USD $6.00-9.00 / Gram
USD $800.00-1,200.00 / Metric Ton
USD $0.80-1.00 / Kilogram
USD $0.80-0.90 / Metric Ton
USD $955.00-960.00 / Metric Ton
USD $1,030.00-1,050.00 / Metric Ton
injection grade
item | test condition | test method | value | unit |
mfr | 190°c/2.16kg | astm d-1238 | 20 | g/10min |
density | --- | astm d-792 | 0.954 | g/cm3 |
tensile strength at yiled | --- | astm d-638 | 28 | mpa |
elongation at break | --- | astm d-638 | 250 | % |
impact tensile strength | --- | astm d-1822 | 42 | kj/m2 |
escr | astm d-1693 | 3 | --- | |
vacit | --- | astm d-1525 | 127 | °c |
for extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
property
unit |
typical value |
|
mass density | g/cm 3 | 0.941-0.959 |
melt flow rate(190 centidegree /2.16kg) | g/10min | ≤1.0 |
tensile yield strength | mpa | ≥19.0 |
flexural modulus | mpa | ≥965 |
elongation@ break | % | ≥400 |
impact embrittlement temperature | centidegree | max -118 |
dielectric constant | 100khz | 2.32 |
1mhz | 2.31 | |
loss tangent | 100khz | max 0.0001 |
1mhz | max 0.0001 | |