13031-45-3

The palladium-catalyzed C?H oxidation of simple arenes is an attractive strategy to obtain phenols, which have many applications in the fine chemicals industry. Although some advances have been made in this research area, low reactivity and selectivity are, in general, observed. This report describes a new catalytic system for the efficient C?H acetoxylation of simple arenes based on Pd(OAc)2 and a pyridinecarboxylic acid ligand.

A strategy for desilylative acetoxylation of (trimethylsilyl)arenes has been developed in which (trimethylsilyl)arenes are converted into acetoxyarenes. The direct acetoxylation is performed in the presence of 5 mol % of Pd(OAc)2 and PhI(OCOCF3)2 (1.5 equiv) in AcOH at 80°C for 17 h. The acetoxyarenes are obtained in good to high yields (67-98%). The synthetic utility is demonstrated with a one-pot transformation of (trimethylsilyl)arenes to phenols by successive acetoxylation and hydrolysis. Furthermore, desilylative acyloxylation of 2-(trimethylsilyl)naphthalene using several carboxylic acids has been conducted.

Less is more: The rational optimization and general applicability of the catalytic system Pd(OAc)2/pyridine is described (see scheme). The catalyst shows excellent reactivity in the C-H oxygenation of simple aromatic substrates. The Pd/pyridine ratio is critical as the use of one equivalent of pyridine per Pd center leads to dramatic enhancements in both reactivity and site selectivity in comparison to Pd(OAc)2 alone.

Air-stable titanocene bis(perfluorooctanesulfonate) [Cp2Ti(OSO2C8F17)2] that shows high Lewis acidity was prepared from Cp2TiCl2 and AgOSO2C8F17. The compound was characterized by different techniques, and examined as a catalyst for acylation reactions. It was found that using equimolar acetic anhydride as acetylating agent and under solvent-free condition, Cp2Ti(OSO2C8F17)2 exhibits high activity and selectivity in the acetylation of various alcohols, phenols, thiols, and amines. Also, good catalytic efficiency is observed in the acylation of 2-phenylethanol across various acylating reagents. The catalyst can be reused without loss of activity in a test of ten cycles. The Cp2Ti(OSO2C8F17)2 catalyst affords a simple, efficient and general method for the acylation of alcohols, phenols, thiols, and amines.

An effective one-step sample preparation methodology for the determination of multiclass preservatives in cosmetics has been developed, applying, for the first time to this kind of matrix, pressurized liquid extraction (PLE) and a very simple, cheap, and fast derivatization procedure: acetylation with acetic anhydride and pyridine. A multifactorial experimental design has been used to evaluate and optimize the main experimental parameters potentially affecting the extraction process. In the final conditions the sample was mixed with Florisil as the dispersing sorbent and extracted with ethyl acetate for 15 min at 120 °C. One of the main goals of this work was to demonstrate the possibility of carrying out direct cosmetic preservative acetylation by simply adding the derivatization reagents into the PLE cell. The extract was then analyzed by GC/MS without any further cleanup or concentration step. The accuracy, precision, linearity, and detection limits (LODs) were evaluated to assess the performance of the proposed method. Quantitative recoveries were obtained, and relative standard deviation values were lower than 10% in all cases. The obtained LODs ranged from 0.000004% to 0.0001% (w/w), values far below the established restrictions in the European Cosmetics Regulation, making this multicomponent analytical method suitable for routine control. Finally, several cosmetic products such as moisturizing and antiwrinkle creams and lotions, hand creams, sunscreen and after-sun creams, baby lotions, and hair care products were analyzed. All the samples contained several of the target cosmetic ingredients, in some cases at quite high concentrations, although the actual European Cosmetics Regulation was fulfilled in all cases.

Cationic catalysts in HD: Palladium(II) and platinum(II) complexes of pyridinium-substituted bipyridine ligands are highly active and stable catalysts for H/D exchange and oxidation of aromatic C-H bonds (TONs up to 3200, TOFs up to 0.1 s-1; se

Compounds of formula (I), wherein R1, R2, R3, Ra and E are are defined within, and pharmaceutically acceptable salts, solvates, hydrates and N-oxides thereof having utility in the treatment of disorders mediated by cathepsin S.

Diacylhydrazine derivatives have been identified as one of the most important insect growth regulators. A variety of diacylhydrazine derivatives were designed and synthesized in recent years due to their unique action mechanism, simple structure, and environmental benign character. This paper describes the molecular design, synthesis, and insecticidal activities of a series of chromanone and chromone analogues of diacylhydrazine derivatives. The preliminary bioassay showed that some of the chromanone analogues exhibited good insecticidal activity against Mythima separata at the dosage of 500 mg L-1. The present work demonstrated that replacement of the chroman ring of ANS-118, a commercial insecticide, with chromanone moiety could result in new compounds with high potent insecticidal activity.

The reaction between carboxylic acids (RCOOH) and dialkyl dicarbonates [(R1OCO)2O], in the presence of a weak Lewis acid such as magnesium chloride and the corresponding alcohol (R1OH) as the solvent, leads to the esters RCOOR1 in excellent yields. The mechanism involves a double addition of the acid to the dicarbonate, affording a carboxylic anhydride [(RCO)2O], R1OH and carbon dioxide. The esters arise from the attack of the alcohols on the anhydrides. Exploiting the lesser reactivity of tert-butyl alcohol in comparison with other alcohols, a clean synthesis of both carboxylic anhydrides and esters has been set up. In the former reaction, an acid/Boc2O molecular ratio of 2:1 leads to the anhydride in good to excellent yields, depending on the stability of the resulting anhydride to the usual workup conditions. In the latter reaction, stoichiometric mixtures of the acid and Boc2O are allowed to react with a twofold excess of a primary alcohol, secondary alcohol or phenol (R 2OH) to give the corresponding esters (RCOOR2). Purification of the products is particularly easy since all byproducts are volatile or water soluble. A very easy chromatography is required only in the case of nonvolatile alcohols. A broad variety of sensitive functional groups is tolerated on both the acid and the alcohol, in particular a high chemoselectivity is observed. In fact, no transesterification processes occur with the acid-sensitive acetoxy group and methyl esters. Georg Thieme Verlag Stuttgart.

Compounds of the formula (I) where R1 is C1-C4 straight or branched alkyl, optionally substituted with up to three substituents selected from halo and hydroxy; R2 is halo, hydroxy, methyloxy, or C1-C2 alkyl, which alkyl is optionally substituted with up to three halogens or an hydroxy or a methyloxy; D is - C3-C7 alkylene-, thereby defining a cycloalkyl ring; E is -C(=O)-, -S(=O)m-, -NRdS(=O)m-, -NRaC(=O)-, -OC(=O)-, R3 is an optionally substituted carbocyclic or heterocyclic ring R10 is H, ORc, SRc or together with the gem H is =O or (ORc)2; Ra is independently selected from H, C1-C4 alkyl; have utility in the inhibition of cathepsin S and are thus useful pharmaceuticals against disorders such as autoimmune disorders and chronic pain.

Magnesium bistrifluoromethanesulfonimide catalyzed the acetylation of phenols, alcohols, and thiols under solvent-free conditions at room temperature and in short times. Electron-deficient and sterically hindered phenols provided excellent yields. The catalyst was found to be general for acylation with other anhydrides, such as propionic, isobutyric, pivalic, chloroacetic, and benzoic anhydrides. The rate of acylation was influenced by the electronic and steric factors associated with the anhydride. The reaction with less electrophilic anhydrides (e.g., chloroacetic and benzoic anhydrides) required higher temperature (～80 °C). Chemoselective acetylation, pivalation, and benzoylation took place with acid-sensitive alcohols without any competitive dehydration/rearrangement.

Alkali and alkaline earth metal perchlorates exhibit electrostatic catalysis in the activation of anhydrides for the acylation reaction. Perchlorates with higher values of the charge-size function of the metal ion exhibit better catalytic activity following the order Mg(ClO4) 2>Ba(ClO4)2>LiClO4. Acylation of structurally diverse phenols, thiols, alcohols, and amines have been carried out with stoichiometric amounts of anhydride at room temperature under solvent free conditions in the presence of catalytic amount of Mg(ClO4) 2. Sterically hindered and electron deficient phenols are efficiently acylated. Acylation with sterically hindered anhydrides such as iso-butyric, pivalic, and benzoic anhydrides are carried out with phenols and alcohols in excellent yields. Acid-sensitive alcohols are acylated in excellent yields without any competitive side reactions.

A new method for efficient and chemoselective esterification of carboxylic acids in CsF-Celite/alkyl halide/CH3CN reaction system is described.

Candida cylindracea lipase (CCL) and porcine pancreatic lipase (PPL) have been used for deacetylation of peracetates of methyl and ethyl esters of six different polyphenolic acids in organic solvents. Exclusive de-esterification of the ester groups derived from the phenolic hydroxy and aliphatic acid over the ester group of the aromatic acid and aliphatic alcohol has been achieved affording the corresponding esters of phenolic acids in as high yields as 90-97%. The results have been corroborated with the mechanism of lipase action.

The second-order rate constants have been measured for the reaction of substituted phenolate ions with 2,4-dinitrophenyl acetate, 2,4-dinitrophenyl 4-methoxy-2,6-dimethylbenzoate and acetic anhydride in aqueous solution at 25 deg C.The data are over a wide range of phenolate ion basicity and obey good Broensted equations which have βnuc values of, respectively, 0.57 +/- 0.03, 0.15 +/- 0.07 and 0.59 +/- 0.05.The principal conclusion of this work is that the identity reaction of 2,4-dinitrophenolate ion with 2,4-dinitrophenyl 4-methoxy-2,6-dimethylbenzoate has anopen transition state, namely one with very weak bonds to entering and departing ligands.The transition state possesses a Kreevoy tightness parameter (τ) of 0.18.The open transition state arises from the stabilising effect of the acyl group substituents on the benzoylium ion and their destabilising effect on the putative tetrahedral intermediate as well as the weak basicities of the nucleophile and nucleofuge.This is the first example of an open transition state in an acyl group transfer which does not require the assistance of a negatively charged internal nucleophile.The data for 2,4-dinitrophenyl acetate may be employed to calculate an identity rate constant (kii) for the reaction of 2,4-dinitrophenolate ion with the ester.This data may be fitted to a theoretical Lewis-Kreevoy plot (log kii vs. pKi) possessing both positive and negative values of βii (slope of the line).Microscopic medium effects place a limit to the accuracy of predictions of rate constants, including kii, from linear free energy relationships.