- Unexpected phenol production from arylboronic acids under palladium-free conditions; Organocatalyzed air oxidation
-
An intriguing class of quinones that efficiently catalyze the air oxidation (overall hydroxylation) of arylboronic acids to the corresponding phenol is reported. Autocatalysis in the parent system is particularly efficient and leads to rapid, quantitative synthesis of quinones such as 4 from boronic acid 1 at room temperature using air as stoichiometric oxidant. The efficiency results from a balance between two-stage conjugate addition and migration with each step driven by aromatization of a naphthalene fragment.
- Cammidge, Andrew N.,Goddard, Victoria H. M.,Schubert, Christopher P. J.,Gopee, Hemant,Hughes, David L.,Gonzalez-Lucas, Daniel
-
-
Read Online
- Highly recyclable Ti0.97Ni0.03O1.97catalyst coated on cordierite monolith for efficient transformation of arylboronic acids to phenols and reduction of 4-nitrophenol
-
A stable Ni2+substituted TiO2catalyst (Ti0.97Ni0.03O1.97) has been synthesized by a solution combustion method with an average crystallite size of 7.5 nm. Ti1?xNixO2?x(x= 0.01-0.06) crystallizes in the TiO2anatase structure with Ni2+substituted in Ti4+ion sites and Ni taking a nearly square planar geometry. This catalyst is found to be highly active in the transformation of diverse arylboronic acids to the corresponding phenols. The catalyst coated cordierite monolith can even be recycled for up to 20 cycles with a cumulative TOF of 1.8 × 105h?1. In scale-up reactions, various phenols are synthesized by employing a single cordierite monolith. It also shows high performance in the reduction of 4-nitrophenol.
- Hegde, M. S.,Prasanna,Usha, K. M.
-
supporting information
p. 14223 - 14234
(2021/10/25)
-
- Catalyst-free rapid conversion of arylboronic acids to phenols under green condition
-
A catalyst-free and solvent-free method for the oxidative hydroxylation of aryl boronic acids to corresponding phenols with hydrogen peroxide as the oxidizing agent was developed. The reactions could be performed under green condition at room temperature within very short reaction time. 99% yield of phenol could be achieved in only 1 min. A series of different arenes substituted aryl boronic acids were further carried out in the hydroxylation reaction with excellent yield. It was worth nothing that the reaction could completed within 1 min in all cases in the presence of ethanol as co-solvent.
- Dong, Zhenhua,Liu, Mengmeng,Pan, Hongguo
-
-
- Highly efficient heterogeneous V2O5@TiO2 catalyzed the rapid transformation of boronic acids to phenols
-
A V2O5@TiO2 catalyzed green and efficient protocol for the hydroxylation of boronic acid into phenol has been developed utilizing environmentally benign oxidant hydrogen peroxide. A wide range of electron-donating and the electron-withdrawing group-containing (hetero)aryl boronic acids were transformed into their corresponding phenol. The methodology was also applied successfully to transform various natural and bioactive molecules like tocopherol, amino acids, cinchonidine, vasicinone, menthol, and pharmaceuticals such as ciprofloxacin, ibuprofen, and paracetamol. The other feature of the methodology includes gram-scale synthetic applicability, recyclability, and short reaction time.
- Upadhyay, Rahul,Singh, Deepak,Maurya, Sushil K.
-
supporting information
p. 3925 - 3931
(2021/08/24)
-
- Isotruxene-based porous polymers as efficient and recyclable photocatalysts for visible-light induced metal-free oxidative organic transformations
-
Two new isotruxene-based porous polymers were prepared and demonstrated to be highly efficient, metal-free heterogeneous photocatalysts for oxidative transformations using air as the mild oxidant under visible-light irradiation. Both catalysts show excellent recyclability. In addition, the reactions can be performed in water, further indicating the greenness of this method. This journal is
- Zhang, Haowen,Zhang, Xiao,Zheng, Ying,Zhou, Cen
-
supporting information
p. 8878 - 8885
(2021/11/27)
-
- Cu2O/TiO2 as a sustainable and recyclable photocatalyst for gram-scale synthesis of phenols in water
-
A green and straightforward protocol was developed for the synthesis of phenols from aryl boronic acid using an inexpensive and available Cu2O/TiO2 photocatalyst under visible light and sunlight. This approach proceeded in mild reaction conditions in water and the presence of air as a green oxidant, resulting in the corresponding phenols in good to excellent yields. Sunlight was also a sustainable source for this photochemical reaction. Heterogeneous nano photocatalyst was successfully recovered in 8 consecutive runs. It is noteworthy that, the photocatalyst exhibited high activity for the large-scale synthesis of phenols.
- Hosseini-Sarvari, Mona,Keshavarz, Kimia,Tavakolian, Mina
-
-
- Application of Electron-Rich Covalent Organic Frameworks COF-JLU25 for Photocatalytic Aerobic Oxidative Hydroxylation of Arylboronic Acids to Phenols
-
Visible-light-driven organic reactions are environmentally friendly green chemical transformations among which photosynthetic oxidative hydroxylation of arylboronic acids to phenols has attracted increasing research interest during the very recent years. Given the efficiency and reusability of heterogeneous catalysts, COF-JLU25, an electron-rich COF-based photocatalyst constructed by integrating electron-donating blocks 1,3,6,8-tetrakis(4-aminophenyl)pyrene (PyTA) and 4-[4-(4-formylmethyl)-2,5-dimethoxyphenyl] benzaldehyde (TpDA), was selected as a photocatalyst for the oxidative hydroxylation of arylboronic acids. In our studies, COF-JLU25 demonstrated excellent photocatalytic activity with high efficiency, robust reusability, and low catalyst loading, showcasing an application potential of previously underexplored COF-based photocatalyst composed solely of electron-rich units.
- Xiao, Guangjun,Li, Wenqian,Chen, Tao,Hu, Wei-Bo,Yang, Hui,Liu, Yahu A.,Wen, Ke
-
supporting information
p. 3986 - 3991
(2021/03/29)
-
- An efficient Ti0.95Cu0.05O1.95 catalyst for ipso – hydroxylation of arylboronic acid and reduction of 4-nitrophenol
-
A stable, active and selective Ti0.95Cu0.05O1.95 catalyst, crystallized in anatase TiO2 structure with 5% Cu2+ ions substituted for Ti4+ ions with 5% oxide ion vacancy has been synthesized by solution combustion method. The catalyst was coated over a cordierite monolith (Mg2Al4Si5O18) by solution combustion method. By the first principle density functional theory (DFT) calculations, 48 atoms bulk structure has been optimized and density of states (DOS) has been calculated. Ti – O bond distribution in Ti0.95Cu0.05O1.95 has been compared with pure TiO2. Bond distribution analysis has shown longer Cu – O and Ti – O bonds compared to those in CuO and TiO2 creating Cu2+ and oxide ion vacancy as electrophilic and nucleophilic active sites, respectively. This catalyst was found to be very active for ipso – hydroxylation of arylboronic acid and 4-nitrophenol reduction reactions at room temperature. Catalyst coated cordierite monolith was used in the recycling process of the reaction for 20 cycles and cumulative turnover frequency was found to be 184,840 h?1. Ti0.95Cu0.05O1.95 catalyst coated on cordierite monolith enhanced the rate of the reaction compared to powder catalyst and made the handling and recycling of the catalyst very easy. Graphic abstract: [Figure not available: see fulltext.]
- Bhat, Shrikanth K,Dasappa, Jagadeesh Prasad,Hegde, M. S.,Prasanna
-
-
- Decarboxylative Hydroxylation of Benzoic Acids
-
Herein, we report the first decarboxylative hydroxylation to synthesize phenols from benzoic acids at 35 °C via photoinduced ligand-to-metal charge transfer (LMCT)-enabled radical decarboxylative carbometalation. The aromatic decarboxylative hydroxylation is synthetically promising due to its mild conditions, broad substrate scope, and late-stage applications.
- Ritter, Tobias,Su, Wanqi,Xu, Peng
-
supporting information
p. 24012 - 24017
(2021/10/06)
-
- Method for synthesizing heteroatom- substituted aromatic compound from styrene compound
-
The invention discloses a method for synthesizing a heteroatom-substituted aromatic compound from a styrene compound, which comprises the following steps of: mixing a styrene compound with a general formula (I) and a heteroatom-containing compound with a general formula (II), and reacting in the presence of an acid additive and an organic solvent to obtain a heteroatom-substituted compound with ageneral formula (III). According to the synthesis method disclosed by the invention, a large amount of styrene compounds are used as raw materials and react to generate aromatic amine or phenol compounds under the action of no metal catalysis; and compared with the traditional aromatic amine and phenol synthesis method, the method has the advantages of high yield, simple conditions, low waste discharge amount, no metal participation, simple reaction equipment, easiness in industrial production and the like.
- -
-
Paragraph 0326-0329
(2021/02/06)
-
- Method for hydrolyzing diarylether compound to generate aryl phenol compound
-
The invention discloses a method for hydrolyzing a diarylether compound to generate an arylphenol compound. According to the method, visible light is utilized to excite a photosensitizer for catalysis. In a reaction solvent, the raw material in the formula (1) breaks a C (sp2)-O bond under the auxiliary action of acid, and hydrolysis is performed to obtain the bimolecular aryl phenol compounds in the formula (3) and the formula (4). The method can catalyze the reaction at room temperature, is green and environment-friendly, and is easy to operate; the universality is wide, the reaction yield is relatively high, and the tolerance of functional groups is strong; the synthesis method not only can realize small-scale hydrolysis conversion of various diarylether compounds, but also can realize hydrolysis of herbicidal ether, triclosan and a lignin template substrate, and even can realize large-scale hydrolysis of triclosan and the lignin template substrate to realize gram-level degradation. A new strategy is provided for recovering phenol derivatives through lignin hydrolysis, degrading pesticides and purifying wastewater containing a degerming agent or herbicide. The method has wide application prospect and use value.
- -
-
Paragraph 0054-0057
(2021/09/29)
-
- Alkylsulfenyl thiocarbonates: precursors to hydropersulfides potently attenuate oxidative stress
-
The recent discovery of the prevalence of hydropersulfides (RSSH) species in biological systems suggests their potential roles in cell regulatory processes. However, the reactive and transient nature of RSSH makes their study difficult, and dependent on the use of donor molecules. Herein, we report alkylsulfenyl thiocarbonates as a new class of RSSH precursors that efficiently release RSSH under physiologically relevant conditions. RSSH release kinetics from these precursors are tunable through electronic modification of the thiocarbonate carbonyl group's electrophilicity. In addition, these precursors also react with thiols to release RSSH with a minor amount of carbonyl sulfide (COS). Importantly, RSSH generation by these precursors protects against oxidative stress in H9c2 cardiac myoblasts. Furthermore, we demonstrate the ability of these precursors to increase intracellular RSSH levels.
- Aggarwal, Sahil C.,Khodade, Vinayak S.,Paolocci, Nazareno,Pharoah, Blaze M.,Toscano, John P.
-
p. 8252 - 8259
(2021/06/22)
-
- Photocatalytic Reductive C-O Bond Cleavage of Alkyl Aryl Ethers by Using Carbazole Catalysts with Cesium Carbonate
-
Methods to activate the relatively stable ether C-O bonds and convert them to other functional groups are desirable. One-electron reduction of ethers is a potentially promising route to cleave the C-O bond. However, owing to the highly negative redox potential of alkyl aryl ethers (Ered -2.6 V vs SCE), this mode of ether C-O bond activation is challenging. Herein, we report the visible-light-induced photocatalytic cleavage of the alkyl aryl ether C-O bond using a carbazole-based organic photocatalyst (PC). Both benzylic and non-benzylic aryl ethers underwent C-O bond cleavage to form the corresponding phenol products. Addition of Cs2CO3 was beneficial, especially in reactions using a N-H carbazole PC. The reaction was proposed to occur via single-electron transfer (SET) from the excited-state carbazole to the substrate ether. Interaction of the N-H carbazole PC with Cs2CO3 via hydrogen bonding exists, which enables a deprotonation-assisted electron-transfer mechanism to operate. In addition, the Lewis acidic Cs cation interacts with the substrate alkyl aryl ether to activate it as an electron acceptor. The high reducing ability of the carbazole combined with the beneficial effects of Cs2CO3 made this otherwise formidable SET event possible.
- Yabuta, Tatsushi,Hayashi, Masahiko,Matsubara, Ryosuke
-
p. 2545 - 2555
(2021/02/01)
-
- Electrochemical-induced hydroxylation of aryl halides in the presence of Et3N in water
-
A thorough study of mild and environmentally friendly electrochemical-induced hydroxylation of aryl halides without a catalyst is presented. The best protocol consists of hydroxylation of different aryl iodides and aryl bromides by water solution in the presence of Et3N under air, affording the target phenols in good isolated yields. Moreover, aryl chlorides were successfully employed as substrates. This methodology also provides a direct pathway for the formation of deoxyphomalone, which displayed a significant anti-proliferation effect.
- Ke, Fang,Lin, Chen,Lin, Mei,Long, Hua,Wu, Mei,Yang, Li,Zhuang, Qinglong
-
supporting information
p. 6417 - 6421
(2021/08/03)
-
- Selective hydroxylation of aryl iodides to produce phenols under mild conditions using a supported copper catalyst
-
Owing to the high activity and low-cost, copper-based catalysts are promising candidates for transforming aromatic halides to yield phenols. In this work, we report the selective hydroxylation of aromatic iodides to produce phenols using an atomically dispersed copper catalyst (Cu-ZnO-ZrO2) under mild reaction conditions. The reactions were conducted without the use of additional organic ligands, and the protection of an inert atmosphere environment is not required. The catalyst can be easily prepared, scalable, and is very efficient for a wide range of substrates. The catalytic reactions can be carried out with only 1.24 mol% Cu loading, which shows great potential in mass production.
- Auni, Anika,Ding, Guodong,Hao, Leiduan,Li, Tao,Li, Xiaoyu,Xu, Haiping,Zhang, Qiang
-
p. 25348 - 25353
(2021/08/03)
-
- A copper nitride catalyst for the efficient hydroxylation of aryl halides under ligand-free conditions
-
Copper nitride (Cu3N) was used as a heterogeneous catalyst for the hydroxylation of aryl halides under ligand-free conditions. The cubic Cu3N nanoparticles showed high catalytic activity, comparable to those of conventional Cu catalysts with nitrogen ligands, demonstrating that the nitrogen atoms in Cu3N act as functional ligands that promote hydroxylation.
- Mitsudome, Takato,Mizugaki, Tomoo,Xu, Hang,Yamaguchi, Sho
-
supporting information
p. 6593 - 6597
(2021/08/10)
-
- Photocatalytic synthesis of phenols mediated by visible light using KI as catalyst
-
A transition-metal-free hydroxylation of iodoarenes to afford substituted phenols is described. The reaction is promoted by KI under white LED light irradiation and uses atmospheric oxygen as oxidant. By the use of triethylamine as base and solvent, the corresponding phenols are obtained in moderate to good yields. Mechanistic studies suggest that KI and catalysis synergistically promote the cleavage of C-I bond to form free aryl radicals.
- Huiqin, Wei,Wu, Mei
-
supporting information
(2021/11/30)
-
- Quaternary ammonium hydroxide-functionalized g-C3N4 catalyst for aerobic hydroxylation of arylboronic acids to phenols
-
A new and efficient metal-free approach toward the synthesis of phenols via an aerobic hydroxylation of arylboronic acids by using a novel quaternary ammonium hydroxide g-C3N4 catalyst has been described. The functionalized quaternary ammonium hydroxide (g-C3N4-OH) has been prepared from graphitic carbon nitride (g-C3N4) scaffold by converting the residual –NH2 and –NH groups to quaternary methyl ammonium iodide by performing a methylation reaction with methyl iodide followed by ion-exchange with 0.1 N KOH or anion exchange resin Amberlyst A26 (OH- form) by post-synthetic modification. The resultant g-C3N4-OH was characterized by XRD, FTIR, field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), N2 adsorption/desorption isotherms, and acid–base titration. Tested as solid-base catalysts, the g-C3N4-OH showed excellent catalytic activity in the aerobic hydroxylation reaction by converting a variety of arylboronic acids to the corresponding phenols in high yields. More importantly, the g-C3N4-OH solid-base has been successfully reused four times with the minor loss of initial catalytic activity (10.5percent).
- Muhammad, Ibrahim,Mannathan, Subramaniyan,Sasidharan, Manickam
-
p. 1470 - 1476
(2020/07/13)
-
- Aerobic photooxidative hydroxylation of boronic acids catalyzed by anthraquinone-containing polymeric photosensitizer
-
We report herein the synthesis of a polymeric photosensitizer and its application in aerobic photooxidative hydroxylation of boronic acids. The polymeric photosensitizer was synthesized by the condensation of anthraquinone-2-carbonyl chloride (AQ-2-COCl) with poly (2-hydroxyethyl methacrylate) (PHEMA). The photo-oxidative hydroxylation of boronic acids using anthraquinone-containing-poly (2-hydroxyethyl methacrylate) (AQ-PHEMA) was then explored and shown to exhibit high efficiency and broad scope. Moreover, AQ-PHEMA could be easily recovered and reused for more than 20 times without significant loss of the catalytic activity.
- Chen, Yang,Ding, Aishun,Hu, Jianhua
-
p. 7927 - 7932
(2020/03/11)
-
- An efficient base and H2O2 free protocol for the synthesis of phenols in water and oxygen using spinel CuFe2O4 magnetic nanoparticles
-
An efficient base and H2O2 free protocol was used for the synthesis of phenols from boronic acids using biogenic CuFe2O4 magnetic nanoparticles as catalyst at room temperature in water and oxygen. The catalyst was prepared using the flowers of Lantana camara. The size of the nanoparticles was 4.27 nm. Base free and ligand free protocol, less time, excellent yields, room temperature, biogenic synthesis of the catalyst, use of O2 as an environmentally friendly oxidant are the advantages of the present protocol. The recyclability of the catalyst was for 5 cycles without loss of magnetic property or catalytic activity.
- Chutia, Rituparna,Chetia, Bolin
-
p. 1925 - 1936
(2020/08/13)
-
- Pyrenediones as versatile photocatalysts for oxygenation reactions with: In situ generation of hydrogen peroxide under visible light
-
Pyrenediones (PYDs) are efficient photocatalysts for three oxygenation reactions: Epoxidation of electron deficient olefins, oxidative hydroxylation of organoborons, and oxidation of sulfides via in situ generation of H2O2 under visible light irradiation, using oxygen as a terminal oxidant and IPA as a solvent and a hydrogen donor.
- Zhang, Yuannian,Yang, Xin,Tang, Haidi,Liang, Dong,Wu, Jie,Huang, Dejian
-
supporting information
p. 22 - 27
(2020/01/13)
-
- Glass wool supported ruthenium complexes: Versatile, recyclable heterogeneous photoredox catalysts
-
The present study describes the development of heterogeneous photoredox catalysts based on ruthenium complexes anchored onto a glass surface (glass wool). These easy-to-handle, inexpensive and reusable fiber-like materials allow Ru-based photoredox catalysis in the heterogeneous phase. Here we report the synthesis and characterization of these new materials, and evaluate their remarkable photocatalytic activity to engage in aerobic photooxidative reactions. In particular, the oxidative hydroxylation of arylboronic acids and the singlet oxygen-mediated photooxidation of 9,10-dimethylanthracene (DMA) and 2-ethylfuran are achieved with excellent yields (>95%) within 6 h of irradiation using blue LEDs (λ ～ 450 nm). Further, the materials can be reused at least 6 times without any significant loss of activity, thus revealing their high stability and recyclability. The strategy takes advantage of the broad knowledge on Ru-based photocatalysis while adding the recovery and reuse benefits of heterogeneous catalysis. Additionally, these materials are promising alternatives for flow photochemistry. This approach that allows attachment of Ru complexes onto glass wool can be extended for use to other transition-metal complexes as photoredox catalysts.
- De Lucas, Nanci C.,Garden, Simon J.,Lanterna, Anabel E.,Scaiano, Juan C.,Teixeira, Rodolfo I.
-
p. 1273 - 1280
(2020/03/26)
-
- Selective oxidative hydroxylation of arylboronic acids by colloidal nanogold catalyzed in situ generation of H2O2 from alcohols under aerobic conditions
-
Selective hydroxylation of arylboronic acids was achieved through PVP (polyvinylpyrrolidone)-stabilized nanogold catalyzed in situ generated H2O2 formed by the oxidation of an alcoholic solvent under aerobic conditions. The synthetic application of in situ generated H2O2 was investigated through aerobic epoxidation of (E)-chalcone.
- Sakurai, Hidehiro,Vinsen, Yuta Uetake
-
p. 299 - 301
(2020/04/27)
-
- Optimizing the crystallization process of conjugated polymer photocatalysts to promote electron transfer and molecular oxygen activation
-
Photocatalytic reactive oxygen species (ROS)-induced reactions provide an appealing method to solve the environmental and energy issues, whereas the current oxidation reaction generally suffered from low efficiency and poor selectivity due to uncontrollable O2 activation process. In view of the existence of competitive electron and energy transfer pathway, we propose that highly efficient superoxide radical anion (·O2?) generation can be achieved by optimizing the order degree of the photocatalyst. Herein, by taking carbon nitride polymer as an example, we optimized the crystallization process of carbon nitride polymer by selecting precursors of different polymerization degrees with a molten salt method. Benefiting from the high crystallinity, extended π-conjugated system and strong van der-Waals interactions between interlayers, the modified carbon nitride polymer exhibited accelerated charge transport and enhancement in electron induced molecular oxygen activation reactions under visible light. Consequently, the CCN-P exhibits about 1.5 times higher conversion rate in hydroxylation of phenylboronic acid and over 6-fold faster degradation rate in Rh B organic pollutants photodegradation with respect to pristine carbon nitride. This study provides an in-depth understanding on the optimization of the O2 activation process and the design of advanced photocatalysts.
- Anpo, Masakazu,Cheng, Jiajia,Huang, Caijin,Ou, Honghui,Ren, Wei,Wang, Xinchen
-
p. 636 - 645
(2020/07/27)
-
- Visible-light-promoted aerobic oxidative hydroxylation of arylboronic acids in water by hydrophilic organic semiconductor
-
A green and sustainable catalytic system was developed based on perylenediimide (PDI) organic semiconductor for the aerobic oxidative hydroxylation of arylboronic acids in aqueous solution with visible light. By using PDI-SN, a hydrophilic organic semiconductor, which can activate oxygen to produce superoxide radicals in aqueous solution, this reaction proceeds under ambient conditions: water as the solvent and air as the oxidant, giving various phenols as products with high yields. In contrast to methods using organic solvents, this novel process has the potential of green industrial application.
- Yu, Kunyi,Zhang, Hanjie,Sheng, Yuqiang,Zhu, Yongfa
-
supporting information
(2020/06/23)
-
- Electrophotocatalytic SNAr Reactions of Unactivated Aryl Fluorides at Ambient Temperature and Without Base
-
The electrophotocatalytic SNAr reaction of unactivated aryl fluorides at ambient temperature without strong base is demonstrated.
- Huang, He,Lambert, Tristan H.
-
supporting information
p. 658 - 662
(2019/11/28)
-
- Method for preparing alcohol and phenol through aerobic hydroxylation reaction of boric acid derivative in absence of photocatalyst
-
The invention discloses a method for preparing alcohol and phenol through aerobic hydroxylation reaction of a boric acid derivative in the absence of a photocatalyst, wherein the boric acid derivativeis aryl boronic acid or alkyl boronic acid, and the corresponding target compounds are respectively a phenol-based compound and an alcohol-based compound. According to the method, by using a boric acid derivative as a reaction substrate, an additive is added under a solvent condition, and a hydroxylation reaction is performed under aerobic and illumination conditions to obtain a corresponding target compound. According to the invention, the new strategy is provided for the synthesis of phenols through aerobic hydroxylation of aryl boronic acid without a photocatalyst; the catalyst-free aerobic hydroxylation method for photocatalysis of aryl boronic acid or alkyl boronic acid by using triethylamine as an additive is firstly disclosed; and the new method has advantages of photocatalyst-freecondition, wide substrate range and good functional group compatibility.
- -
-
Paragraph 0025-0028; 0030-0032
(2020/01/25)
-
- Method for synthesizing phenol or derivative thereof in aqueous phase by photocatalytic one-pot method
-
The invention discloses a method for synthesizing phenol or a derivative thereof in an aqueous phase by a photocatalytic one-pot method. The method comprises the following steps: by taking a compoundaryl halide shown in formula (I) as a raw material and water as a solvent, adding a catalyst and an auxiliary agent, and carrying out reacting under the conditions of alkali and visible light to obtain the phenol or the derivative (II) thereof. Compared with the prior art, the method is applicable to a large number of functional groups, high in yield, few in byproducts, simple and safe to operate,low in cost and environmentally friendly, wherein R is selected from substituted or non-substituted phenyl, pyridyl, quinolyl or pyrimidinyl; X is selected from halogen; the substituted phenyl is substituted by C1-C4 alkyl, C1-C4 alkoxy, hydroxyl, halogen, cyano, aldehyde group, nitro, amino, acetyl or carboxyl; and the substituted pyridyl, quinolyl or pyrimidinyl is pyridyl, quinolyl or pyrimidinyl substituted by C1-C4 alkyl.
- -
-
Paragraph 0032-0033; 0040-0041; 0085-0106
(2020/12/08)
-
- Fluorinations of unsymmetrical diaryliodonium salts containing: Ortho -sidearms; Influence of sidearm on selectivity
-
Activated aromatics were reacted with two different fluoroidoane reagents 1 and 2 in the presence of triflic acid to prepare only the para-substituted diaryliodonium salts. With fluoroiodane 1 the unsymmetrical diaryliodonium salts contained an ortho-propan-2-ol sidearm, whereas the alcohol sidearm was eliminated to form an ortho-styrene sidearm in the reaction with fluoroiodane 2. Only the diaryliodonium salts containing a styrene sidearm were fluorinated successfully to deliver para-fluorinated aromatics in good yields.
- Abudken, Ahmed M. H.,Hope, Eric G.,Singh, Kuldip,Stuart, Alison M.
-
supporting information
p. 6140 - 6146
(2020/10/30)
-
- Activity and specificity studies of the new thermostable esterase EstDZ2
-
In this paper, we study the activity and specificity of EstDZ2, a new thermostable carboxyl esterase of unknown function, which was isolated from a metagenome library from a Russian hot spring. The biocatalytic reaction employing EstDZ2 proved to be an efficient method for the hydrolysis of aryl p-, o- or m-substituted esters of butyric acid and esters of secondary alcohols. Docking studies revealed structural features of the enzyme that led to activity differences among the different substrates.
- Myrtollari, Kamela,Katsoulakis, Nikolaos,Zarafeta, Dimitra,Pavlidis, Ioannis V.,Skretas, Georgios,Smonou, Ioulia
-
supporting information
(2020/09/16)
-
- Cu(I)/sucrose-catalyzed hydroxylation of arenes in water: The dual role of sucrose
-
A protocol for the hydroxylation of aryl halides catalyzed by copper(I) and sucrose in neat water has been developed. The dual role of sucrose, the reaction pathway, and the high selectivity for hydroxylation were investigated using a combination of experimental and theoretical techniques. This journal is
- Murata, Shigeo,Takagi, Mio,Takita, Ryo,Watanabe, Ayako,Watanabe, Kohei
-
supporting information
p. 7827 - 7831
(2020/11/02)
-
- Trichloroacetonitrile as an efficient activating agent for the: Ipso -hydroxylation of arylboronic acids to phenolic compounds
-
A metal-free and base-free Cl3CCN mediated method was developed for the ipso-hydroxylation of aryl boronic acids to their corresponding phenols, which was promoted by a key unstable Lewis adduct intermediate. This transformation has broad functional group tolerance, and late-stage functionalization was successful as well. After simple investigation, two pathways (radical/ionic mechanism) were suggested, and the beneficial action of blue light needs to be further studied.
- Fang, Yuanding,Zhao, Rong,Yao, Yuan,Liu, Yang,Chang, Denghu,Yao, Ming,Shi, Lei
-
p. 7558 - 7563
(2019/08/20)
-
- Phthalocyanine Zinc-catalyzed Hydroxylation of Aryl Boronic Acids under Visible Light
-
A visible-light-promoted aerobic oxidative hydroxylation of boronic acids using phthalocyanine zinc as an easily available photosensitizer has been developed. It provided a direct access to synthesize aliphatic alcohols and phenols from boronic acids. The advantages of this approach included the low catalyst loading (0.5 mol%), high efficient, the use of O2 as an oxygen source, wide substrate range, the simple operational process, and mild conditions. (Figure presented.).
- Luo, Dong-Ping,Huang, Yang-Feng,Hong, Xiao-Yi,Chen, Dingben,Li, Guo-Xing,Huang, Xiao-Bo,Gao, Wen-Xia,Liu, Miao-Chang,Zhou, Yun-Bing,Wu, Hua-Yue
-
supporting information
p. 961 - 964
(2019/01/25)
-
- The highly efficient air oxidation of aryl and alkyl boronic acids by a microwave-assisted protocol under transition metal-free conditions
-
Molecular oxygen is the most important green-oxidant due to its excellent properties. However, the effective utilization of molecular oxygen remains a major challenge in modern chemistry. Herein, we report the development a rapid, green and efficient microwave-assisted protocol for the air oxidation of boronic acids to phenols and alcohols under transition metal-free conditions. In the presence of KOH and DMSO, high yields of the expected phenols and alcohol were obtained with microwave-assistance, and a variety of functional groups were tolerated in this procedure. Notably, this transition metal-free method represents a breakthrough in both organic synthesis and green chemistry for the oxidative hydroxylation of boronic acids to phenols and alcohols.
- Yin, Weiyan,Pan, Xizhi,Leng, Wenxi,Chen, Jian,He, Haifeng
-
supporting information
p. 4614 - 4618
(2019/09/09)
-
- Photoinduced hydroxylation of arylboronic acids with molecular oxygen under photocatalyst-free conditions
-
Photoinduced hydroxylation of boronic acids with molecular oxygen under photocatalyst-free conditions is reported, providing a green entry to a variety of phenols and aliphatic alcohols in a highly concise fashion. This new protocol features photocatalyst-free conditions, wide substrate scope and excellent functional group compatibility.
- Xu, Yu-Ting,Li, Chen-Yuan,Huang, Xiao-Bo,Gao, Wen-Xia,Zhou, Yun-Bing,Liu, Miao-Chang,Wu, Hua-Yue
-
supporting information
p. 4971 - 4975
(2019/09/30)
-
- Cellulose as recyclable organocatalyst for ipso-hydroxylation of arylboronic acids
-
Cellulose catalyzed oxidative hydroxylation of aryl and hetero-arylboronic acids to the corresponding phenols under metal and base free strategy has been demonstrated. The sustainable ipso-hydroxylation takes place using hydrogen peroxide as an oxidant in water under mild condition in shorter period of time. Interestingly, easy recovery and reusability of heterogeneous catalyst without significant loss in catalytic yield makes the protocol environmentally benign.
- Laskar, Khairujjaman,Paul, Subham,Bora, Utpal
-
-
- A simple, fast and excellent protocol for the synthesis of phenols using CuFe 2O 4 magnetic nanoparticles
-
Abstract: This paper describes a very mild, quick and simple protocol for the synthesis of phenols using CuFe 2O 4 magnetic nanoparticles as a catalyst. The nanosized catalyst has an average diameter of 17.63 nm. The magnetic nanoparticles were characterized by SEM, EDX, VSM, XRD and TEM analysis. The synthesis of phenols from phenylboronic acids using H 2O 2 as an oxidant proceeded very well with excellent yields. Heterogeneous catalyst, easy recyclability, mild reaction conditions, short reaction time added as an advantage for the present protocol. Graphical Abstract: A very mild, quick and efficient protocol has been designed for the preparation of phenols from phenyl boronic acids using CuFe 2O 4 Magnetic Nanoparticles (MNPs) as a catalyst. Heterogeneous catalyst, easy recyclability added as an advantage for the protocol.[Figure not available: see fulltext.].
- Chutia, Rituparna,Chetia, Bolin
-
-
- Room-Temperature Ionic Liquids (RTILs) as Green Media for Metal- and Base-Free ipso -Hydroxylation of Arylboronic Acids
-
The oxidative hydroxylation of arylboronic acids to the corresponding phenolic compounds under metal- and base-free aerobic conditions is successfully demonstrated on a greener media. Hydrogen peroxide, as an eco-friendly oxidant, is compatible with green mediates room-temperature ionic liquids (RTIL)s, providing hydroxylation products of arylboronic acids in an efficient manner. The RTIL support is particularly interesting for its reusability.
- Kim, Seung-Hoi,Kwon, Gyu-Tae,Shin, Eun-Jae
-
supporting information
p. 1815 - 1819
(2019/09/09)
-
- Catalyst- And solvent-free: Ipso -hydroxylation of arylboronic acids to phenols
-
A catalyst-free method for the hydroxylation of arylboronic acids to form the corresponding phenols with sodium perborate as the oxidant was developed using water as the solvent. Under the reaction conditions, the yield of phenol reached 92% at only 5 min. Moreover, the reaction could be conducted without a catalyst under the solvent-free condition, the efficiency of which was as high as that of a liquid-phase reaction. Using a microcalorimeter, the reaction was found to be an exothermic reaction. The reaction mechanism was investigated and understood via DFT calculations, which revealed that it was a nucleophilic reaction.
- Yang, Xiufang,Jiang, Xulu,Wang, Weitao,Yang, Qi,Ma, Yangmin,Wang, Kuan
-
p. 34529 - 34534
(2019/11/13)
-
- Potassium: Tert -butoxide mediated aerobic hydroxylation of arylboronic acids: An application towards the synthesis of (E)-phenoxy acrylates
-
The first example of potassium tert-butoxide mediated aerobic hydroxylation of arylboronic acids is described. A variety of arylboronic acids bearing both electron donating and withdrawing substituents successfully participated in the reaction and furnished phenols in good yields. This strategy also provides access to one pot synthesis of (E)-3-phenoxy acrylates from arylboronic acids and propiolates. The solvent plays an important role and a binary solvent system comprising CH3CN/THF is found to be the best.
- Muhammad, Ibrahim,Balakrishnan, Madasamy Hari,Sasidharan, Manickam,Mannathan, Subramaniyan
-
supporting information
p. 11065 - 11068
(2019/07/31)
-
- Rationally Designed Double-Shell Dodecahedral Microreactors with Efficient Photoelectron Transfer: N-Doped-C-Encapsulated Ultrafine In2O3 Nanoparticles
-
It is desirable but challenging to design efficient micro-/nanoreactors for chemical reactions. In this study, we have fabricated mesoporous double-shelled hollow microreactors composed of N-doped-C-coated ultrafine In2O3 nanoparticles [N-C/In2O3 HD (hollow dodecahedron)] by the thermolysis of a dodecahedral In-based framework in Ar atmosphere. The obtained N-C/In2O3 HD exhibited excellent activity in the photocatalytic oxidative hydroxylation of a series of arylboronic acid substrates. This property can be attributed to its enhanced optical absorption and efficient separation of photo-generated electron–hole pairs, imparted by the unique structure and uniformly coated N-doped C layers. Furthermore, we found O2.? to be the critical active species in the process of photocatalytic oxidative hydroxylation of arylboronic acids, and the formation mechanism of this radical is also proposed. Theoretical calculations further confirmed that the N-doped C layer serves as an electron acceptor and revealed the microscopic charge-carrier migration path through the In2O3/N-doped graphite interfaces. Thus, photo-generated electrons from hybrid states of In2O3, composed of In 5s and 2p orbitals, are transferred into the hybrid states of N-doped graphite, composed of C 2p and N 2p orbitals. The present study may be helpful for understanding and designing carbon-based micro-/nanoreactors for photocatalytic reactions, and may also be useful for investigating related micro-/nanoreactors.
- Sun, Liming,Li, Rong,Zhan, Wenwen,Wang, Fan,Zhuang, Yuan,Wang, Xiaojun,Han, Xiguang
-
p. 3053 - 3060
(2019/02/06)
-
- Solar-driven conversion of arylboronic acids to phenols using metal-free heterogeneous photocatalysts
-
Solar-driven conversion of arylboronic acids to phenols was achieved by employing graphitic carbon nitride (g-C3N4) as heterogeneous photocatalyst, where [rad]O2? was the main active species. By loading g-C3N4 onto the easy weaving low melting point sheath-core composite polyester fibers (LMPET), g-C3N4-based artificial photosynthetic catalytic fabric (g-C3N4/LMPET) with a large light receiving area was prepared. It displayed the efficient conversion of arylboronic acid and excellent recycling performance. This system offers more possibilities to construct an artificial photosynthetic system with excellent solar-to-chemicals conversion efficiency.
- Xu, Tiefeng,Lu, Wangyang,Wu, Xiao-Feng,Chen, Wenxing
-
-
- Significantly enhanced photocatalytic performance of In2O3 hollow spheres: via the coating effect of an N,S-codoped carbon layer
-
A typical catalytic process generally consists of diffusion, adsorption and surface reaction, which should be fully taken into account for the catalyst design. In this article, we synthesized hollow spheres (N,S-C/In2O3 HSs) assembled from N,S-codoped carbon layer coated In2O3 nanoparticles, in which the porous architecture could provide diffusion channels for reactant molecules, the N,S-codoped carbon layer could enhance the separation efficiency of photogenerated carriers, and the hollow structure could improve the amount of active sites and enhance the light utilization efficiency. The obtained N,S-C/In2O3 HS exhibits extraordinary photocatalytic oxidative hydroxylation of arylboronic acids under blue-light irradiation. From the theoretical calculations, it was found that the carbon layer not only strengthens the adsorption of arylboronic acid reactants, but also activates the boron atom in arylboronic acids. The present work indicates that the carbon layer could be used as a medium between inorganic semiconductor photocatalysts and organic reactant molecules, thus promoting the application scope of inorganic semiconductor photocatalysts in the field of selective organic synthesis.
- Sun, Liming,Yuan, Yusheng,Li, Rong,Zhan, Wenwen,Wang, Xiao-Jun,Zhao, Yanli,Han, Xiguang
-
supporting information
p. 25423 - 25432
(2019/11/19)
-
- Oxalic amide ligands, and uses thereof in copper-catalyzed coupling reaction of aryl halides
-
The present invention provides oxalic amide ligands and uses thereof in copper-catalyzed coupling reaction of aryl halides. Specifically, the present invention provides a use of a compound represented by formula I, wherein definitions of each group are described in the specification. The compound represented by formula I can be used as a ligand in copper-catalyzed coupling reaction of aryl halides for the formation of C—N, C—O and C—S bonds.
- -
-
Page/Page column 122
(2020/01/09)
-
- Reductive C-O, C-N, and C-S Cleavage by a Zirconium Catalyzed Hydrometalation/β-Elimination Approach
-
A zirconium catalyzed reductive cleavage of Csp3 and Csp2 carbon-heteroatom bonds is reported that makes use of a tethered alkene functionality as a traceless directing group. The reaction is successfully demonstrated on C-O, C-N, and C-S bonds and proposed to proceed via a hydrozirconation/β-heteroatom elimination sequence of an in situ formed zirconium hydride catalyst. The positional isomerization of the catalyst further enables the cleavage of homoallylic ethers and the removal of terminal allyl and propargyl groups.
- Matt, Christof,K?lblin, Frederic,Streuff, Jan
-
supporting information
p. 6983 - 6988
(2019/09/09)
-
- Photoinduced Hydroxylation of Organic Halides under Mild Conditions
-
Presented in this paper is photoinduced hydroxylation of organic halides, providing a mild access to a range of functionalized phenols and aliphatic alcohols. These reactions generally proceed under mild reaction conditions with no need for a photocatalyst or a strong base and show a wide substrate scope as well as excellent functional group tolerance. This work highlights the unique role of NaI that allows a challenging transformation to proceed under mild reaction conditions.
- Cai, Yue-Ming,Xu, Yu-Ting,Zhang, Xin,Gao, Wen-Xia,Huang, Xiao-Bo,Zhou, Yun-Bing,Liu, Miao-Chang,Wu, Hua-Yue
-
supporting information
p. 8479 - 8484
(2019/10/16)
-
- Visible-Light-Mediated Aerobic Oxidation of Organoboron Compounds Using in Situ Generated Hydrogen Peroxide
-
A simple and general visible-light-mediated oxidation of organoboron compounds has been developed with rose bengal as the photocatalyst, substoichiometric Et3N as the electron donor, as well as air as the oxidant. This mild and metal-free protocol shows a broad substrate scope and provides a wide range of aliphatic alcohols and phenols in moderate to excellent yields. Notably, the robustness of this method is demonstrated on the stereospecific aerobic oxidation of organoboron compounds.
- Weng, Wei-Zhi,Liang, Hao,Zhang, Bo
-
supporting information
p. 4979 - 4983
(2018/08/24)
-
- Green Photoorganocatalytic Synthesis of Phenols from Arylboronic Acids
-
A green and cheap protocol for the photocatalytic hydroxylation of arylboronic acids is presented. 2,2-Dimethoxy-2-phenylacetophenone proved to be the best photoinitiator, among a range of organocatalysts in promoting this reaction. This photocatalytic protocol can be expanded into a wide substrate scope of aromatic boronic acids bearing various functional groups, leading to the corresponding phenols in good to high yields under mild reaction conditions, which include water as solvent, light irradiation provided from standard light-bulbs at room temperature.
- Sideri, Ioanna K.,Voutyritsa, Errika,Kokotos, Christoforos G.
-
supporting information
p. 1324 - 1328
(2017/12/06)
-
- Correlating the Surface Basicity of Metal Oxides with Photocatalytic Hydroxylation of Boronic Acids to Alcohols
-
Photoredox catalysis provides opportunities in harnessing clean and green resources such as sunlight and O2, while the acid and base surface sites of metal oxides are critical for industrial catalysis such as oil cracking. The contribution of metal oxide surfaces towards photocatalytic aerobic reactions was elucidated, as demonstrated through the hydroxylation of boronic acids to alcohols. The strength and proximity of the surface base sites appeared to be two key factors in driving the reaction; basic and amphoteric oxides such as MgO, TiO2, ZnO, and Al2O3 enabled high alcohol yields, while acidic oxides such as SiO2 and B2O3 gave only low yields. The reaction is tunable to different irradiation sources by merely selecting photosensitizers of compatible excitation wavelengths. Such surface complexation mechanisms between reactants and earth abundant materials can be effectively utilized to achieve a wider range of photoredox reactions.
- Leow, Wan Ru,Yu, Jiancan,Li, Bin,Hu, Benhui,Li, Wei,Chen, Xiaodong
-
supporting information
p. 9780 - 9784
(2018/07/31)
-
- Electrochemical Hydroxylation of Arenes Catalyzed by a Keggin Polyoxometalate with a Cobalt(IV) Heteroatom
-
The sustainable, selective direct hydroxylation of arenes, such as benzene to phenol, is an important research challenge. An electrocatalytic transformation using formic acid to oxidize benzene and its halogenated derivatives to selectively yield aryl formates, which are easily hydrolyzed by water to yield the corresponding phenols, is presented. The formylation reaction occurs on a Pt anode in the presence of [CoIIIW12O40]5? as a catalyst and lithium formate as an electrolyte via formation of a formyloxyl radical as the reactive species, which was trapped by a BMPO spin trap and identified by EPR. Hydrogen was formed at the Pt cathode. The sum transformation is ArH+H2O→ArOH+H2. Non-optimized reaction conditions showed a Faradaic efficiency of 75 % and selective formation of the mono-oxidized product in a 35 % yield. Decomposition of formic acid into CO2 and H2 is a side-reaction.
- Khenkin, Alexander M.,Somekh, Miriam,Carmieli, Raanan,Neumann, Ronny
-
supporting information
p. 5403 - 5407
(2018/04/19)
-
