Welcome to LookChem.com Sign In|Join Free

CAS

  • or

12058-85-4

Post Buying Request

12058-85-4 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

12058-85-4 Usage

Chemical Properties

Red solid. Decomposes on heating and in water, forming phosphine.

Hazard

Dangerous fire risk, reacts with water and acids to form phosphine.

Safety Profile

Flammable when exposed to heat or flame. Reacts violentlywith water to yield phosphine. When heated to decomposition it emits toxic fumes of Pox and Na2O. See also PHOSPHIDES.

Check Digit Verification of cas no

The CAS Registry Mumber 12058-85-4 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 1,2,0,5 and 8 respectively; the second part has 2 digits, 8 and 5 respectively.
Calculate Digit Verification of CAS Registry Number 12058-85:
(7*1)+(6*2)+(5*0)+(4*5)+(3*8)+(2*8)+(1*5)=84
84 % 10 = 4
So 12058-85-4 is a valid CAS Registry Number.
InChI:InChI=1/3Na.P/q3*+1;-3

12058-85-4SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 18, 2017

Revision Date: Aug 18, 2017

1.Identification

1.1 GHS Product identifier

Product name trisodium,phosphorus(3-)

1.2 Other means of identification

Product number -
Other names trisodium phosphorus(3-)

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:12058-85-4 SDS

12058-85-4Related news

Synthesis of InP nanocrystals from indium chloride and SODIUM PHOSPHIDE (cas 12058-85-4) by solution route08/02/2019

Indium phosphide nanocrystals have been synthesized by the direct reaction of sodium phosphide and indium trichloride pre-combined with n-trioctylphosphine in 4-ethylpyridine as a suitable solvent for terminating the particles growth. The formation of InP particles with the size of c.a. 3–7 nm ...detailed

12058-85-4Relevant articles and documents

One-pot synthesis of magnetic iron phosphide nanoparticles

Ahluwalia, Deepali,Varshney, Atul,Kumar, Sachin,Kumar, Anil,Warkar, Sudhir Gopalrao,Singh, Narendra,Dubey, Prashant

, p. 908 - 913 (2020)

A novel one-pot synthetic method to produce crystalline tri-octylphosphine (TOP) capped iron phosphide nanoparticles is reported here. Standard method of synthesizing FeP includes preparation of a precursor, sodium phosphide, which is finally reacted with ferric chloride (FeCl3).The methods for synthesizing iron phosphide (FeP), reported so far, rely on the use of toxic red or yellow phosphorus to generate the precursor, Sodium phosphide (Na3P). In present investigation, instead of red or yellow phosphorus, a relatively less toxic substance TOP and sodium metal (Na) have been used to yield Na3P. The synthesized nanoparticles were fully characterized by X-ray diffraction pattern (XRD), Infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM) and superconducting quantum interference device (SQUID) analyses. The results showed that the synthesized FeP nanoparticles have the characteristic orthorhombic crystal structures, with the size ~10 nm and the coercivity 70 Oe at RT.

NASICON SOLID ELECTROLYTES. PART IV. CHEMICAL DURABILITY.

Kreuer,Warhus

, p. 357 - 363 (1986)

The chemical durability of NASICON (Na//1// plus //xZr//2Si//xP//3// minus //xO//1//2, x equals 0-3) versus molten sodium and sulfur at 600 K has been investigated. Degradation by molten sodium has been observed for phosphorus-containing compositions only

On the Crystal Structure and Conductivity of Na3P

Eickhoff, Henrik,Dietrich, Christian,Klein, Wilhelm,Zeier, Wolfgang. G.,F?ssler, Thomas F.

, p. 28 - 33 (2021)

As a potential material for Na-ion battery systems and on the basis of a structural discussion of compounds formerly believed to crystallize in the so-called Na3As type the structure of Na3P has been reinvestigated. Na3P is found to crystallize in the Cu3P type, analogous to Na3As and is described by a three times larger unit cell [P63cm, a = 8.61224(10) ? and c = 8.81949(10) ?] compared to the former model [P63/mmc, a = 4.9512(5) ? and c = 8.7874(13) ?]. As a structural manifestation of this symmetry reduction corrugated layers of Na and P atoms are observed which had formerly to be described as planar. The high purity of the material further enables the determination of its properties, showing mainly semiconducting behavior with a conductivity of 12 S·cm–1 at room temperature.

Solvothermal preparation of tin phosphide nanorods

Xie, Yi,Su, Huilan,Li, Bin,Qian, Yitai

, p. 675 - 680 (2000)

Tin phosphide nanorods were successfully obtained through a mild and simple solvothermal route. The synthesis was performed through the solvothermal process based on metathesis reaction between SnCl2 and Na3P at 120-140 °C. Reaction conditions including solvent, temperature, and the valence state of raw materials thin salts were important factors to the morphology, crystallization, and purity of nanocrystalline Sn4P3.

Synthesis, Structure and Reactivity of a Cyapho-Cyanamide Salt

Erg??men, Doruk,Goicoechea, Jose M.

supporting information, p. 25286 - 25289 (2021/10/25)

We describe a facile synthesis of the cyapho-cyanamide salt [Na(18-crown-6)][N(CN)(CP)] from reaction of [Na(18-crown-6)][PH2] (18-crown-6=1,4,7,10,13,16-hexaoxacyclooctadecane) with dimethyl N-cyanocarbonimidate, (MeO)2C=N(CN). The reaction proceeds with elimination of two equivalents of methanol. Careful tuning of the reaction conditions allowed for the isolation and characterization of the N-cyano(carboximidate)phosphide intermediate [HP{C(OMe)N(CN)}]?. Due to the adverse effects of methanol in these reaction mixtures, a bulk scale synthesis of [Na(18-crown-6)][N(CN)(CP)] could be achieved by addition of a base (LiHMDS) to neutralize the resulting alcohol. Further reactivity studies of this anion reveal that functionalization at the phosphorus atom is viable to yield a new family of cyanide-functionalised phosphorus heterocycles.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 12058-85-4