3710-43-8

Residential wood combustion emissions were analyzed to determine emission rates and to develop chemical emissions profiles that represent the appliances and woods typically used in wood-burning-communities. Over 350 elements, inorganic compounds, and organic compounds were quantified. A range of 4-9 g/kg dry fuel of particulate matter(a dilution stack sampler equipped with a 2.5-μm particle selective cyclone. Emissions were diluted 20-70 times, cooled to ambient temperature, and allowed 80 s for condensation prior to collection. Wood type, wood moisture, burn rate, and fuel load were varied for different experiments. Fine particle and se mivolatile organic compounds were collected on filter/PUF/XAD/PUF cartridges. Inorganic samples and mass were collected on Teflon and quartz filters. Volatile organic carbon compounds were trapped with Tenax (C8- C20), canister (C2-C12), and 2,4-dinitrophenylhydrazine impregnated cartridges (carbonyl compounds). Analysis of particle and semivolatile organic species was conducted by gas chromatography/mass spectrometry. Teflon filters were analyzed for mass by gravimetry, trace elements were analyzed by X-ray fluorescence and ammonium was analyzed by automated colorimetry. Quartz filters were analyzed for organic and elemental carbon by thermal/optical reflectance, and forts were analyzed by ion chromatography. Select quartz filters were analyzed by accelerator mass spectrometry for carbon-12 and carbon-14 abundance. Canister and Tenax samples were analyzed by gas chromatography with a flame ionization detector, and carbonyl compounds were analyzed by high-performance liquid chromatography. Residential wood combustion emissions were analyzed to determine emission rates and to develop chemical emissions profiles that represent the appliances and woods typically used in wood-burning communities. Over 350 elements, inorganic compounds, and organic compounds were quantified. A range of 4-9 g/kg dry fuel of particulate matter (a dilution stack sampler equipped with a 2.5-μm particle selective cyclone. Emissions were diluted 20-70 times, cooled to ambient temperature, and allowed 80 s for condensation prior to collection. Wood type, wood moisture, burn rate, and fuel load were varied for different experiments. Fine particle and semivolatile organic compounds were collected on filter/PUF/XAD/PUF cartridges. Inorganic samples and mass were collected on Teflon and quartz filters. Volatile organic carbon compounds were trapped with Tenax (C8-C20), canister (C2-C12), and 2,4-dinitrophenylhydrazine impregnated cartridges (carbonyl compounds). Analysis of particle and semivolatile organic species was conducted by gas chromatography/mass spectrometry. Teflon filters were analyzed for mass by gravimetry, trace elements were analyzed by X-ray fluorescence, and ammonium was analyzed by automated colorimetry. Quartz filters were analyzed for organic and elemental carbon by thermal/optical reflectance, and ions were analyzed by ion chromatography. Select quartz filters were analyzed by accelerator mass spectrometry for carbon-12 and carbon-14 abundance. Canister and Tenax samples were analyzed by gas chromatography with a flame ionization detector, and carbonyl compounds were analyzed by high-performance liquid chromatography.

2,4,6-Trialkylsubstituted pyrylium salts 1 have been known to afford 2-acyl-3,5-dialkyl-furans 2 in moderate yields (30 - 45%). Oxidation of these salts in buffer solutions (pH = 3-4.5) increased the yields of acylfurans to 75%. In contrast, tetra- and pe

The gas-phase methylation of 2- and 3-methyl-pyrroles (2P and 3P), -furans (2F and 3F), and thiophenes (2T and 3T) by (CH3)2F+ ions, from γ-radiolysis of CH3F, has been investigated at pressures ranging from 50 to 760 Torr, in the presence of a thermal radical scavenger (O2) and variable concentrations of an added base (NMe3: 0-10 Torr).The mechanism of the methylation process is discussed and the intrinsic positional selectivity of the (CH3)2F+ ions evaluated in the framework of the Charge and Frontier Orbital Control concept.Owing to the very large energy gap between the LUMO of (CH3)2F+ and the HOMOs of the selected heteroaromatic substrates, their gas-phase methylation is characterized by a distinct affinity of the ionic electrophile toward those substrates positions with the highest net negative charge, i.e., the C3 in 2P (100percent), the C4 in 3P (100percent), the heteroatom of 2F and 3F (>80percent), the C5 of 2T (32percent), and the C2 of 3T (47percent).Analysis of the methylated product distribution from 2F and 3F as a function of the experimental conditions reveals that the interaction of the (CH3)2F+ with the heteroatom of furans gives rise to the reversible formation of two sets of electrostatic adducts, i.e., a "chelate" adduct (III) and a single proton-bonded adduct (IV), the first rapidly evolving to the α-substituted heteroarenium intermediate by proximity effects and the latter slowly rearranging to the chelate structure III.Formation of these categories of electrostatic adducts from furans, which is much less extensive in the case of thiophenes and absent in pyrroles, accounts for the apparent pronounced affinity of gaseous alkylating electrophiles, irrespective of their LUMO energy, for the α carbons of furans. Key words: gas-phase ion chemistry, electrophilic aromatic substitution, radiolysis, dimethylfluoronium ions, methylated heteroarenes.

In the gas phase, under chemical ionization conditions, the sites of attachment of + and + to 2-methylfuran have been studied by tandem mass spectrometry.Spontaneous metastable and collision-induced fragmentations have been compared to those observed for the protonated alkylfuran isomers.The results obtained show that alkylation occurs preferentially at the β-position.