Products Categories
CAS No.: | 17306-05-7 |
---|---|
Name: | PHENYLMETHYLVINYLCHLOROSILANE |
Article Data: | 2 |
Molecular Structure: | |
Formula: | C9H11ClSi |
Molecular Weight: | 182.725 |
Synonyms: | Silane,chloroethenylmethylphenyl- (9CI);Silane, chloromethylphenylvinyl-(6CI,7CI,8CI);Chloromethylphenylvinylsilane;Phenyl(vinyl)methyl(chloro)silane;Vinylmethyl(phenyl)chlorosilane;chloro(ethenyl)methyl(phenyl)silane;Silane, chloroethenylmethylphenyl-; |
EINECS: | 241-333-3 |
Density: | 1 g/cm3 |
Boiling Point: | 206.9 °C at 760 mmHg |
Flash Point: | 71.3 °C |
Hazard Symbols: | C |
Risk Codes: | 34 |
Safety: | 26-28-36/37/39-45 |
Transport Information: | UN 2987 8 |
PSA: | 0.00000 |
LogP: | 2.43290 |
What can I do for you?
Get Best Price
The Benzene,(chloroethenylmethylsilyl)-, with the CAS registry number 17306-05-7 and EINECS registry number 241-333-3, has the systematic name of chloro(ethenyl)methyl(phenyl)silane. It is a kind of organics, and should be stored in the dry and cool environment. And the molecular formula of the chemical is C9H11ClSi.
The characteristics of Benzene,(chloroethenylmethylsilyl)- are as followings: (1)ACD/LogP: 4.53; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 4.53; (4)ACD/LogD (pH 7.4): 4.53; (5)ACD/BCF (pH 5.5): 1621.89; (6)ACD/BCF (pH 7.4): 1621.89; (7)ACD/KOC (pH 5.5): 6907.68; (8)ACD/KOC (pH 7.4): 6907.68; (9)#H bond acceptors: 0; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 2; (12)Polar Surface Area: 0 Å2; (13)Index of Refraction: 1.505; (14)Molar Refractivity: 53.99 cm3; (15)Molar Volume: 181.8 cm3; (16)Polarizability: 21.4×10-24cm3; (17)Surface Tension: 26.3 dyne/cm; (18)Density: 1 g/cm3; (19)Flash Point: 71.3 °C; (20)Enthalpy of Vaporization: 42.51 kJ/mol; (21)Boiling Point: 206.9 °C at 760 mmHg; (22)Vapour Pressure: 0.332 mmHg at 25°C.
Preparation of Benzene,(chloroethenylmethylsilyl)-: This chemical can be prepared by dichloro-methyl-vinyl-silane and phenylmagnesium bromide. It is a kind of grignard reaction, and the yield is about 57%.
Uses of Benzene,(chloroethenylmethylsilyl)-: It can react with 1-phenylselanyl-indan-2-ol to produce methyl-phenyl-(1-phenylselanyl-indan-2-yloxy)-vinyl-silane. This reaction will need reagent Et3N and DMAP, and the menstruum toluene. The reaction time is 5 minutes with temperature of 20°C, and the yield is about 89%.
You should be cautious while dealing with this chemical. It may cause burns. Therefore, you had better take the following instructions: Wear suitable protective clothing, gloves and eye/face protection, and if in case of contacting with eyes, rinse immediately with plenty of water and seek medical advice; After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer); In case of accident or if you feel unwell, seek medical advice immediately (show label where possible).
Addtionally, the following datas could be converted into the molecular structure:
(1)SMILES: Cl[Si](\C=C)(c1ccccc1)C
(2)InChI: InChI=1/C9H11ClSi/c1-3-11(2,10)9-7-5-4-6-8-9/h3-8H,1H2,2H3
(3)InChIKey: GSXJAPJSIVGONK-UHFFFAOYAH