15751-45-8

Basic information

• Product Name: ytterbium
• Synonyms: Ytterbium, isotope ofmass 176
• CAS NO: 15751-45-8
• Molecular Formula: Yb
• Molecular Weight: 0
• Mol File: 15751-45-8.mol
• Article Data: 0

Chemical Properties

• Boiling Point: °Cat760mmHg
• Flash Point: °C
• Appearance: /
• Density: g/cm³
• CAS DataBase Reference: ytterbium(CAS DataBase Reference)
• NIST Chemistry Reference: ytterbium(15751-45-8)
• EPA Substance Registry System: ytterbium(15751-45-8)

Safety Data

• Hazardous Substances Data: 15751-45-8(Hazardous Substances Data)

Usage

InChI:InChI=1/Yb/i1+3

Related news

Calorimetric study of ytterbium (cas 15751-45-8) orthovanadate YbVO4 polycrystalline ceramics09/25/2019

The heat capacity of ytterbium orthovanadate was first measured by adiabatic calorimetry in the temperature range T = 12.28–344.06 K. No obvious anomalies were observed on the curve obtained. The values of standard thermodynamic functions in the temperature range T = 0–400 K were calculated. B...detailed

Near-infrared luminescent materials: From β-diketonate ytterbium (cas 15751-45-8) complexes to β[email protected] thin film09/24/2019

In view of the potential application of NIR luminescence in biology, a series of four new 3,5-Heptanedione (β-diketonate) ytterbium complexes, e.g. [Yb(L)3(H2O)2] (1), [Yb(L)3(2,2′-bpy)] (2), [Yb(L)3(dpq)] (3) and [Yb(L)3(dppz)] (4) have been designed and isolated. Crystal structures analysis ...detailed

Thermal shock behavior of mixed ytterbium (cas 15751-45-8) disilicates and ytterbium (cas 15751-45-8) monosilicates composite environmental barrier coatings09/10/2019

The thermal shock properties of mixed Yb2Si2O7 and Yb2SiO5 composite environmental barrier coating (EBC) topcoat, with various Yb2Si2O7-to-Yb2SiO5 ratios, are investigated between room temperature and 1500 °C. The results show that, with more Yb2Si2O7 introduced, the mixed Yb2Si2O7 and Yb2SiO5 ...detailed

ytterbium (cas 15751-45-8) silicide nanostructures prepared by pulsed laser ablation in oven: Structural and electrical characterization09/08/2019

Ytterbium silicide nanoobjects were synthetized using pulsed laser ablation in an oven at temperatures of 800 and 1000 °C. Ablation of divided target Si/Yb in a flow of Ar resulted in deposits which contained mostly ytterbium silicide nanowires, nanorods and nanoparticles. Single nanoparticles ...detailed

Research articlesFabrication, sintering, heat capacity, magnetic and magnetroresistivity properties of ytterbium (cas 15751-45-8) sulfides09/07/2019

The preparation, sintering and low-temperature physical properties of four kinds of ytterbium sulfides (η-Yb2S3, ε-Yb2S3, Yb3S4 and YbS) were systematically investigated. The suitable sintering processes were ensured for each ytterbium sulfide. SEM results suggested the sintered ytterbium sulf...detailed

Original articleDegradation of ytterbium (cas 15751-45-8) disilicate environmental barrier coatings in high temperature steam atmosphere09/05/2019

The use of Ceramic Matrix Composites (CMCs) in the hottest part of an aero engine promises great improvements in fuel efficiency by decreasing component weight and allowing higher gas inlet temperatures. However, an environmental barrier coating (EBC) is required to protect the CMC from the corr...detailed