Absorption of Cr(VI) onto amino-modified titanate nanotubes using 2-bromoethylamine (cas 107-09-5) hydrobromide through SN2 reaction

Add time:08/18/2019    Source:sciencedirect.com

Unlike the complex reaction of grafting amino groups using harmful organic solvents, we proposed an environmental friendly method for effective amino grafting on titanate nanotubes (TNTs) with 2-bromoethylamine (cas 107-09-5) hydrobromide (2-Bh) through a two-step SN2 reaction in pure water solution. The amino-modified titanate nanotubes (TNTs-RNH2) were characterized by Transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Under optimal conditions, the molar ratio of NaOH/2-Bh was 1.2 for step 1 and 1.3 for step 2 with corresponding reaction time of 12 h and 24 h, respectively. The adsorption isotherm of Cr(VI) onto TNTs-RNH2 well fits Langmuir model with maximal adsorption capacity of 69.1 mg/g, which is almost five times larger than that of fresh TNTs. The slight decrease in adsorption capacity with NO3- concentration was attributed to competition from ions, suppression of electric double layer and changes of Cr(VI) speciation. The wide adsorption pH range was due to much larger point of zero charge (8.2) and electrostatic attraction between positively charged TNTs-RNH2 and Cr(VI) with different speciations. The products could be well reused due to simple desorption at pH 10 with about 20% loss of the adsorption capacity after three recycles without any regeneration treatment.

We also recommend Trading Suppliers and Manufacturers of 2-bromoethylamine (cas 107-09-5). Pls Click Website Link as below: cas 107-09-5 suppliers

Prev:Automated synthesis of radiochemically pure 11C-labeled ethyl, propyl and butyl iodides
Next:Synthesis, characterization, lipophilicity and cytotoxic properties of novel bis(carboxylato)oxalatobis(1-Propylamine (cas 107-10-8))platinum(IV) complexes)