Products Categories
CAS No.: | 78-62-6 |
---|---|
Name: | Diethoxydimethylsilane |
Article Data: | 61 |
Molecular Structure: | |
Formula: | C6H16O2Si |
Molecular Weight: | 148.277 |
Synonyms: | Dimethyl diethoxy silicane;Dimethylsilicondiethoxide; |
EINECS: | 201-127-6 |
Density: | 0.842 g/cm3 |
Melting Point: | -97 °C |
Boiling Point: | 114 °C at 760 mmHg |
Flash Point: | 11.7 °C |
Solubility: | may decompose in water |
Appearance: | Colorless clear liquid |
Hazard Symbols: | F, Xi |
Risk Codes: | 11-36/38 |
Safety: | 26-36-16 |
Transport Information: | UN 1993 3/PG 2 |
PSA: | 18.46000 |
LogP: | 1.76120 |
What can I do for you?
Get Best Price
Diethoxydimethylsilane, with the CAS registry number 78-62-6, is also named as Dimethyl diethoxy silicane. It belongs to the product categories of Aromatic Hydrocarbons (substituted) & Derivatives; Dialkoxysilanes; Functional Materials; Si (Classes of Silicon Compounds); Silane Coupling Agents; Silane Coupling Agents (Intermediates); Si-O Compounds; Alkoxy Silanes; Crosslinkers; Crosslinking Agents; Organosilicon compounds. Its EINECS number is 201-127-6. This chemical's molecular formula is C6H16O2Si and molecular weight is 148.28. What's more, its systematic name is Diethoxydimethylsilane. Its classification code is Skin / Eye Irritant. This chemical should be sealed and stored in a cool, ventilated and dry place. Moreover, it should be protected from oxides, heat and fire.
Physical properties of Diethoxydimethylsilane are: (1)ACD/LogP: 0.61; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 0.61; (4)ACD/LogD (pH 7.4): 0.61; (5)ACD/BCF (pH 5.5): 1.71; (6)ACD/BCF (pH 7.4): 1.71; (7)ACD/KOC (pH 5.5): 51.15; (8)ACD/KOC (pH 7.4): 51.15; (9)#H bond acceptors: 2; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 4; (12)Polar Surface Area: 18.46 Å2; (13)Index of Refraction: 1.393; (14)Molar Refractivity: 42.054 cm3; (15)Molar Volume: 176.038 cm3; (16)Polarizability: 16.671×10-24cm3; (17)Surface Tension: 19.4 dyne/cm; (18)Density: 0.842 g/cm3; (19)Flash Point: 11.667 °C; (20)Enthalpy of Vaporization: 33.788 kJ/mol; (21)Boiling Point: 113.999 °C at 760 mmHg; (22)Vapour Pressure: 24.0 mmHg at 25°C.
Preparation: this chemical can be prepared by dichloro-dimethyl-silane and ethanol at the temperature of 20 - 25 °C. This reaction will need reagent urea with the reaction time of 4 hours. The yield is about 70.3%.
Uses of Diethoxydimethylsilane: it can be used to produce 2,2-dimethyl-[1,3,6,2]trioxasilocane by heating. It will need reagent NaOCH3 and solvents dioxane, methanol. The yield is about 80%.
When you are using this chemical, please be cautious about it as the following:
This chemical is highly flammable, so you should keep it away from sources of ignition - No smoking. It is irritating to eyes and skin. In case of contact with eyes, you should rinse immediately with plenty of water and seek medical advice. When using it, you need wear suitable protective clothing.
You can still convert the following datas into molecular structure:
(1)SMILES: O(CC)[Si](OCC)(C)C
(2)Std. InChI: InChI=1S/C6H16O2Si/c1-5-7-9(3,4)8-6-2/h5-6H2,1-4H3
(3)Std. InChIKey: YYLGKUPAFFKGRQ-UHFFFAOYSA-N
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
rat | LC50 | inhalation | 20gm/m3/8H (20000mg/m3) | "Prehled Prumyslove Toxikologie; Organicke Latky," Marhold, J., Prague, Czechoslovakia, Avicenum, 1986Vol. -, Pg. 1226, 1986. | |
rat | LD50 | oral | 9280mg/kg (9280mg/kg) | "Prehled Prumyslove Toxikologie; Organicke Latky," Marhold, J., Prague, Czechoslovakia, Avicenum, 1986Vol. -, Pg. 1226, 1986. |