Products Categories
CAS No.: | 13078-80-3 |
---|---|
Name: | 2-Chlorophenethylamine |
Article Data: | 20 |
Molecular Structure: | |
Formula: | C8H10ClN |
Molecular Weight: | 155.627 |
Synonyms: | Phenethylamine,o-chloro- (6CI,7CI,8CI);2-(2-Aminoethyl)chlorobenzene;2-(2-Chlorophenyl)ethanamine;2-(2-Chlorophenyl)ethylamine;2-Chlorobenzeneethanamine;o-Chlorophenethylamine;o-Chlorophenylethylamine; |
EINECS: | 235-982-1 |
Density: | 1.128 g/cm3 |
Melting Point: | 145 °C |
Boiling Point: | 239.9 °C at 760 mmHg |
Flash Point: | 108.9 °C |
Appearance: | Clear colorless to yellow liquid |
Hazard Symbols: | Xi |
Risk Codes: | 36/37/38 |
Safety: | 26-36 |
Transport Information: | UN 2735 8/PG 3 |
PSA: | 26.02000 |
LogP: | 2.54150 |
3-(2-chlorophenyl)propionyl chloride
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
With sodium azide; acetone und Erwaermen des Reaktionsprodukts in Benzol, zuletzt unter Zusatz von wss.Salzsaeure; |
3-(2-chlorophenyl)propionamide
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
With alkaline aqueous sodium hypobromite |
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
With hydrogenchloride; platinum Hydrogenation; |
2-Chlorophenylacetonitrile
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
With lithium aluminium tetrahydride; aluminium trichloride | |
With borane-THF In tetrahydrofuran at 0 - 20℃; |
Diethyl N-(2-o-chlorophenylethyl)phosphoramidate
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
With hydrogenchloride at 80 - 85℃; for 1.5h; Yield given; |
dimethylenecyclourethane
chlorobenzene
A
2-(2-chlorophenyl)ethanamine
B
4-chlorophenylethylamine
Conditions | Yield |
---|---|
With aluminium trichloride for 12h; Heating; 2 equivalents of AlCl3; Yield given. Title compound not separated from byproducts; |
hydrogenchloride
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
Hydrogenation; |
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
With lithium aluminium tetrahydride In diethyl ether Heating; |
Conditions | Yield |
---|---|
With chlorine In tetrachloromethane at 25℃; Product distribution; Further Variations:; Solvents; |
2-chloro-benzaldehyde
2-(2-chlorophenyl)ethanamine
Conditions | Yield |
---|---|
Multi-step reaction with 2 steps 1: LiAlH4 / diethyl ether / Heating View Scheme | |
Multi-step reaction with 2 steps 1: water 2: platinum; aq.-ethanolic hydrochloric acid / Hydrogenation View Scheme | |
Multi-step reaction with 2 steps 1: ammonium acetate; acetic acid / 16 h / Reflux 2: lithium aluminium tetrahydride / tetrahydrofuran / 0 - 20 °C View Scheme | |
Multi-step reaction with 2 steps 1.1: ammonium acetate / acetic acid / 0.67 h / Heating / reflux 2.1: lithium aluminium tetrahydride; sulfuric acid / tetrahydrofuran / 0.58 h / 0 - 10 °C / Heating / reflux 2.2: 0.5 h / 20 °C View Scheme | |
Multi-step reaction with 2 steps 1.1: ammonium acetate; acetic acid / Neat (no solvent); Heating / reflux 2.1: aluminium hydride / tetrahydrofuran / 0.08 h / 0 °C / Heating / reflux 2.2: 0.5 h / 0 - 20 °C / Alkaline aqueous solution View Scheme |