Specification of Double-shaft Paddle Mixer
Characteristic:
1 widely applied to feed, pemix, enrichment, chemical, food and pharmaceutical industries
2. M
Specification of GHL High Speed Mixing Granulator
1. Application:
This is an equipment for tablet production in pharmaceutical industry, which can prepare ideal p
Specification of MR-C3 Rotorless Rheometer
1. Description: The curves and characteristic parameters on vulcanization of rubber materials can be obtained using rotorless R
Specification of CDL7MC Super Capacity Refrigerated Centrifuge
1. Application:
It is widely used in the field of blood station, pharmaceutical factory, biochemis
Specification of Tablet/Capsule Hardness Tester
1. Application: ST-2 tablet hardness tester is used as drug test instruments to test the hardness of tablet or capsule. Tab
Specification of Vertical Ball Mill for Chemicals
Description: This kind of mills are widely used for producing paint, ink, coating, pesticide in fine chemical industry, e
Specification of TFD Jacketed Glass Reactor
Features:
1. AC Induction Motor with Stepless speed regulation, no dynamo brush, spark-free;
2. G3.3 Pyrex Gl
Specification of R5002B Lab Instrument Rotary Evaporator
1.LCD Rotary Evaporator
2.specification 1-50L
3.Sealing of the system is good, high vacuum degre
Specification of SK-400 Mixing Mill
Description: This machine is double roller opening to be used for rubber mixing. It consists of seat, Frame, Rubber, Driving devic
Specification of Vulcanizing Press
1. Application:
The machine applies to sulfur zing various kinds of rubber and plastic model products as well as non-model prod
Specification of Oxygen Machine
Characteristics :
1. and electricity as fuel with no explosion danger, so it is easy to operate and safe to store up.
2.
Specification of Dryer for Vegetable Dehydration
Descriptions: DWT Series Dryer for Vegetable Dehydration, researched and developed on the basis of the traditional mesh b
Specification of High Efficient Fluid-bed Dryer
Description: When air is purified and heated, it is introduced from the bottom of machine by the induced-draft f
