- Rhodium-Catalyzed Asymmetric Allenylation of Sulfonylimines and Application to the Stereospecific Allylic Allenylation
-
The rhodium-catalyzed asymmetric allenylation of sulfonylimines is disclosed providing silyl homoallenylamide products in up to 99:1 er. Through subsequent activation of the C?N bond of the silyl homoallenyl sulfonamide, palladium-catalyzed stereospecific
- Sieber, Joshua D.,Angeles-Dunham, Veronica V.,Chennamadhavuni, Divya,Fandrick, Daniel R.,Haddad, Nizar,Grinberg, Nelu,Kurouski, Dimitry,Lee, Heewon,Song, Jinhua J.,Yee, Nathan K.,Mattson, Anita E.,Senanayake, Chris H.
-
-
Read Online
- Nickel(II)-Catalyzed Selective (E)-Olefination of Methyl Heteroarenes Using Benzyl Alcohols via Acceptorless Dehydrogenative Coupling Reaction
-
An efficient catalytic protocol for the synthesis of selective (E)-olefins by the newly synthesized nickel complexes via greener acceptorless dehydrogenative coupling methodology is presented. Two nickel(II) N, S chelating complexes were structurally characterized with the aid of spectral and single crystal X-ray diffraction methods. Olefination of 2-methylheteroarenes with benzyl alcohols via acceptorless dehydrogenative coupling is achieved by inexpensive nickel(II) catalysts. The present olefination protocol is simple and furnishes the desired 2-alkenylheteroarenes in 35 h and yields in the range of 40–93 %. The dehydrogenative coupling reaction proceeds via the generation of an aldehyde intermediate and produces water and hydrogen as sole by-products. The wide substrate scope of this catalytic reaction covered the synthesis of drug intermediates.
- Balamurugan, Gunasekaran,Ramesh, Rengan
-
-
- A Magnetically Recyclable Palladium-Catalyzed Formylation of Aryl Iodides with Formic Acid as CO Source: A Practical Access to Aromatic Aldehydes
-
A magnetically recyclable palladium-catalyzed formylation of aryl iodides under CO gas-free conditions has been developed by using a bidentate phosphine ligand-modified magnetic nanoparticles-anchored- palladium(II) complex [2P-Fe 3O 4@SiO 2-Pd(OAc) 2] as catalyst, yielding a wide variety of aromatic aldehydes in moderate to excellent yields. Here, formic acid was employed as both the CO source and the hydrogen donor with iodine and PPh 3as the activators. This immobilized palladium catalyst can be obtained via a simple preparative procedure and can be facilely recovered simply by using an external magnetic field, and reused at least 9 times without any apparent loss of catalytic activity.
- You, Shengyong,Zhang, Rongli,Cai, Mingzhong
-
p. 1962 - 1970
(2021/01/25)
-
- New method for promoting photosensitive oxidation to remove 1, 2-mercaptoethanol acetal protecting group by utilizing visible light irradiation
-
The invention discloses a new method for removing a 1, 2-mercaptoethanol acetal protecting group, and belongs to the field of organic synthetic chemistry. The method comprises the following steps of:under a room-temperature open system, adding a substrate 2-substituted-1, 3-oxo-thio-cyclopentane and a catalytic amount of a photosensitizer Eosin Y into a proper amount of acetonitrile; and performing irradiating with a blue LED lamp for 3 hours while stirring to obtain the corresponding aldehyde compound with favorable yield. The method has the advantages of mild operation conditions, greenness, environmental protection, no harsh water and oxygen removal operation and device, realization of the reaction at room temperature, high substrate conversion rate, simple and easy post-treatment, andprovides a good method for removing the 1, 2-mercaptoethanol acetal protecting group at present.
- -
-
Paragraph 0014-0016
(2021/01/30)
-
- One-Pot Direct Oxidation of Primary Amines to Carboxylic Acids through Tandem ortho-Naphthoquinone-Catalyzed and TBHP-Promoted Oxidation Sequence
-
Biomimetic oxidation of primary amines to carboxylic acids has been developed where the copper-containing amine oxidase (CuAO)-like o-NQ-catalyzed aerobic oxidation was combined with the aldehyde dehydrogenase (ALDH)-like TBHP-mediated imine oxidation protocol. Notably, the current tandem oxidation strategy provides a new mechanistic insight into the imine intermediate and the seemingly simple TBHP-mediated oxidation pathways of imines. The developed metal-free amine oxidation protocol allows the use of molecular oxygen and TBHP, safe forms of oxidant that may appeal to the industrial application.
- Kim, Hun Young,Oh, Kyungsoo,Si, Tengda
-
supporting information
p. 18150 - 18155
(2021/12/09)
-
- Nitrosoarene-Catalyzed HFIP-Assisted Transformation of Arylmethyl Halides to Aromatic Carbonyls under Aerobic Conditions
-
A rare metal-free nucleophilic nitrosoarene catalysis accompanied by highly hydrogen-bond-donor (HBD) solvent, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), organocatalytically converts arylmethyl halides to aromatic carbonyls. This protocol offers an effective means to access a diverse array of aromatic carbonyls with good chemoselectivity under mild reaction conditions. The activation of arylmethyl halides by HFIP to generate stable carbocation and autoxidation of in situ generated hydroxylamine to nitrosoarene in the presence of atmospheric O2 are the keys to success.
- Pradhan, Suman,Sharma, Vishali,Chatterjee, Indranil
-
supporting information
p. 6148 - 6152
(2021/08/03)
-
- Zirconium-based metal-organic framework as an efficiently heterogeneous photocatalyst for oxidation of benzyl halides to aldehydes
-
The development of efficient heterogeneous catalysts for fine chemical synthesis is critical for practical applications. Herein, for the first time, the zirconium-based metal-organic framework (UiO-66-NH2) is applied as an efficiently heterogeneous photocatalyst for conversion of benzyl halides to corresponding aldehydes with high selectivity (about 80 %) and conversion (up to 99 %) in the presence of oxygen and DMF as solvent. Through a series of experiments and analysis, the reaction mechanism is proposed to involve nucleophilic attack of the N-oxide. This study provides a general, environmental and high selective method to prepare benzaldehydes and broadens the application fields of UiO-66-NH2.
- Xue, Ping,Huang, Jiming,Lin, Liguang,Li, Rong,Tang, Mi,Wang, Zhengbang
-
-
- METHOD FOR OXIDATIVE CLEAVAGE OF COMPOUNDS WITH UNSATURATED DOUBLE BOND
-
A method for oxidative cleavage of a compound with an unsaturated double bond is provided. The method includes the steps of: (A) providing a compound (I) with an unsaturated double bond, a trifluoromethyl-containing reagent, and a catalyst; wherein, the catalyst is represented by Formula (II): M(O)mL1yL2z??(II);wherein, M, L1, L2, m, y, z, R1, R2 and R3 are defined in the specification; and(B) mixing the compound with an unsaturated double bond and the trifluoromethyl-containing reagent to perform an oxidative cleavage of the compound with the unsaturated double bond by using the catalyst in air or under oxygen atmosphere condition to obtain a compound represented by Formula (III):
- -
-
Paragraph 0071; 0077
(2021/07/10)
-
- METHOD FOR OXIDATIVE CLEAVAGE OF COMPOUNDS WITH UNSATURATED DOUBLE BOND
-
A method for oxidative cleavage of a compound with an unsaturated double bond is provided. The method comprises the following step: (A) providing a compound (I) with an unsaturated double bond, a reagent with trifluoromethyl, and a catalyst; wherein the catalyst is represented by the following formula (II): M(O)mL1yL2z (II); wherein, M, L1, L2, m, y, z, R1, R2 and R3 are defined in the specification; and (B) mixing the compound with an unsaturated double bond and the reagent with a trifluoromethyl to perform an oxidation of the compound with the unsaturated double bond by using the catalyst at air or an oxygen condition to get a compound presented as formula (III):
- -
-
Paragraph 0053-0054; 0062-0063
(2021/03/19)
-
- Selective oxidation of alkenes to carbonyls under mild conditions
-
Herein, a practical and sustainable method for the synthesis of aldehydes, ketones, and carboxylic acids from an inexpensive olefinic feedstock is described. This transformation features very sustainable and mild conditions and utilizes commercially available and inexpensive tetrahydrofuran as the additive, molecular oxygen as the sole oxidant and water as the solvent. A wide range of substituted alkenes were found to be compatible, providing the corresponding carbonyl compounds in moderate-to-good yields. The control experiments demonstrated that a radical mechanism is responsible for the oxidation reaction.
- Huo, Jie,Xiong, Daokai,Xu, Jun,Yue, Xiaoguang,Zhang, Pengfei,Zhang, Yilan
-
supporting information
p. 5549 - 5555
(2021/08/16)
-
- A highly stable metal-organic framework with cubane-like clusters for the selective oxidation of aryl alkenes to aldehydes or ketones
-
Triazine derivatives, a class of electron-deficient π-conjugated molecules with high photochemical activity and excellent luminescent characteristics, have been utilized as a kind of electron-acceptor for the construction of molecular cages, luminescent and photochromic materials. In this paper, a novel and highly stable MOF with cubane-like clusters, [Co4(SO4)3(F)3(tpt)2(tatb)] (1) (tpt = 2,4,6-tris-(4-pyridyl)-1,3,5-triazine, H3tatb = 4,4′,4′′-(1,3,5-triazine-2,4,6-triyl)tribenzoic acid), has been successfully synthesized based on a triazine derivative, and possesses unprecedented sulfate- and fluoride-bridged cubane-type tetranuclear cobalt clusters and a 3D + 3D → 3D open framework. Compound1shows a rather high BET surface area and exhibits excellent thermal stability and high chemical stability in common solvents and even in acidic or basic solutions (in a pH range from 4 to 12). Moreover, catalytic measurements show that compound1is an excellent heterogeneous catalyst for the selective oxidation of aryl alkenes to aldehydes or ketones with conversions of 97%.
- He, Chixian,Liu, Jiaming,Liu, Jian-Jun,Liu, Teng,Shen, Xianfu,Shen, Xiang
-
p. 4667 - 4673
(2021/07/11)
-
- PhIO-Mediated oxidative dethioacetalization/dethioketalization under water-free conditions
-
Treatment of thioacetals and thioketals with iodosobenzene in anhydrous DCM conveniently afforded the corresponding carbonyl compounds in high yields under water-free conditions. The mechanistic studies indicate that this dethioacetalization/dethioketalization process does not need water and the oxygen of the carbonyl products comes from the hypervalent iodine reagent.
- Du, Yunfei,Ouyang, Yaxin,Wang, Xi,Wang, Xiaofan,Yu, Zhenyang,Zhao, Bingyue,Zhao, Kang
-
-
- Rapid, chemoselective and mild oxidation protocol for alcohols and ethers with recyclable N-chloro-N-(phenylsulfonyl)benzenesulfonamide
-
Chlorine is the 20th most abundant element on the earth compared to bromine, iodine, and fluorine, a sulfonimide reagent, N-chloro-N-(phenylsulfonyl)benzenesulfonamide (NCBSI) was identified as a mild and selective oxidant. Without activation, the reagent was proved to oxidize primary and secondary alcohols as well as their symmetrical and mixed ethers to corresponding aldehydes and ketones. With recoverable PS-TEMPO catalyst, selective oxidation over chlorination of primary and secondary alcohols and their ethers with electron-donating substituents was achieved. The reagent precursor of NCBSI was recovered quantitatively and can be reused for synthesizing NCBSI.
- Badani, Purav,Chaturbhuj, Ganesh,Ganwir, Prerna,Misal, Balu,Palav, Amey
-
supporting information
(2021/06/03)
-
- Novel oxovanadium and dioxomolybdenum complexes of tridentate ONO-donor Schiff base ligand: Synthesis, characterization, crystal structures, Hirshfeld surface analysis, DFT computational studies and catalytic activity for the selective oxidation of benzyl
-
Two new oxovanadium and dioxomolybdenum Schiff base complexes, [VvO(L)(OCH3)(CH3OH)] and [MoVIO2(L)(CH2CH3OH)], were synthesized by treating an ONO-donor type Schiff base ligand
- Amiri Rudbari, Hadi,Ashfaq, Muhammad,Behjatmanesh-Ardakani, Reza,Fallah-Mehrjardi, Mehdi,Forootan, Pooran,Kargar, Hadi,Nawaz Tahir, Muhammad,Shahzad Munawar, Khurram
-
-
- Synthesis, characterization, crystal structures, Hirshfeld surface analysis, DFT computational studies and catalytic activity of novel oxovanadium and dioxomolybdenum complexes with ONO tridentate Schiff base ligand
-
For the first time, two new oxovanadium and dioxomolybdenum Schiff base complexes, VOL(OMe) and MoO2L, were synthesized through the reaction of a ONO tridentate Schiff base ligand (H2L) derived from the condensation of 5-bromosalicyl
- Kargar, Hadi,Bazrafshan, Maryam,Fallah-Mehrjardi, Mehdi,Behjatmanesh-Ardakani, Reza,Rudbari, Hadi Amiri,Munawar, Khurram Shahzad,Ashfaq, Muhammad,Tahir, Muhammad Nawaz
-
-
- A new porous Co(ii)-metal-organic framework for high sorption selectivity and affinity to CO2and efficient catalytic oxidation of benzyl alcohols to benzaldehydes
-
Herein, we report a new 3D porous Co(ii)-based metal-organic framework catalyst (Me2NH2)2[Co3(L)2(H2O)2]·2DMF (MOF I), which has been successfully prepared by using Co(ii) ions and rigid V-shaped 3,5-di(2,4-dicarboxylphenyl)pyridine (H4L) via the solvothermal reaction. Structural analysis reveals that I displays a porous structure with the pore size of 16.2 × 7.2 ?2 based on the trinuclear [Co3(COO)4(H2O)2N2] secondary building units (SBUs). Gas sorption experiments on the guest free sample I′ reveals a high capacity and selectivity to CO2 over CH4. And further, the catalytic explorations of the I′-catalyzed system (I′: 3 mol%; proline: 40 mol%; CH3CN: 2 mL) reveal that benzyl alcohols with different structures can be efficiently transformed into benzyl alcohols without by-products under mild conditions.
- Wu, Yun-Long,Yang, Rong-Rong,Yang, Guo-Ping,Yan, Yang-Tian,Su, Xiao-Lei,He, Xin-Hai,Song, Yan-Yan,Ma, Zheng-Sheng,Wang, Yao-Yu
-
p. 3717 - 3723
(2021/05/31)
-
- Synthesis, spectral characterization, SC-XRD, HSA, DFT and catalytic activity of a dioxidomolybdenum complex with aminosalicyl-hydrazone Schiff base ligand: An experimental and theoretical approach
-
A new dioxidomolybdenum(VI) complex has been successfully prepared by the reaction of an ONO donor Schiff base, derived by condensing 4-amino-2-hydroxybenzohydrazide and 3-methoxysalicylaldehyde, with MoO2(acac)2. The structures of s
- Kargar, Hadi,Fallah-Mehrjardi, Mehdi,Behjatmanesh-Ardakani, Reza,Munawar, Khurram Shahzad,Ashfaq, Muhammad,Tahir, Muhammad Nawaz
-
-
- Selective oxidation of benzyl alcohols to benzaldehydes catalyzed by dioxomolybdenum Schiff base complex: synthesis, spectral characterization, crystal structure, theoretical and computational studies
-
A novel dioxomolybdenum Schiff base complex, MoO2L·DMF, was synthesized by treating MoO2(acac)2 with an ONO donor Schiff base ligand (H2L) derived by the condensation of 4-aminobenzohydrazide and 3-methoxysalicy
- Kargar, Hadi,Fallah-Mehrjardi, Mehdi,Behjatmanesh-Ardakani, Reza,Munawar, Khurram Shahzad,Ashfaq, Muhammad,Tahir, Muhammad Nawaz
-
p. 437 - 455
(2021/05/13)
-
- Fe(III) superoxide radicals in halloysite nanotubes for visible-light-assisted benzyl alcohol oxidation and oxidative C[sbnd]C coupling of 2-naphthol
-
Selective oxidation of benzyl alcohols to aldehydes and 2-naphthol to BINOL was achieved by activation of molecular oxygen (O2) and hydrogen peroxide (H2O2) over an iron-oxide catalyst embedded in halloysite nanotube. Electron spin resonance spectroscopy (ESR), Raman and in situ FTIR spectroscopic analysis provided direct evidence for the involvement of superoxide radical bound FeIII species in the oxidation reaction. Both the analysis suggested the end-on binding of superoxide radical with FeIII-centre. The stability of such radical bound FeIII-species in halloysite nanotube was analyzed through density functional theory (DFT) calculations. Results suggested that end-on (η1) binding was favourable by 13.5 kcal/ mol than the side-on (η2) binding mode. The formation of such reactive species was believed to play the crucial role in bringing the high selectivity in the catalytic oxidation of benzyl alcohol and oxidative C[sbnd]C coupling of 2-naphthol. UV–Vis spectroscopic studies on the oxidation of benzyl alcohol suggested for the initial adsorption of substrate molecule on the catalyst surface followed by its interaction with FeIII -superoxide/hydroperoxide species generated upon photoirradiation with visible light in presence of O2. The presence of a suitable band gap ~2.14 eV enabled the catalyst to catalyze the reaction under visible light irradiation. Both the reactions (benzyl alcohol and 2-naphthol oxidation) were tested in presence of both O2 and H2O2 as oxidants at ambient temperature. The influence of different parameters like rate of oxygen flow, amount of peroxide, nature of solvent, and catalyst amount on the conversion and selectivity of the reactions were studied to understand their role in the catalytic reactions. Successful oxidation of 2-naphthol with H2O2 as oxidant was a real success to overcome the limitations associated with this reaction using H2O2 as oxidant.
- Bania, Kusum K.,Baruah, Manash J.,Bora, Tonmoy J.,Dutta, Rupjyoti,Guha, Ankur Kanti,Roy, Subhasish
-
-
- Catalytic study of the copper-based magnetic nanocatalyst on the aerobic oxidation of alcohols in water
-
A copper-based magnetic nanocatalyst has been prepared by co-precipitation method and characterized by FESEM, EDS, TEM, XRD, XRF, ICP–OES, FTIR, and BET analysis. This new nanocatalyst displays a good activity toward the aerobic oxidation of a wide range of alcohols in water. Moreover, it is recyclable up to five following runs by simple filtration without any significant loss of its catalytic activity.
- Dehkordi, S. Saeid Saei,Albadi, Jalal,Jafari, Abbas Ali,Samimi, Heshmat Allah
-
p. 2527 - 2538
(2021/03/24)
-
- Introduction of a trinuclear manganese(iii) catalyst on the surface of magnetic cellulose as an eco-benign, efficient and reusable novel heterogeneous catalyst for the multi-component synthesis of new derivatives of xanthene
-
In this work, the new trinuclear manganese catalyst defined as Fe3O4@NFC@NNSM-Mn(iii) was successfully manufactured and fully characterized by different techniques, including FT-IR, XRD, TEM, SEM, EDX, VSM, and ICP analysis. There have been reports of the use of magnetic catalysts for the synthesis of xanthine derivatives. The critical potential interest in the present method include short reaction time, high yields, recyclability of the catalyst, easy workup, and the ability to sustain a variety of functional groups, which give economical as well as ecological rewards. Also, the synthesized catalyst was used as a recyclable trinuclear catalyst in alcohol oxidation reactions at 40 °C. The magnetic catalyst activity of Fe3O4@NFC@NNSM-Mn(iii) could be attributed to the synergistic effects of the catalyst Fe3O4@NFC@NNS-Mn(iii) with melamine. Employing a sustainable and safe low temperature, using an eco-friendly solvent, no need to use any additive, and long-term stability and magnetic recyclability of the catalyst for at least six successive runs are the advantages of the current protocol towards green chemistry. This protocol is a benign, environmentally friendly method for heterocycle synthesis. This journal is
- Ghamari Kargar, Pouya,Bagherzade, Ghodsieh,Eshghi, Hossein
-
p. 4339 - 4355
(2021/02/03)
-
- Robust, highly active, and stable supported Co(ii) nanoparticles on magnetic cellulose nanofiber-functionalized for the multi-component reactions of piperidines and alcohol oxidation
-
The new recyclable cobalt three-core magnetic catalyst obtained by anchoring a Schiff base ligand sector and cellulose nanofiber slings on MNP (Fe3O4) was prepared and named as MNP@CNF@ATSM-Co(ii). Separately, MNPs and CNF have adsorbent properties of great interest. In this way, this catalyst was designed to synthesize piperidine derivatives under solvent-free conditions and alcohol oxidation reactions in EtOH as the solvent. It should be noted that this catalyst is environmentally safe and does not need an external base. This MNPs@CNF@ATSM-Co(ii) separable catalyst has been evaluated using various characterization techniques such as FT-IR, XRD, FE-SEM, EDX, EDS, ICP, TGA, DLS, HRTEM, and VSM. The catalyst was compatible with a variety of benzyl alcohols, benzaldehydes, and amines derivatives, and gave complimentary coupling products with sufficient interest for all of them. The synergistic performance of Co (trinuclear) in the catalyst was demonstrated and its different homologs such as MNPs, MNPs@CNF, MNPs@CNF@ATS-Co(ii), and MNPs@CNF@ATSM-Co(ii) were separately synthesized and applied to a model reaction, and then their catalytic activity was investigated. Also, the performance of these components for the oxidation reaction of alcohols was evaluated. The advantages of the current protocol include the use of a sustainable and safe low temperature, eco-friendly solvent no additive, and long-term stability and magnetic recyclability of the catalyst for at least five successive runs, thus following green chemistry principles. This protocol is a benign and environment-friendly method for oxidation and heterocycle synthesis. This powerful super-magnetic catalyst can use its three arms to advance the reactions, displaying its power for multi-component reactions and oxidation.
- Bagherzade, Ghodsieh,Ghamari Kargar, Pouya
-
p. 23192 - 23206
(2021/07/13)
-
- Selective aerobic oxidation of benzylic and allylic alcohols catalyzed by Cu(OAc)2/TEMPO/Et2NH
-
Selective oxidation of benzylic and allylic alcohols to their corresponding aldehyde/ketone derivative without affecting saturated alcohols is still a challenging endeavor in organic synthesis. Various metal complexes, especially the copper complexes in the presence of TEMPO are being used very often for such transformations under aerobic conditions, but they are not selective to allylic and benzylic alcohols. The use of copper salt for oxidation of alcohols in the absence of a ligand are very scarcely studied except for the one catalyzed by CuCl/TEMPO where chloride inhibition and lack of selective oxidation have been noted upon use of CuCl2. Herein we report a Cu(OAc)2 catalyzed and TEMPO mediated selective aerobic oxidation of benzylic and allylic alcohols to aldehyde/ketone in the presence of Et2NH. The method avoids pre-synthesis of the catalyst as in the case of Cu(II)/(I) complexes/TEMPO catalyzed oxidation reactions, requires low catalyst loading, employs cheaper copper salt, and gives excellent selectivity for oxidation of benzylic and allylic alcohols.
- Bez, Ghanashyam,Gogoi, Achinta,Pasupuleti, Bala Gangadhar
-
p. 589 - 597
(2021/09/28)
-
- Visible light photoredox catalyzed deprotection of 1,3-oxathiolanes
-
An efficient visible light photoredox catalyzed aerobic deprotection of 1,3-oxathiolanes using organic dye Eosin Y as a photocatalyst is disclosed. The deprotection procedure features the use of a metal-free catalyst, mild conditions, a broad range of substrate scope, and good functional group tolerance. 35 examples were tested under the standard conditions and most of them afforded the deprotected products in modest to high yields.
- Yang, Mingyang,Xing, Zhimin,Fang, Bowen,Xie, Xingang,She, Xuegong
-
supporting information
p. 288 - 291
(2020/01/13)
-
- Revealing the A-Site Effect of Lead-Free A3Sb2Br9 Perovskite in Photocatalytic C(sp3)?H Bond Activation
-
The lead-free halide perovskite A3Sb2Br9 is utilized as a photocatalyst for the first time for C(sp3)?H bond activation. A3Sb2Br9 nanoparticles (A3Sb2Br9 NPs) with different ratios of Cs and CH3NH3 (MA) show different photocatalytic activities for toluene oxidation and the photocatalytic performance is enhanced when increasing the amount of Cs. The octahedron distortion caused by A-site cations can change the electronic properties of X-site ions and further affect the electron transfer from toluene molecules to Br sites. After the regulation of A-site cations, the photocatalytic activity is higher with A3Sb2Br9 NPs than that with classic photocatalysts (TiO2, WO3, and CdS). The main active species involved in photocatalytic oxidation of toluene are photogenerated holes (h+) and superoxide anions (.O2?). The octahedron distortion by A-site cations affecting photocatalytic activity remains unique and is also a step forward for understanding more about halide-perovskite-based photocatalysis. The relationship between octahedron distortion and photocatalysis can also guide the design of new photocatalytic systems involving other halide perovskites.
- Chen, Langxing,Li, Qi,Wang, Yingying,Xu, Dongsheng,Yang, Lanlan,Yang, Yuying,Zhang, Zhenzhen
-
supporting information
p. 18136 - 18139
(2020/08/19)
-
- Nanoaggregate Probe for Breast Cancer Metastasis through Multispectral Optoacoustic Tomography and Aggregation-Induced NIR-I/II Fluorescence Imaging
-
An activatable nanoprobe for imaging breast cancer metastases through near infrared-I (NIR-I)/NIR-II fluorescence imaging and multispectral optoacoustic tomography (MSOT) imaging was designed. With a dihydroxanthene moiety serving as the electron donor, quinolinium as the electron acceptor and nitrobenzyloxydiphenylamino as the recognition element, the probe can specifically respond to nitroreductase and transform into an activated D-π-A structure with a NIR emission band extending beyond 900 nm. The activated nanoprobe exhibits NIR emission enhanced by aggregation-induced emission (AIE) and produces strong optoacoustic signal. The nanoprobe was used to detect and image metastases from the orthotopic breast tumors to lymph nodes and then to lung in two breast cancer mouse models. Moreover, the nanoprobe can monitor the treatment efficacy during chemotherapeutic course through fluorescence and MSOT imaging.
- Ouyang, Juan,Sun, Lihe,Wu, Shuizhu,Zeng, Cheng,Zeng, Fang,Zeng, Zhuo
-
supporting information
p. 10111 - 10121
(2019/12/24)
-
- Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas
-
The reductive carbonylation of aryl iodides to aryl aldehydes possesses broad application prospects. We present an efficient and facile Rh-based catalytic system composed of the commercially available Rh salt RhCl3·3H2O, PPh3 as phosphine ligand, and Et3N as the base, for the synthesis of arylaldehydes via the reductive carbonylation of aryl iodides with CO and H2 under relatively mild conditions with a broad substrate range affording the products in good to excellent yields. Systematic investigations were carried out to study the experimental parameters. We explored the optimal ratio of Rh salt and PPh3 ligand, substrate scope, carbonyl source and hydrogen source, and the reaction mechanism. Particularly, a scaled-up experiment indicated that the catalytic method could find valuable applications in industrial productions. The low gas pressure, cheap ligand and low metal dosage could significantly improve the practicability in both chemical researches and industrial applications.
- Chen, Suqing,Liu, Zhenghui,Mu, Tiancheng,Wang, Peng,Yan, Zhenzhong,Yu, Dongkun,Zhao, Xinhui
-
p. 645 - 656
(2020/05/14)
-
- Cerium(IV) Carboxylate Photocatalyst for Catalytic Radical Formation from Carboxylic Acids: Decarboxylative Oxygenation of Aliphatic Carboxylic Acids and Lactonization of Aromatic Carboxylic Acids
-
We found that in situ generated cerium(IV) carboxylate generated by mixing the precursor Ce(OtBu)4 with the corresponding carboxylic acids served as efficient photocatalysts for the direct formation of carboxyl radicals from carboxylic acids under blue light-emitting diodes (blue LEDs) irradiation and air, resulting in catalytic decarboxylative oxygenation of aliphatic carboxylic acids to give C-O bond-forming products such as aldehydes and ketones. Control experiments revealed that hexanuclear Ce(IV) carboxylate clusters initially formed in the reaction mixture and the ligand-to-metal charge transfer nature of the Ce(IV) carboxylate clusters was responsible for the high catalytic performance to transform the carboxylate ligands to the carboxyl radical. In addition, the Ce(IV) carboxylate cluster catalyzed direct lactonization of 2-isopropylbenzoic acid to produce the corresponding peroxy lactone and ?3-lactone via intramolecular 1,5-hydrogen atom transfer (1,5-HAT).
- Hirosawa, Keishi,Mashima, Kazushi,Satoh, Tetsuya,Shinohara, Koichi,Shirase, Satoru,Tamaki, Sota,Tsurugi, Hayato
-
supporting information
(2020/03/25)
-
- Visible-light mediated facile dithiane deprotection under metal free conditions
-
Visible light mediated facile and selective dithiane deprotection under metal free conditions is developed. Eosin Y (1 mol%) proved to be an effective catalyst for the dithiane deprotection under the ambient photoredox conditions. The standard household compact fluorescent light source (CFL bulb) proved to be effective under open-air conditions in aqueous acetonitrile at room temperature. The protocol that exhibits a broad substrate scope and functional group tolerance has been shown to expand to a range of transformations for the electron-rich and -deficient thioacetals and thioketals. The synthetic utility of this protocol has also been demonstrated by gram-scale application.
- Dharpure, Pankaj D.,Bhowmick, Anindita,Warghude, Prakash K.,Bhat, Ramakrishna G.
-
-
- One-pot, oxidative and selective conversion of benzylic silyl and tetrahydropyranyl ethers to gem-dichlorides using trichloroisocyanuric acid and triphenylphosphine as an efficient and neutral system
-
A one-pot and oxidative method is described for the first time for the conversion of benzylic trimethylsilyl (TMS) and tetrahydropyranyl (THP) ethers to gem-dichlorides using trichloroisocyanuric acid (TCCA) and triphenylphosphine (PPh3) in neutral media. Various theses substrates containing electron withdrawing or donating groups can be efficiently converted to their corresponding gem-dichlorides in good to excellent yields. The present method shows a high degree of chemoselectivity, and due to its one-pot nature is in accordance with green chemistry.
- Khadem Moghaddam, Roqayeh,Aghapour, Ghasem
-
p. 398 - 406
(2020/11/19)
-
- Spinel Structured Copper Ferrite Nano Catalyst with Magnetic Recyclability for Oxidative Decarboxylation of Phenyl Acetic Acids
-
Abstract: A simple, efficient and environmentally benign method has been discussed for the synthesis of aldehydes and ketones by the oxidative decarboxylation of phenylacetic acid under ligand free condition using simple, efficient, preparatively easy, magnetically recoverable and low cost spinel CuFe2O4 nanoparticles. The catalyst was characterised using powder-XRD, FTIR, FE-SEM, EDX, VSM and HRTEM. The recyclability was examined and the results showed that the catalyst remained almost equally active up to five consecutive cycles. Graphic Abstract: Spinel Structured Copper Ferrite is a very efficient nano catalyst for Oxidative decarboxylation of Phenyl acetic acids and can be reused up to five cycles without significant loss in catalytic activity.[Figure not available: see fulltext.].
- Rahman, Taskia,Borah, Geetika,Gogoi, Pradip K.
-
p. 2267 - 2272
(2020/02/18)
-
- FeCl3-catalyzed oxidative decarboxylation of aryl/heteroaryl acetic acids: Preparation of selected API impurities
-
There is an ever-increasing demand for impurity compounds for use in impurity profiling as regulatory agencies seek information during registration. Herein, we report the FeCl3-catalyzed oxidative decarboxylation of aryl- and heteroaryl acetic acids to the corresponding carbonyl compounds. A variety of useful aldehydes and ketones were prepared in a simple one-pot transformation by employing an environmentally benign, low-cost, and readily available iron salt. The utility of this method has been demonstrated by preparing five valuable API impurities including a multi-gram-scale synthesis of ketorolac impurity B for the first time. This journal is
- Gangadurai, Chinnakuzhanthai,Illa, Giri Teja,Reddy, D. Srinivasa
-
p. 8459 - 8466
(2020/11/05)
-
- Oxidation of alcohols using an oxoammonium salt bearing the nitrate anion
-
A methodology for the oxidation of alcohols to the corresponding carbonyl compounds is reported using a sub-stoichiometric quantity of an oxoammonium salt bearing the nitrate counterion. The approach proves successful for the oxidation of a range of alcohol substrates including those bearing an oxygen atom β to the site of oxidation or an α-trifluoromethyl moiety. The mechanism of the reaction has been probed and also gives an insight into the previously reported nitric acid mediated oxidation of alcohols.
- Miller, Shelli A.,Sandoval, Arturo León,Leadbeater, Nicholas E.
-
supporting information
(2019/12/25)
-
- Ag nanoparticle immobilized on functionalized magnetic hydrotalcite (Fe3O4/HT-SH-Ag) for clean oxidation of alcohols with TBHP
-
Hydrotalcite (HT) modified with magnetic nanoparticle and thiol groups for the immobilization of silver to the preparation of Fe3O4/HT-SH-Ag was used. The catalyst was completely characterized using XRD, ICP, SEM, EDS, VSM, FT-IR, and TEM analyzes. The Fe3O4/HT-SH-Ag catalyst is useful in oxidizing of primary and secondary aliphatic and benzyl alcohols to the relevant carbonyl products (aldehyde/ketone). To demonstrate the effect of Ag over the reaction, Fe3O4/HT-SH catalyst performance, and also some other control tests were studied. For this purpose, the model reaction was carried out in the presence of AgNO3, HT (I), and Fe3O4/HT (II), and low yield was obtained (20–50%). High to good efficiency were obtained for all entries, whether benzaldehyde derivatives, in short times. The catalyst can be reused for several continuous runs with a simple external magnet without losing significant reactivity.
- Salimi, Mehri,Zamanpour, Azadeh
-
-
- Simple synthesis of the novel Cu-MOF catalysts for the selective alcohol oxidation and the oxidative cross-coupling of amines and alcohols
-
A novel porous metal–organic framework {Cu2(bbda)0.5(Hbbda)1.5(OAc)1.5.8H2O} (UoB-5) was synthesized under ultrasound irradiation by employing a new Schiff base ligand H2bbda (4,4'(1,4-phenylene bis (azanylylidene)) bis (methanylylidene))dibenzoic acid) and was fully characterized. The microporous nature of UoB-5 was confirmed by gas-sorption measurements. This framework acted as a highly effective heterogeneous catalyst for the alcohol oxidation reaction with tert-butyl hydroperoxide (t-BuOOH) as an oxidant. The presence of coordinatively unsaturated metal sites in UoB-5 could be the reason for high performance in this reaction. Furthermore, using the long linker with the free -NC group and uncoordinated -N atom on the wall of the pores created UoB-5 an excellent candidate for the catalytic activities without activation of the framework. It was confirmed with the heterogeneous catalytic experiments on the one-pot tandem synthesis of imines from benzyl alcohols and anilines. Eventually, the new Cu-MOF (UoB-5) could be an alternative catalyst as a more economically favorable and environmentally friendly in the catalysis field.
- Ghamari Kargar, Pouya,Aryanejad, Sima,Bagherzade, Ghodsieh
-
-
- Green synthesis and characterization of novel Mn-MOFs with catalytic and antibacterial potentials
-
This study focused on the synthesis of a new manganese-based metal-organic framework and the investigation of its application aspects. A Mn-MOF nanostructure, namely UoB-4, was prepared using a Schiff base organic linker (H2bbda: 4,4′-[benzene-
- Aryanejad, Sima,Bagherzade, Ghodsieh,Moudi, Maryam
-
p. 1508 - 1516
(2020/02/06)
-
- A transition metal free expedient approach for the C[dbnd]C bond cleavage of arylidene Meldrum's acid and malononitrile derivatives
-
A transition metal free expedient approach for the C[dbnd]C bond cleavage of electron deficient alkenes such as arylidene Meldrum's acid and malononitrile derivatives are discussed. The C[dbnd]C bond of these compound were cleaved to benzoic acid in good yield at high temperature. Most importantly, with oxone in CH3CN/H2O at 45 °C or m-CPBA in DCM or NaClO2 in THF/H2O or PIDA in THF at room temperature furnished benzaldehyde derivatives selectively in excellent yields.
- Suresh, Muthiah,Kumari, Anusueya,Singh, Raj Bahadur
-
-
- Iron-catalyzed oxidative C-C(vinyl) σ-bond cleavage of allylarenes to aryl aldehydes at room temperature with ambient air
-
A general and selective iron-catalyzed allylic C-C(vinyl) σ-bond cleavage of allylarenes without the assistance of heteroatoms to give aryl aldehydes is reported. The unstrained carbon-carbon single bond cleavage reaction uses ambient air as the sole oxidant, proceeds efficiently at room temperature, and allows for exceptional functional-group tolerance, which addresses the long-standing challenges of current C-C bond cleavage/functionalization. Notably, the method enables rapid late-stage oxidation of complex bioactive molecules and can be used to expedite syntheses of natural products (vanillin and glucovanillin) from readily available chemical feedstocks.
- Liu, Binbin,Cheng, Lu,Hu, Penghui,Xu, Fangning,Li, Dan,Gu, Wei-Jin,Han, Wei
-
p. 4817 - 4820
(2019/05/02)
-
- Selective Functionalization of Styrenes with Oxygen Using Different Electrode Materials: Olefin Cleavage and Synthesis of Tetrahydrofuran Derivatives
-
Electrode materials can have a significant impact on the course of an electrolysis reaction. Of particular interest is that different electrodes can generate different products from the same substrate. The electrode-material-selective transformations of styrene derivatives with molecular oxygen are reported. Platinum electrodes afford carbonyl products via cleavage of olefins, whereas tetrahydrofuran formation is achieved with carbon electrodes. A variety of different styrenes are available for both reactions. Electrolysis allows straightforward and mild chemical conversions that are metal- and oxidant-free. Electrochemical measurements illuminate the different effects of platinum and carbon electrodes on styrenes. The key to the differing reactions is probably that the oxidation potentials of the substrates are lower (higher HOMO energy) on carbon electrodes than on platinum electrodes. The adsorption of the substrates on carbon electrodes can also promote tetrahydrofuran formation.
- Imada, Yasushi,Okada, Yohei,Noguchi, Keiichi,Chiba, Kazuhiro
-
supporting information
p. 125 - 129
(2018/12/05)
-
- Random Mutagenesis-Driven Improvement of Carboxylate Reductase Activity using an Amino Benzamidoxime-Mediated High-Throughput Assay
-
Carboxylic acid reductases (CARs) catalyze the direct adenosine triphosphate (ATP) and nicotinamide adenine dinucleotide phosphate (NADPH) dependent reduction of carboxylic acids to their corresponding aldehydes. The identification and improvement of CARs by protein engineering is, however, severely limited by the lack of fast and generic methods to quantify aldehydes. Within this study, we applied a convenient high-throughput assay (HTA) based on amino benzamidoxime (ABAO) that allows the substrate-independent and chemoselective quantification of aldehydes. Random mutagenesis of the well-known CAR from Nocardia iowensis (CARNi) to improve its activity for sterically demanding 2-substituted benzoic acid derivatives was conducted in a KM-dependent fashion, and the HTA applied in the presence of microbial cells. The study identified a hot spot in the active site of CARNi that increased the affinity to 2-methoxybenzoic acid 9-fold upon mutation from glutamine to proline (Q283P). The catalytic performance of CARNiQ283P appeared to be significantly improved also for other substrates such as 2-substituted (2-Cl, 2-Br) as well as 3- and 4-substituted benzoic acids (3-OMe, 4-OMe), and even aliphatic octanoic acid. (Figure presented.).
- Schwendenwein, Daniel,Ressmann, Anna K.,Doerr, Mark,H?hne, Matthias,Bornscheuer, Uwe T.,Mihovilovic, Marko D.,Rudroff, Florian,Winkler, Margit
-
supporting information
p. 2544 - 2549
(2019/04/26)
-
- Facile Synthesis of BiVO4 for Visible-Light-Induced C?C Bond Cleavage of Alkenes to Generate Carbonyls
-
BiVO4 crystals synthesized by an ultrasonic-assisted method (Sono-BiVO4) showed improved efficiency as a heterogeneous photocatalyst under visible-light irradiation. Sono-BiVO4 was successfully used for the C?C bond cleavage of alkenes to generate carbonyl compounds. Styrene derivatives were converted into carbonyl compounds in the presence of Sono-BiVO4 under highly sustainable conditions requiring only natural sources, that is, molecular oxygen, visible light, and water at room temperature. Additionally, Sono-BiVO4 could be easily separated from the reaction mixture and reused.
- Han, Sung Su,Park, Joon Yong,Hwang, Ho Seong,Choe, Hye Rin,Nam, Ki Min,Cho, Eun Jin
-
p. 3018 - 3022
(2019/05/16)
-
- Copper Nanoparticles Immobilized on Nanocellulose: A Novel and Efficient Heterogeneous Catalyst for Controlled and Selective Oxidation of Sulfides and Alcohols
-
In this work, we have described the versatility of low metal loading copper nanoparticles immobilized on nanocellulose for the controlled and selective oxidation of sulfides to sulfoxides and primary alcohols to aldehydes using green oxidant at room temperature. Aromatic, aliphatic and heterocyclic sulfides were oxidized to their corresponding sulfoxides with high yields without formation of over oxidized sulfones. Similarly, benzylic, allylic and aliphatic alcohols were selectively oxidized to aldehydes without traces of carboxylic acids in good to excellent yields.
- Dutta, Apurba,Chetia, Mitali,Ali, Abdul A.,Bordoloi, Ankur,Gehlot, Praveen S.,Kumar, Arvind,Sarma, Diganta
-
p. 141 - 150
(2018/12/13)
-
- A Simple, Mild and General Oxidation of Alcohols to Aldehydes or Ketones by SO2F2/K2CO3 Using DMSO as Solvent and Oxidant
-
A practical, general and mild oxidation of primary and secondary alcohols to carbonyl compounds proceeds in yields of up to 99% using SO2F2 as electrophile in DMSO as both the oxidant and the solvent at ambient temperature. No moisture- and oxygen-free conditions are required. Stoichiometric amount of inexpensive K2CO3, which generates easy to separate by-products, is used as the base. Thus, 5-gram scale runs proceeded in nearly quantitative yields by a simple filtration as the work-up. The use of a polar solvent such as DMSO, which usually promotes competing Pummerer rearrangement, is also noteworthy. This protocol is compatible with a variety of common N-, O-, and S-functional groups on (hetero)arene, alkene and alkyne substrates (68 examples). The protocol was applied (99% yield) to a formal synthesis of the important cholesterol-lowering drug Rosuvastatin. (Figure presented.).
- Zha, Gao-Feng,Fang, Wan-Yin,Leng, Jing,Qin, Hua-Li
-
supporting information
p. 2262 - 2267
(2019/04/17)
-
- Catalytic Oxidation of Alcohols Using a 2,2,6,6-Tetramethylpiperidine-N-hydroxyammonium Cation
-
The oxidation of alcohols to aldehydes, ketones, and carboxylic acids is reported using 2,2,6,6-tetramethylpiperidine-4-acetamido-hydroxyammonium tetrafluoroborate as a catalyst in conjunction with sodium hypochlorite pentahydrate as a terminal oxidant. The reaction is generally complete within 30–120 min using an acetonitrile/water mix as the solvent, and no additives are required. Product yields are good to excellent and of particular note is that the methodology can be used to access aryl α-trifluoromethyl ketones.
- Miller, Shelli A.,Bisset, Kathryn A.,Leadbeater, Nicholas E.,Eddy, Nicholas A.
-
supporting information
p. 1413 - 1417
(2019/01/04)
-
- Design and development of novel Co-MOF nanostructures as an excellent catalyst for alcohol oxidation and Henry reaction, with a potential antibacterial activity
-
The novel metal–organic framework Co2(bdda)1.5(OAc)1·5H2O (UoB-3) was synthesized via a simple method at room temperature. UoB-3 was characterized by the different methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), N2-adsorption/desorption and elemental analysis. The catalytic ability of UoB-3 was detected to be excellent for primary and secondary alcohols oxidation reaction with high yields under solvent-free conditions. Moreover, UoB-3 was highly active for Henry reaction of different aldehydes with nitromethane in water as a green solvent. The nanocatalyst can be recycled for five consecutive cycles without losing its activity and structural rigidity. The antibacterial activity of UoB-3 nanostructures towards Gram-negative bacteria, Escherichia coli and Gram-positive bacteria, Bacillus cereus was also evaluated by using an inhibition zone test. These nanostructures exhibited strong antibacterial effect against both of them. The purpose of this study was the developing metal–organic framework materials with the enhanced activity in various fields.
- Aryanejad, Sima,Bagherzade, Ghodsieh,Moudi, Maryam
-
-
- A molybdenum based metallomicellar catalyst for controlled and chemoselective oxidation of activated alcohols in aqueous medium
-
A surfactant based oxodiperoxo molybdenum complex, which could activate molecular oxygen, has been employed as a catalyst for controlled oxidation of benzylic alcohols to corresponding carbonyls. The oxidation reactions were carried out under aqueous environment, however, in the absence of any extraneous base or co-catalyst. Sensitive/oxidizable functional groups like cyano, sulfide, hydroxyl, aryl-hydroxyl, alkene (internal/terminal), alkyne (internal/terminal), and acetal were tolerated during the transformations. Such selectivity is attributed to the mild nature of the catalyst. The methodology could also be scaled-up for multi-gram synthesis and the protocol is likely to find practical use since it requires an inexpensive recyclable-catalyst and easily available oxidant (under green conditions). A plausible mechanism is proposed with the help of preliminary computational study.
- Thiruvengetam, Prabaharan,Chakravarthy, Rajan Deepan,Chand, Dillip Kumar
-
p. 123 - 133
(2019/07/19)
-
- Highly efficient and practical aerobic oxidation of alcohols by inorganic-ligand supported copper catalysis
-
The oxidation of alcohols to aldehydes or ketones is a highly relevant conversion for the pharmaceutical and fine-chemical industries, and for biomass conversion, and is commonly performed using stoichiometric amounts of highly hazardous oxidants. The aerobic oxidation of alcohols with transition metal complex catalysts previously required complicated organic ligands and/or nitroxyl radicals as co-catalysts. Herein, we report an efficient and eco-friendly method to promote the aerobic oxidation of alcohols using an inorganic-ligand supported copper catalyst 1, (NH4)4[CuMo6O18(OH)6], with O2 (1 atm) as the sole oxidant. Catalyst 1 is synthesized directly from cheap and commonly available (NH4)6Mo7O24·4H2O and CuSO4, which consists of a pure inorganic framework built from a central CuII core supported by six MoVIO6 inorganic scaffolds. The copper catalyst 1 exhibits excellent selectivity and activity towards a wide range of substrates in the catalytic oxidation of alcohols, and can avoid the use of toxic oxidants, nitroxyl radicals, and potentially air/moisture sensitive and complicated organic ligands that are not commercially available. Owing to its robust inorganic framework, catalyst 1 shows good stability and reusability, and the catalytic oxidation of alcohols with catalyst 1 could be readily scaled up to gram scale with little loss of catalytic activity, demonstrating great potential of the inorganic-ligand supported Cu catalysts in catalytic chemical transformations.
- Wei, Zheyu,Ru, Shi,Zhao, Qixin,Yu, Han,Zhang, Gang,Wei, Yongge
-
supporting information
p. 4069 - 4075
(2019/08/07)
-
- Switchable Bifunctional Bistate Reusable ZnO-Cu for Selective Oxidation and Reduction Reaction
-
Herein we disclosed the utilization of copper loaded zinc oxide (ZnO-Cu) for its stimuli (O2/light) responsive switchable performance between its reduced (S-1) and oxidized (S-2) state for two antagonistic reactions, namely oxidation of alkyl arenes/heteroarenes to aldehydes/ketones and reduction of nitro arenes/heteroarenes to corresponding amines. The two states of the catalyst showed its switchable performance as highly active and poorly active catalyst for oxidation and reduction, and both reactions could be turned "off" and "on" by changing the stimuli (light and O2/N2). The switching efficiency between the states and their relative reactivity were found to be consistent under variety of reaction conditions and remain unaltered irrespective of oxidation-reduction (or vice versa) sequence and substrates used in the reaction. The photo catalysts (S-1 and S-2) demonstrated good catalytic activity, multiple reusability, broad substrate scope, and reasonable functional group tolerance for both the reactions and probed its quality performance in a large-scale setup. The system was used in an assisted tandem catalysis setup for the synthesis of benzyl amines utilizing both oxidation and reduction reaction by stimuli responsive switching between the states of the catalyst.
- Sarmah, Kasturi,Mukhopadhyay, Subhamoy,Maji, Tarun K.,Pratihar, Sanjay
-
p. 732 - 745
(2019/01/11)
-
- Visible-Light-Mediated α-Oxygenation of 3-(N,N-Dimethylaminomethyl)-Indoles to Aldehydes
-
The visible-light-mediated oxygenation of 3-N,N-(dimethylaminomethyl)-indoles bearing various substituents afforded a series of 3-carbaindole derivatives. Herein we describe the reaction scope, a plausible mechanism and a practical application of this transformation in the formal synthesis of (–)-vincorine is described as well.
- Stanek, Filip,Paw?owski, Robert,Mlynarski, Jacek,Stodulski, Maciej
-
supporting information
p. 6624 - 6628
(2018/10/20)
-