- Application of Bulky NHC-Rhodium Complexes in Efficient S-Si and S-S Bond Forming Reactions
-
The efficient and straightforward syntheses of silylthioethers and disulfides are presented. The synthetic methodologies are based on new rhodium complexes containing bulky N-heterocyclic carbene (NHC) ligands that turned out to be efficient catalysts in thiol and thiol-silane coupling reactions. These green protocols, which use easily accessible reagents, allow obtaining compounds containing S-Si and S-S bonds in solvent-free conditions. Additionally, preliminary tests on coupling of mono- and octahydro-substituted spherosilicates with selected thiols have proved to be very promising and showed that these catalytic systems can be used for the synthesis of a novel class of functionalized silsesquioxane derivatives.
- Bo?t, Ma?gorzata,?ak, Patrycja
-
supporting information
p. 17579 - 17585
(2021/11/18)
-
- Photochemical metal-free aerobic oxidation of thiols to disulfides
-
Thiol oxidation to disulfides is an area of great importance in organic synthesis, both for synthetic and biological purposes. Herein, we report a mild, inexpensive and green photochemical approach for the synthesis of both symmetrical and non-symmetrical disulfides, using metal-free and environmentally friendly conditions. Utilizing phenylglyoxylic acid as the photoinitiator, common household bulbs as the light source and a simple inorganic salt as the additive, a versatile oxidation of thiols leading to products in excellent yields is described. This journal is
- Spiliopoulou, Nikoleta,Kokotos, Christoforos G.
-
supporting information
p. 546 - 551
(2021/01/28)
-
- Extended Pummerer fragmentation mediated by carbon dioxide and cyanide
-
Pummerer rearrangement reactions generate sulfur (II) oxidation state from sulfur (IV) starting materials in the presence of activating reagents. We found unprecedented transformation of vinyl sulfoxide; disulfide formation reactions mediated by atmospheric pressure of carbon dioxide in extended Pummerer rearrangement reactions. Only under CO2 atmosphere, we observed moderate to high yields of disulfide starting from sulfur (IV) starting materials. Investigations on the reaction mechanism revealed that the degradation of the starting materials and the products was significant in the absence of CO2. Further evidence for the suggested reaction mechanism was obtained by a cross-over experiment and a radical trapping reagent.
- Liu, Jian,Kragh, Rasmus R.,Kamounah, Fadhil S.,Lee, Ji-Woong
-
supporting information
(2020/10/30)
-
- Visible-light photocatalytic selective aerobic oxidation of thiols to disulfides on anatase TiO2
-
This work presents the visible-light photocatalytic selective oxidation of thiols to disulfides with molecular oxygen (O2) on anatase TiO2. The high specific surface area of anatase TiO2 proved to be especially critical in
- Xu, Hui,Shi, Ji-Long,Lyu, Shaoshuai,Lang, Xianjun
-
p. 1468 - 1473
(2020/04/29)
-
- TEMPO visible light photocatalysis: The selective aerobic oxidation of thiols to disulfides
-
TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) is well-established in orangocatalysis that usually work in synergy with transition-metal catalysis or semiconductor photocatalysis. Here, TEMPO was turned into a visible light photocatalyst to conduct the selective aerobic oxidation of thiols into disulfides. With O2 as an oxidant, a mild and efficient protocol for the selective oxidation of thiols into disulfides including symmetrical and unsymmetrical ones with 5 molpercent of TEPMO as a photocatalyst was developed at room temperature under the irradiation of 460 nm blue LEDs. It was found that a complex formed between TEMPO and thiols underpinned the visible light activity and disulfides were obtained in very high isolated yields. This work suggests that TEMPO takes diverse roles in for photocatalytic selective oxidative transformations with O2 as the oxidant.
- Xu, Hui,Zhang, Yu-Fei,Lang, Xianjun
-
supporting information
p. 1520 - 1524
(2019/12/09)
-
- Synthesis and nano-Pd catalyzed chemoselective oxidation of symmetrical and unsymmetrical sulfides
-
A highly chemoselective, efficient and nano-Pd catalyzed protocol for the rapid construction of sulfoxides and sulfones via the oxidation of symmetrical and unsymmetrical sulfides using H2O2 as an oxidant has been developed, respectively. The ready availability of starting materials, easy recovery and reutilization of the catalyst, wide substrate scope, and high yields make this protocol an attractive alternative. The process also involves the metal-free and microwave-promoted synthesis of symmetrical diarylsulfides, and FeCl3-mediated preparation of symmetrical diaryldisulfides through the reaction of arenediazonium tetrafluoroborates with Na2S·9H2O as a sulfur source. In addition, unsymmetrical sulfides were generated via the K2CO3-mediated reaction of arenediazonium tetrafluoroborates with symmetrical disulfides.
- Li, Xing,Du, Jia,Zhang, Yongli,Chang, Honghong,Gao, Wenchao,Wei, Wenlong
-
p. 3048 - 3055
(2019/03/21)
-
- Unsymmetrical Disulfides Synthesis via Sulfenium Ion
-
An umpolung approach for the synthesis of unsymmetrical disulfides via sulfenium ion is reported. In situ generated electrophilic sulfenium ion from electron-rich thiols reacted with second thiols to yield unsymmetrical disulfides. Using an iodine catalyst and 4-dimethylaminopyridine (DMAP)/water as promoter, the target syntheses were achieved in one pot under aerobic condition.
- Parida, Amarchand,Choudhuri, Khokan,Mal, Prasenjit
-
supporting information
p. 2579 - 2583
(2019/07/15)
-
- A novel dual-nano assisted synthesis of symmetrical disulfides from aryl/alkyl halides
-
Here, we have reported a novel approach towards dual-nano assisted synthesis of disulfides from coupling of alkyl/aryl halides and sulfur nanoparticles. The indium oxide nanoparticles as catalyst expedite the conversion and sulfur nanoparticle notably enhances the miscibility, providing a faster, high yielding and cost-effective process in ethanol-water system. The method has synthetic advantages in terms of mild reaction framework, catalyst regeneration, and absence of any sulfide or polysulfide linkage as by-product leading to a column free synthesis. A variety of alkyl, aryl and heteroaryl symmetrical disulfides are obtained in good to excellent yields up to exceeding 98%.
- Devi, Namita,Hazarika, Sukanya,Gogoi, Prasanta,Barman, Pranjit
-
supporting information
p. 1927 - 1938
(2018/07/21)
-
- Synthesis of 3-Sulfenylindoles from Indoles and Various Sulfenylation Agents through Aerobic Oxidative C-S Bond Coupling
-
A novel aerobic catalytic oxidation system for the sulfenylation of indoles with a variety of sulfenylation agents through oxidative C-S bond coupling has been successfully developed. The reactions were performed with potassium iodide as the catalyst, sodium nitrite as the co-catalyst, and molecular oxygen as the terminal oxidant in the presence of acetic acid. Under the optimal reaction conditions, a number of indoles could be sulfenylated with Bunte salts, thiols, or disulfides to generate 3-sulfenylindoles in good yields. This protocol provided an efficient and environmentally benign strategy for the synthesis of 3-sulfenylindoles.
- Xu, Chaorong,Yi, Shanli,Li, Meichao,Hu, Xinquan,Sun, Nan,Jin, Liqun,Hu, Baoxiang,Shen, Zhenlu
-
p. 1914 - 1920
(2018/08/28)
-
- FLUOROALKYLATING AGENT
-
Problem to be Solved It is intended to provide an industrially preferable fluoroalkylating agent and use thereof. Solution The present invention provides a fluoroalkylating agent represented by the general formula (1) wherein R1 is a C1 to C8 fluoroalkyl group; R2 and R3 are each independently a C1 to C12 alkyl group or the like; Y1 to Y4 are each independently a hydrogen atom, a halogen atom, or the like; and X? is a monovalent anion. A compound of the general formula (3): R4—S—R1 having an introduced C1 to C8 fluoroalkyl group is easily obtained by reacting a compound of the general formula (2): R4—S—Z wherein R4 is a hydrocarbon group or the like; and Z is a leaving group, with the compound of the general formula (1).
- -
-
Paragraph 1430-1431
(2018/01/11)
-
- Ligand-free copper-catalysed direct synthesis of diaryl sulfides and diaryl disulfides in wet poly(ethylene glycol)
-
An improved protocol has been developed for the one-pot CuI-catalysed preparation of symmetric diaryl sulfides from their available aryl halides in the presence of thiourea as sulfur transfer agent and in the absence of both ligand and organic solvent. This catalytic system was also used for the high-yielding preparation of diaryl disulfides in the presence of C2Cl6 as oxidant.
- Nowrouzi, Najmeh,Abbasi, Mohammad,Latifi, Hadis
-
-
- Solvent free, palladium catalyzed highly facile synthesis of diaryl disulfides from aryl thiols
-
An efficient solvent free Pd(pCH2S)2dba catalyzed green-chemical strategy for the synthesis of diaryl disulfides from aryl thiols in moderate to excellent yield is reported. Variety of diaryl disulfides were synthesized. The catalyst
- Dutta, Pratip Kumar,Majumder, Arpi,Dutta, Sanjay,Dhar, Basab Bijayi,Munshi, Parthapratim,Sen, Subhabrata
-
supporting information
p. 527 - 530
(2017/01/16)
-
- Regiocontrolled direct C4 and C2-methyl thiolation of indoles under rhodium-catalyzed mild conditions
-
A straightforward Rh(iii)-catalyzed general strategy was developed for the site-selective remote C4 (sp2) and C2 (sp3)-methyl thiolation of an indole core, keeping the oxime directing group at the C3 position. The transformation was accomplished under mild conditions with a wide scope and functional group tolerance. The directing group can easily be removed after operation. Methyl substitution at the C2 position of the indole core led to C2 (sp3)-methyl thiolation.
- Maity, Saurabh,Karmakar, Ujjwal,Samanta, Rajarshi
-
supporting information
p. 12197 - 12200
(2017/11/16)
-
- An efficient domino Cu-mediated access to organic disulfides from aryl/alkyl halides: Sodium thiosulfate used as a sulfurating reagent
-
Background: We have developed a one-pot, simple and efficient protocol for the direct synthesis of symmetrical organic disulfides in high yields via domino reaction between aryl/alkyl halides and Sodium thiosulfate as the sulfur source, in the presence of copper/imidazole and K2CO3. Methods: Owing to the importance seen in the synthesis disulfides, as is evident from the number of publications in the recent past, and our continuing interest in the synthesis of organosulfur compounds using direct synthesis and domino reaction. Herein we designed the synthesis of various disulfide using reaction of aryl/alkyl halides with sodium thiosulfate in presence CuI catalyst, K2CO3 and imidazol as ligand in solvent DMSO. The reaction of iodobenzene with sodium thiosulfate was studied under normal atmospheric conditions in order to optimize the reaction conditions in terms of temperature, amount of reagent and catalyst, and the type of ligand. Results: Effect of solvent and ligand was perceptible, The reaction proceeded not well in the absence of a ligand. The best ligand for these reaction was imidazole. The various solvents tested in this investigation. It was observed that excellent yield of the product was obtained when the reaction was carried out by using DMSO as solvent. The reaction no proceeded in the absence of a base. K2CO3 was a good choice. We examined various amount of the copper salt. It was found to be the best choice in presence 0.7 mmol from copper salt. Also it was significantly found that the reaction yield and rate increased with temperature. The reaction favoured at 130°C temperature. The 3 mmol Na2S2O3·5H2O concentration was sufficient to give maximum yield of the required product in comparison with other amounts. Diaryl/alkyl disulfides were synthesized in terms of the connecting and type position of the substituents on the aryl/alkyl groups, so that products with different substituents, both electron withdrawing and electron-donating substituent, were synthesized in the ortho, meta and para positions. The results show that iodobenzene and bromobenzene were effective for the reaction. Although it was seen that the reaction cannot progress with compound of aryl chloride. Symmetrical diheteroaryl disulfides were well synthesized from the corresponding heteroaryl iodides, bromides and chlorides. Conclusion: In summary, we have developed a new and effective method for the direct synthesis of diaryl/alkyl disulfides from various aryl/alkyl halides by domino reaction. In this work reports an effective and cheap metal catalyzed sulfur transfer reaction, which is more economic, and more environmentally friendly and more comprehensive than previous methods. As a novel sulfur source, Na2S2O3 shows notable advantage in this system. This reaction functions under mild conditions, and various functional groups are well tolerated.
- Soleiman-Beigi, Mohammad,Basereh, Ali,Mohammadi, Fariba
-
p. 706 - 710
(2017/02/05)
-
- Preparation of difluoromethylthioethers through difluoromethylation of disulfides using TMS-CF2H
-
We report an operationally simple, metal-free approach for the late-stage introduction of the important lipophilic hydrogen-bond donor motif, SCF2H. This reaction converts diaryl- and dialkyl-disulfides into the corresponding aryl/alkyl-SCF2H through the nucleophilic transfer of a difluoromethyl group with good functional group tolerance. This method is notable for its use of commercially available TMSCF2H, and does not rely on the need for handling of sensitive metal complexes.
- Howard, Joseph L.,Schotten, Christiane,Alston, Stephen T.,Browne, Duncan L.
-
supporting information
p. 8448 - 8451
(2016/07/07)
-
- An efficient and convenient method for the preparation of disulfides from thiols using oxygen as oxidant catalyzed by tert-butyl nitrite
-
An efficient and convenient tert-butyl nitrite-catalyzed selective aerobic oxidation of thiols has been developed. Under the optimal reaction conditions, a number of thiol derivatives including aromatic thiols, heteroaromatic thiols and aliphatic thiols can be converted into their corresponding disulfides in good to excellent yields.
- Yi, Shan-Li,Li, Mei-Chao,Hu, Xin-Quan,Mo, Wei-Min,Shen, Zhen-Lu
-
p. 1505 - 1508
(2016/09/23)
-
- Synthesis of β-Hydroxysulfides from Thiophenols and Disulfides with tert-Butyl Hydroperoxide as the Oxidant and Reactant
-
In this Communication, we developed a new procedure for the synthesis of β-hydroxysulfides from thiophenols or diaryl disulfides with TBHP as the oxidant. In the presence of zinc iodide or potassium iodide, with TBHP as the oxidant and pre-reactant, thiophenols and diaryl disulfides reacted with the methyl group of tBuOH smoothly and selectivity to give the corresponding 2-methyl-1-(arylthio)propan-2-ols as the terminal products in moderate to good yields.
- Feng, Jian-Bo,Wu, Xiao-Feng
-
p. 315 - 318
(2016/08/19)
-
- Ligand-Controlled Divergent Cross-Coupling Involving Organosilicon Compounds for Thioether and Thioester Synthesis
-
A divergent cross-coupling for both thioether and thioester construction from organosilicon compounds has been developed. Predominant selectivity for Hiyama-type coupling and C1 insertion reaction was achieved under the guidance of ligands. Thioether was obtained under ligand-free conditions in which disulfide generated from homocoupling could be prevented. Meanwhile, application of bidentate phosphine ligands under carbon monoxide atmosphere (CO balloon) afforded the thioester with little decomposition, which was revealed through interval NMR tracking.
- Qiao, Zongjun,Jiang, Xuefeng
-
p. 1550 - 1553
(2016/05/02)
-
- CO2-promoted oxidative cross-coupling reaction for C-S bond formation via masked strategy in an odourless way
-
Cu-catalyzed direct oxidative cross-coupling between boronic acids and masked sulfides delivering thioethers was described, in which the SO3-, as a mask, has shown a distinctive effect on the oxidative cross-coupling condition. Disulfide could be suppressed efficiently via masked strategy under CO2 atmosphere. A broad scope of aromatics and scalable processes indicates its practicality, which could be further applied to drug late-stage modification and unsymmetrical dibenzothiophenes (DBTs) synthesis.
- Qiao, Zongjun,Ge, Nanyang,Jiang, Xuefeng
-
p. 10295 - 10298
(2015/06/25)
-
- A novel nickel-catalyzed domino method for the direct synthesis of symmetrical disulfides using potassium 5-methyl-1,3,4-oxadiazole-2-thiolate as a sulfurating reagent
-
A simple, one pot, efficient, and novel protocol has been developed for the direct synthesis of symmetrical organic disulfides using a domino reaction between an aryl/alkyl halide and potassium 5-methyl-1,3,4-oxadiazole-2-thiolate in the presence of NiCl2 as catalyst. A variety of symmetrical aryl/alkyl disulfides can be obtained in moderate to excellent yields (up to 95%).
- Soleiman-Beigi, Mohammad,Mohammadi, Fariba
-
supporting information
p. 911 - 914
(2015/04/27)
-
- Synthesis of disulfides and diselenides by copper-catalyzed coupling reactions in water
-
A simple and efficient protocol for copper-catalyzed coupling reactions between aryl halides and elemental sulfur or selenium has been developed. A variety of disulfides and diselenides can be obtained in moderate to excellent yields up to 96%. The Royal Society of Chemistry 2013.
- Li, Zhengkai,Ke, Fang,Deng, Hang,Xu, Hualong,Xiang, Haifeng,Zhou, Xiangge
-
supporting information
p. 2943 - 2946
(2013/07/25)
-
- An efficient, one-pot and CuCl-catalyzed route to the synthesis of symmetric organic disulfides via domino reactions of thioacetamide and aryl (alkyl) halides
-
In this article, a simple, general and novel method for the synthesis of diaryl (dialkyl) disulfides from aryl (alkyl) halides is described. This is a convenient approach that involves the use of commercially available and inexpensive thioacetamide as a sulfur transfer reagent in the domino process for the synthesis of symmetric organic disulfides. Copyright
- Soleiman-Beigi, Mohammad,Hemmati, Maryam
-
p. 734 - 736
(2013/12/04)
-
- A novel copper-catalyzed, one-pot synthesis of symmetric organic disulfides from alkyl and aryl halides: Potassium 5-methyl-1,3,4-oxadiazole-2-thiolate as a novel sulfur transfer reagent
-
A new method is reported for the synthesis of symmetric diaryl and dialkyl disulfides from aryl and alkyl halides in the presence of copper using potassium 5-methyl-1,3,4-oxadiazole-2-thiolate as the base, ligand, and sulfur-transfer reagent.
- Soleiman-Beigi, Mohammad,Mohammadi, Fariba
-
p. 7028 - 7030
(2013/01/15)
-
- Diethylamine-catalyzed dimerization of thiols: An inexpensive and green method for the synthesis of homodisulfides under aqueous conditions
-
Under H2O / Et2NH / atmospheric oxygen conditions, thiols are converted to their respective homodisulfides within a few hours. The process is conducted at room temperature for quantitative dimerization of aromatic, benzylic, and aliphatic thiols without the use of any extra additive. Copyright Taylor & Francis Group, LLC.
- Abaee, M. Saeed,Mojtahedi, Mohammad M.,Navidipoor, Somayeh
-
experimental part
p. 170 - 176
(2011/03/19)
-
- Efficient synthesis of unsymmetrical disulfides
-
A novel way of synthesizing unsymmetrical disulfides from thiols with DDQ is presented here. This procedure ran in a straightforward manner to give high product yields. Unsymmetrical disulfides were directly synthesized from the corresponding mixture of thiols in equimolar amounts under mild conditions.
- Vandavasi, Jaya Kishore,Hu, Wan-Ping,Chen, Chung-Yu,Wang, Jeh-Jeng
-
experimental part
p. 8895 - 8901
(2011/11/30)
-
- Study on the reactions of 3-bromo-4-ethoxy-1,1,1-trifluoro-3-buten-2-one with benzenethiols promoted by InCl3?4H2O
-
In the presence of InCl3?4H2O, the reaction of 3-bromo-4-ethoxy-1,1,1-trifluoro-3-buten-2-one 2 with a series of benzenethiols proceeds readily and gave both the addition-elimination product 3-bromo-1,1,1-trifluoro-4-thiophenyl-but-3-en-2-one and substitution product 1,1,1-trifluoro-3,4-bis-thiophenyl-but-3-en-2-one. The reactivity of benzenethiols is discussed in terms of their substituted group.
- Zhao, Jingwei,Song, Tao,Jiang, Huiling,Xu, Liangzhong,Zhu, Shizheng
-
experimental part
p. 1623 - 1629
(2011/07/07)
-
- Simple, extremely fast, and high-yielding oxidation of thiols to disulfides
-
Results of oxidation of thiols to disulfides with 1,3-dibromo-5,5-dimethyl- hydantoin (DBDMH) are described. A simple addition of 0.20-0.25 mol equivalent of solid DBDMH to thiol in chloroform at room temperature yielded the disulfides in excellent yield. The reaction is extremely fast and gave no other oxidized side products. Copyright Taylor & Francis, Inc.
- Alam, Ashraful,Takaguchi, Yutaka,Tsuboi, Sadao
-
p. 1329 - 1333
(2007/10/03)
-
- Kinetics of the alkaline hydrolysis of 2-thioaryl-3, 5-dinitropyridine derivatives in 50% v/v DMSO-water
-
The kinetics of the alkaline hydrolysis of substituted 2-thioaryl-3,5-dinitropyridine have been studied in 50% DMSO-water. The observed rate constants and the second order rate constants were calculated. The thermodynamic parameters for the unsubstituted compound reveals the activating power of the two nitro- and aza-groups.
- Fathalla, Magda F.,Ibrahim, Mahmoud F.,Hamed, Ezzat A.
-
p. 150 - 151
(2007/10/03)
-
- Microwave thermolysis I: A convenient and rapid coupling of thiols using 'Clayan' in solvent free condition
-
Oxidative coupling of thiols into disulfides using 'Clayan' under microwave irradiation in described. The rapid reaction and dry medium are the important features of the reaction.
- Meshram,Bandyopadhyay,Reddy,Yadav
-
p. 701 - 706
(2007/10/03)
-
- Organosulfur compounds as pre-exposure therapy for threat agents.
-
A series of symmetric (Ar-S-S-Ar) and unsymmetric (Ar-S-S-CH2CH2NH3+Cl-) disulfides have been prepared and evaluated as potential cyanoprotective agents. Target compounds have been prepared by known methods and/or methods developed by us specifically for this program, e.g. reaction of a thiol with 2,2'-dithiobis(benzothiazole) (BT-S-S-BT) followed by reaction with a second thiol. Both 4-methoxyphenyl disulfide and 2-aminoethyl-4-methoxyphenyl disulfide hydrochloride are cyanoprotective against 2-LD50 of injected cyanide. Evaluation of both symmetric and unsymmetric related disulfides indicates that structural requirements for cyanoprotective activity are stringent and strongly suggest that protection is enzyme mediated. In addition to cyanoprotective action, initial results suggest that unsymmetric disulfides may evolve into effective antimustard agents.
- Ternay Jr.,Brzezinska,Sorokin,Cook,Lyaschenko
-
-
- Discovery and synthesis of a potent sulfonamide ET(B) selective antagonist
-
The synthesis and structure-activity relationships of a series of sulfonamide endothelin antagonists are described. In the course of our modification studies, we discovered ET(B) selective antagonists. The most potent compound 15f displays IC50 values of 1.7 μM and 0.002 μM to ET(A) and ET(B) receptors, respectively. (C) 2000 Elsevier Science Ltd. All rights reserved.
- Kanda, Yasuhiko,Takahashi, Tadashi,Araki, Yoshitaka,Konoike, Toshiro,Mihara, Shin-ichi,Fujimoto, Masafumi
-
p. 1875 - 1878
(2007/10/03)
-
- Kinetics and mechanism of oxidation of S-phenylthioacetic acids by Ce(IV)
-
The kinetics of oxidation of several S-phenylthioacetic acids by ceric ammonium nitrate (CAN) in presence of perchloric acid has been studied spectrophotometrically in 50% (v/v) aqueous acetic acid. The order with respect to Ce(IV) is one and the order with respect to S-phenylthioacetic acid is found to be 0.8. A linear plot of k(obs)-1 vs [substrate]-1 with an intercept on the rate axis suggests the formation of an equilibrium complex between the reactants prior to the rate determining step. The added acrylonitrile retards the reaction rate considerably suggesting that the oxidation process may involve a free radical mechanism. Electron-releasing substituents generally accelerate the rate, while electron-withdrawing groups retard the rate. A good correlation is found to exist between log k1.8 and Hammet σ contants. Rate = k1[Ce(IV)(T)] / 1/K[S] + K(h)[H2O]/K[S][H+] + 1 where 'S' is the substrate K1, K(h) are equilibrium constants and k1 is the rate constant for the rate limiting step.
- Gurumurthy, Rajagopala,Gopalakhrishnan, Mannathusamy,Sathiyanarayanan, Kulathu Iyer
-
p. 13731 - 13738
(2007/10/02)
-
- A useful sulfur-transfer reaction with tetrathiomolybdate: Conversion of arylamines to aryl disulfides
-
A convenient method for the synthesis of a series of symmetrical aryl disulfides from arylamines via the reaction of their stable diazonium salts with tetrathiomolybdate under anhydrous conditions is described.
- Bhar,Chandrasekaran
-
p. 785 - 786
(2007/10/02)
-
- Efficient, high yield oxidation of thiols and selenols to disulphides and diselenides
-
Thiols and selenols are smoothly oxidised in high yield to disulphides and diselenides by sodium perborate at room temperature.
- McKillop,Koyuncu,Krief,Dumont,Renier,Trabelsi
-
p. 5007 - 5010
(2007/10/02)
-
- The co-oxidation reaction of isoprene and some aromatic thiols
-
The co-oxidation reaction between isoprene, some aromatic thiols and molecular oxygen is described.The product distribution, in relation to the nature of the aromatic thiol used, is examined.Steric and electronic factors are discussed.
- Laan, R. van der,Moolenaar, M.J.,Koning, H. de,Huisman, H.O.
-
p. 220 - 225
(2007/10/02)
-