basicity (LBB). The resulting Lewis acidity/basicity scale is independent of fixed reference acids/bases and valid for various types of trivalent boron-centered Lewis acids. It is demonstrated that the newly developed Lewis acidity/basicity scale is easily extendable through linear relationships with quantum-chemically calculated or common physical–organic descriptors and known thermodynamic data (ΔH (Formula presented.)). Furthermore, this experimental platform can be utilized for the rational development of borane-catalyzed reactions.
- Mayer, Robert J.,Hampel, Nathalie,Ofial, Armin R.
-
supporting information
p. 4070 - 4080
(2021/01/29)
-
- Amorphous Nickel Phosphide Nanoparticles for Selective Hydrogenation of Cinnamaldehyde
-
Abstract: The selective hydrogenation of α,β-unsaturated aldehydes plays a crucial role in industrial production, and an efficient non-noble metal catalyst for it has been pursued to reduce the cost. Herein, we report an amorphous nickel phosphide for the selective hydrogenation of cinnamaldehyde. Compared to crystalline nickel phosphide, amorphous nickel phosphide showed both high activity and high selectivity to target products. Its catalytic performance was also better than that of commercial Pd/C catalyst. In addition, initial P/Ni ratio was found to be an important factor to affect the activity of amorphous nickel phosphide. High initial P/Ni ratio led to high activity owing to small particles, high surface area and strong metallicity of as-synthesized catalyst. Moreover, excellent catalytic performances of amorphous nickel phosphide were observed in the selective hydrogenation of different α,β-unsaturated aldehydes and ketones. Graphic Abstract: [Figure not available: see fulltext.].
- Liu, Ping,Zhu, Ya-Lu,Zhou, Lei,Zhang, Wei-Hong,Li, Yong-Xin
-
p. 2695 - 2702
(2020/03/23)
-
- IBX-TfOH mediated oxidation of alcohols to aldehydes and ketones under mild reaction conditions
-
An efficient, practical and facile procedure has been developed for the oxidation of primary and secondary alcohols using IBX-TfOH catalytic system in 1,4-dioxane at ambient temperature. The reaction affords quantitative yields of the corresponding carbonyl compounds without the formation of over oxidized products. The present synthetic protocol is compatible with a variety of substrates having arene, heteroarene and alkene functionalities. The developed synthetic protocol can be used for higher scale reactions as evident by the oxidation of alcohol at 1 g scale in higher yields by a simple filtration process.
- Kumar, Kamlesh,Kumar, Prashant,Joshi, Penny,Rawat, Diwan S
-
supporting information
(2020/03/04)
-
- A kinetic and mechanistic study of the osmium(VIII)-catalysed oxidation of crotyl alcohol by hexacyanoferrate(III) in aqueous Alkaline medium
-
The kinetics and mechanism of the osmium(VIII)-catalysed oxidation of crotyl alcohol by hexacyanoferrate(III) in aqueous alkaline medium is studied. The role of the osmium(VIII) catalyst is delineated to account for the experimental observations. A plausible reaction mechanism is suggested. Activation parameters such as the energy and entropy of activation are evaluated by employing the Eyring equation and are found to be 36.833 kJ mol?1 and ?141.518 J K?1 mol?1, respectively.
- Sharma, Priyamvada,Sailani, Riya,Meena, Anita,Khandelwal, Chandra Lata
-
p. 295 - 300
(2020/01/28)
-
- Magnetic core-shell Fe3O4?Cu2O and Fe3O4?Cu2O-Cu materials as catalysts for aerobic oxidation of benzylic alcohols assisted by TEMPO and: N -methylimidazole
-
In this work, core-shell Fe3O4?Cu2O and Fe3O4?Cu2O-Cu nanomaterials for aerobic oxidation of benzylic alcohols are reported with 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) and N-methylimidazole (NMI) as the co-catalysts. To anchor Cu2O nanoparticles around the magnetic particles under solvothermal conditions, the magnetic material Fe3O4 was modified by grafting a layer of l-lysine (l-Lys) to introduce -NH2 groups at the surface of the magnetic particles. With amine groups as the anchor, Cu(NO3)2 was used to co-precipitate the desired Cu2O by using ethylene glycol as the reducing agent. Prolonging the reaction time would lead to over-reduced forms of the magnetic materials in the presence of copper, Fe3O4?Cu2O-Cu. The nanomaterials and its precursors were fully characterized by a variety of spectroscopic techniques. In combination with both TEMPO and NMI, these materials showed excellent catalytic activities in aerobic oxidation of benzylic alcohols under ambient conditions. For most of the benzylic alcohols, the conversion into aldehydes was nearly quantitative with aldehydes as the sole product. The materials were recyclable and robust. Up to 7 repeat runs, its activity dropped less than 10%. The over-reduced materials, Fe3O4?Cu2O-Cu, exhibited slightly better performance in durability. The magnetic properties allowed easy separation after reaction by simply applying an external magnet.
- Liu, Xiaoming,Lu, Chunxin,Senthilkumar, Samuthirarajan,Shen, Zhongquan,Xu, Binyu,Zhong, Wei
-
p. 26142 - 26150
(2020/08/21)
-
- Oxidation of crotyl alcohol by N-chloro-4-methylbenzene sulphonamide in acidic medium and in alkaline media in the presence of os(VIII) catalyst-a kinetic pathway
-
The kinetic pathway of oxidation of crotyl alcohol by sodium salt of N -chloro-4-methylbenzene sulphonamide (chloramine-T) in acidic and alkaline medium has been studied. The speciation of chloramine-T has been made to suggest a proper and reasonable reaction mechanism. The thermodynamic quantities such as activation energy and activation entropy are evaluated in acidic as well as in catalysed alkaline medium. An anticipated reaction mechanism has been suggested.
- Khandelwal, Chandra Lata,Meena, Anita,Sailani, Riya,Sharma, Priyamvada
-
p. 950 - 970
(2020/09/18)
-
- Kinetic study for oligomerization of acetaldehyde over cation exchange resin
-
Several industrially important liquid phase reactions which involve acetaldehyde as the main reactant are practised in the presence of acidic catalyst. However, under these conditions, acetaldehyde also undergoes oligomerization via self-aldol condensation reactions to form multiple side products thereby reducing the selectivity of the desired product. In this work, we investigate the detailed kinetics of oligomerization over a commonly used commercial cation exchange resin, Amberlyst-15 as catalyst. It is found that, crotonaldehyde and subsequent heavy aldols are formed in the reaction. Molecular weight distribution of the oligomers formed during the reaction is verified with Flory's statistical method. Kinetic studies are performed in an autoclave over a temperature range of 343?363 K. The effect of different parameters such as temperature, concentration, catalyst loading, and catalyst reusability is examined. A kinetic model based on Langmuir-Hinshelwood-Hougen-Watson (LHHW) rate expression is proposed to explain acetaldehyde oligomerization in the presence of acidic resin.
- Kamal, Sumit,Mahajani, Sanjay
-
-
- MgO?SiO2 Catalysts for the Ethanol to Butadiene Reaction: The Effect of Lewis Acid Promoters
-
MgO?SiO2 samples, having the composition of natural talc (NT), were obtained by co-precipitation (CP) and wet kneading (WK) methods. The materials were used as catalysts of the ethanol-to-1,3-butadiene reaction. ZnO, Ga2O3 and In2O3 were tested as promoters. The catalyst WK gave the highest 1,3-Butadiene (BD) yield among the non-promoted catalysts because of the high specific surface area and strong basicity. Results suggested that over the neat WK catalyst the acetaldehyde coupling to crotonaldehyde was the rate-determining process step. Formation of crotyl alcohol intermediate was substantiated to proceed by the hydrogen transfer reaction between crotonaldehyde and ethanol. The crotyl alcohol intermediate becomes dehydrated to BD or, in a disproportionation side reaction, it forms crotonaldehyde and butanol. The promoter was found to increase the surface concentration of the reactant and reaction intermediates, thereby increases the rates of conversion and BD formation. The order of promoting efficiency was Zn>In>Ga.
- Szabó, Blanka,Novodárszki, Gyula,Pászti, Zoltán,Domján, Attila,Valyon, József,Hancsók, Jen?,Barthos, Róbert
-
p. 5686 - 5696
(2020/09/22)
-
- Conversion of ethanol to 1,3-butadiene over high-performance Mg-ZrO: X/MFI nanosheet catalysts via the two-step method
-
Mg-Zr/MFI nanosheet (NS) catalysts were prepared by a wet impregnation method for ethanol conversion to 1,3-butadiene (1,3-BD) via the two-step method in a dual fixed bed reaction system. Compared with Zr catalysts loaded on MFI(micro) or commercial SiO2, 16%Zr/MFI(NS) gave the better performance, with 42.3% 1,3-BD selectivity and 60.5% total conversion of ethanol and acetaldehyde. Introducing 1.2 wt% Mg to 16%Zr/MFI(NS) improved the 1,3-BD selectivity to 54.7% at the expense of a 6% drop in the catalytic activity. Reaction conditions imposed remarkable influence on the reaction results. When the reaction was conducted at 350 °C, a WHSV of 1.44 h-1 and a 2 : 1 ratio of ethanol to acetaldehyde, the 1,3-BD selectivity reached 74.6% with 41.5% total conversion. Such high performance over 1.2%Mg-16%Zr/MFI(NS) was maintained well in a 7 day (168 h) run without deactivation. The catalysts were characterized by XRD, N2 adsorption, UV-Vis, Raman, and infra-red spectroscopy, NH3-TPD, TEM and TG. The results showed that the Zr species on MFI(NS) are well distributed with the highest dispersion as compared with the microporous MFI and SiO2 supported Zr catalysts. The Zr species preferentially occupied the silanol nests of MFI(NS) and eliminated the Br?nsted acid sites at 4 wt% Zr loading, and afforded abundant Lewis acid sites in the form of Zr(OH)(OSi)3 when the Zr loading was increased to 16 wt%. As a base site, Mg is inactive for MPVO reduction but slightly active for the aldol condensation of acetaldehyde, both of which are much inferior to that of the Lewis acid sites. The 1.2%Mg-16%Zr/MFI(NS) catalyst with hierarchical structures of meso- and micro-pores, abundant weak Lewis acid sites but nearly no Br?nsted acid sites is competent for the two-step ethanol to 1,3-BD conversion process with high activity, selectivity and stability.
- Li, Lin,Li, Xianquan,Pan, Xiaoli,Pang, Jifeng,Wang, Chan,Zhang, Tao,Zheng, Mingyuan
-
p. 2852 - 2861
(2020/06/17)
-
- Synthesis of α,β- and β-Unsaturated Acids and Hydroxy Acids by Tandem Oxidation, Epoxidation, and Hydrolysis/Hydrogenation of Bioethanol Derivatives
-
We report a reaction platform for the synthesis of three different high-value specialty chemical building blocks starting from bio-ethanol, which might have an important impact in the implementation of biorefineries. First, oxidative dehydrogenation of ethanol to acetaldehyde generates an aldehyde-containing stream active for the production of C4 aldehydes via base-catalyzed aldol-condensation. Then, the resulting C4 adduct is selectively converted into crotonic acid via catalytic aerobic oxidation (62 % yield). Using a sequential epoxidation and hydrogenation of crotonic acid leads to 29 % yield of β-hydroxy acid (3-hydroxybutanoic acid). By controlling the pH of the reaction media, it is possible to hydrolyze the oxirane moiety leading to 21 % yield of α,β-dihydroxy acid (2,3-dihydroxybutanoic acid). Crotonic acid, 3-hydroxybutanoic acid, and 2,3-dihydroxybutanoic acid are archetypal specialty chemicals used in the synthesis of polyvinyl-co-unsaturated acids resins, pharmaceutics, and bio-degradable/ -compatible polymers, respectively.
- Faria, Jimmy,Komarneni, Mallik R.,Li, Gengnan,Pham, Tu,Resasco, Daniel E.,Ruiz, Maria P.,Santhanaraj, Daniel
-
supporting information
p. 7456 - 7460
(2020/03/23)
-
- METHOD FOR PRODUCING CROSS ALDOL CONDENSATE USING AMINE-CARRYING CATALYST
-
PROBLEM TO BE SOLVED: To provide a method for producing a cross aldol condensate with improved selectivity of a cross aldol condensate, the target material. SOLUTION: A method for producing a cross aldol condensate has a step of performing a cross aldol condensation reaction of different two substrates in the presence of an amine-carrying catalyst with an amine compound immobilized to a carrier, the substrate containing two compounds selected from aldehyde and/or ketone having α hydrogen. SELECTED DRAWING: None COPYRIGHT: (C)2021,JPO&INPIT
- -
-
Paragraph 0033-0034; 0043
(2021/01/16)
-
- Selective oxidation of crotyl alcohol by Au: X Pd bimetallic pseudo-single-atom catalysts
-
AuPd bimetallic single-atom catalysts are being extensively studied as selective catalysts for hydrogenation and oxidation reactions due to their high selectivity. Previous work in our group has shown that alloy and core-shell AuPd nanoparticle catalysts can selectively oxidize crotyl alcohol to crotonaldehyde at room temperature in base-free conditions. In this work, we discuss the synthesis, extensive characterization, and activity for crotyl alcohol oxidation across a series of AuxPd catalysts (x = 4, 3, 2, and 1) made by both co-reduction and sequential reduction strategies, in order to examine whether single-atom systems can lead to improved activity and/or selectivity for this reaction. X-ray absorption spectroscopy data shows that both co-and sequentially-reduced Au4Pd catalysts have very small Pd-Pd coordination numbers, with values of 1.2 ± 0.3 and 1.6 ± 0.3, respectively, which indicates that they are closest to single-atom systems. The co-Au4Pd catalyst, with the lowest Pd-Pd CN, also exhibits the highest selectivity for the selective oxidation of crotyl alcohol to crotonaldehyde. We were further able to enhance the selectivity of the AuPd nanoparticle catalysts by incorporating vinyl acetate as a hydride scavenger. We show in this paper that dispersing Pd in a Au matrix can lead to very selective catalysts while also lowering the amount of Pd needed in the system.
- Chivers, Brandon A.,Scott, Robert W. J.
-
p. 7706 - 7718
(2020/11/27)
-
- Structural activity of unsaturated alcohols and oxidation towards pyrazinium chlorochromate
-
The kinetics of oxidation of allyl, crotonyl, styryl carbinol by pyrazinium chlorochromate (PzCC) has been investigated in 60% acetic acid medium.The order was found to be first order with respect to [oxidant], [substrate] and [H+.]. The rate of the oxidant decreased with increase in [PzCC] and increased with increase in the percentage of acetic acid. The addition of sodium perchlorate did not show any change in rate constant. Based on the kinetic results, the mechanism between unsaturated alcohol and chromium (VI) oxidant is proposed. The reactivity of unsaturated alcohols was observed to be allyl alcohol crotonyl alcohol styryl carbinol.
- Anbarasu,Ilavenil
-
p. 436 - 441
(2019/06/07)
-
- A rational design of a Pd-based catalyst with a metal-metal oxide interface influencing molecular oxygen in the aerobic oxidation of alcohols
-
In a green process for selective oxidation of alcohols, the utilization of molecular oxygen as a primary oxidant is the most critical step. Although many palladium (Pd)-based catalysts have shown potential, the role of different Pd-species in the aerobic oxidation reaction is still a matter of discussion. There have been diverse reports, which describe either Pd0 or Pd2+ as the individual species responsible for the aerobic oxidation of alcohols. Herein we demonstrate that the presence of both Pd0 and Pd2+ species with a Pd-PdO interface stabilized on the surface of reduced graphene oxide (rGO) is important for the oxidation of alcohols. With an optimum Pd2+/Pd0 ratio, the catalyst catalyzes the oxidation of benzyl alcohol in water with oxygen, resulting in a turnover frequency (TOF) of up to 18 000 h-1 with 98% selectivity towards the aldehyde. It is proposed that both metallic Pd and its oxide domains, when co-existing with a phase boundary between them, promote the activation of oxygen. On the other hand, rGO provides surface functionalities for the formation and stabilization of Pd-PdO nanoclusters enabling the catalyst to be both stable and reusable. Using histidine as a scavenger for singlet oxygen, we have also determined the importance of oxygen-activation in the reaction. Furthermore, the catalyst is capable of converting various other alcohols into the corresponding carbonyl compounds. Comparison of various catalysts shows that the Pd-PdO@rGO catalyst is the most efficient in terms of TOF, conversion and selectivity for the oxidation of benzyl alcohol using oxygen compared to the reported Pd-based catalysts, particularly when performed under milder reaction conditions. Therefore, the result on Pd-catalyst designing is believed to be of significance for the further developments in the environmentally benign oxidation processes involving molecular oxygen as the oxidant.
- Meher, Songhita,Rana, Rohit Kumar
-
p. 2494 - 2503
(2019/05/17)
-
- Production and testing of technical catalysts based on MnO2 for the abatement of aromatic volatile compounds at the laboratory and pilot plant scales
-
Shaping is a crucial step to produce technical catalysts that remains as some sort of dark art for catalytic researchers in academia. This contribution discusses aspects concerning the fabrication of technical catalysts based on MnO2 powders ai
- Baldovino-Medrano, Víctor Gabriel,Kartheuser, Beno?t,Gaigneaux, Eric M.
-
-
- Ethanol to Butanol Conversion over Bifunctional Zeotype Catalysts Containing Palladium and Zirconium
-
Abstract: A study of the kinetics of ethanol conversion in the presence of Zr-containing zeolites BEA doped with palladium particles has revealed the order of formation of the main reaction products. It has been shown that the primary processes are ethanol dehydrogenation to acetaldehyde on Pd sites and ethanol dehydration to diethyl ether on the acid sites of the catalyst. After that, acetaldehyde undergoes the aldol–croton condensation reaction to form crotonal, which is hydrogenated to butanol on the metal sites. Butanol, in turn, is dehydrated into butenes, which undergo hydrogenation to butane. The presence of hydrogen in the gas phase leads to the displacement of ethanol from the metal surface and prevents the formation of surface carbonates and acetates. It has been found that hydrogen significantly accelerates ethanol dehydration owing to a decrease in the activation energy, which can be attributed to hydrogen spillover to the zeolite. The addition of water inhibits all acid-catalyzed reactions owing to competitive adsorption on acid sites and thereby decreases the butanol yield and the ethanol conversion.
- Kots,Zabilska,Grigor’ev, Yu. V.,Ivanova
-
p. 925 - 934
(2019/08/20)
-
- Length-Selective Synthesis of Acylglycerol-Phosphates through Energy-Dissipative Cycling
-
The main aim of origins of life research is to find a plausible sequence of transitions from prebiotic chemistry to nascent biology. In this context, understanding how and when phospholipid membranes appeared on early Earth is critical to elucidating the prebiotic pathways that led to the emergence of primitive cells. Here we show that exposing glycerol-2-phosphate to acylating agents leads to the formation of a library of acylglycerol-phosphates. Medium-chain acylglycerol-phosphates were found to self-assemble into vesicles stable across a wide range of conditions and capable of retaining mono- and oligonucleotides. Starting with a mixture of activated carboxylic acids of different lengths, iterative cycling of acylation and hydrolysis steps allowed for the selection of longer-chain acylglycerol-phosphates. Our results suggest that a selection pathway based on energy-dissipative cycling could have driven the selective synthesis of phospholipids on early Earth.
- Bonfio, Claudia,Caumes, Cécile,Duffy, Colm D.,Patel, Bhavesh H.,Percivalle, Claudia,Tsanakopoulou, Maria,Sutherland, John D.
-
supporting information
p. 3934 - 3939
(2019/03/08)
-
- Cu2 O/monodentate ligand/TEMPO by catalyzing air production of aldehydes
-
The invention discloses a Cu2 O/monodentate ligand/TEMPO by catalyzing air production of aldehydes, characterized in that incendiary as raw materials, air as the oxidizing agent, to the organic solution as the solvent, in the Cu2 S/monodentate ligand/TEMPO under the catalytic action, modifiable is oxidized to obtain corresponding aldehydes; the catalyst of the invention not only has excellent catalytic activity of the catalytic system at the same time recycled; and simplify the catalytic system, the operation is simple, the substrate serviceability is good, high yield, low cost.
- -
-
Paragraph 0027; 0028; 0050
(2019/01/08)
-
- Stable Carbocation Generated via 2,5-Cyclohexadien-1-one Protonation
-
Protonation of a substituted cyclohexadien-1-one (1) leads to the generation of carbocation [3]+, capable of effecting hydride abstraction and oxidation reactions. The molecular structure of [3]+ shows it to be structurally similar to [(p-MeO-C6H4)Ph2C]+. The ability to easily access [3]+ from stable and available precursors, such as 1 and commercially available acids, may allow a wider application of the growing number of trityl-based reactions in organic syntheses.
- Fraser, Craig,Young, Rowan D.
-
p. 505 - 509
(2018/02/19)
-
- Kinetics and Mechanism of Electron Transfer Reactions: Oxidation of Crotyl Alcohol by Peroxomonosulfate in Aqueous Acidic Medium
-
The kinetics and mechanism of oxidation of crotyl alcohol by peroxomonosulfate has been studied, and the species of the peroxomonosulfate are discussed to find out the role of activated species. A plausible reaction mechanism is suggested, and a derived rate law corresponds to all experimental observations. The activation parameters such as energy and entropy of activation have been calculated as 37.21 ± 0.5 kJ mol?1 and ?148.91 ± 2.7 J K?1 mol?1, respectively, by employing the Eyring plot.
- Sharma, Priyamvada,Sailani, Riya,Meena, Anita,Khandelwal
-
p. 335 - 342
(2018/03/21)
-
- Aerobic Oxidation of Alcohols Catalysed by Cu(I)/NMI/TEMPO System and Its Mechanistic Insights
-
Abstract: Homogeneous Cu(I)/NMI/TEMPO catalyst system (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) has been investigated for its catalysis on the aerobic oxidation of 1-octanol and other alcohols into aldehydes under room temperature. The catalytic species was found to be a Cu(I) centre coordinated by two NMI molecules and other two weakly bound solvent molecules, [Cu(NMI)2(Sol)2]+ (Sol = solvent). When CuI was used, this species could be [Cu(NMI)I(Sol)2]. Not like being speculated previously, NMI in this system acts solely as a ligand and its role coordinated to the copper centre enhanced the electron density on the metal centre which promoted the O2 binding in the catalysis. The labile solvent binding to the Cu(I) centre is essential to ensure both oxygen and substrate binding. The catalyst system is suitable for the oxidation of various alcohols using a simple reaction setup and workup. In particular, the system possesses strong oxidizing capability in quantitative conversion of benzylic alcohols regardless of the substituents on the phenyl ring and allylic alcohols into aldehydes. A plausible mechanism was also proposed for the catalysis. Graphical Abstract: The aerobic oxidation of primary alcohols at room temperature to corresponding aldehydes was achieved by the catalyst composed by Cu(I) and methyl imidazole (NMI) mediated by TEMPO in acetonitrile. The catalytic species is proposed to be such a Cu(I) complex that two of its four coordinating sites are occupied by a strong ligand(s) and the rest two are weakly bound by solvent molecules.[Figure not available: see fulltext.].
- Liu, Zhenzhen,Shen, Zhongquan,Zhang, Ning,Zhong, Wei,Liu, Xiaoming
-
p. 2709 - 2718
(2018/07/21)
-
- CONVERSION OF ALCOHOLS TO LINEAR AND BRANCHED FUNCTIONALIZED ALKANES
-
Embodiments herein concerns the eco-friendly conversion of simple alcohols to linear or branched functionalized alkanes, by integrated catalysis. The alcohols are firstlyoxidized either chemically or enzymatically to the corresponding aldehydes or ketones, followed by aldol condensations using a catalyst to give the corresponding enals or enones. The enals or enones are subsequently and selectively hydrogenated using a recyclable heterogeneous metal catalyst, organocatalyst or an enzyme to provide linear or branched functionalized alkanes with an aldehyde, keto- or alcohol functionality. The process is also iterative and can be further extended by repeating the above integrated catalysis for producing long-chain functionalized alkanes from simple alcohols.
- -
-
Page/Page column 9
(2018/03/09)
-
- Catalytic Reactions of Homo- and Cross-Condensation of Ethanal and Propanal
-
Abstract: Processes of catalytic homocondensation of propanal and its cross-condensation with ethanal and methanal in the presence of aniline and amino acids have been studied. The dependence of the conversion of the reactants and selectivity of the homo/heterocondensation process on the catalyst nature and temperature has been revealed. It has been shown that the maximum acrolein selectivity is reached in the case of using benzoyl-substituted derivatives in water, with the proportion of the products of further condensation decreasing. The selectivity for the ethanal homocondensation product 2-butenal decreases simultaneously as a result of the formation of linear and branched oligomers of successive condensation.
- Martsinkevich,Bruk,Dashko,Afaunov,Flid,Sedov
-
p. 1032 - 1035
(2019/01/03)
-
- A versatile biobased continuous flow strategy for the production of 3-butene-1,2-diol and vinyl ethylene carbonate from erythritol
-
A versatile, tunable and robust continuous flow procedure for the deoxydehydration (DODH) of biobased erythritol toward 3-butene-1,2-diol is described. The procedure relies on specific assets of multistep continuous flow processing. Detailed mechanistic and computational studies on erythritol show that either 3-butene-1,2-diol or butadiene are obtained in high selectivity and yield on demand, as a function of the DODH reagent/substrate ratio and of the process parameters. Short reaction times (1-15 min) at high temperature (225-275 °C) and moderate pressure are reported. 3-Butene-1,2-diol is then further converted downstream into its corresponding carbonate, i.e. 4-vinyl-1,3-dioxolan-2-one (vinyl ethylene carbonate), an important industrial building block. The carbonation step uses a supported organocatalyst, and could be directly concatenated to the first DODH step. This unprecedented procedure also relies on a unique combination of on- and off-line analytical protocols for reaction monitoring and product quantification, and offers a biobased strategy toward important industrial building blocks otherwise petrosourced.
- Tshibalonza, Nelly Ntumba,Gérardy, Romaric,Alsafra, Zouheir,Eppe, Gauthier,Monbaliu, Jean-Christophe M.
-
p. 5147 - 5157
(2018/11/26)
-
- Dinuclear Pathways for the Activation of Strained Three-Membered Rings
-
Dinuclear, strain-induced ring-opening reactions of vinylaziridines and vinylcyclopropanes are described. The previously reported [NDI]Ni2(C6H6) complex (NDI = naphthyridine-diimine) reacts with N-tosyl-2-vinylaziridine via C-N oxidative addition to generate a dinickel metallacyclic product. On the basis of this stoichiometric reactivity, the [NDI]Ni2(C6H6) complex is shown to be a highly active catalyst for the rearrangement of vinylcyclopropane to cyclopentene. Notably, 2-phenyl-1-vinylcyclopropane undergoes regioselective activation at the less hindered C-C bond in contrast to the noncatalytic thermal rearrangement. DFT calculations provide insight into the ability of the Ni-Ni bond to stabilize key intermediates and transition states along the catalytic pathway.
- Rounds, Heather R.,Zeller, Matthias,Uyeda, Christopher
-
p. 545 - 550
(2018/03/08)
-
- Environment-friendly method for synthesizing propenyl ketone compound
-
The invention discloses an environment-friendly method for synthesizing a propenyl ketone compound. The method comprises the following steps: subjecting an aldehyde compound and allyl bromide to a Barbier reaction in the presence of metal powder, so as to obtain an allyl alcohol compound; and subjecting the allyl alcohol compound to a structural isomerization reaction in the presence of a catalyst, thereby obtaining the propenyl ketone compound. The method disclosed by the invention has the advantages of short synthesis route, mild reaction conditions, simplicity in operation, readily available raw materials, and the like and has relatively high academic research value and market economy significance.
- -
-
Paragraph 0019; 0020
(2019/01/04)
-
- Aldol condensation among acetaldehyde and ethanol reactants on TiO2: Experimental evidence for the kinetically relevant nucleophilic attack of enolates
-
Combinations of rate measurements as functions of reactant pressures, in situ infrared spectroscopy, comparisons of kinetic isotope effects, and rate inhibition effects provide experimental evidence that aldol condensation of acetaldehyde proceeds by kinetically relevant nucleophilic attack of a reactive enolate upon an acetaldehyde molecule over anatase TiO2. Steady-state turnover rates of aldol condensation measured as a function of the pressures of C2H4O, C2H5OH, H2O, and H2 between 503 K and 537 K show that rates reflect a second order dependence on C2H4O pressure and an inverse second order dependence on the C2H5OH pressure at the lowest C2H4O-to-C2H5OH ratios. Infrared spectra obtained in situ show that the exposed cationic Ti-atoms that facilitate aldol addition on TiO2 surfaces are saturated with C2H5OH? species and C2H4O? coverages are much smaller. In addition, aldol rates increase when C2D4O replaces C2H4O as a reactant, which likely reflects an inverse, secondary isotope effect caused by rehybridization of C-atoms at the transition state that forms a C–C bond between two reactive intermediates derived from acetaldehyde. These results suggest that the kinetically relevant step is a bimolecular surface reaction, specifically the nucleophilic attack of an enolate onto a vicinal C2H4O? species. This conclusion is consistent also with aldol condensation rates that decrease with an inverse second order dependence on pyridine (C5H5N) pressure, because C5H5N displaces C2H4O from the two Lewis acid sites involved in the kinetically relevant step (confirmed by in situ FTIR). Comparisons to recent reports on the mechanism of this reaction on anatase TiO2 indicate that the presence of high coverages of C2H5OH? causes nucleophilic attack to become the kinetically relevant step by significantly reducing the number of enolate-acetaldehyde reactant pairs upon the surface.
- Zhang, Hongbo,Ibrahim, Malek Y.S.,Flaherty, David W.
-
p. 290 - 302
(2018/04/02)
-
- Engineering a Promiscuous Tautomerase into a More Efficient Aldolase for Self-Condensations of Linear Aliphatic Aldehydes
-
The enzyme 4-oxalocrotonate tautomerase (4-OT) from Pseudomonas putida mt-2 takes part in a catabolic pathway for aromatic hydrocarbons, where it catalyzes the conversion of 2hydroxyhexa-2,4-dienedioate into 2-oxohexa-3-enedioate. This tautomerase can also promiscuously catalyze carbon–carbon bond-forming reactions, including various types of aldol reactions, by using its amino-terminal proline as a key catalytic residue. Here, we used systematic mutagenesis to identify two hotspots in 4-OT (Met45 and Phe50) at which single mutations give marked improvements in aldolase activity for the self-condensation of propanal. Activity screening of a focused library in which these two hotspots were varied led to the discovery of a 4-OT variant (M45Y/F50V) with strongly enhanced aldolase activity in the self-condensation of linear aliphatic aldehydes, such as acetaldehyde, propanal, and butanal, to yield α,β-unsaturated aldehydes. With both propanal and benzaldehyde, this double mutant, unlike the previously constructed single mutant F50A, mainly catalyzes the self-condensation of propanal rather than the cross-condensation of propanal and benzaldehyde, thus indicating that it indeed has altered substrate specificity. This variant could serve as a template to create new biocatalysts that lack dehydration activity and possess further enhanced aldolase activity, thus enabling the efficient enzymatic self-coupling of aliphatic aldehydes.
- Rahimi, Mehran,van der Meer, Jan-Ytzen,Geertsema, Edzard M.,Poelarends, Gerrit J.
-
p. 1435 - 1441
(2017/07/25)
-
- Supported bimetallic AuPd clusters using activated Au25 clusters
-
Bimetallic AuPd nanoparticles on alumina supports were prepared using Au25(SR)18 precursors activated by mild calcination or LiBH4 treatment, followed by selective deposition of Pd via ascorbic acid reduction. Comparison of their catalytic activity for the oxidation of crotyl alcohol showed that bimetallic structure had significantly improved catalysis compared to Pd/Al2O3. In particular, AuPd samples grown from LiBH4-activated Au25 clusters exhibit the highest catalytic activity as well as high selectivity towards crotonaldehyde formation, likely due to their smaller particle sizes as compared to AuPd samples grown from calcined Au25 clusters. X-ray absorption spectroscopy (XAS) at the Au L3-edge, Pd L3-edge and Pd K-edges showed that the resulting bimetallic AuPd nanoparticles had Au-Pd core-shell structures with a 4d-electron poor Pd surface.
- Lee, Kee Eun,Shivhare, Atal,Hu, Yongfeng,Scott, Robert W.J.
-
p. 259 - 265
(2016/12/02)
-
- METHODS FOR PRODUCING BUTANOL
-
Methods and compositions for producing 1-butanol are described herein. In some examples, the methods can comprise, contacting a reactant comprising ethanol with a catalyst system, thereby producing a product comprising 1-butanol. The catalyst system can comprise, for example, an iridium catalyst and a nickel, copper, and/or zinc catalyst. The nickel, copper, and zinc catalysts can comprise nickel, copper, and/or zinc and a sterically bulky ligand.
- -
-
Paragraph 0087-0088
(2017/02/02)
-
- Method for synthesizing muscone by utilizing beta-monomethyl methylglutarate
-
The invention discloses a method for synthesizing muscone by utilizing beta-monomethyl methylglutarate. According to the method, beta-monomethyl methylglutarate and alpha,omega-dodecanedioic acid monomethyl ester respectively prepared through a heteropoly acid catalytic transesterification method are used as raw materials, and Kolbe electrolysis, acyloin condensation and reduction reaction are performed to prepare the muscone. The method of the present invention has advantages of high raw material utilization rate, mold condition, easy control and environmental protection, and is suitable for industrial production .
- -
-
Paragraph 0021; 0022
(2017/12/05)
-
- Selective oxidation of ethanol over vanadia-based catalysts: The influence of support material and reaction mechanism
-
The catalytic performance of vanadia supported on silica, alumina, zirconia, and titania was investigated in the selective oxidation of ethanol. It was shown that the activity and product distribution strongly depend on the support material, which determines the structure of supported vanadia species. On silica and alumina, low-active V2O5 crystallites were mainly formed regardless of the vanadium content. These catalysts demonstrated high selectivity toward only acetaldehyde. In contrast, monomeric surface vanadia species and polymeric surface vanadia species were mainly formed over TiO2 when the vanadium content did not exceed what is necessary for the ideal monolayer. Over zirconia, both the surface vanadia species and the V2O5 crystallites existed regardless of the vanadium content. It was found that the surface vanadia species are more active in the selective oxidation of ethanol than the V2O5 crystallites. The highest activity was observed for the polymeric vanadia species and, correspondingly, the best catalytic performance was achieved on the monolayer V2O5/TiO2 catalyst. At low temperatures between 110 and 150 °C, this catalyst demonstrated high activity in the oxidation of ethanol to acetaldehyde with the selectivity ranging between 80% and 100%. At temperature near 200 °C, the same catalyst was active in the oxidation of ethanol to acetic acid with the selectivity of approximately 65%. The surface intermediates and the catalyst state were also studied in situ by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. It was shown that under reaction conditions near 100 °C, non-dissociatively adsorbed molecules of ethanol, ethoxide species, and adsorbed acetaldehyde exist on the catalyst surface, while at higher temperatures, V2O5/TiO2 is mainly covered with acetate species. Titanium cations remained in the Ti4+ state, whereas V5+ cations underwent a reversible reduction under reaction conditions. On the basis of the in situ data complemented by the results of kinetic measurements, a reaction mechanism for the selective oxidation of ethanol to acetaldehyde and acetic acid over the monolayer catalysts was proposed.
- Andrushkevich,Kaichev,Chesalov, Yu.A.,Saraev,Buktiyarov
-
-
- Manganese-Catalyzed Upgrading of Ethanol into 1-Butanol
-
Biomass-derived ethanol is an important renewable feedstock. Its conversion into high-quality biofuels is a promising route to replace fossil resources. Herein, an efficient manganese-catalyzed Guerbet-type condensation reaction of ethanol to form 1-butanol was explored. This is the first example of upgrading ethanol into higher alcohols using a homogeneous non-noble-metal catalyst. This process proceeded selectively in the presence of a well-defined manganese pincer complex at the parts per million (ppm) level. The developed reaction represents a sustainable synthesis of 1-butanol with excellent turnover number (>110 000) and turnover frequency (>3000 h-1). Moreover, mechanistic studies including control experiments, NMR spectroscopy, and X-ray crystallography identified the essential role of the "N-H moiety" of the manganese catalysts and the major reaction intermediates related to the catalytic cycle.
- Fu, Shaomin,Shao, Zhihui,Wang, Yujie,Liu, Qiang
-
supporting information
p. 11941 - 11948
(2017/09/07)
-
- A new selective route towards benzoic acid and derivatives from biomass-derived coumalic acid
-
The selective production of aromatics from bio-based sources is an area of interest to expand the potential for greener alternatives to petroleum-derived chemicals. A scalable, efficient route to produce bio-based benzoates is demonstrated by carrying out heterogeneous catalytic reactions in non-toxic bio-based solvents at 180°C obtaining yields of up to 100 mol%. This approach extends the 2-pyrone (coumalic acid/methyl coumalate) Diels-Alder platform by utilizing a bioavailable co-reactant ethylene. A detailed investigation using a combination of kinetic experiments, DFT calculations, and multi-dimensional NMR was carried out to determine the detailed reaction network, and the corresponding activation energies for critical steps. Additionally, a series of experiments were conducted to maximize the yields by comparing different solvents, for both coumalic acid and methyl coumalate. Our results show that the choice of solvent was a significant factor when coumalic acid was the reactant (yields 71-92 mol%), while methyl coumalate was only minimally affected by the solvent (yields 95-100 mol%). Interestingly, the reaction network and kinetic analysis showed that the Diels-Alder reactions were not significantly different between coumalic acid and methyl coumalate, with the rate limiting step for both being decarboxylation with an activation barrier of 141 kJ mol-1 compared to 77 kJ mol-1 for the formation of the bicyclic adduct. Finally, the reaction cascade was found to be highly susceptible to by-product formation when as little as 5 vol% water was present in the solvent, which demonstrates that the absence of water is essential for high yielding benzoate production.
- Pfennig, Toni,Carraher, Jack M.,Chemburkar, Ashwin,Johnson, Robert L.,Anderson, Austin T.,Tessonnier, Jean-Philippe,Neurock, Matthew,Shanks, Brent H.
-
supporting information
p. 4879 - 4888
(2017/10/23)
-
- SELECTIVE REMOVAL OF IMPURITIES IN ACETIC ACID PRODUCTION PROCESSES
-
Processes for producing carboxylic acid are included herein. The processes include contacting methanol and carbon monoxide in the presence of a liquid reaction medium under carbonylation conditions sufficient to form a carbonylation product including acetic acid and one or more components selected from acetaldehyde, formic acid and combinations thereof, wherein the liquid reaction medium includes: a carbonylation catalyst selected from rhodium catalysts, iridium catalysts and palladium catalysts; and water in a water concentration in a range of 1 wt.% to 14 wt.% based on the total w eight of the liquid reaction medium; and contacting at least a portion of the carbonylation product or a derivative thereof with an adsorbent at adsorption conditions sufficient to selectively reduce a concentration of one or more components present in the carbonylation product, wherein the adsorbent includes a silicoaluminophosphate (SAPO).
- -
-
Paragraph 0087
(2017/07/18)
-
- SINGLE-STEP CONVERSION OF N-BUTYRALDEHYDE TO 2-ETHYLHEXANAL
-
Disclosed is a method of making and using a titania supported palladium catalyst for the single step synthesis of 2-ethylhexanal from a feed of n-butyraldehyde. This titania supported palladium catalyst demonstrates high n-butyraldehyde conversion but also produces 2-ethylhexanal in an appreciable yield with maintained activity between runs. This method provides a single step synthesis of 2-ethylhexanal from n-butyraldehyde with a catalyst that can be regenerated that provides cleaner downstream separations relative to the traditional caustic route.
- -
-
Paragraph 00130; 00151-00153
(2017/08/21)
-
- Formation Pathways toward 2- and 4-Methylbenzaldehyde via Sequential Reactions from Acetaldehyde over Hydroxyapatite Catalyst
-
Condensation reactions of biomass derived C2 and C4 aldehydes form both ortho- and para-tolualdehydes (2-MB and 4-MB, respectively). The complete reaction network and the detailed mechanisms, however, have not been fully described. H
- Moteki, Takahiko,Rowley, Andrew T.,Bregante, Daniel T.,Flaherty, David W.
-
p. 1921 - 1929
(2017/06/13)
-
- Role of the surface intermediates in the stability of basic mixed oxides as catalyst for ethanol condensation
-
The ethanol condensation catalyzed by mixed oxides is studied in this work, considering not only the activity but also the stability of these materials. Concerning to the activity, different weight hourly space velocities (WHSV) were tested, obtaining the highest conversion and 1-butanol selectivity with Mg-Al, mainly at 673?K and a WSHV of 7.9?h?1. On the other hand, dehydration products, observed with Mg-Zr in relevant amounts, limit the results obtained with this material. Deactivation studies were carried out by combining the measurement of reactant and products in the gas phase and in the catalytic surface using spectroscopic techniques (DRIFT). Good stability was observed with both materials at low temperatures (lower than 673?K), whereas at the highest one, Mg-Zr suffers relevant deactivation justified by the permanent adsorption of aldehydes and oxygenated oligomers on the active sites. It has been demonstrated that Mg-Al mixed oxides are promising catalyst for 1-butanol production from ethanol not only in terms of activity, but also in terms of catalyst stability.
- Quesada, Jorge,Faba, Laura,Díaz, Eva,Ordó?ez, Salvador
-
p. 271 - 281
(2017/06/14)
-
- Synthesis of C4 and C8 Chemicals from Ethanol on MgO-Incorporated Faujasite Catalysts with Balanced Confinement Effects and Basicity
-
A new type of catalyst has been designed to adjust the basicity and level of molecular confinement of KNaX faujasites by controlled incorporation of Mg through ion exchange and precipitation of extraframework MgO clusters at varying loadings. The catalytic performance of these catalysts was compared in the conversion of C2 and C4 aldehydes to value-added products. The product distribution depends on both the level of acetaldehyde conversion and the fraction of magnesium as extraframework species. These species form rather uniform and highly dispersed nanostructures that resemble nanopetals. Specifically, the sample containing Mg only in the form of exchangeable Mg2+ ions has much lower activity than those in which a significant fraction of Mg exists as extraframework MgO. Both the (C6+C8)/C4 and C8/C6 ratios increase with additional extraframework Mg at high acetaldehyde conversion levels. These differences in product distribution can be attributed to 1) higher basicity density on the samples with extraframework species, and 2) enhanced confinement inside the zeolite cages in the presence of these species. Additionally, the formation of linear or aromatic C8 aldehyde compounds depends on the position on the crotonaldehyde molecule from which abstraction of a proton occurs. In addition, catalysts with different confinement effects result in different C8 products.
- Zhang, Lu,Pham, Tu N.,Faria, Jimmy,Santhanaraj, Daniel,Sooknoi, Tawan,Tan, Qiaohua,Zhao, Zheng,Resasco, Daniel E.
-
p. 736 - 748
(2016/05/09)
-
- Method to oxidize alcohols selectively to aldehydes and ketones with heterogeneous supported ruthenium catalyst at room temperature in air and catalyst thereof
-
The present invention relates to a method for selectively oxidizing alcohol by using a heterogeneous catalyst for producing aldehyde and ketone in an organic synthesis process used in the laboratory and chemical industries, and a catalytic system thereof. The method can be used as an intermediate product for synthesizing medicine, scent, fragrance, and precise chemical products, and can use a heterogeneous catalyst at room temperature in air by using the catalytic system and producing alcohol and ketone.COPYRIGHT KIPO 2016
- -
-
Paragraph 0021; 0022
(2016/10/07)
-
- Characterization of the monolignol oxidoreductase AtBBE-like protein 15 L182V for biocatalytic applications
-
Monolignol oxidoreductases from the berberine bridge enzyme-like (BBE-like) protein family (pfam 08031) catalyze the oxidation of monolignols to the corresponding aldehydes. In this report, we explore the potential of a monolignol oxidoreductase from Arabidopsis thaliana (AtBBE-like protein 15) as biocatalyst for oxidative reactions. For this study we employed a variant with enhanced reactivity towards oxygen, which was obtained by a single amino acid exchange (L182V). The pH and temperature optima of the purified AtBBE-like protein 15 L182V were determined as well as the tolerance toward organic co-solvents; furthermore the substrate scope was characterized. The enzyme has a temperature optimum of 50 °C and retains more than 50% activity between pH 5 and pH 10 within 5 min. The enzyme shows increased activity in the presence of various co-solvents (10–50% v/v), including acetonitrile, 2-propanol, 1,4-dioxane, and dimethyl sulfoxide. Primary benzylic and primary or secondary allylic alcohols were accepted as substrates. The enantioselectivity E in the oxidation of secondary alcohols was good to excellent (E>34 to?>200).
- Pils, Sabine,Schnabl, Kordula,Wallner, Silvia,Daniel, Bastian,Macheroux, Peter,Kljajic, Marko,Kupresanin, Nina,Breinbauer, Rolf,Fuchs, Michael,Rocha, Raquel,Schrittwieser, Joerg H.,Kroutil, Wolfgang
-
-
- Aldol Condensation of Acetaldehyde over Titania, Hydroxyapatite, and Magnesia
-
The kinetics of aldol condensation of acetaldehyde were studied over anatase titania (TiO2), hydroxyapatite (HAP), and magnesia (MgO). Reactions were carried out in a fixed-bed reactor with a total system pressure of 220 kPa at temperatures between 533 and 633 K and acetaldehyde partial pressures between 0.05 and 50 kPa. Crotonaldehyde was the only product observed over all three catalysts, and severe catalyst deactivation occurred at acetaldehyde partial pressures of 5 kPa or greater. The aldol condensation reaction over all three catalysts was first order at low acetaldehyde partial pressure and approached zero order at high acetaldehyde partial pressure. No kinetic isotope effect (KIE) was observed with fully deuterated acetaldehyde reacting over TiO2 or HAP, implying that C-H bond activation is not kinetically relevant. These measurements are consistent with a mechanism in which adsorption and desorption steps are kinetically significant during the reaction. Characterization of the catalysts by adsorption microcalorimetry of acetaldehyde and ethanol and diffuse reflectance Fourier transform infrared spectroscopy of adsorbed acetaldehyde, crotonaldehyde, and acetic acid revealed a very high reactivity of these catalysts, even at low temperatures.
- Young, Zachary D.,Hanspal, Sabra,Davis, Robert J.
-
p. 3193 - 3202
(2016/07/06)
-
- MICROORGANISMS FOR PRODUCING 4C-5C COMPOUNDS WITH UNSATURATION AND METHODS RELATED THERETO
-
The invention provides a non-naturally occurring microbial organism having a butadiene, crotyl alcohol, 2,4-pentadienoate, 3-buten-2-ol, or 3-buten-1-ol, pathway. The microbial organism contains at least one exogenous nucleic acid encoding an enzyme in a pathway. The invention additionally provides a method for producing butadiene, crotyl alcohol, 2,4-pentadienoate, 3-buten-2-ol, or 3-buten-1-ol,. The method can include culturing a butadiene, crotyl alcohol, 2,4-pentadienoate, 3-buten-2-ol, or 3-buten-1-ol-producing microbial organism, where the microbial organism expresses at least one exogenous nucleic acid encoding a pathway enzyme in a sufficient amount, and under conditions and for a sufficient period of time to produce butadiene, crotyl alcohol, 2,4-pentadienoate, 3-buten-2-ol, or 3-buten-1-ol.
- -
-
Paragraph 0014; 00100
(2016/01/25)
-
- An improved production process of butenal
-
The invention relates to an improvement of a crotonaldehyde production technique, which comprises the following steps: steam condensate is added into a condensation tower, an acetaldehyde condensation tower, a 3-hydroxybutyraldehyde dehydration tower and a primary distillation tower are in a water distillation state, tetramethyl ammonium hydroxide is used as a catalyst, the catalyst:acetaldehyde:acetic acid mole ratio is 1:1000:5, the catalyst solution, acetaldehyde and acetic acid are respectively added into the 10th, 11th and 6th tower trays of a bubbling hood condensation tower to generate 3-hydroxybutyraldehyde at the condensation temperature of 42-49 DEG C under the pressure of 0.05 MPa, the tower top condensate completely flows back, the tower bottom 3-hydroxybutyraldehyde enters the dehydration tower and is dehydrated under acidic conditions to generate crude crotonaldehyde, 0.34 part of the tower top distillation product condensate flows back, the rest tower top distillation product condensate and uncondensed gas enter the primary distillation tower to be concentrated, the tower top acetaldehyde gas condensate returns to the condensation tower for cyclic utilization, the crotonaldehyde is recovered from the middle part of the condensation tower, and the supernatant 89% crude crotonaldehyde is refined into 99.3% crotonaldehyde; and the wastewater is introduced into an incinerator to be incinerated, thereby implementing the zero discharge of wastewater and the production green technique.
- -
-
Paragraph 0011-0013
(2018/02/04)
-
- Effect of the niobium state on the properties of NbSiBEA as bifunctional catalysts for gas- and liquid-phase tandem processes
-
NbSiBEA zeolites contained isolated framework mononuclear Nb(V) (Nb0.7SiBEA) and a mixture of framework mononuclear and extra-framework polynuclear Nb(V) (Nb2.0SiBEA) were prepared by two-step postsynthesis method as evidenced by XRD, NMR, DR UV–vis and FTIR. DR UV–vis showed that two types of framework mononuclear Nb(V) are present in Nb0.7SiBEA, while Nb2.0SiBEA mainly contained isolated mononuclear Nb(V) in the framework of zeolite and polynuclear Nb(V) in the extra-framework position. FTIR with pyridine and 2,6-di-tert-butylpyridine as probe molecules showed that major amount Lewis and weak Br?nsted acidic sites are formed by incorporation of niobium in the framework of zeolites as mononuclear Nb(V). The catalytic properties of Nb-containing zeolites were investigated in tandem processes of ethanol conversion into 1,3-butadiene (gas-phase) and synthesis of unsymmetrical ethers from aromatic aldehyde and aliphatic alcohol (liquid-phase). It has been found that Nb0.7SiBEA catalyst, containing only isolated framework mononuclear Nb(V) is more active than Nb2.0SiBEA in the conversion of ethanol and ethanol/acetaldehyde mixture into 1,3-butadiene, MPV reduction of crotonaldehyde with ethanol and etherification of 4-methoxybenzyl alcohol with 2-butanol. The higher specific activity (turnover number/frequency) of Nb0.7SiBEA than Nb2.0SiBEA catalyst has been revealed for gas- and liquid-phase tandem processes.
- Kyriienko, Pavlo I.,Larina, Olga V.,Popovych, Nataliia O.,Soloviev, Sergiy O.,Millot, Yannick,Dzwigaj, Stanislaw
-
-