- Cinchona-Alkaloid-Derived NNP Ligand for Iridium-Catalyzed Asymmetric Hydrogenation of Ketones
-
Most ligands applied for asymmetric hydrogenation are synthesized via multistep reactions with expensive chemical reagents. Herein, a series of novel and easily accessed cinchona-alkaloid-based NNP ligands have been developed in two steps. By combining [Ir(COD)Cl]2, 39 ketones including aromatic, heteroaryl, and alkyl ketones have been hydrogenated, all affording valuable chiral alcohols with 96.0-99.9% ee. A plausible reaction mechanism was discussed by NMR, HRMS, and DFT, and an activating model involving trihydride was verified.
- Zhang, Lin,Zhang, Ling,Chen, Qian,Li, Linlin,Jiang, Jian,Sun, Hao,Zhao, Chong,Yang, Yuanyong,Li, Chun
-
supporting information
p. 415 - 419
(2022/01/12)
-
- Amino Acid-Functionalized Metal-Organic Frameworks for Asymmetric Base–Metal Catalysis
-
We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.
- Newar, Rajashree,Akhtar, Naved,Antil, Neha,Kumar, Ajay,Shukla, Sakshi,Begum, Wahida,Manna, Kuntal
-
supporting information
p. 10964 - 10970
(2021/03/29)
-
- Ni2P Nanoalloy as an Air-Stable and Versatile Hydrogenation Catalyst in Water: P-Alloying Strategy for Designing Smart Catalysts
-
Non-noble metal-based hydrogenation catalysts have limited practical applications because they exhibit low activity, require harsh reaction conditions, and are unstable in air. To overcome these limitations, herein we propose the alloying of non-noble metal nanoparticles with phosphorus as a promising strategy for developing smart catalysts that exhibit both excellent activity and air stability. We synthesized a novel nickel phosphide nanoalloy (nano-Ni2P) with coordinatively unsaturated Ni active sites. Unlike conventional air-unstable non-noble metal catalysts, nano-Ni2P retained its metallic nature in air, and exhibited a high activity for the hydrogenation of various substrates with polar functional groups, such as aldehydes, ketones, nitriles, and nitroarenes to the desired products in excellent yields in water. Furthermore, the used nano-Ni2P catalyst was easy to handle in air and could be reused without pretreatment, providing a simple and clean catalyst system for general hydrogenation reactions.
- Fujita, Shu,Yamaguchi, Sho,Yamasaki, Jun,Nakajima, Kiyotaka,Yamazoe, Seiji,Mizugaki, Tomoo,Mitsudome, Takato
-
supporting information
p. 4439 - 4446
(2021/02/09)
-
- Reduction of carbonyl compounds via hydrosilylation catalyzed by well-defined PNP-Mn(I) hydride complexes
-
Reduction reactions of unsaturated compounds are fundamental transformations in synthetic chemistry. In this context, the reduction of polarized double bonds such as carbonyl or C=C motifs can be achieved by hydrogenation reactions. We describe here a highly chemoselective Mn(I)-based PNP pincer catalyst for the hydrosilylation of aldehydes and ketones employing polymethylhydrosiloxane (PMHS) as inexpensive hydrogen donor. Graphic abstract: [Figure not available: see fulltext.]
- Weber, Stefan,Iebed, Dina,Glatz, Mathias,Kirchner, Karl
-
p. 635 - 639
(2021/06/17)
-
- Dynamic Kinetic Resolution of Alcohols by Enantioselective Silylation Enabled by Two Orthogonal Transition-Metal Catalysts
-
A nonenzymatic dynamic kinetic resolution of acyclic and cyclic benzylic alcohols is reported. The approach merges rapid transition-metal-catalyzed alcohol racemization and enantioselective Cu-H-catalyzed dehydrogenative Si-O coupling of alcohols and hydrosilanes. The catalytic processes are orthogonal, and the racemization catalyst does not promote any background reactions such as the racemization of the silyl ether and its unselective formation. Often-used ruthenium half-sandwich complexes are not suitable but a bifunctional ruthenium pincer complex perfectly fulfills this purpose. By this, enantioselective silylation of racemic alcohol mixtures is achieved in high yields and with good levels of enantioselection.
- Oestreich, Martin,Seliger, Jan
-
supporting information
p. 247 - 251
(2020/10/29)
-
- Manganese-Catalyzed Hydrogenation of Ketones under Mild and Base-free Conditions
-
In this paper, several Mn(I) complexes were applied as catalysts for the homogeneous hydrogenation of ketones. The most active precatalyst is the bench-stable alkyl bisphosphine Mn(I) complex fac-[Mn(dippe) (CO)3(CH2CH2CH3)]. The reaction proceeds at room temperature under base-free conditions with a catalyst loading of 3 mol % and a hydrogen pressure of 10 bar. A temperature-dependent selectivity for the reduction of α,β-unsaturated carbonyls was observed. At room temperature, the carbonyl group was selectively hydrogenated, while the C=C bond stayed intact. At 60 °C, fully saturated systems were obtained. A plausible mechanism based on DFT calculations which involves an inner-sphere hydride transfer is proposed.
- Brünig, Julian,Kirchner, Karl,Veiros, Luis F.,Weber, Stefan
-
supporting information
p. 1388 - 1394
(2021/05/31)
-
- Manganese-catalyzed homogeneous hydrogenation of ketones and conjugate reduction of α,β-unsaturated carboxylic acid derivatives: A chemoselective, robust, and phosphine-free in situ-protocol
-
We communicate a user-friendly and glove-box-free catalytic protocol for the manganese-catalyzed hydrogenation of ketones and conjugated C[dbnd]C[sbnd]bonds of esters and nitriles. The respective catalyst is readily assembled in situ from the privileged [Mn(CO)5Br] precursor and cheap 2-picolylamine. The catalytic transformations were performed in the presence of t-BuOK whereby the corresponding hydrogenation products were obtained in good to excellent yields. The described system offers a brisk and atom-efficient access to both secondary alcohols and saturated esters avoiding the use of oxygen-sensitive and expensive phosphine-based ligands.
- Topf, Christoph,Vielhaber, Thomas
-
-
- Chiral Iron(II)-Catalysts within Valinol-Grafted Metal-Organic Frameworks for Enantioselective Reduction of Ketones
-
The development of highly efficient and enantioselective heterogeneous catalysts based on earth-abundant elements and inexpensive chiral ligands is essential for environment-friendly and economical production of optically active compounds. We report a strategy of synthesizing chiral amino alcohol-functionalized metal-organic frameworks (MOFs) to afford highly enantioselective single-site base-metal catalysts for asymmetric organic transformations. The chiral MOFs (vol-UiO) were prepared by grafting of chiral amino alcohol such as l-valinol within the pores of aldehyde-functionalized UiO-MOFs via formation of imine linkages. The metalation of vol-UiO with FeCl2 in THF gives amino alcohol coordinated octahedral FeII species of vol-FeCl(THF)3 within the MOFs as determined by X-ray absorption spectroscopy. Upon activation with LiCH2SiMe3, vol-UiO-Fe catalyzed hydrosilylation and hydroboration of a range of aliphatic and aromatic carbonyls to afford the corresponding chiral alcohols with enantiomeric excesses up to 99%. Vol-UiO-Fe catalysts have high turnover numbers of up to 15 ?000 and could be reused at least 10 times without any loss of activity and enantioselectivity. The spectroscopic, kinetic, and computational studies suggest iron-hydride as the catalytic species, which undergoes enantioselective 1,2-insertion of carbonyl to give an iron-alkoxide intermediate. The subsequent σ-bond metathesis between Fe-O bond and Si-H bond of silane produces chiral silyl ether. This work highlights the importance of MOFs as the tunable molecular material for designing chiral solid catalysts based on inexpensive natural feedstocks such as chiral amino acids and base-metals for asymmetric organic transformations.
- Akhtar, Naved,Antil, Neha,Begum, Wahida,Chauhan, Manav,Kumar, Ajay,Manna, Kuntal,Newar, Rajashree
-
p. 10450 - 10459
(2021/08/31)
-
- Ruthenium-catalyzed hydrogenation of aromatic ketones using chiral diamine and monodentate achiral phosphine ligands
-
The Ru-catalyzed asymmetric hydrogenation of ketones with chiral diamine and monodentate achiral phosphine has been developed. A wide range of ketones were hydrogenated to afford the corresponding chiral secondary alcohols in good to excellent enantioselectivities (up to 98.1% ee). In addition, an appropriate mechanism for the asymmetric hydrogenation was proposed and verified by NMR spectroscopy.
- Wang, Mengna,Zhang, Ling,Sun, Hao,Chen, Qian,Jiang, Jian,Li, Linlin,Zhang, Lin,Li, Li,Li, Chun
-
-
- Ferrocene derivative metal organic complex as well as preparation method and application thereof
-
The invention relates to the technical field of organic synthesis, in particular to a ferrocene derivative metal organic complex and a preparation method and application thereof. The ferrocene derivative metal organic complex disclosed by the invention is shown I, contains a pincerlike ligand in the structure, and therefore has high stability and long service life. , The ferrocene derivative type metal organic complex has high catalytic activity, and only 0.001 μM % - 0.01 μM % is used, so that the chiral compound can be efficiently and rapidly prepared. The ferrocene derivative metal organic complex central metal is ruthenium, the economic cost is low, and the method has the prospect of industrial popularization.
- -
-
Paragraph 0147-0157
(2021/12/07)
-
- Abiotic reduction of ketones with silanes catalysed by carbonic anhydrase through an enzymatic zinc hydride
-
Enzymatic reactions through mononuclear metal hydrides are unknown in nature, despite the prevalence of such intermediates in the reactions of synthetic transition-metal catalysts. If metalloenzymes could react through abiotic intermediates like these, then the scope of enzyme-catalysed reactions would expand. Here we show that zinc-containing carbonic anhydrase enzymes catalyse hydride transfers from silanes to ketones with high enantioselectivity. We report mechanistic data providing strong evidence that the process involves a mononuclear zinc hydride. This work shows that abiotic silanes can act as reducing equivalents in an enzyme-catalysed process and that monomeric hydrides of electropositive metals, which are typically unstable in protic environments, can be catalytic intermediates in enzymatic processes. Overall, this work bridges a gap between the types of transformation in molecular catalysis and biocatalysis. [Figure not available: see fulltext.]
- Ji, Pengfei,Park, Jeeyoung,Gu, Yang,Clark, Douglas S.,Hartwig, John F.
-
p. 312 - 318
(2021/02/26)
-
- Efficient Transfer Hydrogenation of Ketones Catalyzed by a Phosphine-Free Cobalt-NHC Complex
-
A simple phosphine-free cobalt-NHC pincer complex has been synthesized and utilized for the transfer hydrogenation of ketones with 2-propanol as hydrogen donor. A broad range of ketones varying from aromatic, aliphatic and heterocyclic were effectively reduced to their corresponding alcohols in moderate to excellent yields with good tolerance of functional groups.
- Ibrahim, Jessica Juweriah,Reddy, C. Bal,Fang, Xiaolong,Yang, Yong
-
p. 4429 - 4432
(2020/07/04)
-
- RETRACTED ARTICLE: The Manganese(I)-Catalyzed Asymmetric Transfer Hydrogenation of Ketones: Disclosing the Macrocylic Privilege
-
The bis(carbonyl) manganese(I) complex [Mn(CO)2(1)]Br (2) with a chiral (NH)2P2 macrocyclic ligand (1) catalyzes the asymmetric transfer hydrogenation of polar double bonds with 2-propanol as the hydrogen source. Ketones (43 substrates) are reduced to alcohols in high yields (up to >99 %) and with excellent enantioselectivities (90–99 % ee). A stereochemical model based on attractive CH–π interactions is proposed.
- Passera, Alessandro,Mezzetti, Antonio
-
supporting information
p. 187 - 191
(2019/12/11)
-
- Chiral Imidazo[1,5- a]pyridine-Oxazolines: A Versatile Family of NHC Ligands for the Highly Enantioselective Hydrosilylation of Ketones
-
Herein we report the synthesis and application of a versatile class of N-heterocyclic carbene ligands based on an imidazo[1,5-a]pyridine-3-ylidine backbone that is fused to a chiral oxazoline auxiliary. The key step in the synthesis of these ligands involves the installation of the oxazoline functionality via a microwave-assisted condensation of a cyano-azolium salt with a wide variety of 2-amino alcohols. The resulting chiral bidentate NHC-oxazoline ligands form stable complexes with rhodium(I) that are efficient catalysts for the enantioselective hydrosilylation of structurally diverse ketones. The corresponding secondary alcohols are isolated in good yields (typically >90%) with good to excellent enantioselectivities (80-93% ee). The reported hydrosilylation occurs at ambient temperatures (40 °C), with excellent functional group tolerability. Even ketones bearing heterocyclic substituents (e.g., pyridine or thiophene) or complex organic architectures are hydrosilylated efficiently, which is discussed further in this report.
- Chinna Ayya Swamy,Varenikov, Andrii,Ruiter, Graham De
-
supporting information
p. 247 - 257
(2020/02/04)
-
- Asymmetric transfer hydrogenation of ketones promoted by manganese(I) pre-catalysts supported by bidentate aminophosphines
-
A series of commercially available chiral amino-phosphines, in combination with Mn(CO)5Br, has been evaluated for the asymmetric reduction of ketones, using isopropanol as hydrogen source. With the most selective ligand, the corresponding manga
- Azouzi, Karim,Bruneau-Voisine, Antoine,Vendier, Laure,Sortais, Jean-Baptiste,Bastin, Stéphanie
-
-
- A simple and efficient asymmetric hydrogenation of heteroaromatic ketones with iridium catalyst composed of chiral diamines and achiral phosphines
-
An efficient iridium catalyst composed of a simple and commercially available o-methoxytriphenylphosphine and 9-Amino (9-deoxy) epi-cinchonine was applied to the asymmetric hydrogenation of heteroaromatic ketones. A range of simple heteroaromatic ketones could be hydrogenated with good to excellent enantioselectivities and high activities. In particular, thiophene ketones and furyl ketones furnished 98.6% ee with up to 2.18 × 104(1/h) TOF. This catalytic system can be of practical value.
- Li, Chun,Lu, Xunhua,Wang, Mengna,Zhang, Ling,Jiang, Jian,Yan, Shunfa,Yang, Yuanyong,Zhao, Yonglong,Zhang, Lin
-
-
- An Enantioconvergent Benzylic Hydroxylation Using a Chiral Aryl Iodide in a Dual Activation Mode
-
The application of a triazole-substituted chiral iodoarene in a direct enantioselective hydroxylation of alkyl arenes is reported. This method allows the rapid synthesis of chiral benzyl alcohols in high yields and stereocontrol, despite its nontemplated nature. In a cascade activation consisting of an initial irradiation-induced radical C-H-bromination and a consecutive enantioconvergent hydroxylation, the iodoarene catalyst has a dual role. It initiates the radical bromination in its oxidized state through an in-situ-formed bromoiodane and in the second, Cu-catalyzed step, it acts as a chiral ligand. This work demonstrates the ability of a chiral aryl iodide catalyst acting both as an oxidant and as a chiral ligand in a highly enantioselective C-H-activating transformation. Furthermore, this concept presents an enantioconvergent hydroxylation with high selectivity using a synthetic catalyst.
- Abazid, Ayham H.,Clamor, Nils,Nachtsheim, Boris J.
-
p. 8042 - 8048
(2020/09/21)
-
- C1-Symmetric PNP Ligands for Manganese-Catalyzed Enantioselective Hydrogenation of Ketones: Reaction Scope and Enantioinduction Model
-
A family of ferrocene-based chiral PNP ligands is reported. These tridentate ligands were successfully applied in Mn-catalyzed asymmetric hydrogenation of ketones, giving high enantioselectivities (92%~99% ee for aryl alkyl ketones) as well as high efficiencies (TON up to 2000). In addition, dialkyl ketones could also be hydrogenated smoothly. Manganese intermediates that might be involved in the catalytic cycle were analyzed. DFT calculation was carried out to help understand the chiral induction model. The Mn/PNP catalyst could discriminate two groups with different steric properties by deformation of the phosphine moiety in the flexible 5-membered ring.
- Zeng, Liyao,Yang, Huaxin,Zhao, Menglong,Wen, Jialin,Tucker, James H. R.,Zhang, Xumu
-
p. 13794 - 13799
(2020/11/30)
-
- Efficient Asymmetric Synthesis of Ethyl (S)-4-Chloro-3-hydroxybutyrate Using Alcohol Dehydrogenase SmADH31 with High Tolerance of Substrate and Product in a Monophasic Aqueous System
-
Bioreductions catalyzed by alcohol dehydrogenases (ADHs) play an important role in the synthesis of chiral alcohols. However, the synthesis of ethyl (S)-4-chloro-3-hydroxybutyrate [(S)-CHBE], an important drug intermediate, has significant challenges concerning high substrate or product inhibition toward ADHs, which complicates its production. Herein, we evaluated a novel ADH, SmADH31, obtained from the Stenotrophomonas maltophilia genome, which can tolerate extremely high concentrations (6 M) of both substrate and product. The coexpression of SmADH31 and glucose dehydrogenase from Bacillus subtilis in Escherichia coli meant that as much as 660 g L-1 (4.0 M) ethyl 4-chloroacetoacetate was completely converted into (S)-CHBE in a monophasic aqueous system with a >99.9% ee value and a high space-time yield (2664 g L-1 d-1). Molecular dynamics simulation shed light on the high activity and stereoselectivity of SmADH31. Moreover, five other optically pure chiral alcohols were synthesized at high concentrations (100-462 g L-1) as a result of the broad substrate spectrum of SmADH31. All these compounds act as important drug intermediates, demonstrating the industrial potential of SmADH31-mediated bioreductions.
- Chen, Rong,Liu, Qinghai,Wang, Hualei,Wei, Dongzhi,Xie, Youyu,Yang, Zeyu,Ye, Wenjie
-
p. 1068 - 1076
(2020/07/06)
-
- Heteroditopic Ru(II)-And Ir(III)-NHC Complexes with Pendant 1,2,3-Triazole/Triazolylidene Groups: Stereoelectronic Impact on Transfer Hydrogenation of Unsaturated Compounds
-
Imidazol-2-ylidene (ImNHC) and 1,2,3-Traizol-5-ylidene (tzNHC) have been established as important classes of carbene ligands in homogeneous catalysis. To develop Ru(II)/Ir(III) complexes based on these ligand systems considering their electronic as well as steric profiles for hydride transfer reactions, we employed chelating ligands featuring combinations of ImNHC and triazole-N or mesoionic tzNHC donors bridged by a CH2 spacer with possible modifications at triazole backbone. In general, synthesized Ru(II) complexes were found to perform significantly better than analogous Ir(III) complexes in ketone and aldimine reduction. Among the Ru(II) complexes, electron-rich complexes 8/9 of the general formula [(p-cymene)(ImNHC-CH2-TzNHC)RuII(Cl)]BF4 with two different carbene donors (ImNHC and tzNHC) were found to perform appreciably better in ketone reduction than analogous complexes with a combination of ImNHC and triazole-N-donor ([(p-cymene)(ImNHC-CH2-Tz-N)RuII(Cl)]BF4; 4) explaining the electronic fine-Tuning of the catalytic systems. No appreciable variation in activity was observed between complexes 8 and 9 having almost similar electronic profiles. However, less bulky Ru(II) complex 9 with a triazole N-phenyl substituent is more suitable for aldimine reduction than is complex 8, having a triazole N-3,5-dimethylphenyl substituent that explains the steric influence in addition to electronic effect on the reduction process.
- Illam, Praseetha Mathoor,Donthireddy,Chakrabartty, Sayantan,Rit, Arnab
-
supporting information
p. 2610 - 2623
(2019/07/31)
-
- Phosphine-NHC Manganese Hydrogenation Catalyst Exhibiting a Non-Classical Metal-Ligand Cooperative H2 Activation Mode
-
Deprotonation of the MnI NHC-phosphine complex fac-[MnBr(CO)3(κ2P,C-Ph2PCH2NHC)] (2) under a H2 atmosphere readily gives the hydride fac-[MnH(CO)3(κ2P,C-Ph2PCH2NHC)] (3) via the intermediacy of the highly reactive 18-e NHC-phosphinomethanide complex fac-[Mn(CO)3(κ3P,C,C-Ph2PCHNHC)] (6 a). DFT calculations revealed that the preferred reaction mechanism involves the unsaturated 16-e mangana-substituted phosphonium ylide complex fac-[Mn(CO)3(κ2P,C-Ph2P=CHNHC)] (6 b) as key intermediate able to activate H2 via a non-classical mode of metal-ligand cooperation implying a formal λ5-P–λ3-P phosphorus valence change. Complex 2 is shown to be one of the most efficient pre-catalysts for ketone hydrogenation in the MnI series reported to date (TON up to 6200).
- Buhaibeh, Ruqaya,Filippov, Oleg A.,Bruneau-Voisine, Antoine,Willot, Jérémy,Duhayon, Carine,Valyaev, Dmitry A.,Lugan, No?l,Canac, Yves,Sortais, Jean-Baptiste
-
supporting information
p. 6727 - 6731
(2019/04/17)
-
- β-Amino Phosphine Mn Catalysts for 1,4-Transfer Hydrogenation of Chalcones and Allylic Alcohol Isomerization
-
Mn complexes with amino acid derived PN ligands were used in the catalytic transfer hydrogenation (TH) of ketone and chalcone substrates in 2-propanol with mild heating. Moreover, chalcones are reduced selectively to the saturated ketone at short times and can be fully converted to the alcohol when reactions are prolonged. The mechanism of chalcone reduction was briefly considered. Allylic alcohols are not reactive in 2-propanol, but quantitative isomerization occurs in toluene. Thus, we suspect that the allylic alcohols are dehydrogenated and the resulting ketone is formed through a direct 1,4-hydrogenation of the chalcone. Finally, several other related ligands that have been used in Mn-based TH reactions were explored to test the viability of ligand design in favoring chemoselectivity. The β-amino phosphine ligands proved most effective in this regard.
- Vigneswaran, Vipulan,MacMillan, Samantha N.,Lacy, David C.
-
supporting information
p. 4387 - 4391
(2019/11/14)
-
- Lithium triethylborohydride as catalyst for solvent-free hydroboration of aldehydes and ketones
-
Commercially available and inexpensive lithium triethylborohydride (LiHBEt3) acts as efficient catalyst for the solvent-free hydroboration of a wide range of aldehydes and ketones, which were subsequently transformed to corresponding 1° and 2° alcohols in one-pot procedure at room temperature (rt).
- Kuciński, Krzysztof,Hreczycho, Grzegorz
-
p. 1912 - 1915
(2019/04/27)
-
- A Practical and Stereoselective In Situ NHC-Cobalt Catalytic System for Hydrogenation of Ketones and Aldehydes
-
Homogeneous catalytic hydrogenation of carbonyl groups is a synthetically useful and widely applied organic transformation. Sustainable chemistry goals require replacing conventional noble transition metal catalysts for hydrogenation by earth-abundant base metals. Herein, we report how a practical in situ catalytic system generated by easily available pincer NHC precursors, CoCl2, and a base enabled efficient and high-yielding hydrogenation of a broad range of ketones and aldehydes (over 50 examples and a maximum turnover number [TON] of 2,610). This is the first example of NHC-Co-catalyzed hydrogenation of C=O bonds using flexible pincer NHC ligands consisting of a N-H substructure. Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized by fine-tuning of the steric bulk of pincer NHC ligands. Additionally, a bis(NHCs)-Co complex was successfully isolated and fully characterized, and it exhibits excellent catalytic activity that equals that of the in-situ-formed catalytic system. Catalytic hydrogenation is a powerful tool for the reduction of organic compounds in both fine and bulk chemical industries. To improve sustainability, more ecofriendly, inexpensive, and earth-abundant base metals should be employed to replace the precious metals that currently dominate the development of hydrogenation catalysts. However, the majority of the base-metal catalysts that have been reported involve expensive, complex, and often air- and moisture-sensitive phosphine ligands, impeding their widespread application. From a mixture of the stable CoCl2, imidazole salts, and a base, our newly developed catalytic system that formed easily in situ enables efficient and stereoselective hydrogenation of C=O bonds. We anticipate that this easily accessible catalytic system will create opportunities for the design of practical base-metal hydrogenation catalysts. A practical in situ catalytic system generated by a mixture of easily available pincer NHC precursors, CoCl2, and a base enabled highly efficient hydrogenation of a broad range of ketones and aldehydes (over 50 examples and up to a turnover number [TON] of 2,610). Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized in high selectivities. Moreover, the preparation of a well-defined bis(NHCs)-Co complex via this pincer NHC ligand consisting of a N-H substructure was successful, and it exhibits equally excellent catalytic activity for the hydrogenation of C=O bonds.
- Zhong, Rui,Wei, Zeyuan,Zhang, Wei,Liu, Shun,Liu, Qiang
-
supporting information
p. 1552 - 1566
(2019/06/14)
-
- Ruthenium complexes with PYA pincer ligands for catalytic transfer hydrogenation of challenging substrates
-
Here we highlight the potential of a series of ruthenium complexes with tridentate N,N,N pincer-type ligands featuring two pyridylidene amide (PYA) moieties in the ligand skeleton. They were successfully applied in transfer hydrogenation of ketones and C=C double bonds. Rational ligand design was key for increasing the catalytic performance in the reduction of challenging substrates such as potentially chelating acetylpyridines. The specific reaction profiles indicate catalyst poisoning via imine coordination as well as N,O-bidentate coordination of the substrate or the product. Approaches to mitigate this inhibition are presented. Furthermore, these PYA pincer ruthenium complexes accomplish the selective reduction of the C=C over C=O bond of α,β-unsaturated ketones such as benzylideneacetone, while other α,β-unsaturated ketones such as trans-chalcone predominantly underwent oxidative C=C bond cleavage.
- Melle, Philipp,Albrecht, Martin
-
p. 299 - 303
(2019/07/08)
-
- Manganese Catalyzed Asymmetric Transfer Hydrogenation of Ketones Using Chiral Oxamide Ligands
-
The asymmetric transfer hydrogenation of ketones using isopropyl alcohol (IPA) as hydrogen donor in the presence of novel manganese catalysts is explored. The selective and active systems are easily generated in situ from [MnBr(CO)5] and inexpensive C2-symmeric bisoxalamide ligands. Under the optimized reaction conditions, the Mn-derived catalyst gave higher enantioselectivity compared with the related ruthenium catalyst.
- Schneek?nig, Jacob,Junge, Kathrin,Beller, Matthias
-
supporting information
p. 503 - 507
(2019/02/26)
-
- Ruthenium(II)-Chitosan, an Enantioselective Catalyst for the Transfer Hydrogenation of N-Heterocyclic Ketones
-
The present study aimed at extending the applicability of a recently developed stereoselective catalytic system to the preparation of optically enriched N-heterocyclic alcohols. Chiral ruthenium catalyst formed in situ using the chitosan biopolymer as ligand, which provided good results in the transfer hydrogenation of heterobicyclic compounds, such as 4-chromanone and 4-thiochromanone, was used in reactions of various N-containing prochiral ketones. High enantioselectivities were reached in transfer hydrogenations of bicyclic compounds bearing nitrogen either in aromatic or cycloaliphatic moieties, provided that the amino group was protected or shielded by a nearby substituent. Results were rationalized by interactions of the nitrogen with the metal and/or ligand. N-containing bicyclic compounds having heteroatoms in both rings were also prepared and tested. The detrimental effect of the pyridyl moiety was compensated by the beneficial influence of the heteroatom in the cycloaliphatic ring, as indicated by high rates and good enantioselectivities obtained in reactions of these compounds. Preparation of several N-heterocyclic alcohols, in good yields and high optical purities was achieved using Ru(II)-chitosan complex.
- Kolcsár, Vanessza Judit,Fül?p, Ferenc,Sz?ll?si, Gy?rgy
-
p. 2725 - 2731
(2019/05/24)
-
- Enhanced activity and modified substrate-favoritism of Burkholderia cepacia lipase by the treatment with a pyridinium alkyl-PEG sulfate ionic liquid
-
Three types of pyridinium salts, i.e., 1-ethylpyridin-1-ium cetyl-PEG10 sulfate (PYET), 1-butylpyridin-1-ium cetyl-PEG10 sulfate (PYBU), and 1-(3-methoxypropyl)pyridin-1-ium cetyl-PEG10 sulfate (PYMP), have been prepared and evaluated for their activation property of Burkholderia cepacia lipase by comparison to the control IL-coated enzymes, 1-butyl-2,3-dimethylimidazolium cetyl-PEG10 sulfate-coated lipase PS (IL1-PS). Among the tested pyridinium salt-coated lipases, the PYET-coated lipase PS (PYET-PS) exhibited the best results; the transesterification of 1-(pyridin-2-yl)ethanol, 1-(pyridin-3-yl)ethanol, 1-(pyridin-4-yl)ethanol, or 4-phenylbut-3-en-2-ol proceeded faster than those of the IL1-PS-catalyzed reaction while maintaining an excellent enantioselectivity (E > 200). This improved efficiency was found to be dependent on the increased Kcat value.
- Kadotani, Shiho,Nokami, Toshiki,Itoh, Toshiyuki
-
p. 441 - 447
(2019/01/04)
-
- Modular Pincer-type Pyridylidene Amide Ruthenium(II) Complexes for Efficient Transfer Hydrogenation Catalysis
-
A set of bench-stable ruthenium complexes with new N,N,N-tridentate coordinating pincer-type pyridyl-bis(pyridylideneamide) ligands was synthesized in excellent yields, with the pyridylidene amide in meta or in para position (m-PYA and p-PYA, respectively). While complex [Ru(p-PYA)(MeCN)3]2+ is catalytically silent in transfer hydrogenation, its meta isomer [Ru(m-PYA)(MeCN)3]2+ shows considerable activity with turnover frequencies at 50% conversion TOF50 = 100 h-1. Spectroscopic, electrochemical, and crystallographic analyses suggest considerably stronger donor properties of the zwitterionic m-PYA ligand compared to the partially π-acidic p-PYA analogue, imparted by valence isomerization. Further catalyst optimization was achieved by exchanging the ancillary MeCN ligands with imines (4-picoline), amines (ethylenediamine), and phosphines (PPh3, dppm, dppe). The most active catalyst was comprised of the m-PYA pincer ligand and PPh3, complex [Ru(m-PYA)(PPh3)(MeCN)2]2+, which reached a TOF50 of 430 h-1 under aerobic conditions and up to 4000 h-1 in the absence of oxygen. The presence of oxygen reversibly deactivates the catalytically active species, which compromises activity, but not longevity of the catalyst. Ligand exchange kinetic studies by NMR spectroscopy indicate that the strong trans effect of the phosphine is critical for high catalyst activity. Diaryl, aryl-alkyl, and dialkyl ketones were hydrogenated with high conversion, and α,β-unsaturated ketones produced selectively the saturated ketone as the only product due to exclusive C=C bond hydrogenation, a distinctly different selectivity from most other transfer hydrogenation catalysts.
- Melle, Philipp,Manoharan, Yanisha,Albrecht, Martin
-
p. 11761 - 11774
(2018/09/21)
-
- Effect of Ancillary Ligand in Cyclometalated Ru(II)-NHC-Catalyzed Transfer Hydrogenation of Unsaturated Compounds
-
In an effort to develop efficient Ru(II)-NHC-based catalyst considering their stereoelectronic effect for hydride-transfer reaction, we found that the ancillary NHC ligand can play a significant role in its catalytic performance. This effect is demonstrated by comparing the activity of two different types of orthometalated precatalysts of general formula [(p-cymene)(NHC)RuII(X)] (NHC = an imidazolylidene-based ImNHC, compound 2a-c, or a mesoionic triazolylidene-based tzNHC, compound 4) in transfer hydrogenation of carbonyl substrates. The electron-rich precatalyst, 2c, containing p-OMe-substituted NHC ligand performed significantly better than both unsubstituted complex 2a and p-CF3 substituted electron-poor complex 2b in ketone reduction. Whereas bulky mesoionic triazolylidene ligand containing complex 4 was found to be superior catalyst for aldehyde reduction and the precatalyst 2a is more suitable for the selective transfer hydrogenation of a wide range of aromatic aldimines to amines. To the best of our knowledge, this is the first systematic study on the effect of stereoelectronic tuning of ancillary orthometalated NHC ligand in Ru(II)-catalyzed transfer hydrogenations of various types of unsaturated compounds with broad substrate scope.
- Bauri, Somnath,Donthireddy,Illam, Praseetha Mathoor,Rit, Arnab
-
supporting information
p. 14582 - 14593
(2018/11/25)
-
- Hydroclassified Combinatorial Saturation Mutagenesis: Reshaping Substrate Binding Pockets of KpADH for Enantioselective Reduction of Bulky-Bulky Ketones
-
A hydroclassified combinatorial saturation mutagenesis (HCSM) strategy was proposed for reshaping the substrate binding pocket by dividing 20 amino acids into four groups based on their hydrophobicity and size. These smart HCSM libraries could significantly reduce screening effort especially for the simultaneous mutagenesis of three or more residues and lacking high throughput screening methods. Employing HCSM strategy, the stereoselectivity of KpADH, an alcohol dehydrogenase from Kluyveromyces polysporus, was efficiently improved to 99.4% ee. (4-Chlorophenyl)(pyridin-2-yl)methanone (CPMK), generally regarded as a "hard-to-reduce" ketone, was used as a model substrate, and its corresponding chiral alcohol products could be utilized as antihistamine precursors. The best variant 50C10 displayed higher binding affinity and catalytic efficiency toward CPMK with KM/kcat of 59.3 s-1·mM-1, 3.51-fold that of KpADH. Based on MD simulations, increased difference between two binding pockets, enhanced hydrophobicity, and π-π and halogen-alkyl interactions were proposed to favor the enantioselective recognition and substrate binding in 50C10. Substrate spectrum analysis revealed that 50C10 exhibited improved enantioselectivity toward diaryl ketones especially with halo- or other electron-withdrawing groups. As much as 500 mM CPMK could be asymmetrically reduced into chiral diaryl alcohols with ee of 99.4% and a space-time yield of 194 g·L-1·d-1 without addition of external NADP+. This study provides an effective mutagenesis strategy for the protein engineering of substrate specificity and enantioselectivity.
- Xu, Guo-Chao,Wang, Yue,Tang, Ming-Hui,Zhou, Jie-Yu,Zhao, Jing,Han, Rui-Zhi,Ni, Ye
-
p. 8336 - 8345
(2018/09/18)
-
- Photoinduced Electron Transfer (PET)-Mediated Fragmentation of Picolinium-Derived Redox Probes
-
The photolysis of covalently linked N-alkyl picolinium phenylacetate—carbazole dyads was analyzed experimentally and by using density functional theory (DFT) and time dependent-DFT (TD-DFT) calculations. In contrast to earlier observations efficient one and two-photon fragmentations conditions were found for 15 c (δu=0.16 GM at 730 nm) opening the way for the design of a novel class of “caged” compounds.
- Dunkel, Petra,Barosi, Anna,Dhimane, Hamid,Maurel, Fran?ois,Dalko, Peter I.
-
p. 12920 - 12931
(2018/08/11)
-
- Enhanced Catalytic Activity of Iridium(III) Complexes by Facile Modification of C,N-Bidentate Chelating Pyridylideneamide Ligands
-
A set of aryl-substituted pyridylideneamide (PYA) ligands with variable donor properties owing to a pronounced zwitterionic and a neutral diene-type resonance structure were used as electronically flexible ligands at a pentamethylcyclopentadienyl (Cp) iridium center. The straightforward synthesis of this type of ligand allows for an easy incorporation of donor substituents such as methoxy groups in different positions of the phenyl ring of the C,N-bidentate chelating PYA. These modifications considerably enhance the catalytic activity of the coordinated iridium center toward the catalytic aerobic transfer hydrogenation of carbonyls and imines as well as the hydrosilylation of phenylacetylene. Moreover, these PYA iridium complexes catalyze the base-free transfer hydrogenation of aldehydes, and to a lesser extent also of ketones. Under standard transfer hydrogenation conditions including base, aldehydes are rapidly oxidized to carboxylic acids rather than reduced to the corresponding alcohol, as is observed under base-free conditions.
- Navarro, Miquel,Smith, Christene A.,Albrecht, Martin
-
p. 11688 - 11701
(2017/10/10)
-
- Hydrogenation of ketones with a manganese PN3P pincer pre-catalyst
-
A catalytic hydrogenation of carbonyl derivatives with a manganese pre-catalyst has been developed. The key feature is the use of an air stable cationic manganese pre-catalyst bearing a tridendate ligand with a 2,6-(diaminopyridinyl)diphosphine scaffold. Under 50?bar of H2, at 130?°C, various ketones were reduced to the corresponding alcohols with moderate to good yield.
- Bruneau-Voisine, Antoine,Wang, Ding,Roisnel, Thierry,Darcel, Christophe,Sortais, Jean-Baptiste
-
-
- Transfer Hydrogenation of Carbonyl Derivatives Catalyzed by an Inexpensive Phosphine-Free Manganese Precatalyst
-
A very simple and inexpensive catalytic system based on abundant manganese as transition metal and on an inexpensive phosphine-free bidendate ligand, 2-(aminomethyl)pyridine, has been developed for the reduction of a large variety of carbonyl derivatives with 2-propanol as hydrogen donor. Remarkably, the reaction proceeds at room temperature with low catalyst loading (down to 0.1 mol %) and exhibits a good tolerance toward functional groups. High TON (2000) and TOF (3600 h-1) were obtained.
- Bruneau-Voisine, Antoine,Wang, Ding,Dorcet, Vincent,Roisnel, Thierry,Darcel, Christophe,Sortais, Jean-Baptiste
-
supporting information
p. 3656 - 3659
(2017/07/15)
-
- Triazolylidene Iridium Complexes for Highly Efficient and Versatile Transfer Hydrogenation of C=O, C=N, and C=C Bonds and for Acceptorless Alcohol Oxidation
-
A set of iridium(I) and iridium(III) complexes is reported with triazolylidene ligands that contain pendant benzoxazole, thiazole, and methyl ether groups as potentially chelating donor sites. The bonding mode of these groups was identified by NMR spectroscopy and X-ray structure analysis. The complexes were evaluated as catalyst precursors in transfer hydrogenation and in acceptorless alcohol oxidation. High-valent iridium(III) complexes were identified as the most active precursors for the oxidative alcohol dehydrogenation, while a low-valent iridium(I) complex with a methyl ether functionality was most active in reductive transfer hydrogenation. This catalyst precursor is highly versatile and efficiently hydrogenates ketones, aldehydes, imines, allylic alcohols, and most notably also unpolarized olefins, a notoriously difficult substrate for transfer hydrogenation. Turnover frequencies up to 260 h-1 were recorded for olefin hydrogenation, whereas hydrogen transfer to ketones and aldehydes reached maximum turnover frequencies greater than 2000 h-1. Mechanistic investigations using a combination of isotope labeling experiments, kinetic isotope effect measurements, and Hammett parameter correlations indicate that the turnover-limiting step is hydride transfer from the metal to the substrate in transfer hydrogenation, while in alcohol dehydrogenation, the limiting step is substrate coordination to the metal center.
- Mazloomi, Zahra,Pretorius, René,Pàmies, Oscar,Albrecht, Martin,Diéguez, Montserrat
-
p. 11282 - 11298
(2017/09/25)
-
- Remarkably improved stability and enhanced activity of a: Burkholderia cepacia lipase by coating with a triazolium alkyl-PEG sulfate ionic liquid
-
Three types of triazolium cetyl-PEG10 sulfate ionic liquid were synthesized and their activation of Burkholderia cepacia lipase was investigated; both the reaction rate and enantioselectivity depended on the cationic part of the coating ILs and 1-butyl-3-methyl-1,2,3-triazolium cetyl-PEG10 sulfate (Tz1)-coated lipase PS, which is especially suitable for the transesterification of 1-(pyridin-2-yl)ethanol, 1-(pyridin-3-yl)ethanol, and 1-(pyridin-4-yl)ethanol, among 12 types of tested secondary alcohol. The most important result was obtained when these enzymes were stored in an IL ([N221MEM][Tf2N]) solvent: Tz1-PS showed an amazing stability and it exhibited an excellent activity after 2 years when the enzyme was stored in [N221MEM][Tf2N].
- Nishihara,Shiomi,Kadotani,Nokami,Itoh
-
supporting information
p. 5250 - 5256
(2017/11/09)
-
- Iridium-Catalyzed Asymmetric Hydrogenation of Ketones with Accessible and Modular Ferrocene-Based Amino-phosphine Acid (f-Ampha) Ligands
-
A series of tridentate ferrocene-based amino-phosphine acid (f-Ampha) ligands have been successfully developed. The f-Ampha ligands are extremely air stable and exhibited excellent performance in the Ir-catalyzed asymmetric hydrogenation of ketones (full conversions, up to >99% ee, and 500?000 TON). DFT calculations were performed to elucidate the reaction mechanism and the importance of the COOH group. Control experiments also revealed that the COOH group played a key role in this reaction.
- Yu, Jianfei,Long, Jiao,Yang, Yuhong,Wu, Weilong,Xue, Peng,Chung, Lung Wa,Dong, Xiu-Qin,Zhang, Xumu
-
supporting information
p. 690 - 693
(2017/02/10)
-
- One-pot synthesis of (R)-1-(pyridin-4-yl)ethyl acetate using tandem catalyst prepared by co-immobilization of palladium and lipase on mesoporous foam: Optimization and kinetic modeling
-
The synthesis of (R)-1-(pyridin-4-yl)ethyl acetate was achieved over tandem palladium-lipase catalyst with 100% selectivity using 4-acetyl pyridine as a reactant. The 2% w/w palladium and lipase catalyst was successfully co-immobilized in the microenvironment of the mesocellular foam and characterized by various techniques. The palladium metal from catalyst hydrogenated 4-acetyl pyridine to form 1-(pyridin-4-yl)ethanol. The generated intermediate product then underwent kinetic resolution over lipase and selectively gave (R)-1-(pyridin-4- yl)ethyl acetate. The catalytic conditions were then studied for optimal performance of both steps. The reaction conditions were optimized to 50?°C and toluene as a solvent. Both chemical and enzymatic kinetic models of the reaction were developed for a given set of reaction conditions and kinetic parameters were predicted. At optimal conditions, the obtained selectivity of intermediate (1-(pyridin-4-yl)ethanol) was 51.38%. The final product yield of ((R)-1-(pyridin-4-yl)ethyl acetate) was 48.62%.
- Magadum, Deepali B.,Yadav, Ganapati D.
-
p. 811 - 823
(2017/10/09)
-
- Stable and Inert Cobalt Catalysts for Highly Selective and Practical Hydrogenation of C≡N and C=O Bonds
-
Novel heterogeneous cobalt-based catalysts have been prepared by pyrolysis of cobalt complexes with nitrogen ligands on different inorganic supports. The activity and selectivity of the resulting materials in the hydrogenation of nitriles and carbonyl compounds is strongly influenced by the modification of the support and the nitrogen-containing ligand. The optimal catalyst system ([Co(OAc)2/Phenα-Al2O3]-800 = Cat. E) allows for efficient reduction of both aromatic and aliphatic nitriles including industrially relevant dinitriles to primary amines under mild conditions. The generality and practicability of this system is further demonstrated in the hydrogenation of diverse aliphatic, aromatic, and heterocyclic ketones as well as aldehydes, which are readily reduced to the corresponding alcohols.
- Chen, Feng,Topf, Christoph,Radnik, J?rg,Kreyenschulte, Carsten,Lund, Henrik,Schneider, Matthias,Surkus, Annette-Enrica,He, Lin,Junge, Kathrin,Beller, Matthias
-
supporting information
p. 8781 - 8788
(2016/08/02)
-
- Third-Generation Amino Acid Furanoside-Based Ligands from d-Mannose for the Asymmetric Transfer Hydrogenation of Ketones: Catalysts with an Exceptionally Wide Substrate Scope
-
A modular ligand library of α-amino acid hydroxyamides and thioamides was prepared from 10 different N-tert-butyloxycarbonyl-protected α-amino acids and three different amino alcohols derived from 2,3-O-isopropylidene-α-d-mannofuranoside. The ligand library was evaluated in the half-sandwich ruthenium- and rhodium-catalyzed asymmetric transfer hydrogenation of a wide array of ketone substrates, including simple as well as sterically demanding aryl alkyl ketones, aryl fluoroalkyl ketones, heteroaromatic alkyl ketones, aliphatic, conjugated and propargylic ketones. Under the optimized reaction conditions, secondary alcohols were obtained in high yields and in enantioselectivities up to >99%. The choice of ligand/catalyst allowed for the generation of both enantiomers of the secondary alcohols, where the ruthenium-hydroxyamide and the rhodium-thioamide catalysts act complementarily towards each other. The catalytic systems were also evaluated in the tandem isomerization/asymmetric transfer hydrogenation of racemic allylic alcohols to yield enantiomerically enriched saturated secondary alcohols in up to 98% ee. Furthermore, the catalytic tandem α-alkylation/asymmetric transfer hydrogenation of acetophenones and 3-acetylpyridine with primary alcohols as alkylating and reducing agents was studied. Secondary alcohols containing an elongated alkyl chain were obtained in up to 92% ee. (Figure presented.).
- Margalef, Jèssica,Slagbrand, Tove,Tinnis, Fredrik,Adolfsson, Hans,Diéguez, Montserrat,Pàmies, Oscar
-
p. 4006 - 4018
(2016/12/30)
-
- Synthesis of enantiopure epoxide by 'one pot' chemoenzymatic approach using a highly enantioselective dehydrogenase
-
Enantiopure α-phenethyl alcohols, including aromatic halohydrins, are important chiral building blocks. One of the best approaches to synthesise α-phenethyl alcohols is asymmetric reduction of prochiral ketones by alcohol dehydrogenases (ADHs). The obtained enantiopure halohydrin could be directly used to produce enantiopure epoxide through a base-induced ring-closure reaction, which is an attractive 'one pot' chemoenzymatic method for producing high-yield epoxide. In this study, a novel medium-chain dehydrogenase (KcDH) from Kuraishia capsulate CBS1993 was identified and characterised to show its broad substrate scope and excellent enantioselectivity. KcDH showed activities on 25 substrates of the 26 tested aromatic ketones and heteroaryl ketones, with an enantiomeric excess (ee) >99% and the highest relative activity observed with para-nitro acetophenone. Due to its high enantioselectivity for α-haloketones, a chemoenzymatic method for the synthesis of enantiopure styrene oxide (SO) and phenyl glycidyl ether (PGE) was developed through a base-induced ring-closure reaction on enantiopure halohydrin obtained with KcDH. (R)-SO and (S)-PGE were obtained in 86% and 94% analytical yield, respectively, and both epoxides were obtained with ee >99%. Thus, our results suggested that KcDH may be a promising biocatalyst for the production of multiple enantiopure α-phenethyl alcohols and epoxides.
- Wu, Kai,Chen, Lifeng,Fan, Haiyang,Zhao, Zhiqiang,Wang, Hualei,Wei, Dongzhi
-
p. 899 - 904
(2016/02/05)
-
- Development of Large-Scale Routes to Potent GPR119 Receptor Agonists
-
Practical and scalable syntheses were developed that were used to prepare multikilogram batches of GSK1292263A (1) and GSK2041706A (15), two potent G protein-coupled receptor 119 (GPR119) agonists. Both syntheses employed relatively cheap and readily avai
- Matsuoka, Richard T.,Boros, Eric E.,Brown, Andrew D.,Bullock, Kae M.,Canoy, Will L.,Carpenter, Andrew J.,Cobb, Jeremy D.,Condon, Shannon E.,Deschamps, Nicole M.,Elitzin, Vassil I.,Erickson, Greg,Fang, Jing M.,Igo, David H.,Joshi, Biren K.,Kaldor, Istvan W.,Mitchell, Mark B.,Peckham, Gregory E.,Reynolds, Daniel W.,Salmon, Matthew C.,Sharp, Matthew J.,Tabet, Elie A.,Toczko, Jennifer F.,Wu, Lianming Michael,Zhou, Xiao-Ming M.
-
p. 1469 - 1475
(2016/08/30)
-
- Enantioselective borane reduction of ketones catalyzed by tricyclic 1,3,2-oxazaborolidines
-
Two novel tricyclic 1,3,2-oxazaborolidines were synthesized in seven steps from methyl Boc-l-pyroglutamate. They are characterized by an ortho- and peri-fused 5/5/6-ring system with the B-N bond forming one ring junction. In the asymmetric borane reduction of ketones, the B-alkoxy bridged derivative permits excellent enantioselectivities of up to 98% ee and its activity is comparable to that of the standard CBS catalyst. The closely related, B-alkyl bridged derivative is less enantioselective and less active, as determined by competition experiments.
- Kaldun, Johannes,Krimalowski, Alexander,Breuning, Matthias
-
supporting information
p. 2492 - 2495
(2016/05/24)
-
- I86A/C295A mutant secondary alcohol dehydrogenase from Thermoanaerobacter ethanolicus has broadened substrate specificity for aryl ketones
-
Thermoanaerobacter ethanolicus secondary alcohol dehydrogenase (SADH) reduces aliphatic ketones according to Prelog's Rule, with binding pockets for small and large substituents. It was shown previously that the I86A mutant SADH reduces acetophenone, which is not a substrate of wild-type SADH, to give the anti-Prelog R-product (Musa, M. M.; Lott, N.; Laivenieks, M.; Watanabe, L.; Vieille, C.; Phillips, R. S. ChemCatChem 2009, 1, 89–93.). However, I86A SADH did not reduce aryl ketones with substituents larger than fluorine. We have now expanded the small pocket of the active site of I86A SADH by mutation of Cys-295 to alanine to allow reaction of substituted acetophenones. As predicted, the double mutant I86A/C295A SADH has broadened substrate specificity for meta-substituted, but not para-substituted, acetophenones. However, the increase of the substrate specificity of I86A/C295A SADH is accompanied by a decrease in the kcat/Km values of acetophenones, possibly due to the substrates fitting loosely inside the more open active site. Nevertheless, I86A/C295A SADH gives high conversions and very high enantiomeric excess of the anti-Prelog R-alcohols from the tested substrates.
- Nealon, Christopher M.,Welsh, Travis P.,Kim, Chang Sup,Phillips, Robert S.
-
p. 151 - 156
(2016/08/15)
-
- Iron(II)/(NH)2P2 Macrocycles: Modular, Highly Enantioselective Transfer Hydrogenation Catalysts
-
A generalized protocol for the synthesis of chiral (NH)2P2 macrocycles allows changing the linker between the phosphines and gives access to a family of such ligands, as demonstrated for the propane-1,3-diyl analogue. The corresponding complexes based on earth-abundant and nontoxic iron were applied as catalysts in the asymmetric transfer hydrogenation of polar double bonds. Thanks to the ligand modularity and to the use of tunable isonitriles as ancillary ligands, the catalyst system can be individually optimized for each substrate to give high enantioselectivity (up to 99.9% conversion and 99.6% ee, TOF up to >3950 h-1) for a broad scope of 26 substrates.
- Bigler, Raphael,Huber, Raffael,St?ckli, Marco,Mezzetti, Antonio
-
p. 6455 - 6464
(2016/10/18)
-
- Mechanochemical Enzymatic Kinetic Resolution of Secondary Alcohols under Ball-Milling Conditions
-
Mechanosynthesis is a valuable technique, offering attractive alternatives for the preparation of organic, inorganic, and organometallic products. Surprisingly, mechanochemical enzymatic transformations have only scarcely been studied until now. Here, we demonstrate the use of lipase B from Candida antarctica (CALB) in acylative kinetic resolutions of secondary alcohols in mixer and planetary mills. Despite the mechanical stress caused by the high-speed ball milling, the biocatalyst proved highly effective, stable, and, in part, recyclable under the applied mechanochemical conditions. Best milling practice: The compatibility of lipase B from Candida antarctica (CALB) in acylative kinetic resolutions of secondary alcohols in mixer and planetary mills has been explored. Despite the mechanical stress caused by the high-speed ball milling, the biocatalyst was found to be very effective, stable, and, in part, recyclable under the applied mechanochemical conditions.
- Hernández, José G.,Frings, Marcus,Bolm, Carsten
-
p. 1769 - 1772
(2016/06/01)
-
- A monolith immobilised iridium Cp catalyst for hydrogen transfer reactions under flow conditions
-
An immobilised iridium hydrogen transfer catalyst has been developed for use in flow based processing by incorporation of a ligand into a porous polymeric monolithic flow reactor. The monolithic construct has been used for several redox reductions demonstrating excellent recyclability, good turnover numbers and high chemical stability giving negligible metal leaching over extended periods of use.
- Rojo, Maria Victoria,Guetzoyan, Lucie,Baxendale, Ian. R.
-
p. 1768 - 1777
(2015/02/19)
-
- Iron-Catalyzed α-Alkylation of Ketones with Alcohols
-
A general and benign iron-catalyzed α-alkylation reaction of ketones with primary alcohols has been developed. The key to success of the reaction is the use of a Kn?lker-type complex as catalyst (2 mol %) in the presence of Cs2CO3 as base (10 mol %) under hydrogen-borrowing conditions. Using 2-aminobenzyl alcohol as alkylation reagent allows for the "green" synthesis of quinoline derivatives.
- Elangovan, Saravanakumar,Sortais, Jean-Baptiste,Beller, Matthias,Darcel, Christophe
-
supporting information
p. 14483 - 14486
(2016/01/25)
-
- Kinetic resolution of secondary alcohols with Burkholderia cepacia lipase immobilized on a biodegradable ternary blend polymer matrix as a highly efficient and heterogeneous recyclable biocatalyst
-
The present work reports a highly efficient and biocatalytic heterogeneous protocol for kinetic resolution (KR) of racemic secondary alcohols with vinyl acetate as an acyl donor, using the biocatalyst Burkholderia cepacia lipase (BCL) immobilized on a biodegradable ternary blend support through polylactic acid (PLA)/polyvinyl alcohol (PVA)/chitosan (CHI); (PLA/PVA/CHI-BCL). The KR reaction with various substituted aromatic, heterocyclic racemic secondary alcohols gave enantiomerically pure alcohol and its enantioenriched acetate derivatives with high conversion (45-50%) and excellent enantiomeric excess (up to 99% ee) at optimized reaction conditions. The reaction works under mild conditions using simple and inexpensive starting materials such as racemic alcohols, vinyl acetate, and immobilized biocatalyst. The given protocol provides excellent recyclability with good yield and enantiomeric excess values up to the studied range of five cycles. The resultant products were characterized with the help of different analytical techniques such as 1H and 13C-NMR, chiral HPLC column, polarimeter, IR and GC-MS.
- More, Ganesh V.,Badgujar, Kirtikumar C.,Bhanage, Bhalchandra M.
-
p. 4592 - 4598
(2015/02/19)
-