13436-45-8Relevant articles and documents
-
Frehel,Deslongchamps
, p. 1783 (1972)
-
Selective hydrogenolysis of 2-furancarboxylic acid to 5-hydroxyvaleric acid derivatives over supported platinum catalysts
Asano, Takehiro,Takagi, Hiroshi,Nakagawa, Yoshinao,Tamura, Masazumi,Tomishige, Keiichi
, p. 6133 - 6145 (2019/11/20)
The conversion of 2-furancarboxylic acid (FCA), which is produced by oxidation of furfural, to 5-hydroxyvaleric acid (5-HVA) and its ester/lactone derivatives with H2 was investigated. Monometallic Pt catalysts were effective, and other noble metals were not effective due to the formation of ring-hydrogenation products. Supports and solvents had a small effect on the performance; however, Pt/Al2O3 was the best catalyst and short chain alcohols such as methanol were better solvents. The optimum reaction temperature was about 373 K, and at higher temperature the catalyst was drastically deactivated by deposition of organic materials on the catalyst. The highest yield of target products (5-HVA, δ-valerolactone (DVL), and methyl 5-hydroxyvalerate) was 62%, mainly obtained as methyl 5-hydroxyvalerate (55% yield). The byproducts were mainly ring-hydrogenation compounds (tetrahydrofuran-2-carboxylic acid and its ester) and undetected ones (loss of carbon balance). The catalyst was gradually deactivated during reuses even at a reaction temperature of 373 K; however, the catalytic activity was recovered by calcination at 573 K. The reactions of various related substrates were carried out, and it was found that the O-C bond in the O-CC structure (1,2,3-position of the furan ring) is dissociated before CC hydrogenation while the presence and position of the carboxyl group (or methoxy carbonyl group) much affect the reactivity.
Method for producing 1,4-butanediol
-
Example 1, (2008/06/13)
A process for preparing 1,4-butanediol and, if desired, gamma-butyrolactone and THF by oxidizing butane or benzene to form a product stream including maleic anhydride, absorbing maleic anhydride from the product stream with a high-boiling inert solvent in an absorption stage to give a liquid absorption product, esterifying the liquid absorption product with a C1-C5 esterifying alcohol in an esterification stage to form an esterification product comprising the corresponding diester and high-boiling inert solvent, then hydrogenating the esterification product to give a hydrogenation product which comprises the products of value, 1,4-butanediol and, if desired, gamma-butyrolactone and tetrahydrofuran and the esterifying alcohol and which is separated by distillation into the products of value and the esterifying alcohol, and recycling the esterifying alcohol to the esterification zone, which comprises separating the esterification product into the diester and the inert solvent by distillation under reduced pressure prior to the hydrogenation, recycling the inert solvent to the absorption stage, and hydrogenating the diester in the liquid phase over a fixed-bed catalyst.
