- MATERIAL FOR HOLE-TRANSPORT LAYER, MATERIAL FOR HOLE-INJECTION LAYER, ORGANIC COMPOUND, LIGHT-EMITTING DEVICE, LIGHT-EMITTING APPARATUS, ELECTRONIC DEVICE, AND LIGHTING DEVICE
-
A material for a hole-transport layer includes a monoamine compound. The first aromatic group, the second aromatic group, and the third aromatic group are bonded to the nitrogen atom of the monoamine compound. The first and second aromatic groups each independently include 1 to 3 benzene rings. One or both of the first and second aromatic groups have one or more hydrocarbon groups each having 1 to 12 carbon atoms each forming a bond only by the sp3 hybrid orbitals. The total number of the carbon atoms in the hydrocarbon group in the first or second aromatic group is 6 or more. The total number of the carbon atoms in all of the hydrocarbon groups in the first and second aromatic groups is 8 or more. The third aromatic group is a substituted or unsubstituted monocyclic condensed ring or a substituted or unsubstituted bicyclic or tricyclic condensed ring.
- -
-
Paragraph 0480
(2021/01/26)
-
- From alkylarenes to anilines via site-directed carbon–carbon amination
-
Anilines are fundamental motifs in various chemical contexts, and are widely used in the industrial production of fine chemicals, polymers, agrochemicals and pharmaceuticals. A recent development for the synthesis of anilines uses the primary amination of C–H bonds in electron-rich arenes. However, there are limitations to this strategy: the amination of electron-deficient arenes remains a challenging task and the amination of electron-rich arenes has a limited control over regioselectivity—the formation of meta-aminated products is especially difficult. Here we report a site-directed C–C bond primary amination of simple and readily available alkylarenes or benzyl alcohols for the direct and efficient preparation of anilines. This chemistry involves a novel C–C bond transformation and offers a versatile protocol for the synthesis of substituted anilines. The use of O2 as an environmentally benign oxidant is demonstrated, and studies on model compounds suggest that this method may also be used for the depolymerization of lignin.
- Liu, Jianzhong,Qiu, Xu,Huang, Xiaoqiang,Luo, Xiao,Zhang, Cheng,Wei, Jialiang,Pan, Jun,Liang, Yujie,Zhu, Yuchao,Qin, Qixue,Song, Song,Jiao, Ning
-
-
- Aromatic amine compound synthesis method
-
The invention discloses an aromatic amine compound synthesis method which is characterized in that the method is implemented according to any of two methods. The first method includes the steps: mixing an alkyl aromatic compound with a general formula (I) and a nitrogen-containing compound with a general formula (II); performing reaction on mixture under an oxidizing agent and an organic solvent to obtain an aromatic amine compound with a general formula (III). The second method includes the steps: mixing an aromatic alcohol derivative with a general formula (I') and the nitrogen-containing compound with the general formula (II); performing reaction on mixture under an acid additive and an organic solvent to prepare the aromatic amine compound with the general formula (III). According to the method, a lot of alkyl aromatic compounds or aromatic alcohol derivatives firstly serve as raw materials, and the raw materials are reacted to generate the aromatic amine compound without the action of metal catalysis. Compared with a traditional synthesis method, the synthesis method has the advantages that the method is high in yield and simple in condition, waste discharging amount is less,metal participation is omitted, a reaction device is simple, industrial production is easily achieved and the like. The method has a wide application prospect.
- -
-
Paragraph 0219-0221
(2019/01/23)
-
- Olefin-Stabilized Cobalt Nanoparticles for C=C, C=O, and C=N Hydrogenations
-
The development of cobalt catalysts that combine easy accessibility and high selectivity constitutes a promising approach to the replacement of noble-metal catalysts in hydrogenation reactions. This report introduces a user-friendly protocol that avoids complex ligands, hazardous reductants, special reaction conditions, and the formation of highly unstable pre-catalysts. Reduction of CoBr2 with LiEt3BH in the presence of alkenes led to the formation of hydrogenation catalysts that effected clean conversions of alkenes, carbonyls, imines, and heteroarenes at mild conditions (3 mol % cat., 2–10 bar H2, 20–80 °C). Poisoning studies and nanoparticle characterization by TEM, EDX, and DLS supported the notion of a heterotopic catalysis mechanism.
- Sandl, Sebastian,Schwarzhuber, Felix,P?llath, Simon,Zweck, Josef,Jacobi von Wangelin, Axel
-
supporting information
p. 3403 - 3407
(2018/02/13)
-
- Structure-activity relationship study of E6 as a novel necroptosis inducer
-
Necroptosis inducers represent a promising potential treatment for drug-resistant cancer. We herein describe the structure modification of E6, which was identified recently as a potent and selective necroptosis inducer. The studies described herein demonstrate for the first time that functionalized biphenyl derivatives possess necroptosis inducer activity. Furthermore, these studies have led to the identification of two promising compounds (5h and 5j) that can be used for further optimization studies as well as mechanism of action investigations.
- Mou, Jianfeng,Park, Ann,Cai, Yu,Yuan, Junying,Yuan, Chengye
-
p. 3057 - 3061
(2015/06/22)
-
- A novel aromatic alkylation of anilines with cyclic and acyclic ketones under hydrothermal conditions
-
A novel aromatic ring-alkylation was achieved by condensation between aniline-HCl salts and cyclic or acyclic ketones under hydrothermal conditions.
- Mehta, Barun K.,Kumamoto, Koji,Yanagisawa, Kazumichi,Kotsuki, Hiyoshizo
-
p. 6953 - 6956
(2007/10/03)
-
- Photochemical conversion of 4-chloroaniline into 4-alkylanilines
-
Irradiation of 4-chloroanilines in the presence of alkenes gives 4-(2′-chloroalkyl)-anilines. When the irradiation is carried out in the presence of NaBH4, 4-alkylanilines are obtained directly. The reaction appears to occur via the corresponding phenyl cation.
- Coppo, Paolo,Fagnoni, Maurizio,Albini, Angelo
-
p. 4271 - 4273
(2007/10/03)
-
- Photoinduced, ionic Meerwein arylation of olefins
-
Irradiation of 4-chloroaniline or of its N,N-dimethyl derivative in polar solvents generates the corresponding triplet phenyl cations. These are trapped by alkenes yielding arylated products in medium to good yields. B3LYP calculations show that the triplet cation slides with negligible activation energy to a bonded adduct with ethylene, whereas it forms only a marginally stabilized CT complex with water (chosen as a representative σ nucleophile). The structure of the final products depends on the preferred path from the adduct cation with the alkene. In the case of aryl olefins, this deprotonates to stilbene derivatives, while, from 2,3-dimethyl-2-butene and allytrimethylsilane, allylanilines are obtained by elimination of an electrofugal group in γ. In the case of mono- and disubstituted alkenes the cation adds chloride rather than eliminating and β-chloroalkylanilines are obtained. The regio- and sterochemistry of the addition across the alkene are best understood with a phenonium ion structure for the adduct. The nucleophile entering in fi can be varied under conditions in which the adduct cation is trapped more efficiently than the starting phenyl cation. Thus, β-methoxyalkylanilines are formed when the irradiation is carried out in methanol. β-Iodoalkylanilines are obtained in acetonitrile containing iodide and unsubstituted alkylanilines in the presence of sodium borohydride. A case of intramolecular nucleophilic trapping is found with 4-pentenoic acid. The reaction is a wide-scope ionic analogue of the radicalic Meerwin arylation of olefins.
- Mella,Coppo,Guizzardi,Fagnoni,Freccero,Albini
-
p. 6344 - 6352
(2007/10/03)
-
- Method for preparing aromatic secondary amino compound
-
Disclosed are (1) a method for preparing an aromatic secondary amino compound which comprises reacting an N-cyclohexylideneamino compound in the presence of a hydrogen moving catalyst and a hydrogen acceptor by the use of a sulfur-free polar solvent and/or a cocatalyst, and (2) a method for preparing an aromatic secondary amino compound which comprises reacting cyclohexanone or a nucleus-substituted cyclohexanone, an amine and a nitro compound corresponding to the amine in a sulfur-free polar solvent in the presence of a hydrogen moving catalyst, a cocatalyst being added or not added. In a further aspect, a method is provided for the preparation of aminodiphenylamine by reacting phenylenediamine and cyclohexanone in the presence of a hydrogen transfer catalyst in a sulfur-free polar solvent while using nitroaniline as a hydrogen acceptor.
- -
-
-
- Method for preparing aromatic secondary amino compound
-
Disclosed are (1) a method for preparing an aromatic secondary amino compound which comprises reacting an N-cyclohexylideneamino compound in the presence of a hydrogen moving catalyst and a hydrogen acceptor by the use of a sulfur-free polar solvent and/or a cocatalyst, and (2) a method for preparing an aromatic secondary amino compound which comprises reacting cyclohexanone or a nucleus-substituted cyclohexanone, an amine and a nitro compound corresponding to the amine in a sulfur-free polar solvent in the presence of a hydrogen moving catalyst, a cocatalyst being added or not added.
- -
-
-
- Synthesis of Certain Mesogenic Azomethines Derived from 4-Cycloalkylanilines and from 4-Cycloalkylbenzaldehydes
-
General procedures are described for the synthesis of members of five pairs of related homologous series of mesogenic azomethines differing in the mode of linkage of the CH=N group and containing a cycloalkyl group in a terminal position.
- Byron, D. J.,Matharu, A. S.,Rees, M.,Wilson, R. C.
-
p. 229 - 238
(2007/10/02)
-
- Antibacterial water-soluble cutting fluids resistant to yeast-like fungi
-
A bactericide is added to conventional water-soluble cutting fluids to suppress deterioration by micro-organisms. Such fluids are however accompanied by the drawbacks that the bactericide has a narrow antibacterial spectrum and moreover its effects last a short time. It is the object of the present invention to offers water--soluble cutting fluids which remain resistant to a wide variety of microorganisms for a long time. The present invention therefore offers water-soluble cutting fluids to which has been added a specific amine selected from amines known to date.
- -
-
-
- Properties of the Liquid Crystals Formed by Ceratin Azomethines Derived from 4-Cycloalkylanilines and from 4-Cycloalkylbenzaldehydes
-
The liquid crystal behaviour of four homologous series of azomethines related to the nO.m series but containing a cycloalkyl group, is reported and discussed.Many of these compounds show extensive smectic polymorphism, one member of the nO.c6 series giving rise to five smectic polymorphic modofications for which phase type assignments have been made by thermal optical microscopy.Keywords: smectic polymorphism, azomethines, cycloalkyl derivatives
- Brown, J. W.,Byron, D. J.,Southcott, M.,Wilson, R. C.,Guillon, D.,et al.
-
-
- Hydroalkylation of Aniline with Pd-Al2O3 and NaCl-AlCl3
-
The hydroalkylation of aniline in a palladium-fused salt system was examined under hydrogen pressure.By using 0.5percent Pd-Al2O3 and fused salt (NaCl-AlCl3), N-cyclohexylaniline (4) was formed as the main product at temperatures below 300 deg C; at higher temperatures, the cyclohexyl group rearranged to form nuclear alkylated products, o- and p-cyclohexylaniline, (5) and (6).The yield of 4 was 27.7percent at 280 deg C; those of 5 and 6 were 5.4 and 7.3percent, respectively, at 400 deg C.The reaction mechanism for the hydroalkylation of aniline with this catalytic system is discussed.
- Kamiyama, Tsutomi,Enomoto, Saburo,Inoue, Masami
-
p. 777 - 781
(2007/10/02)
-
- Chemical process
-
Aromatic amines (e.g., aniline) are selectively alkylated in an ortho nuclear position by reaction with an olefin (e.g., ethylene) in the presence of an aluminum anilide catalyst. Hydrogen halides (e.g., HCl) are added to increase the reaction rate.
- -
-
-
