Products Categories
CAS No.: | 10213-10-2 |
---|---|
Name: | Sodium tungstate dihydrate |
Article Data: | 8 |
Molecular Structure: | |
Formula: | H2O.Na.1/2O4W |
Molecular Weight: | 329.858 |
Synonyms: | Tungsticacid (H2WO4), disodium salt, dihydrate (8CI);Disodium tungstate (Na2WO4)dihydrate;Sodium tungstate (Na2WO4.2H2O);Sodium tungstate dehydrate; |
EINECS: | 236-743-4 |
Density: | 4.18 g/cm3 |
Melting Point: | 698 °C |
Solubility: | Water: 730 g/L (20 °C) |
Appearance: | White to slightly yellow crystalline powder |
Hazard Symbols: | Xn |
Risk Codes: | 22-36/38 |
Safety: | 36-37/39-26 |
PSA: | 98.72000 |
LogP: | -0.60380 |
Conditions | Yield |
---|---|
In acetic acid heating, filtration; evapn., crystn.; | |
In acetic acid heating, filtration; evapn., crystn.; |
Conditions | Yield |
---|---|
In not given heating, filtration; evapn., crystn.; | |
In not given heating, filtration; evapn., crystn.; |
Conditions | Yield |
---|---|
In not given heating, filtration; evapn., crystn.; | |
In not given heating, filtration; evapn., crystn.; | |
In water for 0.333333h; |
Conditions | Yield |
---|---|
In not given heating, filtration; evapn., crystn.; | |
In melt leaching with boiling water, analogous react. with tungstenic ore; crystn.; | |
In not given heating, filtration; evapn., crystn.; | |
In melt leaching with boiling water, analogous react. with tungstenic ore; crystn.; |
sodium tungstate (VI) dihydrate
Conditions | Yield |
---|---|
above 6°C; | |
above 6°C; |
Conditions | Yield |
---|---|
In water equiv. amt. of Pb(NO3)2 and Na2WO4*2H2O dissolved in H2O are simultaneously added to H2O at equal flow rates (180 ml/min) with vigorous stirring(stirring rate 210 rpm); soln. decanted; filtered; ppt. washed (H2O); dried at 150°C; | 99.8% |
In water equiv. amt. of Pb(NO3)2 and Na2WO4*2H2O dissolved in H2O are simultaneously added to H2O at equal flow rates (15 ml/min) with vigorous stirring (stirring rate 300 rpm); soln. decanted; filtered; ppt. washed (H2O); dried at 150°C; | 99.5% |
In water equiv. amt. of Pb(NO3)2 and Na2WO4*2H2O dissolved in H2O are simultaneously added to H2O at equal flow rates (17 ml/min) with vigorous stirring (stirring rate 300 rpm); soln. decanted; filtered; ppt. washed (H2O); dried at 150°C; | 99.7% |
sodium tungstate (VI) dihydrate
(tetrabutylammonium)4H3PW11O39
Conditions | Yield |
---|---|
With hydrogenchloride In water stirring (1 h, room temp.); washing (water and diethyl ether), drying (vac., 60°C); elem. anal.; | 99% |
Methyl 6-methylnicotinate
sodium tungstate (VI) dihydrate
5-(methoxycarbonyl)-2-methylpyridine 1-oxide
Conditions | Yield |
---|---|
With dihydrogen peroxide In methanol; water | 98% |
Conditions | Yield |
---|---|
With dihydrogen peroxide; tetra(n-butyl)ammonium hydrogen sulfate In toluene | 97.8% |
sodium tungstate (VI) dihydrate
benzyltrimethylammonium chloride
Conditions | Yield |
---|---|
With sulfuric acid; dihydrogen peroxide In toluene | 97.6% |
What can I do for you?
Get Best Price
The Sodium tungstate, dihydrate with CAS registry number of 10213-10-2 is also known as Tungsten, diolatodioxo-, sodium salt, hydrate (1:2:2). The IUPAC name is Disodium dioxido(dioxo)tungsten dihydrate. Its EINECS registry number is 236-743-4. In addition, the formula is H2O.Na.1/2O4W and the molecular weight is 164.62. This chemical is a white to slightly yellow crystalline powder and should be stored in cool and dry room.
Physical properties about Sodium tungstate, dihydrate are: (1)#H bond acceptors: 4; (2)#H bond donors: 2; (3)Exact Mass: 329.93126; (4)MonoIsotopic Mass: 329.93126; (5)Topological Polar Surface Area: 82.3; (6)Heavy Atom Count: 9; (7)Covalently-Bonded Unit Count: 5.
Preparation of Sodium tungstate, dihydrate. Firstly, the wolframite is crushed to 320 mesh, and reacts with 30% sodium hydroxide. Then the reaction mixture reacts with calcium chloride, hydrochloric acid and sodium hydroxide by turns to obtain sodium tungstate. At last, product is obtained after evaporation, crystallization, centrifugal dewatering and drying.
(1) MnWO4·FeWO4+4NaOH→2NaWO4+Fe(OH)2·Mb(OH)2
(2) NaWO4+CaCl2→CaWO4+2NaCl
(3) CaWO4+2HCl→CaCl2+H2WO4
(4)H2WO4+2NaOH→Na2WO4·2H2O
Uses of Sodium tungstate, dihydrate: it is used for manufacturing tungsten, tungsten acid and tungsten salts. It's also used as mordant, pigment, catalyst, fire retardant fabric, chemical reagent and inhibitor.
When you are using this chemical, please be cautious about it. As a chemical, it is irritating to eyes and skin. Besides, it is harmful if swallowed. During using it, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
You can still convert the following datas into molecular structure:
1. Canonical SMILES: O.O.[O-][W](=O)(=O)[O-].[Na+].[Na+]
2. InChI:InChI=1S/2Na.2H2O.4O.W/h;;2*1H2;;;;;/q2*+1;;;;;2*-1;
3. InChIKey: WPZFLQRLSGVIAA-UHFFFAOYSA-N
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
mouse | LD50 | intraperitoneal | 145mg/kg (145mg/kg) | BEHAVIORAL: SOMNOLENCE (GENERAL DEPRESSED ACTIVITY) BEHAVIORAL: COMA | Archives Internationales de Pharmacodynamie et de Therapie. Vol. 154, Pg. 243, 1965. |
rat | LD50 | intraperitoneal | 204mg/kg (204mg/kg) | BEHAVIORAL: SOMNOLENCE (GENERAL DEPRESSED ACTIVITY) BEHAVIORAL: COMA | Archives Internationales de Pharmacodynamie et de Therapie. Vol. 154, Pg. 243, 1965. |
rat | LD50 | subcutaneous | 251mg/kg (251mg/kg) | American Journal of the Medical Sciences. Vol. 199, Pg. 668, 1940. |