Chemistry
Product Name:Dimethanesulfonyl peroroxyde(1001-62-3)
CAS No:1001-62-3
Molecular Formula : C2H6O6S2
Molecular Weight : 190.19
History
Dimethanesulfonyl peroxide(1001-62-3) ("DMSP") was first produced by Jones and Friedrich [U.S. Pat. No. 2,619,507] by the batchwise electolysis of a 10.2N solution of methanesulfonic acid in water using shiny platinum plate electrodes at a current density of 0.2 amp/cm2. This approach resulted in deposition of the DMSP on the anode and a poor current yield (less than 20%). Deposition of the peroxide on the electrodes also resulted in explosive decomposition in subsequent preparations of DMSP [R. N. Haszeldine, R. B. Heslop, and J. W. Lethbridge, J. Chem. Soc., Part A, 4901-7 (1964)]. Myall and Pletcher [C. J. Myall and D. Pletcher, J. Chem. Soc., Perkin Trans, 1 (10), 953-5 (1975)] produced DMSP by batchwise constant current electrolysis of a solution of sodium methanesulfonate in anhydrous methanesulfonic acid in a divided electrolysis cell. This method resulted in improved (63%) current yields, but it requires preparation of sodium methanesulfonate and recovery of the product peroxide requires extensive (5:1) dilution of the aqueous methanesulfonic acid using water. In addition, divided electrolysis cells are significantly more costly than undivided cells.
Production
Dimethanesulfonyl(1001-62-3) was first produced by the batchwise electolysis of a 10.2N solution of methanesulfonic acid in water using shiny platinum plate electrodes at a current density of 0.2 amp/cm2.,then produced by batchwise constant current electrolysis of a solution of sodium methanesulfonate in anhydrous methanesulfonic acid in a divided electrolysis cell.