- Characterization of aroma compounds of Chinese "Wuliangye" and "Jiannanchun" liquors by aroma extract dilution analysis
-
Aroma compounds in Chinese "Wuliangye" liquor were identified by gas chromatography-olfactometry (GC-O) after fractionation. A total of 132 odorants were detected by GC-O in Wuliangye liquor on DB-wax and DB-5 columns. Of these, 126 aromas were identified by GC-mass spectrometry (MS). Aroma extract dilution analysis (AEDA) was further employed to identify the most important aroma compounds in "Wuliangye" and "Jiannanchun" liquors. The results showed that esters could be the most important class, especially ethyl esters. Various alcohols, aldehydes, acetals, alkylpyrazines, furan derivatives, lactones, and sulfur-containing and phenolic compounds were also found to be important. On the basis of flavor dilution (FD) values, the most important aroma compounds in Wuliangye and Jiannanchun liquors could be ethyl butanoate, ethyl pentanoate, ethyl hexanoate, ethyl octanoate, butyl hexanoate, ethyl 3-methylbutanoate, hexanoic acid, and 1,1-diethoxy-3-methylbutane (FD ≥ 1024). These compounds contributed to fruity, floral, and apple- and pineapple-like aromas with the exception of hexanoic acid, which imparts a sweaty note. Several pyrazines, including 2,5-dimethyl-3-ethylpyrazine, 2-ethyl-6-methylpyrazine, 2,6-dimethylpyrazine, 2,3,5-tri-methylpyrazine, and 3,5-dimethyl-2-pentylpyrazine, were identified in these two liquors. Although further quantitative analysis is required, it seems that most of these pyrazine compounds had higher FD values in Wuliangye than in Jiannanchun liquor, thus imparting stronger nutty, baked, and roasted notes in Wuliangye liquor.
- Fan, Wenlai,Qian, Michael C.
-
-
Read Online
- Aldehyde effect and ligand discovery in Ru-catalyzed dehydrogenative cross-coupling of alcohols to esters
-
The presence of different aldehydes is found to have a significant influence on the catalytic performance when using PN(H)P type ligands for dehydrogenation of alcohols. Accordingly, hybrid multi-dentate ligands were discovered based on an oxygen-transfer alkylation of PNP ligands by aldehydes. The relevant Ru-PNN(PO) system provided the desired unsymmetrical esters in good yields via acceptorless dehydrogenation of alcohols. Hydrogen bonding interactions between the phosphine oxide moieties and alcohol substrates likely assisted the observed high chemoselectivity.
- Jiang, Xiaolin,Zhang, Jiahui,Zhao, Dongmei,Li, Yuehui
-
p. 2797 - 2800
(2019/03/27)
-
- Efficient Enzymatic Preparation of Flavor Esters in Water
-
A straightforward biocatalytic method for the enzymatic preparation of different flavor esters starting from primary alcohols (e.g., isoamyl, n-hexyl, geranyl, cinnamyl, 2-phenethyl, and benzyl alcohols) and naturally available ethyl esters (e.g., formate, acetate, propionate, and butyrate) was developed. The biotransformations are catalyzed by an acyltransferase from Mycobacterium smegmatis (MsAcT) and proceeded with excellent yields (80-97%) and short reaction times (30-120 min), even when high substrate concentrations (up to 0.5 M) were used. This enzymatic strategy represents an efficient alternative to the application of lipases in organic solvents and a significant improvement compared with already known methods in terms of reduced use of organic solvents, paving the way to sustainable and efficient preparation of natural flavoring agents.
- Perdomo, Igor Chiarelli,Gianolio, Stefania,Pinto, Andrea,Romano, Diego,Contente, Martina Letizia,Paradisi, Francesca,Molinari, Francesco
-
p. 6517 - 6522
(2019/06/20)
-
- Development of triazine-based esterifying reagents containing pyridines as a nucleophilic catalyst
-
We have developed new triazine-based esterifying reagents comprising pyridines that can act as a nucleophilic catalyst. 1-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-3,5-lutidinium chloride (DMT-3,5-LUT) was found to exhibit a superior reactivity for the dehydrating condensation reaction between carboxylic acids and alcohols. The reaction of DMT-3,5-LUT with carboxylic acids produces intermediacy of acyloxytriazines, which is known to exhibit moderate reactivity toward alcohols, with concomitant liberation of 3,5-lutidine. The subsequent chemical transformation of the acyloxytriazines and alcohols into esters can be accelerated by the action of 3,5-lutidine as a nucleophilic catalyst. The detailed reaction mechanism revealed by a time-course analysis of the reactions is also discussed.
- Yamada, Kohei,Liu, Jie,Kunishima, Munetaka
-
supporting information
p. 6569 - 6575
(2018/09/25)
-
- Efficient O-Acylation of Alcohols and Phenol Using Cp2TiCl as a Reaction Promoter
-
A method has been developed for the conversion of primary, secondary, and tertiary alcohols, and phenol, into the corresponding esters at room temperature. The method uses a titanium(III) species generated from a substoichiometric amount of titanocene dichloride together with manganese(0) as a reductant, as well as methylene diiodide. It involves a transesterification from an ethyl ester, or a reaction with an acyl chloride. A radical mechanism is proposed for these transformations.
- Durán-Pe?a, María Jesús,Botubol-Ares, José Manuel,Hanson, James R.,Hernández-Galán, Rosario,Collado, Isidro G.
-
supporting information
p. 3584 - 3591
(2016/07/28)
-
- Solvent stability study with thermodynamic analysis and superior biocatalytic activity of Burkholderia cepacia lipase immobilized on biocompatible hybrid matrix of poly(vinyl alcohol) and hypromellose
-
In the present study, we have synthesized a biocompatible hybrid carrier of hypromellose (HY) and poly(vinyl alcohol) (PVA) for immobilization of Burkholderia cepacia lipase (BCL). The immobilized biocatalyst HY:-PVA:BCL was subjected to determination of half-life time (τ) and deactivation rate constant (KD) in various organic solvents. Biocatalyst showed higher τ-value in a nonpolar solvent like cyclohexane (822 h) as compared to that of a polar solvent such as acetone (347 h), which signifies better compatibility of biocatalyst in the nonpolar solvents. Furthermore, the KD-value was found to be less in cyclohexane (0.843 × 10-3) as compared to acetone (1.997 × 10-3), indicating better stability in the nonpolar solvents. Immobilized-BCL (35 mg) was sufficient to achieve 99% conversion of phenethyl butyrate (natural constituent of essential oils and has wide industrial applications) using phenethyl alcohol (2 mmol) and vinyl butyrate (6 mmol) at 44 °C in 3 h. The activation energy (Ea) was found to be lower for immobilized-BCL than crude-BCL, indicating better catalytic e fficiency of immobilized lipase BCL. The immobilized-BCL reported 6-fold superior biocatalytic activity and 8 times recyclability as compared to crude-BCL. Improved catalytic activity of immobilized enzyme in nonpolar media was also supported by thermodynamic activation parameters such as enthalpy (ΔH?), entropy (ΔS?) and Gibb 's free energy (ΔG?) study, which showed that phenethyl butyrate synthesis catalyzed by immobilized-BCL was feasible as compared to crude-BCL. The present work explains a thermodynamic investigation and superior biocatalytic activity for phenethyl butyrate synthesis using biocompatible immobilized HY:PVA:BCL in nonaqueous media for the first time. (Graph Presented).
- Badgujar, Kirtikumar C.,Bhanage, Bhalchandra M.
-
p. 14808 - 14819
(2015/02/19)
-
- Solvent-free transesterification in a ball-mill over alumina surface
-
An efficient procedure for transesterification has been developed in a ball-mill in the absence of any solvent, acid/base or metal catalyst. A variety of methyl, ethyl, allyl esters have been transesterified to higher benzyl and other esters in high yields by this procedure.
- Chatterjee, Tanmay,Saha, Debasree,Ranu, Brindaban C.
-
experimental part
p. 4142 - 4144
(2012/08/28)
-
- Iron(III) tosylate catalyzed acylation of alcohols, phenols, and aldehydes
-
Iron(III) p-toluenesulfonate (tosylate) is an efficient catalyst for acetylation of alcohols, phenols, and aldehydes. The acetylation of 1° and 2° alcohols, diols, and phenols proceeded smoothly with 2.0 mol % of catalyst. However, the reaction worked well with only a few 3° alcohols. The methodology was also applicable to the synthesis of a few benzoate esters but required the use of 5.0 mol % catalyst. Aldehydes could also be converted into the corresponding 1,1-diesters (acylals) under the reaction conditions. Iron(III) tosylate is an inexpensive, and easy to handle, commercially available catalyst.
- Baldwin, Neil J.,Nord, Anna N.,O'Donnell, Brendan D.,Mohan, Ram S.
-
p. 6946 - 6949
(2013/01/15)
-
- Transesterification catalyzed by iron(III) β-diketonate species
-
A practical and clean protocol for transesterification catalyzed by a 5 mol % cheap, non-toxic and moisture stable Fe(acac)3 or other iron(III) β-diketonate species in solvent, such as heptane under azeotropic condition is developed. A remarkable rate enhancement was observed upon the addition of 5 mol % of an inorganic base, such as Na2CO3, which suggests that faster formation of a dimeric μ-alkoxy-bridged iron(III) species under alkaline conditions facilitates catalytic turnover. This system provides smooth transesterification over a wide range of structurally diverse esters and alcohols without disturbing functional groups. In addition, the use of iron β-diketonate complexes as catalysts is more environmentally friendly, safer, and economical than other transition-metal catalysts. Preliminary mechanistic studies indicate that the active catalyst is likely a dimeric μ-alkoxy-bridged iron(III) species, as determined by X-ray crystallography of [Fe(dbm)2(O-n-Bu)]2 derived from the alcoholysis of Fe(dbm)3 under alkaline conditions.
- Weng, Shiue-Shien,Ke, Chih-Shueh,Chen, Fong-Kuang,Lyu, You-Fu,Lin, Guan-Ying
-
experimental part
p. 1640 - 1648
(2011/04/17)
-
- Synthesis of aromatic alcohols and their alkanoic acid esters
-
The reaction of benzene with ethylene and propylene oxides in a helium atmosphere with aluminum chloride as a catalyst and the esterification of the resulting alcohols with saturated monocarboxylic acids in the presence of the heterogeneous catalyst KU-2-8 were studied. Pleiades Publishing, Inc., 2006.
- Mamedov
-
p. 408 - 410
(2008/02/03)
-
- Nucleophilic acyl substitutions of anhydrides with protic nucleophiles catalyzed by amphoteric, oxomolybdenum species
-
(Chemical Equation Presented) Among six different group VIb oxometallic species examined, dioxomolybdenum dichloride and oxomolybdenum tetrachloride were the most efficient catalysts to facilitate nucleophilic acyl substitution (NAS) of anhydrides with a myriad array of alcohols, amines, and thiols in high yields and high chemoselectivity. In contrast to the well-recognized redox chemical behaviors associated with oxomolybdenum(VI) species, the catalytic NAS was unprecedented and tolerates virtually all kinds of functional groups. By using benzoic anhydride as a mediator for in situ generation of an incipient mixed anhydride-MoO2Cl2 adduct with a given functional alkanoic acid, one can achieve oleate, dipeptide, diphenylmethyl, N-Fmoc-α-amino, pyruvic, and tert-butylthio ester, N-tert-butylamide, and trityl methacrylate syntheses with appropriate protic nucleophiles. The amphoteric character of the Mo=O unit in oxomolybdenum chlorides was found to be responsible for the catalytic NAS profile as supported by a control NAS reaction of using an authentic adduct-MoOCl2(O2-CBu t)2 between pivalic anhydride and MoO2Cl 2 as the catalyst.
- Chen, Chien-Tien,Kuo, Jen-Huang,Pawar, Vijay D.,Munot, Yogesh S.,Weng, Shieu-Shien,Ku, Cheng-Hsiu,Liu, Cheng-Yuan
-
p. 1188 - 1197
(2007/10/03)
-