Products Categories
CAS No.: | 136-30-1 |
---|---|
Name: | DibutylCarbamodithioic acid sodium salt |
Article Data: | 17 |
Molecular Structure: | |
Formula: | C9H19NS2.Na |
Molecular Weight: | 227.37 |
Synonyms: | Carbamicacid, dibutyldithio-, sodium salt (7CI,8CI);Carbamodithioic acid, dibutyl-,sodium salt (9CI);Accel TP;Butyl Namate;Dibutyl sodium dithiocarbamate;Dibutyldithiocarbamic acid sodium salt;Nocceler TP;Pennac SDB;Silverdibutyldithiocarbamate;Sodium DBDT;Sodium N,N-dibutyldithiocarbamate;Sodiumdibutyldithiocarbamate;Tepidone;Tepidone rubber accelerator;Vulcacure NB; |
EINECS: | 205-238-0 |
Density: | 1,09 g/cm3 |
Melting Point: | 123 - 125oC |
Boiling Point: | 257.7 °C at 760 mmHg |
Flash Point: | 109.6 °C |
Solubility: | Soluble in water, non-toxic, not suitable to touch with iron container. |
Appearance: | Pale yellow green to light brown liquid |
Hazard Symbols: | T,C,N |
Risk Codes: | 36/37/38 |
Safety: | 26-36/37/39 |
PSA: | 35.33000 |
LogP: | 2.72040 |
Conditions | Yield |
---|---|
With potassium hydroxide In water at 45℃; for 6h; Temperature; Cooling with ice; Autoclave; Large scale; | 95.4% |
With sodium hydroxide In ethanol at 0℃; for 2h; | 90% |
Stage #1: dibutylamine With sodium hydroxide In methanol; water at 0℃; for 0.333333h; Stage #2: carbon disulfide In methanol; water at 20℃; | 84% |
sodium dibutyl dithiocarbamate
Conditions | Yield |
---|---|
In chloroform; water Nb complex and Na salt of ligand in H2O-CHCl3 stirred; org. layer sepd.; dried over CaCl2; diluted with EtOH; evapd. in open beaker; elem. anal.; | 100% |
sodium dibutyl dithiocarbamate
Conditions | Yield |
---|---|
In water Nb complex added to soln. of Na salt of ligand in water; stirred for 12 h; filtered; ppt. washed with MeOH and then quickly with small amt. of Et2O; dried in vac.; elem. anal.; | 100% |
Conditions | Yield |
---|---|
In tetrahydrofuran for 5.5h; Reflux; | 89.8% |
Conditions | Yield |
---|---|
In water at 25℃; Electrolysis; Flow reactor; | 88% |
Conditions | Yield |
---|---|
In tetrahydrofuran for 5.5h; Reflux; | 85.8% |
sodium dibutyl dithiocarbamate
Triphenylphosphine oxide
bis(N,N-di(n-butyl)dithiocarbamato)dioxo(triphenylphosphine oxide)uranium(VI)
Conditions | Yield |
---|---|
In methanol; dimethyl sulfoxide byproducts: sodium nitrate; a soln. of 1 equiv of UO2(NO3)2*6H2O in MeOH-DMSO was treated with 1 equiv of Ph3PO and 2 equiv of n-Bu2NCS2Na, stirred for 30 min at room. temp.; filtered, pptd. by adding H2O to the filtrate, filtered by suction, washed with H2O, dried over CaCl2 under vac., purified by dissolving in MeOH-DMSO and reprecipitating with H2O; elem. anal.; | 85% |
N,N'-dibutyldithiocarbamic acid
(diphenyl-tert-butylphosphine)2PdCl2
sodium dibutyl dithiocarbamate
Conditions | Yield |
---|---|
In dichloromethane for 24h; Reflux; | 83% |
dichloromethane
sodium dibutyl dithiocarbamate
methylene bis-(di-n-butylamino-dithioformate)
Conditions | Yield |
---|---|
With poly(ethylene glycol) 1,500 (PEG-1,500) In water for 12h; Ambient temperature; | 80% |
sodium dibutyl dithiocarbamate
tris(di-n-butyldithiocarbamato)bismuth(III) complex
Conditions | Yield |
---|---|
Stage #1: bismuth (III) nitrate pentahydrate In ethanol for 1h; Stage #2: sodium dibutyl dithiocarbamate In ethanol at 20℃; for 4h; | 80% |
What can I do for you?
Get Best Price
The Sodium dibutyldithiocarbamate with the cas number 136-30-1. It is also called sodium N,N-dibutylcarbamodithioate, which is also it's IUPAC name, and it's system Names are (1) Carbamic acid, dibutyldithio-, sodium salt ; (2) Carbamodithioic acid, N,N-dibutyl-, sodium salt (1:1) ; (3) Carbamodithioic acid, dibutyl-, sodium salt. It belongs to the following product categories: Biphenyl & Diphenyl ether.
Physical properties about Sodium dibutyldithiocarbamate are: (1)ACD/LogP: 3.93 ; (2)# of Rule of 5 Violations: 0 ; (3)ACD/LogD (pH 5.5): 1.51 ; (4)ACD/LogD (pH 7.4): 0.28 ; (5)ACD/BCF (pH 5.5): 2.16 ; (6)ACD/BCF (pH 7.4): 1 ; (7)ACD/KOC (pH 5.5): 12.35 ; (8)ACD/KOC (pH 7.4): 1 ; (9)#H bond acceptors: 1 ; (10)#H bond donors: 0 ; (11)#Freely Rotating Bonds: 6 ; (12)Polar Surface Area: 74.13 Å2 ; (13)Flash Point: 109.6 °C ; (14)Enthalpy of Vaporization: 49.52 kJ/mol ; (15)Boiling Point: 257.7 °C at 760 mmHg ; (16)Vapour Pressure: 0.0144 mmHg at 25°C
Uses of Sodium dibutyldithiocarbamate: Sodium dibutyldithiocarbamate can react with dichloromethane to produce dibutyl-dithiocarbamic acid dibutylthiocarbamoylsulfanylmethyl ester according to the following chemical equation with poly(ethylene glycol) 1,500 (PEG-1,500) as reagent, at ambient temperature for 12 hour(s). Yield is 80 %.
When you are using this chemical, please be cautious about it as the following: It is quite irritating to eyes, respiratory system and skin. When you are using this chemical, please wear suitable gloves and eye/face protection to avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
You can still convert the following datas into molecular structure :
(1).SMILES:[Na+].[S-]C(=S)N(CCCC)CCCC
(2).InChI:InChI=1/C9H19NS2.Na/c1-3-5-7-10(9(11)12)8-6-4-2;/h3-8H2,1-2H3,(H,11,12);/q;+1/p-1
Toxic information of Mibolerone can be showed as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
mouse | LD50 | intraperitoneal | 300mg/kg (300mg/kg) | National Technical Information Service. Vol. AD277-689, |