Welcome to LookChem.com Sign In|Join Free
  • or
Home > Products >  > 

Octachloronaphthalene

Related Products

Hot Products

Name

Octachloronaphthalene

EINECS 218-778-7
CAS No. 2234-13-1 Density 1.842 g/cm3
PSA 0.00000 LogP 8.06700
Solubility insoluble in water Melting Point 185 °C
Formula C10Cl8 Boiling Point 424.7 °C at 760 mmHg
Molecular Weight 403.734 Flash Point 214.2 °C
Transport Information UN 1145 3/PG 2 Appearance pale yellow solid with an aromatic odor
Safety 36/39-62-61-60 Risk Codes 22-67-65-50/53-38-11
Molecular Structure Molecular Structure of 2234-13-1 (Perchloronaphthalene) Hazard Symbols FlammableF;DangerousN;HarmfulXn
Synonyms

Naphthalene,octachloro- (6CI,7CI,8CI,9CI);1,2,3,4,5,6,7,8-Octachloronaphthalene;Halowax1051;NSC 243655;PCN 75;Perchloronaphthalene;Perna;naphthalene, 1,2,3,4,5,6,7,8-octachloro-;

Article Data 31

Octachloronaphthalene Consensus Reports

EPA Extremely Hazardous Substances List. Community Right-To-Know List. Reported in EPA TSCA Inventory.

Octachloronaphthalene Standards and Recommendations

OSHA PEL: TWA 0.1 mg/m3 (skin); STEL 0.3 mg/m3
ACGIH TLV: TWA 0.1 mg/m3 (skin); STEL 0.3 mg/m3
NIOSH REL: TWA 0.1 mg/m3; STEL 0.3 mg/m3 (skin)

Octachloronaphthalene Specification

The Octachloronaphthalene, with the CAS registry number 2234-13-1 and EINECS registry number 218-778-7, has the IUPAC name of 1,2,3,4,5,6,7,8-octachloronaphthalene. It is a kind of pale yellow solid with an aromatic odor, and it is also insoluble in water. The molecular formula of this chemical is C10Cl8.

The physical properties of Octachloronaphthalene are as following: (1)ACD/LogP: 6.58; (2)# of Rule of 5 Violations: 1; (3)ACD/LogD (pH 5.5): 6.58; (4)ACD/LogD (pH 7.4): 6.58; (5)ACD/BCF (pH 5.5): 58535.7; (6)ACD/BCF (pH 7.4): 58535.7; (7)ACD/KOC (pH 5.5): 89970.7; (8)ACD/KOC (pH 7.4): 89970.7; (9)#H bond acceptors: 0; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 0; (12)Polar Surface Area: 0 Å2; (13)Index of Refraction: 1.684; (14)Molar Refractivity: 83.25 cm3; (15)Molar Volume: 219.1 cm3; (16)Polarizability: 33×10-24cm3; (17)Surface Tension: 55.4 dyne/cm; (18)Density: 1.842 g/cm3; (19)Flash Point: 214.2 °C; (20)Enthalpy of Vaporization: 65.29 kJ/mol; (21)Boiling Point: 424.7 °C at 760 mmHg; (22)Vapour Pressure: 5.01E-07 mmHg at 25°C.

Preparation of Octachloronaphthalene: This chemical can be prepared by decachloro-1,4-dihydro-naphthalene. The reaction will need heating and solvent diisopropyl ether, and the yield is about 81%. 

Octachloronaphthalene can be prepared by decachloro-1,4-dihydro-naphthalene

Uses of Octachloronaphthalene: It can react with methanol to produce heptachloro-8-methoxynaphthalene. This reaction will need reagent sodium hydroxide and pyridine. The reaction time is 10 minutes with heating, and the yield is about 63%.   

Octachloronaphthalene can react with methanol to produce heptachloro-8-methoxynaphthalene

You should be cautious while dealing with this chemical. It is a kind of flammble chemical which irritates respiratory system. It is also very toxic to aquatic organisms, and may cause long-term adverse effects in the aquatic environment. It may cause lung damage if swallowed, and its vapors may cause drowsiness and dizziness. Therefore, you had better take the following instructions: Wear suitable protective clothing and eye/face protection; This material and/or its container must be disposed of as hazardous waste; If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label; Avoid release to the environment. Refer to special instructions safety data sheet.

You can still convert the following datas into molecular structure:
(1)SMILES: Clc2c1c(Cl)c(Cl)c(Cl)c(Cl)c1c(Cl)c(Cl)c2Cl
(2)InChI: InChI=1/C10Cl8/c11-3-1-2(5(13)9(17)7(3)15)6(14)10(18)8(16)4(1)12
(3)InChIKey: RTNLUFLDZOAXIC-UHFFFAOYAM

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 2234-13-1