- Br?nsted Acid Catalyzed Tandem Defunctionalization of Biorenewable Ferulic acid and Derivates into Bio-Catechol
-
An efficient conversion of biorenewable ferulic acid into bio-catechol has been developed. The transformation comprises two consecutive defunctionalizations of the substrate, that is, C?O (demethylation) and C?C (de-2-carboxyvinylation) bond cleavage, occurring in one step. The process only requires heating of ferulic acid with HCl (or H2SO4) as catalyst in pressurized hot water (250 °C, 50 bar N2). The versatility is shown on a variety of other (biorenewable) substrates yielding up to 84 % di- (catechol, resorcinol, hydroquinone) and trihydroxybenzenes (pyrogallol, hydroxyquinol), in most cases just requiring simple extraction as work-up.
- Bal, Mathias,Bomon, Jeroen,Liao, Yuhe,Maes, Bert U. W.,Sels, Bert F.,Sergeyev, Sergey,Van Den Broeck, Elias,Van Speybroeck, Veronique
-
supporting information
p. 3063 - 3068
(2020/02/05)
-
- Sequential Cleavage of Lignin Systems by Nitrogen Monoxide and Hydrazine
-
The cleavage of representative lignin systems has been achieved in a metal-free two-step sequence first employing nitrogen monoxide for oxidation followed by hydrazine for reductive C?O bond scission. In combining nitrogen monoxide and lignin, the newly developed valorization strategy shows the particular feature of starting from two waste materials, and it further exploits the attractive conditions of a Wolff-Kishner reduction for C?O bond cleavage for the first time. (Figure presented.).
- Altmann, Lisa-Marie,Heinrich, Markus R.,Hofmann, Dagmar,Hofmann, Laura Elena,Prusko, Lea
-
supporting information
(2020/03/27)
-
- Cobalt Nanoparticles-Catalyzed Widely Applicable Successive C?C Bond Cleavage in Alcohols to Access Esters
-
Selective cleavage and functionalization of C?C bonds have important applications in organic synthesis and biomass utilization. However, functionalization of C?C bonds by controlled cleavage remains difficult and challenging because they are inert. Herein, we describe an unprecedented efficient protocol for the breaking of successive C?C bonds in alcohols to form esters with one or multiple carbon atoms less using heterogeneous cobalt nanoparticles as catalyst with dioxygen as the oxidant. A wide range of alcohols including inactive long-chain alkyl aryl alcohols undergo smoothly successive cleavage of adjacent ?(C?C)n? bonds to afford the corresponding esters. The catalyst was used for seven times without any decrease in activity. Characterization and control experiments disclose that cobalt nanoparticles are responsible for the successive cleavage of C?C bonds to achieve excellent catalytic activity, while the presence of Co-Nx has just the opposite effect. Preliminary mechanistic studies reveal that a tandem sequence reaction is involved in this process.
- Dai, Wen,Gao, Shuang,Li, Guosong,Luo, Huihui,Lv, Ying,Shang, Sensen,Wang, Lianyue
-
supporting information
p. 19268 - 19274
(2020/08/26)
-
- CATALYTIC DEPOLYMERIZATION OF LIGNIN TO HIGH VALUE HYDROCARBONS
-
The present disclosure provides for methods for depolymerizing lignin to produce other useful products. For example, low molecular weight aromatic and aliphatic hydrocarbons (e.g., hydrocarbons having 8 to 20 carbon atoms (C8 to C20 hydrocarbons)) as well as oil products can be produced using methods of the present disclosure. The method can include treatment of the lignin using a catalyst composition, where the catalyst composition comprises a persulfate salt and a transition metal catalyst.
- -
-
Page/Page column 20; 21
(2021/01/23)
-
- Transition-metal-free conversion of lignin model compounds to high-value aromatics: Scope and chemoselectivity
-
An efficient and straightforward reaction protocol for the conversion of lignin model compounds was developed based on a simple system consisting of a base, oxygen, and a green solvent under mild conditions in the absence of metals. This protocol was successfully applied to the cleavage of both 'β-O-4' dimeric and trimeric compounds, and a controlled selective degradation was achieved depending on the bond type. The feasibility of this method to provide aromatic compounds in high yields from lignin by a sequential oxidative dehomologation reaction was clearly demonstrated.
- Lee, Tae Woo,Yang, Jung Woon
-
p. 3761 - 3771
(2018/08/21)
-
- SELECTIVE C-O BOND CLEAVAGE OF OXIDIZED LIGNIN AND LIGNIN-TYPE MATERIALS INTO SIMPLE AROMATIC COMPOUNDS
-
A method to cleave C-C and C-0 bonds in β-Ο-4 linkages in lignin or lignin sub-units is described. The method includes oxidizing at least a portion of secondary benzylic alcohol groups in β-Ο-4 linkages in the lignin or lignin sub-unit to corresponding ketones and then leaving C-0 or C-C bonds in the oxidized lignin or lignin sub-unit by reacting it with an organic carboxylic acid, a salt of an organic carboxylic acids, and/or an ester of an organic carboxylic acids. The method may utilize a metal or metal-containing reagent or proceed without the metal or metal-containing reagent.
- -
-
-
- Isolation of functionalized phenolic monomers through selective oxidation and CO bond cleavage of the β-O-4 linkages in Lignin
-
Functionalized phenolic monomers have been generated and isolated from an organosolv lignin through a two-step depolymerization process. Chemoselective catalytic oxidation of β-O-4 linkages promoted by the DDQ/tBuONO/ O2 system was achieved in model compounds, including polymeric models and in real lignin. The oxidized β-O-4 linkages were then cleaved on reaction with zinc. Compared to many existing methods, this protocol, which can be achieved in one pot, is highly selective, giving rise to a simple mixture of products that can be readily purified to give pure compounds. The functionality present in these products makes them potentially valuable building blocks.
- Lancefield, Christopher S.,Ojo, O. Stephen,Tran, Fanny,Westwood, Nicholas J.
-
p. 258 - 262
(2015/02/19)
-
- Chemoselective metal-free aerobic alcohol oxidation in lignin
-
An efficient organocatalytic method for chemoselective aerobic oxidation of secondary benzylic alcohols within lignin model compounds has been identified. Extension to selective oxidation in natural lignins has also been demonstrated. The optimal catalyst system consists of 4-acetamido-TEMPO (5 mol %; TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) in combination with HNO3 and HCl (10 mol % each). Preliminary studies highlight the prospect of combining this method with a subsequent oxidation step to achieve C-C bond cleavage.
- Rahimi, Alireza,Azarpira, Ali,Kim, Hoon,Ralph, John,Stahl, Shannon S.
-
p. 6415 - 6418
(2013/06/05)
-