1. Introduction of N,N-Dimethylcyclohexylamine
N,N-Dimethylcyclohexylamine is iuntermediate used in the production of petroleum additives. It is also called Cyclohexylamine,N,N-dimethyl- (6CI,7CI,8CI).

2. Properties of N,N-Dimethylcyclohexylamine
MP: -60 °C 
BP: 160 °C
Density: 0.849 g/mL at 25 °C(lit.)
Vapor pressure: 3.6 mm Hg ( 20 °C)
Refractive index: n 20/D 1.454(lit.)
Water Solubility: 10 g/L (20 °C)
Solubility: 10 g/L (20°C)
Storage tem : Flammables area
Fp: 108 °F
FreezingPoint : <-77°C
BRN : 1919922

3. Structure Descriptors of N,N-Dimethylcyclohexylamine
InChI: InChI=1S/C8H17N/c1-9(2)8-6-4-3-5-7-8/h8H,3-7H2,1-2H3
InChIKey: SVYKKECYCPFKGB-UHFFFAOYSA-N
Canonical SMILES : CN(C)C1CCCCC1

4. Safety Information of N,N-Dimethylcyclohexylamine

Hazard Codes : C,N,T
Risk Statements : 10-20/21/22-34-50/53-23/24-22 
R10:Flammable. 
R20/21/22:Harmful by inhalation, in contact with skin and if swallowed. 
R34:Causes burns. 
R22:Harmful if swallowed. 
R23 :Toxic by inhalation. 
R24:Toxic in contact with skin.
Safety Statements : 26-28-36/37/39-45-61-28A-16 
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 
S28:After contact with skin, wash immediately with plenty of soap-suds. 
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection. 
S45:In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) 
S61:Avoid release to the environment. Refer to special instructions / safety data sheets. 
S28:After contact with skin, wash immediately with plenty of soap-suds. 
S16:Keep away from sources of ignition.
RIDADR : UN 2264 8/PG 2
HazardClass : 8
PackingGroup : II
HS Code : 29213010
WGK Germany :1
RTECS : GX1198000

5. Preparation of N,N-Dimethylcyclohexylamine
N,N-Dimethylcyclohexylamine has been prepared by catalytic reductive alkylation and by the Leuckart reaction. The present method is experimentally simple, requires no special apparatus, and is generally applicable to the synthesis of a variety of primary, secondary, and tertiary amines.

6. Use of N,N-Dimethylcyclohexylamine
N,N-Dimethylcyclohexylamine is mainly used as catalyst for rigid POLYURETHANE FOAM. What's more, it is used in rigid foams, leads to a well-balanced proportion of gelling and blowing reactions. And it is also intermediate used in the production of agricultural chemicals, the production of rubber chemicals. the production of corrosion inhibitors.