Welcome to LookChem.com Sign In|Join Free

CAS

  • or

100-20-9

Post Buying Request

100-20-9 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

100-20-9 Usage

Chemical Properties

monoclinic crystals or white crystalline flakes. Soluble in ethanol and organic solvents.

Uses

Different sources of media describe the Uses of 100-20-9 differently. You can refer to the following data:
1. Terephthaloyl chloride and Isophthaloyl dichloride have many similar uses as monomers for the synthesis of specialty fibers and as raw materials for polymers such as polyamides and polyesters. Dyemanufacture; synthetic fibers, resins, films; UV absorption; pharmaceuticals; rubber chemicals; cross-linking agent for polyurethanes and polysulfides.
2. Terephthaloyl chloride acts as a monomer with p-phenylenediamine used in the preparation of polymer viz. poly paraphenylene terephthalamide. It is an active component in performance polymers and aramid fibers, which gives flame resistance, chemical resistance, temperature stability, light weight, and very high strength. It is also used as an effective water scavenger, utilized to stabilize isocyanates and urethane prepolymers. Further, it is used in the preparation of liquid crystalline thermosets by thermal cyclotrimerization of dicyanate compounds of ring substituted bis(4-hydroxyphenyl) terepthalates. In addition to this, it is involved in the condensation reaction with difunctional alfa, μ-diaminopolystyrene to get chain-extended polystyrene containing amide bonds along the polymer backbone.

Preparation

Synthesis of terephthaloyl chloride by thionyl chloride method: terephthalic acid is mixed with thionyl chloride, refluxed at 80℃ for 10-12h, then the thionyl chloride is evaporated, and the resulting crude product is distilled under reduced pressure to obtain the finished product.

General Description

Terephthaloyl chloride undergoes condensation reaction with difunctional α,ω-diaminopolystyrene to yield chain-extended polystyrene containing amide bonds along the polymer backbone. It undergoes interfacial reaction with bovine serum albumin to form thin cross-linked films.

Hazard

Skin irritant.

Flammability and Explosibility

Nonflammable

Safety Profile

Moderately toxic by ingestion. Corrosive. Combustible when exposed to heat or flame. When heated to decomposition it emits toxic fumes of Cl-. See also CHLORIDES.

Purification Methods

Crystallise the acid chloride from dry hexane. [Beilstein 9 IV 3318.]

Check Digit Verification of cas no

The CAS Registry Mumber 100-20-9 includes 6 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 3 digits, 1,0 and 0 respectively; the second part has 2 digits, 2 and 0 respectively.
Calculate Digit Verification of CAS Registry Number 100-20:
(5*1)+(4*0)+(3*0)+(2*2)+(1*0)=9
9 % 10 = 9
So 100-20-9 is a valid CAS Registry Number.
InChI:InChI=1/C8H4Cl2O2/c9-7(11)5-1-2-6(4-3-5)8(10)12/h1-4H

100-20-9 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • Alfa Aesar

  • (A11224)  Terephthaloyl chloride, 99%   

  • 100-20-9

  • 250g

  • 327.0CNY

  • Detail
  • Alfa Aesar

  • (A11224)  Terephthaloyl chloride, 99%   

  • 100-20-9

  • 1000g

  • 833.0CNY

  • Detail
  • Aldrich

  • (120871)  Terephthaloylchloride  ≥99%, flakes

  • 100-20-9

  • 120871-5G

  • 288.99CNY

  • Detail
  • Aldrich

  • (120871)  Terephthaloylchloride  ≥99%, flakes

  • 100-20-9

  • 120871-250G

  • 486.72CNY

  • Detail
  • Aldrich

  • (120871)  Terephthaloylchloride  ≥99%, flakes

  • 100-20-9

  • 120871-1KG

  • 1,310.40CNY

  • Detail

100-20-9SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 10, 2017

Revision Date: Aug 10, 2017

1.Identification

1.1 GHS Product identifier

Product name Terephthaloyl Chloride

1.2 Other means of identification

Product number -
Other names Terephthaloyl Dichloride

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Intermediates
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:100-20-9 SDS

100-20-9Synthetic route

terephthalic acid
100-21-0

terephthalic acid

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With thionyl chloride for 2h; Reflux;100%
With aluminum (III) chloride; Methyltrichlorosilane In tetrachloromethane at 70℃; for 13h; Temperature; Reagent/catalyst;99.13%
With thionyl chloride for 5h; Reflux;98%
phosgene
75-44-5

phosgene

terephthalic acid
100-21-0

terephthalic acid

N,N-dimethyl-aniline
121-69-7

N,N-dimethyl-aniline

A

1,4-benzenedicarboxylic acid dimethyl ester
120-61-6

1,4-benzenedicarboxylic acid dimethyl ester

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
In dichloromethaneA n/a
B 90.2%
carbon monoxide
201230-82-2

carbon monoxide

4-iodobenzoic acid chloride
1711-02-0

4-iodobenzoic acid chloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With bis(tri-t-butylphosphine)palladium(0); benzyltriphenylphosphonium chloride In toluene at 110℃; under 38002.6 Torr; for 48h; Glovebox; Autoclave; Inert atmosphere;88%
para-xylene
106-42-3

para-xylene

A

4-methyl-benzoyl chloride
874-60-2

4-methyl-benzoyl chloride

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
Stage #1: para-xylene With 5,10,15,20-tetrakis(4-methylphenyl)porphyrinatocopper(II); C40H32MnN8; oxygen at 180℃; under 2 Torr;
Stage #2: With thionyl chloride Reagent/catalyst; Temperature; Pressure;
A 59.4%
B 9.3%
Stage #1: para-xylene With 5,10,15,20-tetrakis(4-methylphenyl)porphyrinatocopper(II); C36H24MnN8; oxygen; cobalt(II) diacetate tetrahydrate at 180℃; under 15001.5 Torr;
Stage #2: With thionyl chloride Reagent/catalyst; Temperature; Pressure;
A 27.1%
B 37.1%
maleic anhydride
108-31-6

maleic anhydride

1,4-bis(trichloromethyl)benzene
68-36-0

1,4-bis(trichloromethyl)benzene

(E)-3-Ureido-but-2-enoic acid ethyl ester
5435-44-9, 22243-66-9

(E)-3-Ureido-but-2-enoic acid ethyl ester

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
at 140℃;
1,4-benzenedicarboxylic acid dimethyl ester
120-61-6

1,4-benzenedicarboxylic acid dimethyl ester

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With chlorine at 220℃;
With chlorine In benzene for 12h; Solvent; UV-irradiation;
1,4-bis(trichloromethyl)benzene
68-36-0

1,4-bis(trichloromethyl)benzene

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With titanium(IV) oxide
With maleic acid; zinc(II) chloride
With water; iron(III) chloride at 125 - 140℃;
With aluminium trichloride; water at 125 - 140℃;
at 125℃; for 1h; Temperature;
4-trichloromethylbenzoyl chloride
14815-86-2

4-trichloromethylbenzoyl chloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With water; iron(III) chloride at 120 - 130℃;
p-Toluic acid
99-94-5

p-Toluic acid

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With tetrachloromethane; chlorine at 250℃;
terephthalic acid
100-21-0

terephthalic acid

Benzotrichlorid
98-07-7

Benzotrichlorid

terephthaloyl chloride
100-20-9

terephthaloyl chloride

terephthalic acid
100-21-0

terephthalic acid

acetyl chloride
75-36-5

acetyl chloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
at 130℃;
terephthalic acid
100-21-0

terephthalic acid

acetyl chloride
75-36-5

acetyl chloride

A

terephthaloyl chloride
18708-46-8

terephthaloyl chloride

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
at 130℃;
at 130℃;
terephthalic acid
100-21-0

terephthalic acid

1,4-bis(trichloromethyl)benzene
68-36-0

1,4-bis(trichloromethyl)benzene

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
iron(III) chloride In chlorobenzene at 115℃; Rate constant; Kinetics; Mechanism; activation energy, reaction order;
terephthaloyl chloride
18708-46-8

terephthaloyl chloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With thionyl chloride; N,N-dimethyl-formamide at 40℃; Kinetics; Thermodynamic data; 50, 60 deg C, E(excit.), lg A, -ΔS(excit.) at 313 K;
p-phenylenebis(chlorodiazirine)

p-phenylenebis(chlorodiazirine)

A

1,4-bis-chlorocarbonyloxy-benzene
1885-20-7

1,4-bis-chlorocarbonyloxy-benzene

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With oxygen In solid matrix at -263.2℃; Irradiation; var. conc. of O2;
ethanol
64-17-5

ethanol

terephthalic acid
100-21-0

terephthalic acid

A

diethyl-4,4-(1,3,4-oxadiazole-2,5-diyl)dibenzoate
109865-79-4

diethyl-4,4-(1,3,4-oxadiazole-2,5-diyl)dibenzoate

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
Yield given. Multistep reaction;A n/a
B 4.0 g
terephthalic acid bis(trimethylsilyl) ester
4147-84-6

terephthalic acid bis(trimethylsilyl) ester

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With oxalyl dichloride; N,N-dimethyl-formamide In dichloromethane 1.) 0 deg C, 1 h, 2.) RT, 1 h;
terephthalic acid
100-21-0

terephthalic acid

2.4-dichloro-trichloromethyl-benzene

2.4-dichloro-trichloromethyl-benzene

terephthaloyl chloride
100-20-9

terephthaloyl chloride

terephthalic acid
100-21-0

terephthalic acid

phosphorus pentachloride
10026-13-8, 874483-75-7

phosphorus pentachloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

terephthalic acid
100-21-0

terephthalic acid

2-chloro-1,3-dimethylimidazolinium chloride
37091-73-9

2-chloro-1,3-dimethylimidazolinium chloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
In toluene
1,4-benzenedicarboxylic acid dimethyl ester
120-61-6

1,4-benzenedicarboxylic acid dimethyl ester

methyl terephthalate chloride

methyl terephthalate chloride

Triphenylphosphine oxide
791-28-6

Triphenylphosphine oxide

terephthaloyl chloride
100-20-9

terephthaloyl chloride

phosgene
75-44-5

phosgene

terephthalic acid
100-21-0

terephthalic acid

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With pyridine In dichloromethane
1,4-benzenedicarboxylic acid dimethyl ester
120-61-6

1,4-benzenedicarboxylic acid dimethyl ester

1,4-bis(trichloromethyl)benzene
68-36-0

1,4-bis(trichloromethyl)benzene

benzamide
55-21-0

benzamide

terephthaloyl chloride
100-20-9

terephthaloyl chloride

terephthalaldehyde,
623-27-8

terephthalaldehyde,

A

4-formylbenzoyl chloride
16173-52-7

4-formylbenzoyl chloride

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With chlorine at 90℃; for 3.16667h; Product distribution / selectivity;
terephthalaldehyde,
623-27-8

terephthalaldehyde,

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With chlorine at 90℃; for 3.45h; Product distribution / selectivity; visible light irradiation;
Isophthalaldehyde
626-19-7

Isophthalaldehyde

terephthalaldehyde,
623-27-8

terephthalaldehyde,

A

terephthaloyl chloride
100-20-9

terephthaloyl chloride

B

benzene-1,3-dicarbonyl dichloride
99-63-8

benzene-1,3-dicarbonyl dichloride

Conditions
ConditionsYield
With chlorine at 43℃; for 0.5h; Product distribution / selectivity; visible light irradiation;
disodium terephthalate
10028-70-3

disodium terephthalate

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With thionyl chloride for 0.0833333h;
4-iodobenzoic acid chloride
1711-02-0

4-iodobenzoic acid chloride

A

para-diiodobenzene
624-38-4

para-diiodobenzene

B

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Conditions
ConditionsYield
With tris-(dibenzylideneacetone)dipalladium(0); 4,5-bis(diphenylphos4,5-bis(diphenylphosphino)-9,9-dimethylxanthenephino)-9,9-dimethylxanthene In toluene at 100℃; for 12h; Mechanism;A 11 %Chromat.
B 7 %Chromat.
terephthaloyl chloride
100-20-9

terephthaloyl chloride

benzylamine
100-46-9

benzylamine

N1,N4-dibenzylterephthalamide
15771-25-2

N1,N4-dibenzylterephthalamide

Conditions
ConditionsYield
With triethylamine In dichloromethane100%
(2S,3S,4S,5S)-4-(tert-butyldimethylsiloxy)-2,5-bis[(tert-butyldimethylsiloxy)methyl]-6,6-dimethyltetrahydro-2H-pyran-3-amine

(2S,3S,4S,5S)-4-(tert-butyldimethylsiloxy)-2,5-bis[(tert-butyldimethylsiloxy)methyl]-6,6-dimethyltetrahydro-2H-pyran-3-amine

terephthaloyl chloride
100-20-9

terephthaloyl chloride

C62H124N2O10Si6

C62H124N2O10Si6

Conditions
ConditionsYield
With dmap; triethylamine In dichloromethane at 0 - 20℃; for 21h; Schotten-Baumann Reaction; Inert atmosphere;100%
anthranilic acid
118-92-3

anthranilic acid

terephthaloyl chloride
100-20-9

terephthaloyl chloride

cyassorb 3638
18600-59-4

cyassorb 3638

Conditions
ConditionsYield
Stage #1: anthranilic acid; terephthaloyl chloride In N,N-dimethyl acetamide at 0 - 5℃; for 1h; Cooling with ice-methanol;
Stage #2: With acetic anhydride In N,N-dimethyl acetamide; toluene for 1.5h; Product distribution / selectivity; Heating / reflux;
99%
Stage #1: anthranilic acid; terephthaloyl chloride In 1-methyl-pyrrolidin-2-one at 3 - 8℃; for 2h; Cooling with ice;
Stage #2: With acetic anhydride In 1-methyl-pyrrolidin-2-one at 108 - 116℃; for 2h; Product distribution / selectivity;
96%
Stage #1: anthranilic acid; terephthaloyl chloride In sulfolane at 6 - 8℃; for 2h; Cooling with ice;
Stage #2: With acetic anhydride In 1,4-dioxane; sulfolane for 2h; Product distribution / selectivity; Heating / reflux;
96%
In pyridine
2-isopropenylaniline
52562-19-3

2-isopropenylaniline

terephthaloyl chloride
100-20-9

terephthaloyl chloride

N,N'-Bis-(2-isopropenyl-phenyl)-terephthalamide
148336-18-9

N,N'-Bis-(2-isopropenyl-phenyl)-terephthalamide

Conditions
ConditionsYield
With pyridine at 0℃; for 2h;99%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

10-(4,5-dimethyl-1,3-dithiol-2-ylidene)-9,10-dihydro-9-(4-hydroxymethyl-5-methyl-1,3-dithiol-2-ylidene)anthracene
336196-13-5

10-(4,5-dimethyl-1,3-dithiol-2-ylidene)-9,10-dihydro-9-(4-hydroxymethyl-5-methyl-1,3-dithiol-2-ylidene)anthracene

terephthalic acid bis-{2-[10-(4,5-dimethyl-[1,3]dithiol-2-ylidene)-10H-anthracen-9-ylidene]-5-methyl-[1,3]dithiol-4-ylmethyl} ester

terephthalic acid bis-{2-[10-(4,5-dimethyl-[1,3]dithiol-2-ylidene)-10H-anthracen-9-ylidene]-5-methyl-[1,3]dithiol-4-ylmethyl} ester

Conditions
ConditionsYield
With triethylamine In dichloromethane at 20℃;99%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

4-hydroxymethyldibenzo-24-crown-8 ether
221002-03-5

4-hydroxymethyldibenzo-24-crown-8 ether

terephthalic acid bis-(2,5,8,11,18,21,24,27-octaoxa-tricyclo[26.4.0.012,17]dotriaconta-1(32),12,14,16,28,30-hexaen-14-ylmethyl) ester

terephthalic acid bis-(2,5,8,11,18,21,24,27-octaoxa-tricyclo[26.4.0.012,17]dotriaconta-1(32),12,14,16,28,30-hexaen-14-ylmethyl) ester

Conditions
ConditionsYield
With dmap; triethylamine In dichloromethane at 20℃; for 0.25h;99%
1-(1,1,2,2,3,3,4,4,4-nonafluorobutylsulfonyl)piperazine

1-(1,1,2,2,3,3,4,4,4-nonafluorobutylsulfonyl)piperazine

terephthaloyl chloride
100-20-9

terephthaloyl chloride

[4-[4-(1,1,2,2,3,3,4,4,4-nonafluorobutylsulfonyl)piperazine-1-carbonyl]phenyl]-[4-(1,1,2,2,3,3,4,4,4-nonafluorobutylsulfonyl)piperazin-1-yl]methanone

[4-[4-(1,1,2,2,3,3,4,4,4-nonafluorobutylsulfonyl)piperazine-1-carbonyl]phenyl]-[4-(1,1,2,2,3,3,4,4,4-nonafluorobutylsulfonyl)piperazin-1-yl]methanone

Conditions
ConditionsYield
With triethylamine In dichloromethane at 20℃; for 16h; Inert atmosphere;99%
N-(tert-butoxycarbonyl)-1,4-phenylenediamine
71026-66-9

N-(tert-butoxycarbonyl)-1,4-phenylenediamine

terephthaloyl chloride
100-20-9

terephthaloyl chloride

di-tert-butyl ((terephthaloylbis(azanediyl))bis(4,1-phenylene))dicarbamate

di-tert-butyl ((terephthaloylbis(azanediyl))bis(4,1-phenylene))dicarbamate

Conditions
ConditionsYield
With triethylamine In dichloromethane at 20℃; for 15h;99%
L-valine methylester hydrochloride
6306-52-1

L-valine methylester hydrochloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

C20H28N2O6

C20H28N2O6

Conditions
ConditionsYield
With triethylamine In dichloromethane at 0 - 20℃; Inert atmosphere;98.5%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

terephthalaldehyde,
623-27-8

terephthalaldehyde,

Conditions
ConditionsYield
With sodium tris(tert-butoxo)aluminium hydride In tetrahydrofuran; diethylene glycol dimethyl ether at -78℃; for 3h;98%
With tri-n-butyl-tin hydride; tetrakis(triphenylphosphine) palladium(0) In benzene for 0.166667h; Ambient temperature;87%
With tri-n-butyl-tin hydride In 1-methyl-pyrrolidin-2-one at 20℃; Inert atmosphere;86%
methyl thiocyanate
556-64-9

methyl thiocyanate

terephthaloyl chloride
100-20-9

terephthaloyl chloride

2,2'-(1,4-Phenylen)bis<4,6-bis(methylthio)-1,3,5-oxadiazinium>-dihexachloroantimonat(V)
125077-76-1

2,2'-(1,4-Phenylen)bis<4,6-bis(methylthio)-1,3,5-oxadiazinium>-dihexachloroantimonat(V)

Conditions
ConditionsYield
With antimonypentachloride In tetrachloromethane for 2h; Ambient temperature;98%
sebacoyl chloride
111-19-3

sebacoyl chloride

2,5-dimethyl-2,5-dihydroperoxyhexane
3025-88-5

2,5-dimethyl-2,5-dihydroperoxyhexane

terephthaloyl chloride
100-20-9

terephthaloyl chloride

4-(4-{4-[4-(9-{4-[9-(4-Hydroperoxy-1,1,4-trimethyl-pentylperoxycarbonyl)-nonanoylperoxy]-1,1,4-trimethyl-pentylperoxycarbonyl}-nonanoylperoxy)-1,1,4-trimethyl-pentylperoxycarbonyl]-benzoylperoxy}-1,1,4-trimethyl-pentylperoxycarbonyl)-benzoic acid

4-(4-{4-[4-(9-{4-[9-(4-Hydroperoxy-1,1,4-trimethyl-pentylperoxycarbonyl)-nonanoylperoxy]-1,1,4-trimethyl-pentylperoxycarbonyl}-nonanoylperoxy)-1,1,4-trimethyl-pentylperoxycarbonyl]-benzoylperoxy}-1,1,4-trimethyl-pentylperoxycarbonyl)-benzoic acid

Conditions
ConditionsYield
With pyridine In dichloromethane at 20℃; for 1.5h;98%
N-methyl-hydrazinecarbodithioic acid methyl ester
20184-94-5

N-methyl-hydrazinecarbodithioic acid methyl ester

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Dimethyl 3,3'-terephthaloylbis-(2-methyldithiocarbazate)
134897-08-8

Dimethyl 3,3'-terephthaloylbis-(2-methyldithiocarbazate)

Conditions
ConditionsYield
In toluene for 4h; Heating;98%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

4-<<(S)-6-methyloctyl>oxy>phenol
114243-83-3

4-<<(S)-6-methyloctyl>oxy>phenol

4-<<(S)-6-methyloctyl>oxy>phenyl 4-(chloroformyl)benzoate
115607-32-4

4-<<(S)-6-methyloctyl>oxy>phenyl 4-(chloroformyl)benzoate

Conditions
ConditionsYield
With toluene Ambient temperature;98%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

1,1'-bi-2-naphthol
602-09-5

1,1'-bi-2-naphthol

Polymer, Mw 0.9E4; Monomer(s): terephthaloyl chloride; (R)-1,1\-bi-2-naphthol

Polymer, Mw 0.9E4; Monomer(s): terephthaloyl chloride; (R)-1,1\-bi-2-naphthol

Conditions
ConditionsYield
With triethylamine In tetrahydrofuran under 12 Torr; Heating;98%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

1,1'-bi-2-naphthol
602-09-5

1,1'-bi-2-naphthol

Polymer, Mw 1.0E4; Monomer(s): terephthaloyl chloride; (S)-1,1\-bi-2-naphthol

Polymer, Mw 1.0E4; Monomer(s): terephthaloyl chloride; (S)-1,1\-bi-2-naphthol

Conditions
ConditionsYield
With triethylamine In tetrahydrofuran under 12 Torr; Heating;98%
4,4'-bis(phenoxy)benzophenone
14984-21-5

4,4'-bis(phenoxy)benzophenone

terephthaloyl chloride
100-20-9

terephthaloyl chloride

trimellitic anhydride acid chloride
1204-28-0

trimellitic anhydride acid chloride

polymer, ratio of trimellitic anhydride acid chloride/(terephthaloyl chloride + trimellitic anhydride acid chloride) = 30 mol percent; monomer(s): 4,4\-diphenoxybenzophenone; terephthaloyl chloride; trimellitic anhydride acid chloride

polymer, ratio of trimellitic anhydride acid chloride/(terephthaloyl chloride + trimellitic anhydride acid chloride) = 30 mol percent; monomer(s): 4,4\-diphenoxybenzophenone; terephthaloyl chloride; trimellitic anhydride acid chloride

Conditions
ConditionsYield
With aluminium trichloride In 1,2-dichloro-ethane Friedel-Crafts copolycondensation;98%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

1-[(2-methyl-5-methylenehydroxy-3-thienyl)]-2-[(2-methyl-5-methylenehydroxy-3-thienyl)]perfluorocyclopentene
216864-70-9

1-[(2-methyl-5-methylenehydroxy-3-thienyl)]-2-[(2-methyl-5-methylenehydroxy-3-thienyl)]perfluorocyclopentene

Reaxys ID: 11385926

Reaxys ID: 11385926

Conditions
ConditionsYield
With pyridine In 1,1-dichloroethane at 40℃; for 2h;98%
2-Amino-5-methylbenzoic acid
2941-78-8

2-Amino-5-methylbenzoic acid

terephthaloyl chloride
100-20-9

terephthaloyl chloride

C24H16N2O4
163005-38-7

C24H16N2O4

Conditions
ConditionsYield
Stage #1: 2-Amino-5-methylbenzoic acid; terephthaloyl chloride In N,N-dimethyl acetamide at -3 - 4℃; for 2h; Cooling with ice-methanol;
Stage #2: With acetic anhydride In N,N-dimethyl acetamide; toluene for 1.5h; Product distribution / selectivity; Heating / reflux;
98%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

3-aminophenylboronic acid pinacolate
210907-84-9

3-aminophenylboronic acid pinacolate

N1,N4-bis(3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)terephthalamide

N1,N4-bis(3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)terephthalamide

Conditions
ConditionsYield
With triethylamine In dichloromethane at 4 - 20℃; for 18h;98%
isopropylamine
75-31-0

isopropylamine

terephthaloyl chloride
100-20-9

terephthaloyl chloride

N,N'-bis(isopropyl)-1,4-benzenedicarboxamide
15208-70-5

N,N'-bis(isopropyl)-1,4-benzenedicarboxamide

Conditions
ConditionsYield
With triethylamine In dichloromethane at 0 - 20℃; Inert atmosphere;98%
With triethylamine; lithium chloride In tetrahydrofuran at 0℃; for 12h; Inert atmosphere; Reflux;2.4 g
L-valine methyl ester
4070-48-8

L-valine methyl ester

terephthaloyl chloride
100-20-9

terephthaloyl chloride

dimethyl 2,2′-(terephthaloylbis(azanediyl))bis(3-methylbutanoate)

dimethyl 2,2′-(terephthaloylbis(azanediyl))bis(3-methylbutanoate)

Conditions
ConditionsYield
With triethylamine In dichloromethane at 0 - 20℃; Inert atmosphere;98%
D-Valine methyl ester hydrochloride
7146-15-8

D-Valine methyl ester hydrochloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

C20H28N2O6

C20H28N2O6

Conditions
ConditionsYield
With triethylamine In dichloromethane at 0 - 20℃; Inert atmosphere;97.5%
aniline
62-53-3

aniline

terephthaloyl chloride
100-20-9

terephthaloyl chloride

N,N'-diphenylterephthalamide
7154-31-6

N,N'-diphenylterephthalamide

Conditions
ConditionsYield
In tetrahydrofuran at 20℃; for 0.716667h;97%
With triethylamine In tetrahydrofuran at 20℃; for 18h;92%
With potassium carbonate In dichloromethane at 20℃; for 4h;73.2%
propan-1-ol
71-23-8

propan-1-ol

terephthaloyl chloride
100-20-9

terephthaloyl chloride

terephthalic acid dipropyl ester
1962-74-9

terephthalic acid dipropyl ester

Conditions
ConditionsYield
In toluene97%
methyl 4,6-O-benzylidene-α-D-allopyranoside
79549-74-9

methyl 4,6-O-benzylidene-α-D-allopyranoside

terephthaloyl chloride
100-20-9

terephthaloyl chloride

Terephthalic acid 1-((2S,4aS,6R,7S,8S,8aR)-8-hydroxy-6-methoxy-2-phenyl-hexahydro-pyrano[3,2-d][1,3]dioxin-7-yl) ester 4-((2R,4aR,6S,7R,8R,8aS)-8-hydroxy-6-methoxy-2-phenyl-hexahydro-pyrano[3,2-d][1,3]dioxin-7-yl) ester

Terephthalic acid 1-((2S,4aS,6R,7S,8S,8aR)-8-hydroxy-6-methoxy-2-phenyl-hexahydro-pyrano[3,2-d][1,3]dioxin-7-yl) ester 4-((2R,4aR,6S,7R,8R,8aS)-8-hydroxy-6-methoxy-2-phenyl-hexahydro-pyrano[3,2-d][1,3]dioxin-7-yl) ester

Conditions
ConditionsYield
With di(n-butyl)tin oxide; triethylamine In toluene at 22℃; for 0.33h;97%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

N-((R)-1-phenyl-ethyl)-N-propargylamine
808770-44-7

N-((R)-1-phenyl-ethyl)-N-propargylamine

N,N'-bis-(1-phenyl-ethyl)-N,N'-di-prop-2-ynyl-terephthalamide
808770-46-9

N,N'-bis-(1-phenyl-ethyl)-N,N'-di-prop-2-ynyl-terephthalamide

Conditions
ConditionsYield
With triethylamine In dichloromethane97%
terephthaloyl chloride
100-20-9

terephthaloyl chloride

5-chloroanthranilic acid
635-21-2

5-chloroanthranilic acid

C22H10Cl2N2O4
163005-37-6

C22H10Cl2N2O4

Conditions
ConditionsYield
Stage #1: terephthaloyl chloride; 5-chloroanthranilic acid In N,N-dimethyl acetamide at 4 - 11℃; for 4h; Cooling with ice;
Stage #2: With acetic anhydride In N,N-dimethyl acetamide at 105 - 126℃; for 2h;
97%
4,6-diaminoresorcin dihydrochloride
16523-31-2

4,6-diaminoresorcin dihydrochloride

terephthaloyl chloride
100-20-9

terephthaloyl chloride

2-(p-chloroformylphenyl)-5-amino-6-hydroxyl benzoxazole

2-(p-chloroformylphenyl)-5-amino-6-hydroxyl benzoxazole

Conditions
ConditionsYield
Stage #1: 4,6-diaminoresorcin dihydrochloride at 70℃; for 2h; Inert atmosphere; Ionic liquid;
Stage #2: terephthaloyl chloride at 110℃; for 12h; Time; Temperature; Inert atmosphere; Ionic liquid;
97%

100-20-9Relevant articles and documents

Incorporating Pendent Fullerenes with High Refractive Index Backbones: A Conjunction Effect Method for High Refractive Index Polymers

Chen, Shuang,Chen, Dongxue,Lu, Min,Zhang, Xin,Li, He,Zhang, Xiaoyan,Yang, Xiaoming,Li, Xiaohong,Tu, Yingfeng,Li, Christopher Y.

, p. 8480 - 8488 (2015)

To achieve high refractive index polymers (HRIPs), we report here the design and synthesis of four fullerene polyesters (P1-P4), based on the conjunction effect from the high refractive index polyester backbones and pendent fullerene side chains. At sodiu

-

Nakano et al.

, p. 808 (1977)

-

Exploiting Peptidomimetics to Synthesize Compounds That Activate Ryanodine Receptor Calcium Release Channels

Robinson, Ken,Easton, Christopher J.,Dulhunty, Angela F.,Casarotto, Marco G.

, p. 1957 - 1971 (2018)

Ryanodine receptor (RyR) Ca2+-release channels are essential for contraction in skeletal and cardiac muscle and are prime targets for modification of contraction in disorders that affect either the skeletal or heart musculature. We designed and synthesized a number of compounds with structures based on a naturally occurring peptide (A peptides) that modifies the activity of RyRs. In total, 34 compounds belonging to eight different classes were prepared. The compounds were screened for their ability to enhance Ca2+ release from isolated cardiac sarcoplasmic reticulum (SR) vesicles, with 25 displaying enhanced Ca2+ release. Competition studies with the parent peptides indicated that the synthetic compounds act at a competing site. The activity of the most effective of the compounds, BIT 180, was further explored using Ca2+ release from skeletal SR vesicles and contraction in intact skeletal muscle fibers. The compounds did not alter tension in intact fibers, indicating that (as expected) they are not membrane permeable, but importantly, that they are not toxic to the intact cells. Proof in principal that the compounds would be effective in intact muscle fibers if rendered membrane permeable was obtained with a structurally related membrane-permeable scorpion toxin (imperatoxin A), which was found to enhance contraction.

-

Rabjohn

, p. 5479,5481 (1954)

-

Effect of regioisomerism on the self-assembly and photophysical behavior of 1,3,4-thiadiazole-based polycatenars

Pathak, Suraj Kumar,Nath, Subrata,Gupta, Ravindra Kumar,Rao, D. S. Shankar,Prasad, S. Krishna,Achalkumar, Ammathnadu S.

, p. 8166 - 8182 (2015)

A new class of polycatenars, where the central benzene ring is connected to two arms derived from substituted 1,3,4-thiadiazoles at the 1,3- and 1,4-positions, was synthesized and characterized. These thiadiazole-based molecules are promising as they stabilize columnar phases over a wide temperature range, in comparison to their oxadiazole analogues. The para-substituted polycatenars exhibited a columnar hexagonal and/or a columnar oblique phase, while the meta-substituted polycatenars exhibited solely a columnar oblique phase. The para-substituted polycatenars exhibited green emission, while the meta-substituted polycatenars exhibited blue emission in solution and film states. Stabilization of a broad range columnar phase and luminescence in the solid state make these new compounds promising from the viewpoint of applications in emissive displays. The self-assembly and luminescence of these regioisomers was greatly influenced by the molecular structure.

Photo-on-Demand Synthesis of Vilsmeier Reagents with Chloroform and Their Applications to One-Pot Organic Syntheses

Liang, Fengying,Eda, Kazuo,Okazoe, Takashi,Wada, Akihiro,Mori, Nobuaki,Konishi, Katsuhiko,Tsuda, Akihiko

, p. 6504 - 6517 (2021)

The Vilsmeier reagent (VR), first reported a century ago, is a versatile reagent in a variety of organic reactions. It is used extensively in formylation reactions. However, the synthesis of VR generally requires highly toxic and corrosive reagents such as POCl3, SOCl2, or COCl2. In this study, we found that VR is readily obtained from a CHCl3 solution containing N,N-dimethylformamide or N,N-dimethylacetamide upon photo-irradiation under O2 bubbling. The corresponding Vilsmeier reagents were obtained in high yields with the generation of gaseous HCl and CO2 as byproducts to allow their isolations as crystalline solid products amenable to analysis by X-ray crystallography. With the advantage of using CHCl3, which bifunctionally serves as a reactant and a solvent, this photo-on-demand VR synthesis is available for one-pot syntheses of aldehydes, acid chlorides, formates, ketones, esters, and amides.

Synthesis and characteriation of novel poly (ester amide)s containing benzthiazole heterocyclic ring

Patel,Desai,Patel

, p. 203 - 208 (2004)

The novel Poly (ester-amide)s (PEAs) were prepared by inrter-facial polycondensation of 5 - hydroxy - 2 - amino benzthiazole with various di-basic acid chlorides. The PEAs were characterized by elements analysis, IR spectra studies, Mn estimated by non aqueous conductometric titration and thermogravimetry. The electric conductivity of all the poly (ester amide)s PEAs was also measured at room temperature and it was found that the PEAs have semiconducting properties.

Structure-activity relationships of analogues of NF449 confirm NF449 as the most potent and selective known P2X1 receptor antagonist

Kassack, Matthias U.,Braun, Kirsten,Ganso, Matthias,Ullmann, Heiko,Nickel, Peter,Boeing, Barbara,Mueller, Gregor,Lambrecht, Guenter

, p. 345 - 357 (2004)

NF449 [4,4′,4″,4′′′-(carbonylbis(imino-5,1,3- benzenetriyl-bis(carbonylimino)))tetrakisbenzene-1,3-disulfonic acid-octasodiumsalt)] was recently described to inhibit recombinant rP2X 1 receptors (Naunyn Schmiedeberg's Arch. Pharmacol. 364 (2001

Photolysis of p-Phenylbis(chlorodiazirine), Studied by Matrix Isolation Spectroscopy. Generation, Detection and Characterization of p-Phenylenebis(chloromethylene)

Tomioka, Hideo,Komatsu, Kazunori,Nakayama, Takehito,Shimizu, Masayoshi

, p. 1291 - 1294 (1993)

Photolysis of the title bis-diazirine matrix-isolated in Ar at 10 K monitored by IR and UV/vis spectroscopy indicated that the diazirine underwent stepwise elimination of N2 to produce 3-(4-chlorocarbenophenyl)-3-chlorodiazirine which then eliminated the

Br?nsted acid-catalyzed chlorination of aromatic carboxylic acids

Yu, Zhiqun,Yao, Hongmiao,Xu, Qilin,Liu, Jiming,Le, Xingmao,Ren, Minna

supporting information, p. 685 - 689 (2021/04/09)

The chlorination of aromatic carboxylic acids with SOCl2 has been effectively performed by reacting with a Br?nsted acid as the catalyst. Based on this discovery, an efficient catalytic method that is cheaper than traditional catalytic methods was developed. 20 substrates were chlorinated offering excellent yields in a short reaction time. And the SOCl2/Br?nsted acid system has been used in a larger scale preparative reaction. A dual activation mechanism was proposed to prove the irreplaceable system of SOCl2/Br?nsted acid.

BENZENE 1,4-BIS(BISPHOSPHONIC ACID)-BASED METAL COMPLEXES, METHOD OF SYNTHESIS AND APPLICATIONS THEREOF

-

Paragraph 0103; 0104, (2021/10/15)

The invention provides extended bisphosphonate-based metal complexes using benzene1,4-bis(bisphosphonic acid) (BBPA), an analog of benzene 1,4-dicarboxylic acid (BDC). Hydrothermal synthesis of BBPA with the bioactive metals Ca2+, Zn2+/su

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 100-20-9