- Platinum nanoparticles supported on polymeric ionic liquid functionalized magnetic silica: effective and reusable heterogeneous catalysts for the selective oxidation of alcohols in water
-
In this research, the syntheses of core-shell magnetic silica nanostructures, functionalized by a polymeric ionic liquid and immobilization of platinum nanoparticles, are described. Firstly, the magnetic silica nanoparticles were synthesized and modified using an amine-containing organosilane through a single-step process. The synthesized nanostructures were functionalized by the synthesis and polymerization of a pyridinium ionic liquid and a methyl methacrylate monomer, respectively, onto their surfaces. The platinum nanoparticles were immobilized on the functionalized nanoparticles. The obtained functionalized nanostructures have been used in the selective aerobic oxidation, in an aqueous medium, of primary and encumbered secondary aliphatic alcohols, and exhibit high activity at mild temperatures.
- Vessally, Esmail,Ghasemisarabbadeih, Mostafa,Ekhteyari, Zeynab,Hosseinzadeh-Khanmiri, Rahim,Ghorbani-Kalhor, Ebrahim,Ejlali, Ladan
-
p. 106769 - 106777
(2016)
-
Read Online
- Role of water and p-fluorobenzoic acid in mn(ii)t(p-cl)pp catalyzed aerobic oxidation of p-fluorotoluene
-
A solvent-free manganoporphyrin-catalyzed oxidiation of p-fluorotoluene was developed, using oxygen as a clean and cheap oxidant. The parameters that have relationship with conversion were investigated. The conversion of p-fluorotoluene was found to be depend on the stability of catalytic environment. Water and p-fluorobenzoic acid were the final oxidation products of p-fluorotoluene, would inhibit the activity of catalyst. The conversion would be increased from 7.0 to 16.5 %, by the dehydration of acetic anhydride.
- Fang, Yong-Qi,Lv, Chun-Xu,Lu, Ming
-
-
Read Online
- New benzothiazole based copper(II) hydrazone Schiff base complexes for selective and environmentally friendly oxidation of benzylic alcohols: The importance of the bimetallic species tuned by the choice of the counterion
-
Green and sustainable chemistry approaches necessitate an ongoing investigation towards new, environmentally benign and selective catalysts. We have thus prepared a new benzothiazole-scaffolded hydrazone Schiff base ligand L and coordinated it with copper(II) ions leading to five different complexes, the form of which in the solid state is counterion-dependent. Nitrate, chloride and triflate anions lead to monometallic species, whereas utilization of sulfates and tetrafluoroborates is responsible for the formation of bimetallic assemblies. The catalytic efficiency of synthesized compounds was shown in Cu-TEMPO (2,2,6,6-tetramethyl-l-piperidinoxyl) aerobic oxidation of activated alcohols resulting in good to excellent conversions and 100% selectivity to form the corresponding aldehydes. Considering the experimental results and Density Functional Theory calculations we propose two most plausible reaction mechanisms that further corroborate the enhanced activity of bimetallic species. It appears that the tridentate character of the ligand sacrifices some of the overall catalytic efficiency for the selectivity of the process. Aqueous reaction medium, low catalyst loading, air as oxidant and exclusive oxidative selectivity render these CuII complexes promising candidates for further improvement.
- Bocian, Aleksandra,Gorczyński, Adam,Marcinkowski, Damian,Witomska, Samanta,Kubicki, Maciej,Mech, Paulina,Bogunia, Ma?gorzata,Brzeski, Jakub,Makowski, Mariusz,Pawlu?, Piotr,Patroniak, Violetta
-
-
Read Online
- Polymerization-Enhanced Photosensitization
-
Effective photosensitizers are highly desirable in many applications, such as photodynamic therapy, photocatalytic organic waste decomposition, and synthetic chemistry. Herein, we demonstrate polymerization-enhanced photosensitization, in which conjugated-polymer-based photosensitizers show much higher efficiency in singlet oxygen (1O2) production than their small-molecule analogs. Based on small-molecule photosensitizers SM1–SM4 with long wavelength emission, four conjugated polymer photosensitizers, CP1–CP4, were prepared. Interestingly, the conjugated polymer photosensitizers CP1–CP4 showed 5.06-, 5.07-, 1.73-, and 3.42-fold higher 1O2 generation efficiency than SM1–SM4, respectively. The improved intersystem crossing process from the singlet excitation states to the triplet excitation states and improved light-harvesting ability are essential to the enhancement of 1O2 generation efficiency. To illustrate the advantages of conjugated polymer photosensitizers on various applications, we demonstrate the superior performance of CP1 by using photoinduced organic waste decomposition, photoinduced organic oxidation reaction, and photodynamic cancer therapy as examples. Organic photosensitizers (PSs) are unique compounds that can absorb light or electromagnetic waves and transform them into reactive molecules, such as singlet oxygen (1O2). Highly efficient PSs are in great demand for many applications, such as photodynamic therapy, photoinduced organic waste decomposition, and photocatalytic organic synthesis. In this work, we propose the concept of polymerization-enhanced photosensitization. We show that polymerization of small-molecule PSs into conjugated polymers could significantly enhance their efficiency in 1O2 production with superior performance to that of commercial PSs (e.g., Ce6) in various applications. This concept is anticipated to open up new opportunities for rational photosensitizer design and applications. Effective photosensitizers are highly desirable in many applications. Herein, Liu and co-workers demonstrate polymerization-enhanced photosensitization, in which conjugated-polymer-based photosensitizers show much higher efficiency in singlet oxygen (1O2) production than their small-molecule analogs. Based on this concept, conjugated polymer photosensitizer CP1 with an aggregation-induced emission feature is proposed to show highly efficient 1O2 generation ability superior to that of its small-molecule analog SM1 and commercial photosensitizer Ce6 in photodynamic therapy, organic waste decomposition, and photocatalytic reactions.
- Wu, Wenbo,Mao, Duo,Xu, Shidang,Kenry,Hu, Fang,Li, Xueqi,Kong, Deling,Liu, Bin
-
-
Read Online
- Efficient synthesis of aromatic carboxylic acids from aryl ketones in ionic liquid
-
Conversion of aryl ketones to the corresponding aromatic carboxylic acids has been achieved using sequential treatment of HDNIB and urea-hydrogen peroxide in [bmim]BF4 ionic liquid. Copyright Taylor & Francis Group, LLC.
- Jong, Chan Lee,Jang, Mi Lee
-
-
Read Online
- Synthesis and evaluation of indole-substituted N-heterocyclic carbene ligands
-
Indole-substituted N-heterocyclic carbene ligands were synthesized and evaluated through both computational and experimental methods. The performances of medium-sized imidazolylidenes IIn3 and IIn4 were comparable to IPr in the Cu(I)-catalyzed carboxylation of organoboronic esters.
- Yan, Huan,Liu, Zhongxian,Tan, Kai,Ji, Ruigeng,Ye, Yingxin,Yan, Tingbing,Shen, Yuehai
-
-
Read Online
- Active-sodium-promoted reductive cleavage of halogenated benzoic acids
-
The outcome of the reaction between 1,2-diaryl-1,2-disodioethanes and halogenated benzoic acids strongly depends on the nature of both reaction partners. Indeed, whilst chloro-, bromo- and iodobenzoic acids are easily dehalogenated, the reductive cleavage of fluorobenzoic acids proceeds to a high extent only in the presence of the dianions endowed with more powerful reducing properties. Moreover, it was observed that ortho-substituted benzoic acids are more easily dehalogenated than the corresponding para or meta isomers. These observations allowed the development of reaction conditions for the exhaustive or regioselective cleavage of selected polyhalogenated benzoic acids.
- Azzena, Ugo,Dettori, Giovanna,Mocci, Sarah,Pisano, Luisa,Cerioni, Giovanni,Mocci, Francesca
-
-
Read Online
- Transformation of Thioacids into Carboxylic Acids via a Visible-Light-Promoted Atomic Substitution Process
-
A visible-light-promoted atomic substitution reaction for transforming thiocacids into carboxylic acids with dimethyl sulfoxide (DMSO) as the oxygen source has been developed, affording various alkyl and aryl carboxylic acids in over 90% yields. The atomic substitution process proceeds smoothly through the photochemical reactivity of the formed hydrogen-bonding adduct between thioacids and DMSO. A DMSO-involved proton-coupled electron transfer (PCET) and the simultaneous generation of thiyl and hydroxyl radicals are proposed to be key steps for realizing the transformation.
- Fu, Qiang,Liang, Fu-Shun,Lou, Da-Wei,Pan, Gao-Feng,Wang, Rui,Wu, Min,Xie, Kai-Jun
-
supporting information
p. 2020 - 2024
(2022/03/31)
-
- Mechanochemical Grignard Reactions with Gaseous CO2 and Sodium Methyl Carbonate**
-
A one-pot, three-step protocol for the preparation of Grignard reagents from organobromides in a ball mill and their subsequent reactions with gaseous carbon dioxide (CO2) or sodium methyl carbonate providing aryl and alkyl carboxylic acids in up to 82 % yield is reported. Noteworthy are the short reaction times and the significantly reduced solvent amounts [2.0 equiv. for liquid assisted grinding (LAG) conditions]. Unexpectedly, aryl bromides with methoxy substituents lead to symmetric ketones as major products.
- Pfennig, Victoria S.,Villella, Romina C.,Nikodemus, Julia,Bolm, Carsten
-
supporting information
(2022/01/22)
-
- Scrutinizing ligand exchange reactions in the formation of the precious group metal-organic framework RuII,II-HKUST-1: The impact of diruthenium tetracarboxylate precursor and modulator choice
-
The precious group metal (PGM) analogues of the iconic metal-organic framework [Cu3(BTC)2] (HKUST-1; BTC = 1,3,5 benzenetricarboxylate) still represent a synthetic challenge, especially if targeting the univalent and ideally defect-free RuII,IIvariant. Herein we present a systematic study employing the controlled secondary building unit approach (CSA) by using a variety of diruthenium tetracarboxylate complexes [Ru2(RCO2)4] as precursors in the synthesis of univalent Ru-HKUST-1 samples. Carboxylate ligand exchange test reactions suggest the importance of a pKamatch between precursor ligand and BTC linker. For example,l-mandelate substituted precursors resulted in the most “perfect” samples of the investigated series with a fourfold increase in crystalline domain sizes compared to the established acetate route (according to PXRD and HR-TEM), high compositional purity (FT-IR, Raman, TGA and elemental analysis) and feature a so far unprecedentedly high BET surface area of 1789 m2g?1with the expected pore size distribution and total pore volume all similar to the ideal HKUST-1 parent structure.
- Heinz, Werner R.,Staude, Dominik,Mayer, David,Bunzen, Hana,Fischer, Roland A.
-
supporting information
p. 5226 - 5235
(2021/04/26)
-
- Aerobic oxidative C?C bond cleavage of aromatic alkenes by a high valency iron-containing perovskite catalyst
-
High valency iron-containing perovskite catalyst BaFeO3-dcould efficiently promote the additive-free oxidative C?C bond cleavage of various aromatic alkenes to the corresponding aldehydes or ketones using O2as the sole oxidant. This system was applicable to the gram-scale oxidation of 1,1-diphenylethylene, in which 2.71 g (75% yield) of the analytically pure ketone could be isolated.
- Shibata, Satomi,Kamata, Keigo,Hara, Michikazu
-
p. 2369 - 2373
(2021/04/22)
-
- Light-induced carboxylation of aryl derivatives with cooperative COF as an active photocatalyst and Ni(ii) co-catalyst
-
The photocatalytic carboxylation of aryl derivatives was demonstrated under CO2at atmospheric pressure using a mesoporous covalent organic framework (COF) as the active photocatalyst with triethylamine (TEA) as a sacrificial electron source under visible light. A yield of greater than 91% of the isolated product was achieved with 5 mg of catalyst. The reaction cycle is dependent on the use of the Ni(dmg)2co-catalyst and the sacrificial electron donor (TEA). The reaction does not occur in the absence of light (445 nm) even at elevated reaction temperature. We have also demonstrated that a yield of 32% of the isolated product could be obtained with the use of sunlight in the catalytic cycle. Additionally, this heterogeneous catalytic system was recyclable and reusable for several cycles.
- Chakrabortty, Pekham,Das, Anjan,Chowdhury, Arpita Hazra,Ghosh, Swarbhanu,Khan, Aslam,Islam, Sk. Manirul
-
p. 4738 - 4745
(2021/03/22)
-
- Merging N-Hydroxyphthalimide into Metal-Organic Frameworks for Highly Efficient and Environmentally Benign Aerobic Oxidation
-
Two highly efficient metal-organic framework catalysts TJU-68-NHPI and TJU-68-NDHPI have been successfully synthesized through solvothermal reactions of which the frameworks are merged with N-hydroxyphthalimide (NHPI) units, resulting in the decoration of pore surfaces with highly active nitroxyl catalytic sites. When t-butyl nitrite (TBN) is used as co-catalyst, the as-synthesized MOFs are demonstrated to be highly efficient and recyclable catalysts for a novel three-phase heterogeneous oxidation of activated C?H bond of primary and secondary alcohols, and benzyl compounds under mild conditions. Based on the high efficiency and selectivity, an environmentally benign system with good sustainability, mild conditions, simple work-up procedure has been established for practical oxidation of a wide range of substrates.
- Wang, Man,Liang, Gan,Wang, Yunhao,Fan, Tao,Yuan, Baoling,Liu, Mingxian,Yin, Ying,Li, Liangchun
-
supporting information
p. 9674 - 9685
(2021/06/09)
-
- A decatungstate-based ionic liquid exhibiting a very low dielectric constant suitable for acting as a solvent and a catalyst for the oxidation of organic substrates
-
In this contribution, a new POM-based ionic liquid, namely (P6,6,6,14)4[W10O32], was fully characterized. Its viscosity and its very low dielectric constant make this hybrid ionic liquid suitable to be used as a solvent for organic transformations. As a proof of concept, this unique ionic liquid having both solvent and catalyst properties was tested for the catalytic oxidation of various alcohols and alkenes in the presence of H2O2.
- Martinetto, Yohan,Pégot, Bruce,Roch-Marchal, Catherine,Haouas, Mohamed,Cottyn-Boitte, Betty,Camerel, Franck,Jeftic, Jelena,Morineau, Denis,Magnier, Emmanuel,Floquet, Sébastien
-
supporting information
p. 9751 - 9755
(2021/06/15)
-
- Combining photoredox catalysis and oxoammonium cations for the oxidation of aromatic alcohols to carboxylic acids
-
A methodology is reported for converting alcohols to the corresponding carboxylic acids. A dual catalytic system involving a merger of photoredox catalysis and 4-acetamido-TEMPO is employed to carry out this oxidation process.
- Nandi, Jyoti,Hutcheson, Ellen L.,Leadbeater, Nicholas E.
-
supporting information
(2020/12/25)
-
- Cu(II)-Based Ionic Liquid Supported on SBA-15 Nanoparticles Catalyst for the Oxidation of Various Alcohols into Carboxylic Acids in the Presence of CO2
-
In this paper, we have produced carboxylic acids by the oxidation of various alcohols in the presence of CO2 using SBA-15/IL supported Cu(II) (SBA-15/IL/Cu(II)) as nanocatalyst. The obtained products showed to have excellent yields by taking into account of SBA-15/IL/Cu(II) nanocatalyst. In addition, the analysis of EDX, SEM, TGA, TEM, XPS, and FT-IR showed the heterogeneous structure of SBA-15/IL/Cu (II) catalyst. It is determined that, after using SBA-15 excess, the catalytic stability of the system was enhanced. Moreover, hot filtration provided a full vision in the heterogeneous catalyst nature. The recycling as well as reuse of the catalyst were studied in cases of coupling reactions many times. Moreover, we have studied the mechanism of the coupling reactions. Graphic Abstract: [Figure not available: see fulltext.]
- Chen, Yanwu,Hou, Dejian,Lin, Litian,Peng, Qi,Sadeghzadeh, Seyed Mohsen
-
-
- Oxidative α-C-C Bond Cleavage of 2° and 3° Alcohols to Aromatic Acids with O2at Room Temperature via Iron Photocatalysis
-
The selective α-C-C bond cleavage of unfunctionalized secondary (2°) and tertiary alcohols (3°) is essential for valorization of macromolecules and biopolymers. We developed a blue-light-driven iron catalysis for aerobic oxidation of 2° and 3° alcohols to acids via α-C-C bond cleavages at room temperature. The first example of oxygenation of the simple tertiary alcohols was reported. The iron catalyst and blue light play critical roles to enable the formation of highly reactive O radicals from alcohols and the consequent two α-C-C bond cleavages.
- Zhang, Zongnan,Zhang, Guoxiang,Xiong, Ni,Xue, Ting,Zhang, Junjie,Bai, Lu,Guo, Qinyue,Zeng, Rong
-
supporting information
p. 2915 - 2920
(2021/05/05)
-
- Atomically Dispersed Co Clusters Anchored on N-doped Carbon Nanotubes for Efficient Dehydrogenation of Alcohols and Subsequent Conversion to Carboxylic Acids
-
The catalytic dehydrogenation of readily available alcohols to high value-added carbonyl compounds is a research hotspot with scientific significance. Most of the current research about this reaction is performed with noble metal-based homogeneous catalysts of high price and poor reusability. Herein, highly dispersed Co-cluster-decorated N-doped carbon nanotubes (Co/N-CNTs) were fabricated via a facile strategy and used for the dehydrogenation of alcohols with high efficiency. Various characterization techniques confirmed the presence of metallic Co clusters with almost atomic dispersion, and the N-doped carbon supports also enhanced the catalytic activity of Co clusters in the dehydrogenation reaction. Aldehydes as dehydrogenation products were further transformed in situ to carboxylic acids through a Cannizzaro-type pathway under alkaline conditions. The reaction pathway of the dehydrogenation of alcohols was clearly confirmed by theoretical calculations. This work should provide an effective and simple approach for the accurate design and synthesis of small Co-clusters catalysts for the efficient dehydrogenation-based transformation of alcohols to carboxylic acids under mild reaction conditions.
- Dong, Zhengping,Fang, Jian,Li, Boyang,Xu, Dan,Zhang, Fengwei,Zhao, Hong,Zhu, Hanghang
-
p. 4536 - 4545
(2021/09/22)
-
- Acetyl nitrate mediated conversion of methyl ketones to diverse carboxylic acid derivatives
-
The development of a novel acetyl nitrate mediated oxidative conversion of methyl ketones to carboxylic acid derivatives is described. By analogy to the haloform reaction and supported by experimental and computational investigation we propose a mechanism for this transformation.
- Bernard, Josephine,Capilato, Joseph N.,Hoy, Erik P.,Mattiucci, Joseph,Pellegrinelli, Peter J.,Perez, Lark J.,Philippi, Shane,Schnorbus, Logan
-
p. 5298 - 5302
(2021/06/30)
-
- Milled Dry Ice as a C1 Source for the Carboxylation of Aryl Halides
-
The use of carbon dioxide as a C1 chemical feedstock remains an active field of research. Here we showcase the use of milled dry ice as a method to promote the availability of CO 2in a reaction solution, permitting practical synthesis of arylcarboxylic acids. Notably, the use of milled dry ice produces marked increases in yields relative to those obtained with gaseous CO 2, as previously reported in the literature.
- O'Brien, Connor J.,Nicewicz, David A.
-
supporting information
p. 814 - 816
(2021/03/01)
-
- Isotruxene-based porous polymers as efficient and recyclable photocatalysts for visible-light induced metal-free oxidative organic transformations
-
Two new isotruxene-based porous polymers were prepared and demonstrated to be highly efficient, metal-free heterogeneous photocatalysts for oxidative transformations using air as the mild oxidant under visible-light irradiation. Both catalysts show excellent recyclability. In addition, the reactions can be performed in water, further indicating the greenness of this method. This journal is
- Zhang, Haowen,Zhang, Xiao,Zheng, Ying,Zhou, Cen
-
supporting information
p. 8878 - 8885
(2021/11/27)
-
- Ni-NiO heterojunctions: a versatile nanocatalyst for regioselective halogenation and oxidative esterification of aromatics
-
Herein, we report a facile method for the synthesis of Ni-NiO heterojunction nanoparticles, which we utilized for the nuclear halogenation reaction of phenol and substituted phenols usingN-bromosuccinimide (NBS). A remarkablepara-selectivity was achieved for the halogenated products under semi-aqueous conditions. Interestingly, blocking of thepara-position of phenol offeredortho-selective halogenation. In addition, the Ni-NiO nanoparticles catalyzed the oxidative esterification of carbonyl compounds with alcohol, diol or dithiol in the presence of a catalytic amount of NBS. It was observed that the aromatic carbonyls substituted with an electron-donating group favoured nuclear halogenation, whereas an electron-withdrawing group substitution in carbonyl compounds facilitated the oxidation reaction. In addition, the catalyst was magnetically separated and recycled 10 times. The tuned electronic structure at the Ni-NiO heterojunction controlled selectivity and activity as no suchpara-selectivity was observed with commercially available NiO or Ni nanoparticles.
- Bhardwaj, Nivedita,Goel, Bharat,Indra, Arindam,Jain, Shreyans K.,Singh, Ajit Kumar,Tripathi, Nancy
-
p. 14177 - 14183
(2021/08/16)
-
- Aerobic oxidation of aldehydes to carboxylic acids catalyzed by recyclable ag/c3 n4 catalyst
-
The oxidation of aldehydes is an efficient methodology for the synthesis of carboxylic acids. Herein we hope to report a simple, efficient and recyclable protocol for aerobic oxidation of aldehydes to carboxylic acid by using C3N4 supported silver nanoparticles (Ag/C3N4) as a catalyst in aqueous solution under mild conditions. Under standard conditions, the corresponding carboxylic acids can be obtained in good to excellent yields. In addition, Ag/C3N4 is convenient for recovery and could be reused three times with satisfactory yields.
- Wu, Chaolong,Yao, Xiaoquan,Yu, Min,Zhou, Li,Zhu, Li
-
p. 167 - 175
(2021/03/19)
-
- MOF-Zn-NHC as an efficient N-heterocyclic carbene catalyst for aerobic oxidation of aldehydes to their corresponding carboxylic acids: Via a cooperative geminal anomeric based oxidation
-
As an efficient heterogenous N-heterocyclic carbene (NHC) catalyst, MOF-Zn-NHC was used in the aerobic oxidation of aryl aldehydes to their corresponding carbocyclic acids via an anomeric based oxidation. Features such as mild reaction conditions and no need for a co-catalyst or oxidative reagent can be considered as the major advantages of the presented method in this study. This journal is
- Babaee, Saeed,Zarei, Mahmoud,Zolfigol, Mohammad Ali
-
p. 36230 - 36236
(2021/12/02)
-
- CO2-Enabled Cyanohydrin Synthesis and Facile Iterative Homologation Reactions**
-
Thermodynamic and kinetic control of a chemical process is the key to access desired products and states. Changes are made when a desired product is not accessible; one may manipulate the reaction with additional reagents, catalysts and/or protecting groups. Here we report the use of carbon dioxide to accelerate cyanohydrin synthesis under neutral conditions with an insoluble cyanide source (KCN) without generating toxic HCN. Under inert atmosphere, the reaction is essentially not operative due to the unfavored equilibrium. The utility of CO2-mediated selective cyanohydrin synthesis was further showcased by broadening Kiliani–Fischer synthesis under neutral conditions. This protocol offers an easy access to a variety of polyols, cyanohydrins, linear alkylnitriles, by simply starting from alkyl- and arylaldehydes, KCN and an atmospheric pressure of CO2.
- Juhl, Martin,Petersen, Allan R.,Lee, Ji-Woong
-
supporting information
p. 228 - 232
(2020/11/30)
-
- Meso-Carbazole substituted palladium porphyrins: Efficient catalysts for visible light induced oxidation of aldehydes
-
The A3B and A2B2 type porphyrins having N-butylcarbazole and p-cyanophenyl groups are synthesized and characterized. Their palladium complexes have also been prepared and utilized as catalysts for the photo-oxidation reactions of aromatic aldehydes in good yields. Pd(II)porphyrins displayed decent phosphorescence at a670 nm and were able to generate singlet oxygen upon light irradiation. The calculated singlet oxygen quantum yields for Pd(II)porphyrins were between 57% and 73%. The photo-catalytic application of Pd(II)porphyrins for aerobic oxidation of aromatic aldehydes is demonstrated.
- Janaagal, Anu,Pandey, Vijayalakshmi,Sabharwal, Sudhir,Gupta, Iti
-
p. 571 - 581
(2021/05/05)
-
- 4,4 ’ - Difluorobenzophenone and preparation method and application thereof
-
The 4, 4 ’ difluorobenzophenone and the preparation method thereof comprise: mixing a molecular sieve and hydrogen peroxide and with fluorobenzaldehyde to form a mixed solution, oxidizing fluorobenzaldehyde into p-fluorobenzoic acid, wherein the molecular sieve is a catalyst. Hydrochloric acid and zinc chloride are added to the mixed solution to generate p-fluorobenzoyl chloride under the condition that the molecular sieve is used as a catalyst. Fluorobenzene was added to the mixed solution containing the p-fluorobenzoyl chloride to obtain the 4, 4 ’ - difluorobenzophenone. Thus, the synthetic method has the following advantages: 4, the yield of 4 ’ - difluorobenzophenone is not lower 98%, the purity is not lower than 99.999%, and the purity makes it available for preparation of medical grade polyether ether ketone. Reaction conditions are easy to control, and the risk of explosion is reduced to a certain extent.
- -
-
Paragraph 0057-0099
(2021/11/21)
-
- One-Pot Direct Oxidation of Primary Amines to Carboxylic Acids through Tandem ortho-Naphthoquinone-Catalyzed and TBHP-Promoted Oxidation Sequence
-
Biomimetic oxidation of primary amines to carboxylic acids has been developed where the copper-containing amine oxidase (CuAO)-like o-NQ-catalyzed aerobic oxidation was combined with the aldehyde dehydrogenase (ALDH)-like TBHP-mediated imine oxidation protocol. Notably, the current tandem oxidation strategy provides a new mechanistic insight into the imine intermediate and the seemingly simple TBHP-mediated oxidation pathways of imines. The developed metal-free amine oxidation protocol allows the use of molecular oxygen and TBHP, safe forms of oxidant that may appeal to the industrial application.
- Kim, Hun Young,Oh, Kyungsoo,Si, Tengda
-
supporting information
p. 18150 - 18155
(2021/12/09)
-
- An efficient chromium(iii)-catalyzed aerobic oxidation of methylarenes in water for the green preparation of corresponding acids
-
A highly efficient method to oxidize methylarenes to their corresponding acids with a reusable Cr catalyst was developed. The reaction can be carried out in water with 1 atm oxygen and K2S2O8as cooxidants, proceeds under green and mild conditions, and is suitable for the oxidation of both electron-deficient and electron-rich methylarenes, including heteroaryl methylarenes, even at the gram level. The excellent result, together with its simplicity of operation and the ability to continuously reuse the catalyst, makes this new methodology environmentally benign and cost-effective. The generality of this methodology gives it the potential for use on an industrial scale. Differing from the accepted oxidation mechanism of toluene, GC-MS studies and DFT calculations have revealed that the key benzyl alcohol intermediate is formed under the synergetic effect of the chromium and molybdenum in the Cr catalyst, which can be further oxidized to afford benzaldehyde and finally benzoic acid.
- Jiang, Feng,Liu, Shanshan,Wei, Yongge,Yan, Likai,Yu, Han,Zhao, Wenshu
-
supporting information
p. 12413 - 12418
(2021/09/28)
-
- Ferric ion concentration-controlled aerobic photo-oxidation of benzylic C–H bond with high selectivity and conversion
-
A Fe(III)-promoted highly selective photo-oxidation of benzylic C–H bond delivering relative carbonyl products is reported. By altering the concentration of ferric salt, methylarenes can be selectively oxidized under UV irradiation to furnish aromatic aldehydes or acids, respectively. By this protocol, the oxidation of ethylarenes provides the corresponding acetophenones. The reaction is inferred to involve divergent pathways in different concentrations of catalyst for the alternative selectivity between aldehydes and aicds. The reusable catalyst, high conversion and selectivity make this oxidation a green and economic protocol for the synthesis of aromatic carbonyl compounds.
- Bu, Hongzhong,Gu, Jiefan,Li, Yufeng,Ma, Hongfei,Wan, Yuting,Wu, Zheng-Guang,Zhang, Weijian,Zhou, Ying'ao,Zhu, Hongjun
-
-
- Photo-induced deep aerobic oxidation of alkyl aromatics
-
Oxidation is a major chemical process to produce oxygenated chemicals in both nature and the chemical industry. Presently, the industrial manufacture of benzoic acids and benzene polycarboxylic acids (BPCAs) is mainly based on the deep oxidation of polyalkyl benzene, which is somewhat suffering from environmental and economical disadvantage due to the formation of ozone-depleting MeBr and corrosion hazards of production equipment. In this report, photo-induced deep aerobic oxidation of (poly)alkyl benzene to benzene (poly)carboxylic acids was developed. CeCl3 was proved to be an efficient HAT (hydrogen atom transfer) catalyst in the presence of alcohol as both hydrogen and electron shuttle. Dioxygen (O2) was found as a sole terminal oxidant. In most cases, pure products were easily isolated by simple filtration, implying large-scale implementation advantages. The reaction provides an ideal protocol to produce valuable fine chemicals from naturally abundant petroleum feedstocks. [Figure not available: see fulltext.].
- Wang, Chang-Cheng,Zhang, Guo-Xiang,Zuo, Zhi-Wei,Zeng, Rong,Zhai, Dan-Dan,Liu, Feng,Shi, Zhang-Jie
-
p. 1487 - 1492
(2021/07/10)
-
- Photoinduced FeCl3-Catalyzed Alkyl Aromatics Oxidation toward Degradation of Polystyrene at Room Temperature?
-
While polystyrene is widely used in daily life as a synthetic plastic, the subsequently selective degradation is still very challenging and highly required. Herein, we disclose a highly practical and selective reaction for the catalytically efficient oxidation of alkyl aromatics (including 1°, 2°, and 3° alkyl aromatics) to carboxylic acids. While dioxygen was used as the sole terminal oxidant, this protocol was catalyzed by the inexpensive and readily available ferric compound (FeCl3) with irradiation of visible light (blue LEDs) under only 1 atmosphere of O2 at room temperature. This system could further facilitate the selective degradation of polystyrene to benzoic acid, providing an important and practical tool to generate high-value chemical from abundant polystyrene wastes.
- Zhang, Guoxiang,Zhang, Zongnan,Zeng, Rong
-
supporting information
p. 3225 - 3230
(2021/09/28)
-
- 1,2-Dibutoxyethane-Promoted Oxidative Cleavage of Olefins into Carboxylic Acids Using O2 under Clean Conditions
-
Herein, we report the first example of an effective and green approach for the oxidative cleavage of olefins to carboxylic acids using a 1,2-dibutoxyethane/O2 system under clean conditions. This novel oxidation system also has excellent functional-group tolerance and is applicable for large-scale synthesis. The target products were prepared in good to excellent yields by a one-pot sequential transformation without an external initiator, catalyst, and additive.
- Ou, Jinhua,Tan, Hong,He, Saiyu,Wang, Wei,Hu, Bonian,Yu, Gang,Liu, Kaijian
-
p. 14974 - 14982
(2021/10/25)
-
- Mechanistic studies into visible light-driven carboxylation of aryl halides/triflates by the combined use of palladium and photoredox catalysts
-
The reaction mechanism of palladium-catalyzed visible light-driven carboxylation of aryl halides and triflates with a photoredox catalyst was examined in detail. Experimental and theoretical studies indicated that the active species for photoredox- catalyzed reduction was cationic ArPd(II)+ species to generate nucleophilic ArPd(I) or its further reduced ArPd(0)- species, which reacted with CO2 to give carboxylic acids. Hydrodehalogenated compounds, main byproducts in this carboxylation, were thought to be generated by protonation of these reduced species.
- Caner, Joaquim,Iwasawa, Nobuharu,Martin, Ruben,Murata, Kei,Shimomaki, Katsuya,Toriumi, Naoyuki
-
supporting information
p. 1846 - 1853
(2021/08/13)
-
- Cleavage of Carboxylic Esters by Aluminum and Iodine
-
A one-pot procedure for deprotecting carboxylic esters under nonhydrolytic conditions is described. Typical alkyl carboxylates are readily deblocked to the carboxylic acids by the action of aluminum powder and iodine in anhydrous acetonitrile. Cleavage of lactones affords the corresponding ω-iodoalkylcarboxylic acids. Aryl acetylates undergo deacetylation with the participation of the neighboring group. This method enables the selective cleavage of alkyl carboxylic esters in the presence of aryl esters.
- Sang, Dayong,Yue, Huaxin,Fu, Yang,Tian, Juan
-
p. 4254 - 4261
(2021/03/09)
-
- Oxidative carbon-carbon bond cleavage of 1,2-diols to carboxylic acids/ketones by an inorganic-ligand supported iron catalyst
-
The carbon-carbon bond cleavage of 1,2-diols is an important chemical transformation. Although traditional stoichiometric and catalytic oxidation methods have been widely used for this transformation, an efficient and valuable method should be further explored from the views of reusable catalysts, less waste, and convenient procedures. Herein an inorganic-ligand supported iron catalyst (NH4)3[FeMo6O18(OH)6]·7H2O was described as a heterogeneous molecular catalyst in acetic acid for this transformation in which hydrogen peroxide was used as the terminal oxidant. Under the optimized reaction conditions, carbon-carbon bond cleavage of 1,2-diols could be achieved in almost all cases and carboxylic acids or ketones could be afforded with a high conversion rate and high selectivity. Furthermore, the catalytic system was used efficiently to degrade renewable biomass oleic acid. Mechanistic insights based on the observation of the possible intermediates and control experiments are presented.
- Chen, Weiming,Xie, Xin,Zhang, Jian,Qu, Jian,Luo, Can,Lai, Yaozhu,Jiang, Feng,Yu, Han,Wei, Yongge
-
supporting information
p. 9140 - 9146
(2021/11/23)
-
- Green synthesis method of aromatic acid
-
The invention discloses a green synthesis method of aromatic acid. Nickel-catalyzed carbonyl insertion is carried out on aryl iodine in the presence of formate, acid anhydride, a phosphine ligand andan organic solvent by using a nickel catalyst to obtain the aromatic acid. Efficient catalytic conversion is realized by utilizing the cheap nickel catalyst, the reaction conditions are mild, and theoperation is simple.
- -
-
Paragraph 0048-0122; 0171-0177; 0271-0272
(2020/05/01)
-
- Method for preparing organic acid by oxidative cleavage of aromatic secondary alcohol
-
The invention relates to a method for preparing organic acids by oxidation of aromatic secondary alcohols. With air or oxygen as an oxygen source, a copper salt and an organic ligand as catalysts, aninorganic alkali is added, and aromatic secondary alcohols are subjected to carbon-carbon bond oxidative cracking to obtain the organic acids. The method has the advantages of high oxidation efficiency and high product yield; with the use of air or oxygen as the oxygen source, the method is economical and environmentally friendly and has good application prospects.
- -
-
Paragraph 0043-0046; 0051
(2020/09/16)
-
- Nickel-catalyzed carboxylation of aryl iodides with lithium formate through catalytic CO recycling
-
A protocol for the Ni-catalyzed carboxylation of aryl iodides with formate has been developed with good functional group compatibility for the synthesis of a variety of aromatic carboxylic acids under mild conditions. The reaction tolerates other functionalities for cross-coupling, such as aryl bromide, aryl chloride, aryl tosylate, and aryl pinacol boronate. The reaction proceeds through a carbonylation process with in situ generated carbon monoxide in the presence of a catalytic amount of acetic anhydride and lithium formate, avoiding the use of gaseous CO. The strategy of CO recycling in catalytic amounts is critical for the success of the reaction.
- Fu, Ming-Chen,Fu, Yao,Shang, Rui,Wu, Ya-Nan
-
supporting information
p. 4067 - 4069
(2020/04/20)
-
- Oxidatively Induced Aryl-CF3 Coupling at Diphosphine Nickel Complexes
-
This communication describes the synthesis of a series of diphosphine NiII(Ph)(CF3) complexes and studies of their reactivity toward oxidatively induced Ph-CF3 bond-forming reductive elimination. Treatment of these complexes with the one-electron outer-sphere oxidant ferrocenium hexafluorophosphate (FcPF6) affords benzotrifluoride, but the yield varies dramatically as a function of diphosphine ligand. Diphosphines with bite angles of less than 92° afforded 3. In contrast, those with bite angles between 95 and 102° formed PhCF3 in yields ranging from 62 to 77%.
- Bour, James R.,Roy, Pronay,Canty, Allan J.,Kampf, Jeff W.,Sanford, Melanie S.
-
supporting information
p. 3 - 7
(2020/01/03)
-
- A sodium trifluoromethanesulfinate-mediated photocatalytic strategy for aerobic oxidation of alcohols
-
A sodium trifluoromethanesulfinate-mediated photocatalytic strategy for the aerobic oxidation of alcohols has been developed for the first time, and the photoredox aerobic oxidation of secondary and primary alcohols provided the corresponding ketones and carboxylic acids, respectively, in high to excellent yields.
- Zhu, Xianjin,Liu, Can,Liu, Yong,Yang, Haijun,Fu, Hua
-
p. 12443 - 12446
(2020/10/30)
-
- Acceptorless dehydrogenative oxidation of primary alcohols to carboxylic acids and reduction of nitroarenes via hydrogen borrowing catalyzed by a novel nanomagnetic silver catalyst
-
A novel silver nano magnetic catalyst was devised for dehydrogenative oxidation of aromatic and aliphatic alcohols to the corresponding acid with water as the sole oxygen source and hydrogen gas as the only by-product. The designed catalytic system advantages from easy recovery of magnetic materials i.e. magnetic decantation, being economically viable and environmentally friendly. Furthermore, the catalytic reaction is able to reduce aryl nitro compounds in the absence of any reducing agent.
- Yazdani, Elahe,Heydari, Akbar
-
supporting information
(2020/08/14)
-
- Highly efficient oxidation of alcohols to carboxylic acids using a polyoxometalate-supported chromium(iii) catalyst and CO2
-
Direct catalytic oxidation of alcohols to carboxylic acids is very attractive, but economical catalysis systems have not yet been well established. Here, we show that a pure inorganic ligand-supported chromium compound, (NH4)3[CrMo6O18(OH)6] (simplified as CrMo6), could be used to effectively promote this type of reaction in the presence of CO2. In almost all cases, oxidation of various alcohols (aromatic and aliphatic) could be achieved under mild conditions, and the corresponding carboxylic acids can be achieved in high yield. The chromium catalyst 1 can be reused several times with little loss of activity. Mechanism study and control reactions demonstrate that the acidification proceeds via the key oxidative immediate of aldehydes.
- Han, Sheng,Wang, Ying,Wei, Yongge,Wu, Zhikang,Yu, Han
-
p. 3150 - 3154
(2020/06/19)
-
- Cobalt-Catalyzed Acceptorless Dehydrogenation of Alcohols to Carboxylate Salts and Hydrogen
-
The facile oxidation of alcohols to carboxylate salts and H2 is achieved using a simple and readily accessible cobalt pincer catalyst (NNNHtBuCoBr2). The reaction follows an acceptorless dehydrogenation pathway and displays good functional group tolerance. The amine-amide metal-ligand cooperation in cobalt catalyst is suggested to facilitate this transformation. The mechanistic studies indicate that in-situ-formed aldehydes react with a base through a Cannizzaro-type pathway, resulting in potassium hemiacetolate, which further undergoes catalytic dehydrogenation to provide the carboxylate salts and H2
- Gunanathan, Chidambaram,Kishore, Jugal,Pattanaik, Sandip,Pradhan, Deepak Ranjan
-
supporting information
(2020/03/03)
-
- Sequential Connection of Mutually Exclusive Catalytic Reactions by a Method Controlling the Presence of an MOF Catalyst: One-Pot Oxidation of Alcohols to Carboxylic Acids
-
A functionalized metal-organic framework (MOF) catalyst applied to the sequential one-pot oxidation of alcohols to carboxylic acids controls the presence of a heterogeneous catalyst. The conversion of alcohols to aldehydes was acquired through aerobic oxidation using a well-known amino-oxy radical-functionalized MOF. In the same flask, a simple filtration of the radical MOF with mild heating of the solution completely altered the reaction media, providing radical scavenger-free conditions suitable for the autoxidation of the aldehydes formed in the first step to carboxylic acids. The mutually exclusive radical-catalyzed aerobic oxidation (the first step with MOF) and radical-inhibited autoxidation (the second step without MOF) are sequentially achieved in a one-pot manner. Overall, we demonstrate a powerful and efficient method for the sequential oxidation of alcohols to carboxylic acids by employing a readily functionalizable heterogeneous MOF. In addition, our MOF in-and-out method can be utilized in an environmentally friendly way for the oxidation of alcohols to carboxylic acids of industrial and economic value with broad functional group tolerance, including 2,5-furandicarboxylic acid and 1,4-benzenedicarboxylic acid, with good yield and reusability. Furthermore, MOF-TEMPO, as an antioxidative stabilizer, prevents the undesired oxidation of aldehydes, and the perfect "recoverability"of such a reactive MOF requires a re-evaluation of the advantages of MOFs from heterogeneity in catalytic and related applications.
- Kim, Seongwoo,Lee, Ha-Eun,Suh, Jong-Min,Lim, Mi Hee,Kim, Min
-
p. 17573 - 17582
(2020/12/22)
-
- Cobalt-Catalyzed Reductive Carboxylation of Aryl Bromides with Carbon Dioxide
-
Cobalt-catalyzed reductive carboxylation of aryl bromides with carbon dioxide has been developed. The reaction proceeded under one atm pressure of CO2 at 40 °C in the presence of cobalt iodide/2,2′-bipyridine catalysts and zinc dust as a reducing reagent. Various aryl bromides could be converted to the corresponding carboxylic acids in good to high yields. Preliminary mechanistic experiments ruled out intervention of intermediate organozinc species for carboxylation with CO2, thus suggesting a direct CO2 insertion into the corresponding ArCoBr species. (Figure presented.).
- Hang, Wei,Yi, Yaping,Xi, Chanjuan
-
supporting information
p. 2337 - 2341
(2020/04/30)
-
- Cobalt-catalyzed carboxylation of aryl and vinyl chlorides with CO2
-
The transition-metal-catalyzed carboxylation of aryl and vinyl chlorides with CO2 is rarely studied, and has been achieved only with a Ni catalyst or combination of palladium and photoredox. In this work, the cobalt-catalyzed carboxylation of aryl and vinyl chlorides and bromides with CO2 has been developed. These transformations proceed under mild conditions and exhibit a broad substrate scope, affording the corresponding carboxylic acids in good to high yields.
- Wang, Yanwei,Jiang, Xiaomei,Wang, Baiquan
-
supporting information
p. 14416 - 14419
(2020/12/01)
-
- Furan Carboxylic Acids Production with High Productivity by Cofactor-engineered Whole-cell Biocatalysts
-
Furan carboxylic acids are useful chemicals in various industries. In this work, biocatalytic production of furan carboxylic acids was reported with high productivities by cofactor-engineered Escherichia coli cells. NADH oxidase (NOX) was introduced into E. coli harboring aldehyde dehydrogenases (ALDHs) to promote intracellular NAD+ regeneration, thus significantly enhancing ALDH-catalyzed oxidation. These engineered biocatalysts were capable of efficient aerobic oxidation of a variety of aromatic aldehydes. More importantly, they exhibited high substrate tolerance toward toxic furans. E. coli co-expressing vanillin dehydrogenase and NOX (E. coli_CtVDH1_NOX) enabled efficient oxidation of 250 mM of 5-hydroxymethylfurfural (HMF) to 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), providing a productivity of 3.7 g/L h. With E. coli_CtVDH2_NOX as catalyst, up to 240 mM of furfural and 5-methoxymethylfurfural (MMF) could be smoothly oxidized. 2-Furoic acid (FCA, 227 mM) and 5-methoxymethyl-2-furancarboxylic acid (MMFCA, 287 mM) were produced in fed-batch synthesis, providing the productivities of 2.0 and 5.6 g/L h, respectively.
- Zhang, Xue-Ying,Wang, Xin,Li, Nan-Wei,Guo, Ze-Wang,Zong, Min-Hua,Li, Ning
-
p. 3257 - 3264
(2020/05/25)
-
- Light and oxygen-enabled sodium trifluoromethanesulfinate-mediated selective oxidation of C-H bonds
-
Visible light-induced organic reactions are important chemical transformations in organic chemistry, and their efficiency highly depends on suitable photocatalysts. However, the commonly used photocatalysts are precious transition-metal complexes and elaborate organic dyes, which hamper large-scale production due to high cost. Here, for the first time, we report a novel strategy: light and oxygen-enabled sodium trifluoromethanesulfinate-mediated selective oxidation of C-H bonds, allowing high-value-added aromatic ketones and carboxylic acids to be easily prepared in high-to-excellent yields using readily available alkyl arenes, methyl arenes and aldehydes as materials. The mechanistic investigations showed that the treatment of inexpensive and readily available sodium trifluoromethanesulfinate with oxygen under irradiation of light could in situ form a pentacoordinate sulfide intermediate as an efficient photosensitizer. The method represents a highly efficient, economical and environmentally friendly strategy, and the light and oxygen-enabled sodium trifluoromethanesulfinate photocatalytic system represents a breakthrough in photochemistry. This journal is
- Fu, Hua,Liu, Can,Liu, Yong,Yang, Haijun,Zhu, Xianjin
-
supporting information
p. 4357 - 4363
(2020/07/14)
-
- Pd(OAc)2 promoted bis-N-heterocyclic carbene-catalyzed oxidative transformation of aldehydes
-
The bis-N-heterocyclic carbene-catalyzed (bis-NHC-catalyzed) oxidative transformation of aldehydes was successfully studied in water under air. The reaction rate increased through the use of Pd(OAc)2 as an additive. Notably, the catalytic system exhibited good tolerance toward aliphatic and aromatic aldehydes bearing halide and alkyl functional groups. In addition, gram-scale reaction was also tested in this study. The use of water and operational simplicity make this methodology environmentally benign and cost-effective.
- Yu, Ya-Han,Wang, Tsui,Chiu, Chien-Cheng,Lu, Ta-Jung,Lee, Dong-Sheng
-
p. 202 - 205
(2019/11/28)
-
- Preparation method of bimetallic catalyst oxidation aldehyde synthetic carboxylic acid (by machine translation)
-
The method is, in a reaction solvent: under normal pressure oxygen condition, under the action of a bimetallic catalyst under the action of a bimetallic catalyst under the action of a bimetallic catalyst under the action of a bimetallic catalyst, at, DEG, under stirring . under a stirring condition with an aldehyde compound as a substrate 10-90 °C in a reaction solvent under, a stirring condition under the action of a bimetallic catalyst . The reaction solution is stirred, for. 1-12h, hours at; room temperature, under, the action, of a bimetallic 1:1 catalyst Cu(OAc) under the action of a bimetallic catalyst under the action of a bimetallic catalyst under the action of a double-metal catalyst. 2 · H2 O And Co(OAc)2 · 44H2 O As the bimetallic catalyst, can achieve the highest yield of the carboxylic acid product, in high yield, by adjusting the reaction temperature, solvent, catalyst amount, for different types of the raw material aldehyde 98%. (by machine translation)
- -
-
Paragraph 0026-0027
(2020/05/30)
-
- Oxidation of aromatic and aliphatic aldehydes to carboxylic acids by Geotrichum candidum aldehyde dehydrogenase
-
Oxidation reaction is one of the most important and indispensable organic reactions, so that green and sustainable catalysts for oxidation are necessary to be developed. Herein, biocatalytic oxidation of aldehydes was investigated, resulted in the synthesis of both aromatic and aliphatic carboxylic acids using a Geotrichum candidum aldehyde dehydrogenase (GcALDH). Moreover, selective oxidation of dialdehydes to aldehydic acids by GcALDH was also successful.
- Hoshino, Tomoyasu,Yamabe, Emi,Hawari, Muhammad Arisyi,Tamura, Mayumi,Kanamaru, Shuji,Yoshida, Keisuke,Koesoema, Afifa Ayu,Matsuda, Tomoko
-
-
- Redox-Inactive Metal Ions That Enhance the Nucleophilic Reactivity of an Alkylperoxocopper(II) Complex
-
The importance of redox-inactive metal ions in modulating the reactivity of redox-active biological systems is a subject of great current interest. In this work, the effect of redox-inactive metal ions (M3+ = Sc3+, Y3+, Yb3+, La3+) on the nucleophilic reactivity of a mononuclear ligand-based alkylperoxocopper(II) complex, [Cu(iPr2-tren-C(CH3)2O2)]+ (1), was examined. 1 was prepared by the addition of hydrogen peroxide and triethylamine to the solution of [Cu(iPr3-tren)(CH3CN)]+ (iPr3-tren = tris[2-(isopropylamino)ethyl]amine) via the formation of [Cu(iPr3-tren)(O2H)]+ (2) in methanol (CH3OH) at 30 °C. 1 was characterized using density functional theory (DFT) calculations and spectroscopic methods such as UV-vis, resonance Raman (rR), and electron paramagnetic resonance (EPR). DFT calculations support the electronic structure of 1 with an intermediate geometry between the trigonal-bipyramidal and square-pyramidal geometries, which is consistent with the observed EPR signal exhibiting a signal with g⊥ = 2.03 (A⊥ = 16 G) and g|| = 2.19 (A|| = 158 G). The Cu-O bond stretching frequency of 1 was observed at 507 cm-1 for 16O2 species (486 cm-1 for 18O2 species), and its O-O vibrational energy was determined to be 799 cm-1 for 16O2 species (759 cm-1 for 18O2 species) by rR spectroscopy. The reactivity of 1 was investigated in oxidative nucleophilic reactions. The positive slope of the Hammett plot (ρ = 2.3(1)) with para-substituted benzaldehydes and the reactivity order with 1°-, 2°-, and 3°-CHO demonstrate well the nucleophilic character of this copper(II) ligand-based alkylperoxo complex. The Lewis acidity of M3+ improves the oxidizing ability of 1. The modulated reactivity of 1 with M3+ was revealed to be an opposite trend of the Lewis acidity of M3+ in aldehyde deformylation.
- Cho, Jaeheung,Kim, Bohee,Kim, Seonghan,Ohta, Takehiro
-
supporting information
(2020/07/24)
-
- Nucleophilic reactivity of a mononuclear cobalt(iii)-bis(: Tert -butylperoxo) complex
-
A mononuclear cobalt(III)-bis(tert-butylperoxo) adduct (CoIII-(OOtBu)2) bearing a tetraazamacrocyclic ligand was synthesized and characterized using various physicochemical methods, such as X-ray, UV-vis, ESI-MS, EPR, and NMR analyses. The crystal structure of the CoIII-(OOtBu)2 complex clearly showed that two OOtBu ligands bound to the equatorial position of the cobalt(iii) center. Kinetic studies and product analyses indicate that the CoIII-(OOtBu)2 intermediate exhibits nucleophilic oxidative reactivity toward external organic substrates.
- Cho, Jaeheung,Jeong, Donghyun,Park, Younwoo,Shin, Bongki
-
supporting information
p. 9449 - 9452
(2020/09/07)
-
- Photoinduced Carbon Tetrabromide Initiated Aerobic Oxidation of Substituted Toluenes to Carboxylic Acids
-
A mild and metal-free procedure is reported for the aerobic oxidation of substituted toluenes to carboxylic acids by using CBr 4 as initiator under irradiation from a 400 nm blue light-emitting diode.
- Li, Xiaoqing,Xu, Xiangsheng,Yan, Xiaoyu,Yan, Xinhuan,Zhang, Guofu,Zheng, Kun
-
p. 272 - 274
(2020/02/18)
-