- METHOD FOR PRODUCING ARENE COMPOUNDS AND ARENE COMPOUNDS PRODUCED BY THE SAME
-
Provided is a method for producing (alkyl)arene compounds represented by Formulae 3-1, 3-2, and 3-3 by the Friedel-Crafts alkylation reaction of alkyl halide compounds and arene compounds using organic phosphine compounds as a catalyst.
- -
-
Paragraph 0122
(2021/06/26)
-
- Ionic iron(III) complexes bearing a dialkylbenzimidazolium cation: Efficient catalysts for magnesium-mediated cross-couplings of aryl phosphates with alkyl bromides
-
A series of ionic iron(III) complexes of general formula [HLn][FeX4] (HL1?=?1,3-dibenzylbenzimidazolium cation, X?=?Cl, 1; HL1, X?=?Br, 2; HL2?=?1,3-dibutylbenzimidazolium cation, X?=?Br, 3; HL3?=?1,3-bis(diphenylmethyl)benzimidazolium cation, X?=?Br, 4) were easily prepared in high yields by the direct reaction of FeX3 with 1 equiv. of [HLn]X under mild conditions. All of them were characterized using elemental analysis, Raman spectroscopy and electrospray ionization mass spectrometry, and X-ray crystallography for 1 and 4. In the presence of magnesium turnings and LiCl, these air- and moisture-insensitive complexes showed high catalytic activities in direct cross-couplings of aryl phosphates with primary and secondary alkyl bromides with broad substrate scope, wherein complex 4 was the most effective.
- Li, Zhuang,Lu, Bing,Sun, Hongmei,Shen, Qi,Zhang, Yong
-
-
- Alkyl Grignard cross-coupling of aryl phosphates catalyzed by new, highly active ionic iron(II) complexes containing a phosphine ligand and an imidazolium cation
-
A novel family of ionic iron(ii) complexes of the general formula [HL][Fe(PR′3)X3] (HL = 1,3-bis(2,6-diisopropylphenyl)imidazolium cation, HIPr, R′ = Ph, X = Cl, 2; HL = HIPr, R′ = Cy, X = Cl, 3; HL = HIPr, R′ = Ph, X = Br, 4; HL = HIPr, R′ = Cy, X = Br, 5; HL = 1,3-bis(2,4,6-trimethylphenyl)imidazolium cation, HIMes, R′ = Cy, X = Br, 6) was easily prepared via a stepwise approach in 88%-92% yields. In addition, an ionic iron(ii) complex, [HIPr][Fe(C4H8O)Cl3] (1), has been isolated from the reaction of FeCl2(THF)1.5 with one equiv. of [HIPr]Cl in 90% yield and it can further react with one equiv. of PPh3 or PCy3, affording the corresponding target iron(ii) complex 2 or 3, respectively. All these complexes were characterized by elemental analysis, electrospray ionization mass spectrometry (ESI-MS), 1H NMR spectroscopy and X-ray crystallography. These air-insensitive complexes 2-6 showed high catalytic activities in the cross-coupling of aryl phosphates with primary and secondary alkyl Grignard reagents with a broad substrate scope, wherein [HIPr][Fe(PCy3)Br3] (5) was the most effective. Complex 5 also catalyzes the reductive cross-coupling of aryl phosphates with unactivated alkyl bromides in the presence of magnesium turnings and LiCl, as well as the corresponding one-pot acylation/cross-coupling sequence under mild conditions.
- Li, Zhuang,Liu, Ling,Sun, Hong-Mei,Shen, Qi,Zhang, Yong
-
p. 17739 - 17747
(2016/11/18)
-
- Ionic iron (II) composition as well as preparation method and application thereof
-
The invention discloses an ionic iron (II) composition as well as a preparation method and application thereof. The ionic iron (II) composition contains phosphine ligands and imidazole (quinoline) cations, and the general formula of the ionic iron (II) is [Fe(PR3)X3][(R1NCHnCHnNR1)CH], wherein X is selected from one of chlorine or bromine. The ionic iron (II) composition containing the phosphine ligands and the imidazole (quinoline) cations can efficiently catalyze a phosphoric acid aryl diethyl ester compound and an alkyl group Grignard reagent to perform a crisscross coupling reaction, and particularly can effectively catalyze an unactivated phosphoric acid aryl diethyl ester compound and the alkyl group Grignard reagent to perform the reaction.
- -
-
Paragraph 0059
(2017/01/02)
-
- Iron-catalyzed cross-coupling reaction of alkyl halides with biphenyl grignard reagent
-
In the presence of a catalytic amount of iron salts and N,N,N',N'-tetramethylethylene diamine as additive, alkyl bromide reacted with biphenyl magnesium bromide to obtain the cross-coupling product in good yields. The suitable amount of catalyst and the additive are 5 % mol (based on alkyl bromide), 1.3 equiv(based on alkyl bromide), respectively. Under the optimal conditions, the yields of the crosscoupling could reach up to 92.3 %.
- Dai,Liu,Zhang,Wei,Guan
-
p. 6303 - 6305
(2013/07/26)
-
- Synthesis of thiophene/phenylene co-oligomers. V [1]. Functionalization at molecular terminals toward optoelectronic device applications
-
(Chemical Equation Presented) We report the synthesis of various thiophene/phenylene co-oligomers with a total number of thiophene and benzene (phenylene) rings of 5 and 6 with various terminal groups. Those terminal groups have been chosen from among alkyl groups, methoxy groups, trifluoromethyl groups, and cyano groups. The molecular backbone of these compounds comprises phenyl- or biphenylyl-capped thiophene (or oligothiophene) or an alternating co-oligomer. The synthesis is based on either the Suzuki coupling reaction or the Negishi coupling reaction. These reaction schemes enabled us to obtain the target compounds in high quality. In particular, the latter coupling method turned out to produce the compounds at a high yield. The terminal groups are expected to produce various functionalities based upon their electron donating character (alkyl groups and methoxy groups) or electron withdrawing character (trifluoromethyl groups and cyano groups). Additionally some of these groups bring about enhanced solubility. This will lead to the production of a diversity of modified compounds of thiophene/phenylene co-oligomers. To give an example that demonstrates usefulness of the target compounds, we present optoelectronic data that are associated with their device applications.
- Katagiri, Toshifumi,Ota, Satoshi,Ohira, Takayuki,Yamao, Takeshi,Hotta, Shu
-
p. 853 - 862
(2008/04/12)
-
- Structural Characterization of Crystalline Ternary Inclusion Compounds at the Air-Water Interface
-
Crystalline ternary inclusion monolayers consisting of a two-dimensional hydrogen-bonded host network of guanidinium (G) ions and organosulfonate (S) amphiphiles, and biphenylalkane guests, can be generated at the air-water interface through synergistic structural enforcement by hydrogen bonding and host-guest packing. Surface pressure-area isotherms of the 4′ -hexadecylbiphenyl-4-sulfonate (C16BPS) amphiphile in the presence of G, with or without guest, are characterized by lift-off molecular areas expected for the GS sheet based on single-crystal X-ray structures of homologous bulk crystals. Intercalation of biphenylalkane guests (4-CnH 2n+1-C6H4-C6H5, n = 1, 4, 6, 10, 16; denoted CnBP) between organosulfonate hydrophobes, which define pocketlike cavities in the GS monolayer host, afford ternary inclusion monolayers with a 1:1 host-guest stoichiometry. These inclusion monolayers are less compressible than the guest-free host, consistent with dense packing of the biphenylalkane moieties of the host and the biphenylalkane guests. The inclusion monolayers are distinguished from the amorphous guest-free host and from selected guanidinium-free mixed monolayers by structural characterization with grazing-angle incidence X-ray diffraction (GIXD). The GIXD data for the ternary (G)C16BPS:C16BP and (G)C16BPS:C6BP inclusion monolayers obtained upon compression are consistent with a rectangular unit cell. The dimensions of these unit cells and refinement of the GIXD data suggest a "rotated shifted ribbon" GS hydrogen-bonding motif similar to that observed in some bulk GS crystals, including (G) (ethylbiphenylsulfonate). GIXD reveals that (G)C16BPS:C16BP and (G)C16BPS:C6BP are more crystalline than the corresponding guanidinium-free mixed monolayers. The (G)C16BPS:C6BP inclusion monolayer is stable upon compression, even though the alkyl-alkyl host-guest interactions are reduced due to the shorter hexyl substituents of the guest, demonstrating an important reinforcing role for the hydrogen-bonded GS sheet. The structure of a C16BPS: tetracosane (C24) mixed monolayer is independent of G; the unit cell symmetry and dimensions suggest a structure governed by alkyl-alkane interactions that prohibit formation of a GS network. These results illustrate that the existence of ternary inclusion monolayers with an intact GS network requires guest molecules that are structurally homologous with the hydrophobes of the host, in this case biphenylalkanes. The observation of these inclusion compounds suggests an approach for introducing functional nonamphiphilic molecules to an air-water interface through inclusion in a well-defined host.
- Plaut, David J.,Martin, Stephen M.,Kjaer, Kristian,Weygand, Markus J.,Lahav, Meir,Leiserowitz, Leslie,Weissbuch, Isabelle,Ward, Michael D.
-
p. 15922 - 15934
(2007/10/03)
-
- SYNTHESIS OF 4-ALKYL-4'-CYANOBIPHENYLS
-
Liquid crystals of the 4-alkyl-4'-cyanobiphenyl group were synthesized without the use of copper cyanide. 4-Alkyl-4'-formylbiphenyls and the 4-formyloximes of 4'-alkylbiphenyl, which possess a liquid-crystalline state, were isolated.Beginning with the pentyl homolog, they form an enantiotropic nematic phase, and beginning with octyl homolog they also form a smectic meso phase.
- Ruolene, Yu. I.,Adomenas, P. V.,Sirutkaitis, R. A.,Denis, G. I.
-
p. 1187 - 1191
(2007/10/02)
-
- NEW SIMPLE METHOD FOR OBTAINING 4-n-ALKYL-4 prime -CYANOBIPHENYLS.
-
A new method is described of obtaining 4-n-alkyl-4 prime -cyanobiphenyls from biphenyl. First biphenyl is acrylated and the resulting ketone is reduced in conditions of the Huang-Minlon reaction; next the obtained 4-n-alkylbiphenyl is converted to 4-n-alkyl-4 prime -iodobiphenyl which readily reacts with copper cyanide giving the required nitrile with a good yield.
- Dabrowski,Witkiewicz,Kenig
-
p. 251 - 259
(2007/10/02)
-
