Products Categories
CAS No.: | 387-45-1 |
---|---|
Name: | 2-Chloro-6-fluorobenzaldehyde |
Article Data: | 24 |
Molecular Structure: | |
Formula: | C7H4ClFO |
Molecular Weight: | 158.56 |
Synonyms: | 2-Fluoro-6-chlorobenzaldehyde; |
EINECS: | 206-860-5 |
Density: | 1.352 g/cm3 |
Melting Point: | 32-35 °C(lit.) |
Boiling Point: | 203.8 °C at 760 mmHg |
Flash Point: | 77.1 °C |
Solubility: | Insoluble |
Appearance: | white to yellow solid |
Hazard Symbols: | Xi |
Risk Codes: | 36/37/38 |
Safety: | 26-36/37/39 |
PSA: | 17.07000 |
LogP: | 2.29160 |
What can I do for you?
Get Best Price
The IUPAC name of this chemical is 2-Chloro-6-fluorobenzaldehyde. With the CAS registry number 387-45-1 and EINECS registry number 206-860-5, it is also named as benzaldehyde, 2-chloro-6-fluoro-. In addition, the molecular formula is C7H4ClFO and the molecular weight is 158.56. It is a kind of white to yellow crystalline solid and should be stored in a cool and dry place. And it can be used as a pharmaceutical intermediate.
Physical properties about this chemical are: (1)ACD/LogP: 2.04; (2)ACD/LogD (pH 5.5): 2.04; (3)ACD/LogD (pH 7.4): 2.04; (4)ACD/BCF (pH 5.5): 20.75; (5)ACD/BCF (pH 7.4): 20.75; (6)ACD/KOC (pH 5.5): 305.01; (7)ACD/KOC (pH 7.4): 305.01; (8)#H bond acceptors: 1; (9)#Freely Rotating Bonds: 1; (10)Polar Surface Area: 17.07 Å2; (11)Index of Refraction: 1.559; (12)Molar Refractivity: 37.89 cm3; (13)Molar Volume: 117.2 cm3; (14)Polarizability: 15.02 ×10-24cm3; (15)Surface Tension: 40.2 dyne/cm; (16)Density: 1.352 g/cm3; (17)Flash Point: 77.1 °C; (18)Enthalpy of Vaporization: 44.01 kJ/mol; (19)Boiling Point: 203.8 °C at 760 mmHg; (20)Vapour Pressure: 0.272 mmHg at 25°C.
Preparation of 2-Chloro-6-fluorobenzaldehyde: it can be prepared by 2-chloro-6-fluorinetoluene and bromide in the presence of concentrated sulfuric acid. In addition, 2-chloro-6-fluorinetoluene also can react with CrO2Cl2 to give the product in the presence of carbon disulfide.
Uses of 2-Chloro-6-fluorobenzaldehyde: it can be used to get 2-chloro-6-fluoro-benzaldehyde-oxime. This reaction will need reagents NH2OH*HCl and silica gel. The reaction time is 3 minutes with microwave irradiation. And the yield is about 98%.
When you are using this chemical, please be cautious about it as the following:
It is irritating to eyes, respiratory system and skin. When you are using it, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
You can still convert the following datas into molecular structure:
(1)SMILES: O=Cc1c(F)cccc1Cl
(2)Std.InChI: InChI=1S/C7H4ClFO/c8-6-2-1-3-7(9)5(6)4-10/h1-4H
(3)Std.InChIKey: OACPOWYLLGHGCR-UHFFFAOYSA-N