|
1.
1.1
IDENTIFICATION
OF
THE
SUBSTANCE/MIXTURE
AND
OF
THE
COMPANY/UNDERTAKING
Product
identifiers
Product
name
Product
Number
Brand
CAS-No.
:
:
:
:
Copper(II)
acetate
hydrate
341746
Anonymous
66923-66-8
1.2
Relevant
identified
uses
of
the
substance
or
mixture
and
uses
advised
against
Identified
uses
:
Laboratory
chemicals,
Manufacture
of
substances 2.
2.1
2.2
HAZARDS
IDENTIFICATION
Classification
of
the
substance
or
mixture
Classification
according
to
Regulation
(EC)
No
1272/2008
[EU-GHS/CLP]
Acute
toxicity,
Oral
(Category
4)
Skin
irritation
(Category
2)
Eye
irritation
(Category
2)
Specific
target
organ
toxicity
-
single
exposure
(Category
3)
Acute
aquatic
toxicity
(Category
1)
Classification
according
to
EU
Directives
67/548/EEC
or
1999/45/EC
Harmful
if
swallowed.
Irritating
to
eyes,
respiratory
system
and
skin.
Very
toxic
to
aquatic
organisms,
may
cause
long-term
adverse
effects
in
the
aquatic
environment.
Label
elements
Labelling
according
Regulation
(EC)
No
1272/2008
[CLP]
Pictogram
Signal
word
Hazard
statement(s)
H302
H315
H319
H335
H400
Warning
Harmful
if
swallowed.
Causes
skin
irritation.
Causes
serious
eye
irritation.
May
cause
respiratory
irritation.
Very
toxic
to
aquatic
life.
Precautionary
statement(s)
P261
P273
P305
+
P351
+
P338
Supplemental
Hazard
Avoid
breathing
dust.
Avoid
release
to
the
environment.
IF
IN
EYES:
Rinse
cautiously
with
water
for
several
minutes.
Remove
contact
lenses,
if
present
and
easy
to
do.
Continue
rinsing.
none
Statements
According
to
European
Directive
67/548/EEC
as
amended.
Hazard
symbol(s)
R-phrase(s)
R22
R36/37/38
R50/53
Harmful
if
swallowed.
Irritating
to
eyes,
respiratory
system
and
skin.
Very
toxic
to
aquatic
organisms,
may
cause
long-term
adverse
effects
in
the
aquatic
environment.
S-phrase(s)
S26
S60
S61
In
case
of
contact
with
eyes,
rinse
immediately
with
plenty
of
water
and
seek
medical
advice.
This
material
and
its
container
must
be
disposed
of
as
hazardous
waste.
Avoid
release
to
the
environment.
Refer
to
special
instructions/
Safety
data
sheets.
2.3
3.
3.1
Other
hazards
-
none
COMPOSITION/INFORMATION
ON
INGREDIENTS
Substances
Formula
Molecular
Weight
Component
Copper
di(acetate)
:
:
C4H6CuO4
·
xH2O
181,63
g/mol
Concentration
CAS-No.
EC-No.
66923-66-8
205-553-3
-
4.
4.1
4.2
FIRST
AID
MEASURES
Description
of
first
aid
measures
General
advice
Consult
a
physician.
Show
this
safety
data
sheet
to
the
doctor
in
attendance.
If
inhaled
If
breathed
in,
move
person
into
fresh
air.
If
not
breathing,
give
artificial
respiration.
Consult
a
physician.
In
case
of
skin
contact
Wash
off
with
soap
and
plenty
of
water.
Consult
a
physician.
In
case
of
eye
contact
Rinse
thoroughly
with
plenty
of
water
for
at
least
15
minutes
and
consult
a
physician.
If
swallowed
Never
give
anything
by
mouth
to
an
unconscious
person.
Rinse
mouth
with
water.
Consult
a
physician.
Most
important
symptoms
and
effects,
both
acute
and
delayed
Symptoms
of
systemic
copper
poisoning
may
include:
capillary
damage,
headache,
cold
sweat,
weak
pulse,
and
kidney
and
liver
damage,
central
nervous
system
excitation
followed
by
depression,
jaundice,
convulsions,
paralysis,
and
coma.
Death
may
occur
from
shock
or
renal
failure.
Chronic
copper
poisoning
is
typified
by
hepatic
cirrhosis,
brain
damage
and
demyelination,
kidney
defects,
and
copper
deposition
in
the
cornea
as
exemplified
by
humans
with
Wilson's
disease.
It
has
also
been
reported
that
copper
poisoning
has
lead
to
hemolytic
anemia
and
accelerates
arteriosclerosis.,
To
the
best
of
our
knowledge,
the
chemical,
physical,
and
toxicological
properties
have
not
been
thoroughly
investigated.
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
Indication
of
any
immediate
medical
attention
and
special
treatment
needed
no
data
available
FIREFIGHTING
MEASURES
Extinguishing
media
Suitable
extinguishing
media
Use
water
spray,
alcohol-resistant
foam,
dry
chemical
or
carbon
dioxide.
Special
hazards
arising
from
the
substance
or
mixture
Carbon
oxides,
Copper
oxides
Advice
for
firefighters
Wear
self
contained
breathing
apparatus
for
fire
fighting
if
necessary.
Further
information
no
data
available
ACCIDENTAL
RELEASE
MEASURES
Personal
precautions,
protective
equipment
and
emergency
procedures
Use
personal
protective
equipment.
Avoid
dust
formation.
Avoid
breathing
vapors,
mist
or
gas.
Ensure
adequate
ventilation.
Evacuate
personnel
to
safe
areas.
Avoid
breathing
dust.
Environmental
precautions
Prevent
further
leakage
or
spillage
if
safe
to
do
so.
Do
not
let
product
enter
drains.
Discharge
into
the
environment
must
be
avoided.
Methods
and
materials
for
containment
and
cleaning
up
Pick
up
and
arrange
disposal
without
creating
dust.
Sweep
up
and
shovel.
Keep
in
suitable,
closed
containers
for
disposal.
Reference
to
other
sections
For
disposal
see
section
13.
HANDLING
AND
STORAGE
Precautions
for
safe
handling
Avoid
contact
with
skin
and
eyes.
Avoid
formation
of
dust
and
aerosols.
Provide
appropriate
exhaust
ventilation
at
places
where
dust
is
formed.
Conditions
for
safe
storage,
including
any
incompatibilities
Store
in
cool
place.
Keep
container
tightly
closed
in
a
dry
and
well-ventilated
place.
Hygroscopic.
Store
under
inert
gas.
Specific
end
uses
no
data
available
EXPOSURE
CONTROLS/PERSONAL
PROTECTION
Control
parameters
Components
with
workplace
control
parameters
Exposure
controls
Appropriate
engineering
controls
Handle
in
accordance
with
good
industrial
hygiene
and
safety
practice.
Wash
hands
before
breaks
and
at
the
end
of
workday.
Personal
protective
equipment
Eye/face
protection
Safety
glasses
with
side-shields
conforming
to
EN166
Use
equipment
for
eye
protection
tested
and
approved
under
appropriate
government
standards
such
as
NIOSH
(US)
or
EN
166(EU).
Skin
protection
Handle
with
gloves.
Gloves
must
be
inspected
prior
to
use.
Use
proper
glove
removal
technique
(without
touching
glove's
outer
surface)
to
avoid
skin
contact
with
this
product.
Dispose
of
contaminated
gloves
after
use
in
accordance
with
applicable
laws
and
good
laboratory
practices.
Wash
and
dry
hands.
The
selected
protective
gloves
have
to
satisfy
the
specifications
of
EU
Directive
89/686/EEC
and
the
standard
EN
374
derived
from
it.
Body
Protection
Complete
suit
protecting
against
chemicals,
The
type
of
protective
equipment
must
be
selected
according
to
the
concentration
and
amount
of
the
dangerous
substance
at
the
specific
workplace.
Respiratory
protection
For
nuisance
exposures
use
type
P95
(US)
or
type
P1
(EU
EN
143)
particle
respirator.For
higher
level
protection
use
type
OV/AG/P99
(US)
or
type
ABEK-P2
(EU
EN
143)
respirator
cartridges.
Use
respirators
and
components
tested
and
approved
under
appropriate
government
standards
such
as
NIOSH
(US)
or
CEN
(EU).
9.
9.1
PHYSICAL
AND
CHEMICAL
PROPERTIES
Information
on
basic
physical
and
chemical
properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour
Threshold
pH
Melting
point/freezing
point
Initial
boiling
point
and
boiling
range
Flash
point
Evaporation
rate
Form:
solid
no
data
available
no
data
available
no
data
available
no
data
available
no
data
available
no
data
available
no
data
available
i)
Flammability
(solid,
gas)
no
data
available
j)
k)
l)
Upper/lower
flammability
or
explosive
limits
Vapour
pressure
Vapour
density
no
data
available
no
data
available
no
data
available
m)
Relative
density
no
data
available
n)
o)
p)
q)
r)
s)
t)
Water
solubility
Partition
coefficient:
n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive
properties
Oxidizing
properties
no
data
available
no
data
available
no
data
available
no
data
available
no
data
available
no
data
available
no
data
available
9.2
Other
safety
information
no
data
available
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
STABILITY
AND
REACTIVITY
Reactivity
no
data
available
Chemical
stability
no
data
available
Possibility
of
hazardous
reactions
no
data
available
Conditions
to
avoid
Avoid
moisture.
Incompatible
materials
Strong
oxidizing
agents,
Strong
acids
Hazardous
decomposition
products
Other
decomposition
products
-
no
data
available
TOXICOLOGICAL
INFORMATION
Information
on
toxicological
effects
Acute
toxicity
no
data
available
Skin
corrosion/irritation
no
data
available
Serious
eye
damage/eye
irritation
no
data
available
Respiratory
or
skin
sensitization
no
data
available
Germ
cell
mutagenicity
no
data
available
Carcinogenicity
IARC:
No
component
of
this
product
present
at
levels
greater
than
or
equal
to
0.1%
is
identified
as
probable,
possible
or
confirmed
human
carcinogen
by
IARC.
Reproductive
toxicity
no
data
available
Specific
target
organ
toxicity
-
single
exposure
Inhalation
-
May
cause
respiratory
irritation.
Specific
target
organ
toxicity
-
repeated
exposure
no
data
available
Aspiration
hazard
no
data
available
Potential
health
effects
Inhalation
Ingestion
Skin
Eyes
May
be
harmful
if
inhaled.
Causes
respiratory
tract
irritation.
Harmful
if
swallowed.
May
be
harmful
if
absorbed
through
skin.
Causes
skin
irritation.
Causes
serious
eye
irritation.
Signs
and
Symptoms
of
Exposure
Symptoms
of
systemic
copper
poisoning
may
include:
capillary
damage,
headache,
cold
sweat,
weak
pulse,
and
kidney
and
liver
damage,
central
nervous
system
excitation
followed
by
depression,
jaundice,
convulsions,
paralysis,
and
coma.
Death
may
occur
from
shock
or
renal
failure.
Chronic
copper
poisoning
is
typified
by
hepatic
cirrhosis,
brain
damage
and
demyelination,
kidney
defects,
and
copper
deposition
in
the
cornea
as
exemplified
by
humans
with
Wilson's
disease.
It
has
also
been
reported
that
copper
poisoning
has
lead
to
hemolytic
anemia
and
accelerates
arteriosclerosis.,
To
the
best
of
our
knowledge,
the
chemical,
physical,
and
toxicological
properties
have
not
been
thoroughly
investigated.
Additional
Information
RTECS:
Not
available
12.
12.1
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
ECOLOGICAL
INFORMATION
Toxicity
no
data
available
Persistence
and
degradability
no
data
available
Bioaccumulative
potential
no
data
available
Mobility
in
soil
no
data
available
Results
of
PBT
and
vPvB
assessment
no
data
available
Other
adverse
effects
Very
toxic
to
aquatic
life.
DISPOSAL
CONSIDERATIONS
Waste
treatment
methods
Product
Offer
surplus
and
non-recyclable
solutions
to
a
licensed
disposal
company.
Dissolve
or
mix
the
material
with
a
combustible
solvent
and
burn
in
a
chemical
incinerator
equipped
with
an
afterburner
and
scrubber.
Contaminated
packaging
Dispose
of
as
unused
product.
TRANSPORT
INFORMATION
UN
number
14.2
ADR/RID:
3077
UN
proper
shipping
name
IMDG:
3077
IATA:
3077
ADR/RID:
IMDG:
IATA:
ENVIRONMENTALLY
HAZARDOUS
SUBSTANCE,
SOLID,
N.O.S.
(Copper
di(acetate))
ENVIRONMENTALLY
HAZARDOUS
SUBSTANCE,
SOLID,
N.O.S.
(Copper
di(acetate))
Environmentally
hazardous
substance,
solid,
n.o.s.
(Copper
di(acetate))
14.3
Transport
hazard
class(es)
14.4
14.5
14.6
ADR/RID:
9
Packaging
group
ADR/RID:
III
Environmental
hazards
ADR/RID:
yes
Special
precautions
for
user
IMDG:
9
IMDG:
III
IMDG
Marine
pollutant:
yes
IATA:
9
IATA:
III
IATA:
yes
Further
information
EHS-Mark
required
(ADR
2.2.9.1.10,
IMDG
code
2.10.3)
for
single
packagings
and
combination
packagings
containing
inner
packagings
with
Dangerous
Goods
>
5L
for
liquids
or
>
5kg
for
solids.
15.
15.1
REGULATORY
INFORMATION
This
safety
datasheet
complies
with
the
requirements
of
Regulation
(EC)
No.
1907/2006.
Safety,
health
and
environmental
regulations/legislation
specific
for
the
substance
or
mixture
no
data
available
15.2
16.
Chemical
Safety
Assessment
no
data
available
OTHER
INFORMATION
Further
information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
| 
COPPER(II) ACETATE MONOHYDRATE
China (Mainland)] 
Assessed
Assessed
Assessed
Premium
Premium
Premium
Premium
Premium
Premium
Premium