- Nickel-catalyzed and Li-mediated regiospecific C-H arylation of benzothiophenes
-
A nickel-based catalytic system for the regiospecific C2-H arylation of benzothiophene has been established. NiCl2(bpy) is used as a catalyst in combination with LiHMDS as a base in dioxane. The catalytic system is applicable to a variety of functionalized benzothiophenes, as well as other heteroarenes including thiophene, benzodithiophene, benzofuran and selenophene in combination with iodo aryl electrophiles. The role of LiHMDS as a uniquely potent base and a postulated mechanism are discussed. The applicability of this system is finally demonstrated for the synthesis of an intermediate of an active pharmaceutical ingredient.
- Canivet, Jér?me,Grousset, Léonie,Hisler, Ga?lle,Mohr, Yorck,Quadrelli, Elsje Alessandra,Roux, Yoann,Wisser, Florian M.
-
p. 3155 - 3161
(2020/06/19)
-
- C-H Arylation of Thiophenes with Aryl Bromides by a Parts-per-Million Loading of a Palladium NNC-Pincer Complex
-
A palladium NNC-pincer complex efficiently catalyzed the direct arylation of thiophene derivatives with extremely low palladium loadings of the order of parts per million. Thus, the reaction of various thiophenes with aryl bromides in the presence of 25-100 mol ppm of chlorido[(2-phenyl-κ- C 2)-9-phenyl-1,10-phenanthroline-κ 2- N, N ′]palladium(II) NNC-pincer complex, K 2CO 3, and pivalic acid in N, N -dimethyl acetamide afforded the corresponding 2- or 5-arylated thiophenes in good to excellent yields. A combination of the present C-H arylation and Hiyama coupling with the same NNC-pincer complex provides an efficient synthesis of unsymmetrical 2,5-thiophenes with catalyst loadings at mol ppm levels.
- Purta, Anggi Eka,Ichii, Shun,Tazawa, Aya,Uozumi, Yasuhiro
-
supporting information
p. 1634 - 1638
(2020/08/28)
-
- Ag(I)-C-H Activation Enables Near-Room-Temperature Direct α-Arylation of Benzo[ b]thiophenes
-
The first example of near-room-temperature α-arylation of benzo[b]thiophenes is reported. The discovery rests on the observation of a switch in α-/β-regioselectivity at different loadings of Pd2(dba)3·CHCl3 in the coupling between benzo[b]thiophene and 4-iodotoluene. We show that this unprecedented regioselectivity switch is driven by a Ag(I)-mediated C-H activation at the α-C-H position, which becomes the dominant mode of reactivity at low concentrations of Pd. Competition experiments, kinetic studies, KIE, and D/H scrambling experiments have been carried out supporting this mechanism.
- Colletto, Chiara,Panigrahi, Adyasha,Fernández-Casado, Jaime,Larrosa, Igor
-
p. 9638 - 9643
(2018/07/21)
-
- Method for synthesizing benzothiophene derivatives from dihaloarene under microwave irradiation under catalysis of copper
-
The invention discloses a method for synthesizing benzothiophene derivatives from dihaloarene under microwave irradiation under the catalysis of copper. The method comprises the following steps: adding a catalytic amount of a catalyst copper chloride, a ligand 1,10-phenanthroline (1,10-Phen), a cocatalyst potassium hydroxide, 1-bromo-2-iodobenzene and its derivatives, KSCN (potassium thiocyanate),phenylacetylene and pure water, performing a reaction in a microwave reactor at a certain temperature under a certain power for a certain time, performing reduced pressure concentrating, and performing column chromatography purification on the obtained product. The method disclosed in the invention is a method having novel raw materials, being simple to operate and used for efficiently preparingthe benzothiophene derivatives. Compared with the prior art, the method has an obvious faster reaction speed than convectional heating, and has the advantages of mild reaction conditions, simplicity in operation, high yield, safety, low cost and environmental protection.
- -
-
Paragraph 0030; 0069
(2018/09/08)
-
- Arylation method of thiophene compounds
-
The invention provides an arylation method of thiophene compounds. The thiophene compounds are benzothiophene or thiophene, and the benzothiophene represented by formula (1) or thiophene represented by formula (2) and aryl chloride represented by formula
- -
-
Paragraph 0036; 0037; 0038; 0039; 0040; 0041; 0042-0047
(2017/08/28)
-
- N-Heterocyclic carbene-Pd(II)-1-methylimidazole complex catalyzed C[sbnd]H bond arylation of (benzo)thiophenes with aryl chlorides
-
NHC-Pd(II)-Im complex showed efficient catalytic activity toward the direct C[sbnd]H bond arylation of (benzo)thiophenes with the challenging aryl chlorides. Under the suitable conditions, all reactions proceeded smoothly to give the desired C[sbnd]H bond
- Yin, Shun-Chao,Zhou, Quan,He, Qian-Wei,Li, Shu-Wan,Qian, Peng-Cheng,Shao, Li-Xiong
-
p. 427 - 431
(2017/01/13)
-
- Palladium-Catalyzed Direct C2-Arylation of Benzo[ b ]thiophenes with Electron-Rich Aryl Halides: Facile Access to Thienoacene Derivatives
-
Direct coupling reaction of benzo[ b ]thiophene and electron-rich aryl bromides was achieved under Pd 2 (dba) 3 /SPhos catalysis in the presence of NaO t -Bu. The reaction system was applied for the installation of 2-(methylthio)phenyl group onto thiophene-fused polyaromatic molecules, demonstrating facile synthesis of precursors for thienoacene derivatives.
- Ichioka, Fumiki,Itai, Yuhei,Nishii, Yuji,Miura, Masahiro
-
p. 2812 - 2816
(2017/09/30)
-
- Iridium-Catalyzed Asymmetric Hydrogenation of Benzo[b]thiophene 1,1-Dioxides
-
An efficient iridium-catalyzed asymmetric hydrogenation of substituted benzothiophene 1,1-dioxides is described. The use of iridium complexes with chiral pyridyl phosphinite ligands provides access to highly enantiomerically enriched sulfones with substituents at the 2- and 3-position. Sulfones of this type are of interest as core structures of agrochemicals and pharmaceuticals. Moreover, they can be further reduced to chiral 2,3-dihydrobenzothiophenes.
- Tosatti, Paolo,Pfaltz, Andreas
-
supporting information
p. 4579 - 4582
(2017/04/11)
-
- A benzothiophene compound preparation method and its purification method
-
The invention discloses a preparation method for benzothiophene compounds. The preparation method comprises the following steps: 1-bromine(chlorine)-2-styrene benzene or derivatives thereof are used as a substrate; a vulcanizer is added into the substrate
- -
-
Paragraph 0041
(2017/03/28)
-
- Bulky α-diimine palladium complexes: Highly efficient for direct C-H bond arylation of heteroarenes under aerobic conditions
-
Through the strategy to enhance the bulkiness on both the backbone and the N-aryl moieties, we designed and synthesized a type of bulky α-diimine palladium complex (i.e., {[Ar-NC(R)-C(R)N-Ar]PdCl2, (Ar = 2-benzhydryl-4,6-dimethylphenyl)}, C1, R = H; C2, R = An; C3, R = Ph). The structures of these palladium complexes were well characterized, while C1 and C3 were further characterized by X-ray diffraction. The catalytic performances of the precatalysts were screened for direct C-H bond arylation of heteroarenes. The bidentate N,N-palladium complex C3 with both a backbone and N-aryl bulkiness was found to be a highly efficient precatalyst under aerobic conditions. With a low palladium loading of 0.5-0.1 mol%, a variety of heteroarenes with challenging bulky steric aryl bromides as well as heteroaryl bromides are all applicable for this cross-coupling reaction.
- Ouyang, Jia-Sheng,Li, Yan-Fang,Shen, Dong-Sheng,Ke, Zhuofeng,Liu, Feng-Shou
-
p. 14919 - 14927
(2016/10/11)
-
- Aerobic and Efficient Direct Arylation of Five-Membered Heteroarenes and Their Benzocondensed Derivatives with Aryl Bromides by Bulky α-Hydroxyimine Palladium Complexes
-
In the present work, a series of α-hydroxyimine palladium complexes with bulky substituents (i.e., {[Ar-N=C(R)-C(R)2-OH]PdCl2} (C1, R = Me, Ar = 2-diphenylmethyl-4,6-dimethylphenyl; C2, R = Me, Ar = 2,6-bis(diphenylmethyl)-4-methylphenyl; C3, R = Me, Ar = 2,6-bis(diphenylmethyl)-4-methyoxylphenyl; C4, R = Me, Ar = 2,6-bis(diphenylmethyl)-4-chlorophenyl; C5, R = Ph, Ar = 2,6-dimethylphenyl; C6, R = Ph, Ar = 2,6-diisopropylphenyl)) were synthesized and characterized. The structures of palladium complexes C1 and C2 were determined by X-ray diffraction. These bidentate N,O-palladium complexes were applied for direct arylation under aerobic conditions. The effects of the reaction conditions and ligand substitution on the catalytic activity were evaluated. Upon a low palladium loading of 0.5 mol %, the bulky palladium complex C6 was successfully used to catalyze the cross-coupling of a variety of five-membered heteroarenes and their benzo-condensed derivatives with (hetero)aryl bromides. The mechanistic investigation on the direct arylation supported the involvement of a Pd(0)/Pd(II) CMD process.
- Luo, Bao-Tian,Liu, Huan,Lin, Zhi-Jie,Jiang, Jingxing,Shen, Dong-Sheng,Liu, Rui-Zhi,Ke, Zhuofeng,Liu, Feng-Shou
-
p. 4881 - 4894
(2015/11/09)
-
- Direct arylation of benzo[b]furan and other benzo-fused heterocycles
-
The direct arylation of benzo[b]furan, benzo[b]thiophene, and indole has been studied by using aromatic bromides as the aryl source. The protocol employing common reagents and a Pd catalyst has led to the regioselective arylation of these heterocycles at the 2-position. A range of functional groups were tolerated, providing quick access to a variety of arylated benzo-fused heterocycles that would be accessible more elaborately using classical synthetic strategies. This is the first systematic study of the direct arylation of benzo[b]-furan.
- Dao-Huy, Toan,Haider, Maximilian,Glatz, Fabian,Schnürch, Michael,Mihovilovic, Marko D.
-
supporting information
p. 8119 - 8125
(2015/01/09)
-
- General method for functionalized polyaryl synthesis via aryne intermediates
-
A method for base-promoted arylation of arenes and heterocycles by aryl halides and aryl triflates is described. Additionally, in situ electrophilic trapping of ArLi intermediates generated in the reaction of benzyne with deprotonated arenes or heterocycles has been developed, providing rapid and easy access to a wide range of highly functionalized polyaryls. Base-promoted arylation methodology complements transition-metal-catalyzed direct arylation and allows access to structures that are not easily accessible via other direct arylation methods. The reactions are highly functional-group tolerant, with alkene, ether, dimethylamino, trifluoromethyl, ester, cyano, halide, hydroxyl, and silyl functionalities compatible with reaction conditions.
- Truong, Thanh,Mesgar, Milad,Le, Ky Khac Anh,Daugulis, Olafs
-
p. 8568 - 8576
(2014/07/07)
-
- Copper-catalyzed synthesis of benzo[ b ]thiophenes and benzothiazoles using thiocarboxylic acids as a coupling partner
-
An efficient copper-catalyzed approach to benzo[b]thiophene and benzothiazole derivatives using thiocarboxylic acids as a sulfur source has been developed. In the presence of CuI and 1,10-phen, and n-Pr3N as the base, (2-iodobenzyl)triphenylphosphonium bromide and (2-iodophenylimino) triphenylphosphorane reacted smoothly with thiocarboxylic acids to give benzo[b]thiophene and benzothiazole derivatives in good yields via sequential Ullmann-type C-S bond coupling and Wittig condensation.
- Yu, Hui,Zhang, Meishu,Li, Yuzhe
-
p. 8898 - 8903
(2013/09/24)
-
- Pd-catalyzed β-selective direct C-H bond arylation of thiophenes with aryltrimethylsilanes
-
Direct arylation of thiophenes and benzothiophenes with aryltrimethylsilanes was effectively catalyzed by PdCl2(MeCN) 2 in the presence of CuCl2 as an oxidant. The reaction preferentially occurred at the β-position of both
- Funaki, Kenji,Sato, Tetsuo,Oi, Shuichi
-
supporting information
p. 6186 - 6189
(2013/02/23)
-
- Extending the utility of [Pd(NHC)(cinnamyl)Cl] precatalysts: Direct arylation of heterocycles
-
The use of [Pd(NHC)(cinnamyl)Cl] precatalysts in the direct arylation of heterocycles has been investigated. Among four different precatalysts, [Pd(SIPr)(cinnamyl)Cl] proved to be the most efficient promoter of the reaction. The C-H functionalization of sulfuror nitrogen-containing heterocycles has been achieved at low catalyst loadings. These catalyst charges range from 0.1 to 0.01 mol % palladium.
- Martin, Anthony R.,Chartoire, Anthony,Slawin, Alexandra M.Z.,Nolan, Steven P.
-
supporting information
p. 1637 - 1643
(2012/11/07)
-
- Palladium-catalyzed C-S coupling: Access to thioethers, benzo[b]thiophenes, and thieno[3,2-b]thiophenes
-
The first C-S bond formation/cross-coupling/cyclization domino reaction using thiourea as a cheap and easy to handle dihydrosulfide surrogate has been developed. Structurally important biarylthioether, benzo[b]thiophenes, and thieno[3,2-b]thiophene scaffolds are provided in high yield.
- Kuhn, Marius,Falk, Florian C.,Paradies, Jan
-
p. 4100 - 4103
(2011/10/08)
-
- Palladium/tetraphosphine catalyzed suzuki cross-coupling of heteroarylboronic acids with aryl halides
-
(Chemical Equation Presented) cis,cis,cis-1,2,3,4- Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C3H 5)]2 efficiently catalyses the Suzuki reaction of heteroarylboronic acids with aryl bromides and also the coupling of arylboronic acids with heteroaryl bromides. The coupling of thiophene- or benzothiopheneboronic acids, furan- or benzofuranboronic acids and 3-pyridineboronic acid with a variety of aryl bromides gave the corresponding coupling products in good yields. However, in most cases, better results in terms of ratio substrate/catalyst were obtained for the reverse reaction using heteroaryl bromides with arylboronic acids.
- Kondolff, Isabelle,Doucet, Henri,Santelli, Maurice
-
p. 109 - 118
(2008/09/18)
-
- Selective palladium-catalysed ipso arylation of α,α- disubstituted benzo[b]thien-2-ylmethanols with aryl bromides using PCy 3 as ligand
-
α,α-Diphenylbenzo[b]thien-2-ylmethanol was treated with a series of aryl bromides in the presence of palladium(II) acetate and tricyclohexylphosphane to give the appropriate 2-aryl-benzo[b]thiophenes in good to excellent yield with concomitant formation o
- Biro, A. Beatrix,Kotschy, Andras
-
p. 1364 - 1368
(2008/09/18)
-