Welcome to LookChem.com Sign In|Join Free

CAS

  • or

135062-02-1

Post Buying Request

135062-02-1 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

135062-02-1 Usage

Diabetes Treatment

Repaglinide, a type of medicines for treating diabetes, is insulinotropic agent which belongs to the non-sulfonylurea. It was developed by Boehringer Ingelheim from Germany, and won approval by FDA from the United States in December 1997. In 1998, it was successively listed in the United States and European countries, with commodity name as NovoNorm. Mainly used in the clinical treatment of typeⅡdiabetes (non-insulin-dependent) patients whose hyperglycemia can’t be effectively controlled via diet, weight loss and exercise. In 2008, FDA from the United States approved it going public for Novo Nordisk of replaglinide + metformin HCl, PrandiMet, for treatment of type 2 diabetes. From the point of chemical structure, repaglinide derives from carbamyl methyl benzoic acid, and is a prandial glucose regulator which promots insulin secretion rapidly within short time. The functional mechanism is mainly by closing the potassium channels on the β cell membrane, causing calcium influx, and then intracellular calcium concentration increases, thereby stimulating insulin secretion. But with different acceptor sites of sulfonylurea reaction, the drug does not enter into the β cells, and it neither inhibits protein synthesis nor directly causes insulin action. With rapid absorption and metabolism, peak and half-life of this drug are approximately 1 hour. After taking the drug, the plasma insulin concentration rapidly increases, resulting in a significant decrease in blood glucose. Therefore, this product should be taken during the meal, not to eat not to take, which is the so-called “prandial glucose regulator ". Each dose is 0.25g and 2g. Flexible medication can reduce hypoglycemia caused by missing meals or delayed meal. After half a year medication, it can reduce postprandial blood sugar 6mmol/L, fasting blood-glucose 4mmol/L and HbAlc2%; when compared with placebo, it can better improve blood glucose control. Repaglinide is as effective as metformin on obese patients with type 2 diabetes blood glucose; effect of combined use with metformin is better than when it is used alone. Safety studies showed no severe hypoglycemia and liver damage, few drug interactions, and patients were well tolerated. Treatment of diabetic drug repaglinide clinical evaluation, adverse reactions, precautions was edited by Tongtong from lookchem.

Chemical properties

White crystalline powder, odorless. Crystallization from ethanol-water (2:1), melting point 126-128℃. Crystallization from neutral water, melting point 130~131℃. [α]D20+6.97℃ (C=0.975, methanol); [α]D20+7.45°(C=1.06, methanol). Acute toxicity LD50. Rat (g/kg): > 1 oral.

Pharmacokinetics

(1) After oral administration, this medicine would be absorbed rapidly; when fed in 2mg to vein at constant speed for 15min, distribution volumes of steady state and clearance phase were respectively 24.37L and 28.89L. Healthy people taking different doses of this product, cmax and AUC showed a dose-dependent increase, but their cmax is similar; a single dose of 2mg, cmax is 15.2~15.5 mg/ml and t1/2 is 0.6 to 0.7h. 98% of this product is metabolized by liver cytochrome P4503A, with 90% of the metabolic products excreted by the bile via feces, and the rest 8% of the metabolites excreted by the kidney. The plasma protein binding rate was 97%, which had no significant accumulation. (2) In intravenous injection, its clearance half-life is 0.6 (1.4~0.5) h, plasma clearance rate is 33 (57~15) L h-1 and the apparent distribution volume is 28.9L. Oral administration of repaglinide has a rapid and complete absorption, either in fasting or eating, it would be well absorbed. Plasma peak achieved after 30~60min, and the half-life was approximately 1h. It would be almost metabolized and eliminated in 4h, and the apparent distribution volume of the steady-state is 0.4L?kg-1. The absolute bioavailability is 63%. The main metabolites are dicarboxylic acid derivative (M1) and glycuronic acid (M7), both are non-hypoglycemic activity. Studies have shown that healthy subjects at different ages (18 to 40 year old adults and elderly people over the age of 65) taking 2.0mg single dose repaglinide or repeatedly after medication, the AUC, cmax, tmax and t1/2 would have no significant difference. Its incidence of tolerance and hypoglycemia are the same, and its pharmacokinetics and pharmacodynamics are quite similar. Amount-effect relationship of single or multiple medication for healthy subjects and patients with typeⅡdiabetes shows that repaglinide plasma cmax is dose dependent. After single or multiple dosing, for patients with typeⅡdiabetes and healthy subjects, the pharmacokinetic parameters are consistent. No significant difference between different ethnic groups. For patients with severe renal impairment, after 7d taking 2.0 mg single dose repaglinide, the clearance rate constant decreases. But compared with healthy subjects, after administration of a single dose or multiple doses of repaglinide, the AUC significantly increased, without significant difference to Cmax and Tmax. Hemodialysis has no significant effect on clearance of repaglinide.

Uses

Different sources of media describe the Uses of 135062-02-1 differently. You can refer to the following data:
1. 1. Anti-diabetic medicine. Oral non-sulfonylurea hypoglycemic agent, for the treatment of typeⅡdiabetes. 2. Used as hypolycemic agent.
2. Non-sulfonylurea oral hypoglycemic agent. Used as an antidiabetic
3. The R-enantiomer showed only weak hypoglycemic activity. Repaglinide impurity
4. antineoplastic
5. A KIR6 (KATP) channel blocker

Production method

Convert the compounds (Ⅰ) to their N-acetyl derivatives, with L-glutamate to get salt and then get (S) shaped optical isomer; react with the compounds (Ⅱ) to form amide (Ⅲ) and then hydrolyzed to obtain the product.

Dosage and administration

Tablet: 0.5mg, 1.0mg and 2.0mg. Repaglinide (trade name: NovoNorm) should be taken before main meals (i.e. medicine taken before meals). It would start to promote insulin secretion after 30 minutes of oral administration. Generally speaking the medicine should be taken within 15 minutes before the meal, and the time can also be mastered within 0 to 30 minutes before the meal. Please take repaglinide as directed. Doses vary from person to person and depend on their blood glucose. The recommended starting dose is 0.5mg, which can be adjusted every week or every two weeks as necessary. Patients under treatment of other oral hypoglycemic medicines can be directly transferred to repaglinide treatment, and the recommended starting dose is 1mg. The maximum recommended dose for a single dose is 4mg, taking with meals. But the maximum daily dose should not exceed 16mg. For patients with debilitating and malnutrition, the dose should be carefully adjusted. If combined with metformin, repaglinide dose should be reduced. Although repaglinide is mainly by biliary excretion, renal insufficiency patients still should use with caution.

Clinical assessment

By detecting the level of glycosylated hemoglobin (HbAlc), fasting blood glucose (FBG) and postprandial blood glucose (PPBG), it was confirmed that the blood glucose control in patients with typeⅡdiabetes can be significantly better improved compared with placebo. Several clinical trials are outlined below: studies show that for patients with type II diabetes, compared with placebo, it can reduce FBG and PPBG respectively 4mmol/L and 6mmol/L, and also reduce 2% of HbAlc. Control experiments with glibenclamide showed that repaglinide can significantly reduce PPBG, FBG and fasting C peptide level (P < 0.05), while glibenclamide only significantly reduced FBG (P < 0.01), with no effect on PPBG and a significant increase in C peptide levels (P < 0.05). The change of C peptide level showed that the product had protective effect on the function of islet β cell. Test with 048/DK/N/S/SF was conducted to compare 1 year treatment between this product and sulfonylurea drug.The results showed that HbAlc and FBG level changes of the treatment group are 0.19% and 0.5 mmol/L respectively, while glipizide group were 0.78% and 1.3mmol/L respectively, and plasma insulin levels in the patients decreased significantly; 053/AUS clinical trials showed when this product was used with metformin in the treatment of type II diabetes, it had a synergistic effect in glycemic control, and HbAlc and FBG were also significantly improved. After 3 month treatment, about 20% of the patients received good glycemic control with the single use of the product and the single use of metformin, while 25% of them had poor control of the blood glucose. In the combined treatment group, 60% patients obtained good blood sugar control, and not any of those patients was in poor blood glucose control. The product was well tolerated, and the risk of hypoglycemia was lower than that of the application of sulfonylureas, and there was no severe hypoglycemia. This product is also applicable to the special patient population such as the elderly or patients with mild liver and kidney damage. Randomized, double-blind, controlled study of 120 patients was conducted in a period of 12 weeks, among which 68 cases in treatment group, orally taking 0.5mg or 1mg repaglinide 15min before meals, 52 cases in the control group, orally taking 1.25mg glipizide before breakfas. The results showed that the two dose groups in the treatment group can reduce fasting blood glucose (FBG) 2.1mmol/L and 3.6 mmol/L respectively; glycosylated hemoglobin Alc(HbG) were reduced by 1.6% and 1.9% respectively, and postprandial 2h plasma glucose (PPG) were reduced by 3.6 and 5.1 mmol/L respectively. In the control group, FPG was decreased by 0.8mmol/L, and HbG was decreased by 1%. There were significant differences between the 2 groups.

Adverse reaction

Same as other hypoglycemic drugs, taking repaglinide may occur following adverse reactions: 1. Hypoglycemia: these reactions are usually mild, and to be easily corrected by giving sugar. If it is more severe, glucose can be transfused. 2. Anomalopia: It has been known that changes in blood glucose levels can lead to transient anomalopia, especially at the beginning of treatment. Only a few cases reported above mentioned anomalopia occured at the beginning treatment of repaglinide, but in clinical trials there is no case stopped using repaglinide due to this reason. 3. Gastrointestinal tract: clinical trials have reported gastrointestinal reactions, such as abdominal pain, diarrhea, nausea, vomiting and constipation. Compared with other oral hypoglycemic agents, the frequency and severity of these symptoms were not different. 4. Liver enzyme system: there were rare cases reported elevated liver enzyme index during repaglinide treatment. Most cases were mild and transient, and very few patients discontinued repaglinide treatment due to increased liver enzyme index. 5. Anaphylactic reaction: can occur in the skin allergic reactions, such as itching, redness, urticaria, etc. Because of the different chemical structure, there is no reason to suspect the possibility of cross allergic reaction with sulfonylureas.?? Studies have not been carried out in pregnant or lactating women, so the pregnancy and lactation women are prohibited to use this product.

Attentions

1. Like most other oral hypoglycemic drugs promoting insulin secretion, repaglinide can cause hypoglycemia. When used in combination with metformin, it may increase the risk of hypoglycemia. If after the treatment of combined medication it still sustained high blood glucose, oral hypoglycemic drugs can no longer be used to control blood sugar, and insulin treatment is needed. In the event of stress reaction, such as having a fever, trauma, infection or surgery, it may appear hyperglycemia. 2. As with other oral hypoglycemic agents, patients must use it with caution, to avoid hypoglycemia while driving. 3. Medication overdose may cause hypoglycemia, such as dizziness, sweating, tremor, headache, etc. In response to these reactions, effective measures should be taken to correct hypoglycemia, such as oral sugars. More severe hypoglycemia associated with epilepsy, loss of consciousness or coma, should be intravenous infusion of glucose. 4. Hypoglycemic effect of repaglinide will due to enhanced when in combined use with monoamine oxidase inhibitor (MAOI), non-selective β blockers, angiotensin converting enzyme inhibitor (ACEI), non-steroidal anti-inflammatory drugs, salicylate, octreotide, ethanol and hormones that promote the synthesis of metabolism. 5. It will weaken the hypoglycemic effect when in combination use of oral contraceptives, thiazide drug, corticosteroids, danazol, thyroid hormone and sympathomimetic drug. 6. CYP3A4 inhibitors (such as ketoconazole, itraconazole, and fluconazole), erythromycin and M Bifadier may elevate plasma levels of this product. 7. For drugs able to induce CYP3A4, such as rifampicin or phenytoin, it may reduce the plasma level of this product.

Description

Different sources of media describe the Description of 135062-02-1 differently. You can refer to the following data:
1. Repaglinide was marketed in the US as an orally active hypoglycemic agent in patients with a type Ⅱ diabetes mellitus, to lower blood glucose in synergistic combination with metformin, when hyperglycemia cannot be controlled by diet, exercise or metformin alone. Chiral (S)-repaglinide can be synthesized in several ways, each involving a stereoselective reduction of an imine or enamine group. Repaglinide is a nonsulfonylurea belonging to the meglitinide family, with an insulin-releasing effect mediated by pancreatic betacells, by closing the ATP-sensitive K+ channels that, in turn, increases the cytosolic concentration of Ca++. In several animal models, repaglinide was more efficient than glibenclamide as a dose-dependant promoter of insulin release, but its mechanism of action is probably slightly different. Repaglinide has a rapid onset of action, a short duration of action and a reduced risk of hypoglycemia compared to glyburide.
2. Repaglinide is a metaglitinide antidiabetic agent that blocks ATP-dependent potassium (Kir6) channels in pancreatic β-cells (Kd = 0.42 nM for the sulphonylurea receptor SUR1 when co-expressed with Kir6.2). In vivo, repaglinide lowers blood glucose in fasted rats and dogs (ED50s = 10 and 28.3 μg/kg, respectively). Formulations containing repaglinide have been used to control blood sugar levels in patients with type 2 diabetes.

Chemical Properties

White to Off-White Solid

Originator

Boehringer Ingelheim (Germany)

Brand name

Prandin (Novo Nordisk).

General Description

Different sources of media describe the General Description of 135062-02-1 differently. You can refer to the following data:
1. Repaglinide is 2-ethoxy-4-[2-[[(1S)-3-methyl-1-[2-(1-piperidinyl)phenyl]butyl]amino]-2-oxoethyl]benzoic acid(Prandin); approvals for generics are pending. Combinationsare available with metformin in the United States(Prandimet), and the drug may also be coprescribed with oneof the thiazolidinediones (typically pioglitazone or rosiglitazone;see previous discussion). To establish the most clinicallyvaluable dose, the patient is titrated while monitoringblood glucose levels and hemoglobin glycosylation (HbA1c)as an index of longer-term overall control.
2. Repaglinide, (+)-2-ethoxy-4-[N-[3-methyl-1(S)-[2-(1-piperidinyl) phenyl]butyl]carbamoyl-methyl]benzoicacid (Prandin), represents a new class of nonsulfonylureaoral hypoglycemic agents. With a fast onset and ashort duration of action, the medication should be taken withmeals. It is oxidized by CYP 3A4, and the carboxylic acidmay be conjugated to inactive compounds. Less than 0.2%is excreted unchanged by the kidney, which may be an advantagefor elderly patients who are renally impaired. Themost common side effect involves hypoglycemia, resultingin shakiness, headache, cold sweats, anxiety, and changes inmental state.

Biological Activity

K ATP channel blocker that binds with high affinity for SUR1 when co-expressed with Kir6.2 (K d = 0.42 nM). Antidiabetic glucose regulator with hypoglycaemic effect in vivo .

Biochem/physiol Actions

Repaglinide is a potent short-acting insulin secretagogue that acts by closing ATP-sensitive potassium (KATP) channels in the plasma membrane of the pancreatic beta cell. It represents a new class of insulin secretagogues, structurally unrelated to sulphonylureas, which were developed for the treatment of type 2 diabetes.

Clinical Use

Repaglinide is a nonsulfonylurea insulin secretagogue that was introduced in the United States in 1998 for type 2 diabetes.

Drug interactions

Potentially hazardous interactions with other drugs Antibacterials: effects enhanced by clarithromycin and possibly trimethoprim - avoid with trimethoprim; hypoglycaemic effect antagonised by rifampicin. Antifungals: effect possibly enhanced by itraconazole. Ciclosporin: may increase repaglinide concentration, possibly enhanced hypoglycaemic effect. Clopidogrel: avoid concomitant use if possible due to increased repaglinide exposure. Cytotoxics: avoid with lapatinib. Lipid-lowering agents: increased risk of severe hypoglycaemia with gemfibrozil - avoid.

Metabolism

Repaglinide appears to be a substrate for active hepatic uptake by the organic anion transporting protein OATP1B1, and undergoes almost complete hepatic metabolism involving the cytochrome P450 isoenzymes CYP2C8 and CYP3A4. The glucuronidation of repaglinide is thought to involve uridine diphosphate glucuronosyltransferase (UGT) enzymes, particularly UGT1A1. The metabolites, which are inactive, are excreted in the bile.

Check Digit Verification of cas no

The CAS Registry Mumber 135062-02-1 includes 9 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 6 digits, 1,3,5,0,6 and 2 respectively; the second part has 2 digits, 0 and 2 respectively.
Calculate Digit Verification of CAS Registry Number 135062-02:
(8*1)+(7*3)+(6*5)+(5*0)+(4*6)+(3*2)+(2*0)+(1*2)=91
91 % 10 = 1
So 135062-02-1 is a valid CAS Registry Number.
InChI:InChI=1/C27H36N2O4/c1-4-33-25-17-20(12-13-22(25)27(31)32)18-26(30)28-23(16-19(2)3)21-10-6-7-11-24(21)29-14-8-5-9-15-29/h6-7,10-13,17,19,23H,4-5,8-9,14-16,18H2,1-3H3,(H,28,30)(H,31,32)/t23-/m0/s1

135062-02-1 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • TCI America

  • (R0179)  Repaglinide  >98.0%(HPLC)(T)

  • 135062-02-1

  • 200mg

  • 760.00CNY

  • Detail
  • TCI America

  • (R0179)  Repaglinide  >98.0%(HPLC)(T)

  • 135062-02-1

  • 1g

  • 2,390.00CNY

  • Detail
  • Sigma-Aldrich

  • (Y0000457)  Repaglinide  European Pharmacopoeia (EP) Reference Standard

  • 135062-02-1

  • Y0000457

  • 1,880.19CNY

  • Detail
  • Sigma-Aldrich

  • (Y0000458)  Repaglinide for system suitability  European Pharmacopoeia (EP) Reference Standard

  • 135062-02-1

  • Y0000458

  • 1,880.19CNY

  • Detail
  • Sigma

  • (R9028)  Repaglinide  ≥98% (HPLC), solid

  • 135062-02-1

  • R9028-50MG

  • 1,724.58CNY

  • Detail
  • Sigma

  • (R9028)  Repaglinide  ≥98% (HPLC), solid

  • 135062-02-1

  • R9028-250MG

  • 6,885.45CNY

  • Detail
  • USP

  • (1600813)  Repaglinide  United States Pharmacopeia (USP) Reference Standard

  • 135062-02-1

  • 1600813-200MG

  • 4,662.45CNY

  • Detail

135062-02-1SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 10, 2017

Revision Date: Aug 10, 2017

1.Identification

1.1 GHS Product identifier

Product name Repaglinide

1.2 Other means of identification

Product number -
Other names (S)-2-Ethoxy-4-(2-((3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)amino)-2-oxoethyl)benzoic acid

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:135062-02-1 SDS

135062-02-1Synthetic route

(S)-(+)-ethyl 2-ethoxy-4-<2-<<3-methyl-1-<2-(1-piperidinyl)phenyl>butyl>amino>-2-oxoethyl>-benzoate
147770-06-7

(S)-(+)-ethyl 2-ethoxy-4-<2-<<3-methyl-1-<2-(1-piperidinyl)phenyl>butyl>amino>-2-oxoethyl>-benzoate

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
With ethanol; water; sodium hydroxide Reflux;96%
With sodium hydroxide In ethanol at 60℃; for 4h;92%
With methanol; sodium hydroxide for 3h; Reflux;87.6%
C28H38N2O4

C28H38N2O4

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
With potassium hydroxide In acetonitrile for 6h; Reflux;89.9%
C34H42N2O4

C34H42N2O4

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
With ethanol; sodium hydroxide for 5h; Reflux;85.1%
piperidine
110-89-4

piperidine

trityl thiosemicarbazide resin

trityl thiosemicarbazide resin

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 6 steps
1.1: 64.5 g / 6 h / 220 - 225 °C
2.1: Mg; I2 / tetrahydrofuran / 1 h / 60 - 65 °C / Heating
2.2: toluene; tetrahydrofuran / 14 h / 98 - 102 °C
3.1: 68.9 g / NaBH4 / methanol / 10 - 15 °C
4.1: N-acetyl-L-glutamic acid / acetone
5.1: 80 percent / N,N-dicyclohexylcarbodiimide / CH2Cl2 / 20 °C
6.1: aq. NaOH / propan-2-ol / 60 - 65 °C
View Scheme
2-(piperidin-1-yl)benzonitrile
72752-52-4

2-(piperidin-1-yl)benzonitrile

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 5 steps
1.1: Mg; I2 / tetrahydrofuran / 1 h / 60 - 65 °C / Heating
1.2: toluene; tetrahydrofuran / 14 h / 98 - 102 °C
2.1: 68.9 g / NaBH4 / methanol / 10 - 15 °C
3.1: N-acetyl-L-glutamic acid / acetone
4.1: 80 percent / N,N-dicyclohexylcarbodiimide / CH2Cl2 / 20 °C
5.1: aq. NaOH / propan-2-ol / 60 - 65 °C
View Scheme
2-Chlorobenzonitrile
873-32-5

2-Chlorobenzonitrile

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 6 steps
1.1: 64.5 g / 6 h / 220 - 225 °C
2.1: Mg; I2 / tetrahydrofuran / 1 h / 60 - 65 °C / Heating
2.2: toluene; tetrahydrofuran / 14 h / 98 - 102 °C
3.1: 68.9 g / NaBH4 / methanol / 10 - 15 °C
4.1: N-acetyl-L-glutamic acid / acetone
5.1: 80 percent / N,N-dicyclohexylcarbodiimide / CH2Cl2 / 20 °C
6.1: aq. NaOH / propan-2-ol / 60 - 65 °C
View Scheme
(1S)-3-methyl-1-(2-piperidin-1-ylphenyl)butan-1-amine
147769-93-5

(1S)-3-methyl-1-(2-piperidin-1-ylphenyl)butan-1-amine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 2 steps
1: 80 percent / N,N-dicyclohexylcarbodiimide / CH2Cl2 / 20 °C
2: aq. NaOH / propan-2-ol / 60 - 65 °C
View Scheme
Multi-step reaction with 2 steps
1: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
2: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 2 steps
1.1: 4-methyl-morpholine; pivaloyl chloride / dichloromethane / 1 h / 0 - 5 °C
1.2: 15 h / 0 - 20 °C
2.1: sodium hydroxide / ethanol / 1 h / 20 °C / Reflux
View Scheme
Multi-step reaction with 2 steps
1: tetramethylorthosilicate / toluene / 10 h / Inert atmosphere; Reflux
2: sodium hydroxide; ethanol / 5 h / Reflux
View Scheme
Multi-step reaction with 2 steps
1: tetramethylorthosilicate / toluene / 11 h / Inert atmosphere; Reflux
2: sodium hydroxide; methanol / 3 h / Reflux
View Scheme
(S)-1-(2-piperidino-phenyl)-3-methyl-1-butylamine
108157-52-4

(S)-1-(2-piperidino-phenyl)-3-methyl-1-butylamine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: N-acetyl-L-glutamic acid / acetone
2: 80 percent / N,N-dicyclohexylcarbodiimide / CH2Cl2 / 20 °C
3: aq. NaOH / propan-2-ol / 60 - 65 °C
View Scheme
Multi-step reaction with 3 steps
1: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 3 steps
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
3-methyl-1-[2-(piperidin-1-yl)phenyl]butan-1-imine
147769-96-8

3-methyl-1-[2-(piperidin-1-yl)phenyl]butan-1-imine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: 68.9 g / NaBH4 / methanol / 10 - 15 °C
2: N-acetyl-L-glutamic acid / acetone
3: 80 percent / N,N-dicyclohexylcarbodiimide / CH2Cl2 / 20 °C
4: aq. NaOH / propan-2-ol / 60 - 65 °C
View Scheme
Multi-step reaction with 5 steps
1: 34 percent / toluene / 15 h / Ambient temperature
2: H2, NaOH, Et3N, Ti(OiPr)4 / Ru(OAc)2<(S)-BINAP> / methanol; CH2Cl2 / 170 h / 30 °C / 75006 Torr
3: aq. HCl / 5.5 h / Heating
4: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 6 steps
1: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
2: 63 percent / Et3N, TiCl4 / toluene / Ambient temperature
3: 76 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 72 h / 50 °C / 150012 Torr
4: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
5: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
6: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
piperidine
110-89-4

piperidine

3.) methyl halide

3.) methyl halide

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 7 steps
1: 84 percent / N-formyl-piperidine / 64 h / 160 - 170 °C
2: tetrahydrofuran; toluene / 3 h / Heating
3: 34 percent / toluene / 15 h / Ambient temperature
4: H2, NaOH, Et3N, Ti(OiPr)4 / Ru(OAc)2<(S)-BINAP> / methanol; CH2Cl2 / 170 h / 30 °C / 75006 Torr
5: aq. HCl / 5.5 h / Heating
6: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 8 steps
1: 84 percent / N-formyl-piperidine / 64 h / 160 - 170 °C
2: tetrahydrofuran; toluene / 3 h / Heating
3: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
4: 63 percent / Et3N, TiCl4 / toluene / Ambient temperature
5: 76 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 72 h / 50 °C / 150012 Torr
6: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
7: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
8: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 8 steps
1: 84 percent / N-formyl-piperidine / 64 h / 160 - 170 °C
2: tetrahydrofuran; toluene / 3 h / Heating
3: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
4: Et3N, TiCl4 / toluene / Ambient temperature
5: 66 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 160 h / 160 °C / 150012 Torr
6: H2, aq. HCl / 10 percent Pd/C / 10 h / 50 °C / 3750.3 Torr
7: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
8: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
2-(piperidin-1-yl)benzonitrile
72752-52-4

2-(piperidin-1-yl)benzonitrile

cyclohexyl-CH2-MgX

cyclohexyl-CH2-MgX

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 6 steps
1: tetrahydrofuran; toluene / 3 h / Heating
2: 34 percent / toluene / 15 h / Ambient temperature
3: H2, NaOH, Et3N, Ti(OiPr)4 / Ru(OAc)2<(S)-BINAP> / methanol; CH2Cl2 / 170 h / 30 °C / 75006 Torr
4: aq. HCl / 5.5 h / Heating
5: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
6: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 7 steps
1: tetrahydrofuran; toluene / 3 h / Heating
2: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
3: 63 percent / Et3N, TiCl4 / toluene / Ambient temperature
4: 76 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 72 h / 50 °C / 150012 Torr
5: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
6: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 7 steps
1: tetrahydrofuran; toluene / 3 h / Heating
2: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
3: Et3N, TiCl4 / toluene / Ambient temperature
4: 66 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 160 h / 160 °C / 150012 Torr
5: H2, aq. HCl / 10 percent Pd/C / 10 h / 50 °C / 3750.3 Torr
6: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
2-Chlorobenzonitrile
873-32-5

2-Chlorobenzonitrile

2-chloro-benzaldehyde seqtrans-oxime

2-chloro-benzaldehyde seqtrans-oxime

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 7 steps
1: 84 percent / N-formyl-piperidine / 64 h / 160 - 170 °C
2: tetrahydrofuran; toluene / 3 h / Heating
3: 34 percent / toluene / 15 h / Ambient temperature
4: H2, NaOH, Et3N, Ti(OiPr)4 / Ru(OAc)2<(S)-BINAP> / methanol; CH2Cl2 / 170 h / 30 °C / 75006 Torr
5: aq. HCl / 5.5 h / Heating
6: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 8 steps
1: 84 percent / N-formyl-piperidine / 64 h / 160 - 170 °C
2: tetrahydrofuran; toluene / 3 h / Heating
3: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
4: 63 percent / Et3N, TiCl4 / toluene / Ambient temperature
5: 76 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 72 h / 50 °C / 150012 Torr
6: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
7: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
8: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 8 steps
1: 84 percent / N-formyl-piperidine / 64 h / 160 - 170 °C
2: tetrahydrofuran; toluene / 3 h / Heating
3: 4N aq. HCl / toluene; tetrahydrofuran / 20 °C
4: Et3N, TiCl4 / toluene / Ambient temperature
5: 66 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 160 h / 160 °C / 150012 Torr
6: H2, aq. HCl / 10 percent Pd/C / 10 h / 50 °C / 3750.3 Torr
7: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
8: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
2-hydroxy-p-toluic acid
50-85-1

2-hydroxy-p-toluic acid

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 7 steps
1: K2CO3 / diethyl ether / 30 h / 150 °C
2: N-bromosuccinimide, 2,2'-azo-bis-(isobutyronitril) / CCl4
3: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
4: HCl / Heating
5: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
6: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 8 steps
1: K2CO3 / diethyl ether / 30 h / 150 °C
2: N-bromosuccinimide, 2,2'-azo-bis-(isobutyronitril) / CCl4
3: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
4: HCl / Heating
5: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
6: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
8: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 7 steps
1: K2CO3 / diethyl ether / 30 h / 150 °C
2: N-bromosuccinimide, 2,2'-azo-bis-(isobutyronitril) / CCl4
3: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
4: HCl / Heating
5: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
6: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
ethyl 2-ethoxy-4-methyl-benzoate
88709-17-5

ethyl 2-ethoxy-4-methyl-benzoate

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 6 steps
1: N-bromosuccinimide, 2,2'-azo-bis-(isobutyronitril) / CCl4
2: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
3: HCl / Heating
4: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
5: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
6: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 7 steps
1: N-bromosuccinimide, 2,2'-azo-bis-(isobutyronitril) / CCl4
2: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
3: HCl / Heating
4: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
5: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 6 steps
1: N-bromosuccinimide, 2,2'-azo-bis-(isobutyronitril) / CCl4
2: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
3: HCl / Heating
4: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
5: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
6: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
2-(piperidin-1-yl)benzaldehyde
34595-26-1

2-(piperidin-1-yl)benzaldehyde

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 5 steps
1: Ambient temperature
2: Ti(OiPr)4 / tetrahydrofuran; toluene / 60 h / 100 °C
3: H2, aq. HCl / 10 percent Pd/C / 5 h / 50 °C / 3750.3 Torr
4: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 5 steps
1.1: titanium(IV) tetraethanolate / tetrahydrofuran / 20 - 65 °C
2.1: magnesium / tetrahydrofuran; dichloromethane / 1 h / -50 - 20 °C
3.1: hydrogenchloride / water / 20 °C
4.1: 4-methyl-morpholine; pivaloyl chloride / dichloromethane / 1 h / 0 - 5 °C
4.2: 15 h / 0 - 20 °C
5.1: sodium hydroxide / ethanol / 1 h / 20 °C / Reflux
View Scheme
Multi-step reaction with 5 steps
1.1: titanium(IV) tetraethanolate / tetrahydrofuran / 20 - 65 °C
2.1: magnesium / tetrahydrofuran; dichloromethane / 1 h / -50 - 20 °C
3.1: hydrogenchloride / water / 20 °C
4.1: 4-methyl-morpholine; pivaloyl chloride / dichloromethane / 1 h / 0 - 5 °C
4.2: 15 h / 0 - 20 °C
5.1: sodium hydroxide / ethanol / 1 h / 20 °C / Reflux
View Scheme
ethyl 4-bromomethyl-2-ethoxy-benzoate
110017-07-7

ethyl 4-bromomethyl-2-ethoxy-benzoate

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 5 steps
1: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
2: HCl / Heating
3: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
4: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 6 steps
1: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
2: HCl / Heating
3: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
4: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
6: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 5 steps
1: 97 percent / aq. N-benzyl-tri-n-butylammonium-chloride / CH2Cl2 / 43 h / 20 °C
2: HCl / Heating
3: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
4: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
ethyl 4-cyanomethyl-2-ethoxy-benzoate
99470-01-6

ethyl 4-cyanomethyl-2-ethoxy-benzoate

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: HCl / Heating
2: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
3: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 5 steps
1: HCl / Heating
2: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
3: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 4 steps
1: HCl / Heating
2: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
3: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
3-methyl-1-(2-piperidin-1-yl-phenyl)-butan-1-one
147770-03-4

3-methyl-1-(2-piperidin-1-yl-phenyl)-butan-1-one

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 5 steps
1: 63 percent / Et3N, TiCl4 / toluene / Ambient temperature
2: 76 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 72 h / 50 °C / 150012 Torr
3: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
4: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 5 steps
1: Et3N, TiCl4 / toluene / Ambient temperature
2: 66 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 160 h / 160 °C / 150012 Torr
3: H2, aq. HCl / 10 percent Pd/C / 10 h / 50 °C / 3750.3 Torr
4: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
5: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
ethyl 4-(2-amino-2-oxoethyl)-2-ethoxybenzoate

ethyl 4-(2-amino-2-oxoethyl)-2-ethoxybenzoate

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: 39 percent / aq. NaNO2, aq. HCl / 2 h / 35 °C
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 4 steps
1: 39 percent / aq. NaNO2, aq. HCl / 2 h / 35 °C
2: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 3 steps
1: 39 percent / aq. NaNO2, aq. HCl / 2 h / 35 °C
2: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
2-(3-ethoxy-4-(ethoxycarbonyl)phenyl) acetic acid
99469-99-5

2-(3-ethoxy-4-(ethoxycarbonyl)phenyl) acetic acid

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 2 steps
1: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
2: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 3 steps
1: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 2 steps
1: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
2: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
ethyl 2-ethoxy-4-(2-ethoxy-2-oxoethyl)benzoate
332347-69-0

ethyl 2-ethoxy-4-(2-ethoxy-2-oxoethyl)benzoate

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 4 steps
1: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
2: 85 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
Multi-step reaction with 3 steps
1: 59 percent / NaOH / ethanol / 1.5 h / 23 - 25 °C
2: 59 percent / N,N'-dicyclohexyl-carbodiimide / toluene / 2 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
N-acetyl-N-<(S)-3-methyl-1-(2-(1-piperidinyl)phenyl)-1-butyl>-amine
147769-98-0

N-acetyl-N-<(S)-3-methyl-1-(2-(1-piperidinyl)phenyl)-1-butyl>-amine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: aq. HCl / 5.5 h / Heating
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
N-acetyl-N-<3-methyl-1-(2-(1-piperidinyl)phenyl)-1-(Z)-buten-1-yl>-amine
147769-97-9

N-acetyl-N-<3-methyl-1-(2-(1-piperidinyl)phenyl)-1-(Z)-buten-1-yl>-amine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: H2, NaOH, Et3N, Ti(OiPr)4 / Ru(OAc)2<(S)-BINAP> / methanol; CH2Cl2 / 170 h / 30 °C / 75006 Torr
2: aq. HCl / 5.5 h / Heating
3: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
<2-(1-piperidinyl)phenyl>-N-<(R')-1-phenethyl>-aldimine

<2-(1-piperidinyl)phenyl>-N-<(R')-1-phenethyl>-aldimine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: Ti(OiPr)4 / tetrahydrofuran; toluene / 60 h / 100 °C
2: H2, aq. HCl / 10 percent Pd/C / 5 h / 50 °C / 3750.3 Torr
3: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
N-<(S)-3-methyl-1-<2-(1-piperidinyl)phenyl>butyl>-N-<(R')-1-phenethyl>-amine
219922-07-3

N-<(S)-3-methyl-1-<2-(1-piperidinyl)phenyl>butyl>-N-<(R')-1-phenethyl>-amine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: H2, aq. HCl / 10 percent Pd/C / 5 h / 50 °C / 3750.3 Torr
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
N-<(S)-3-methyl-1-<2-(1-pieridinyl)phenyl>butyl>-N-<(S')-1-phenethyl>-amine
147770-01-2

N-<(S)-3-methyl-1-<2-(1-pieridinyl)phenyl>butyl>-N-<(S')-1-phenethyl>-amine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
N-<(R)-3-methyl-1-<2-(1-piperidinyl)phenyl>butyl>-N-<(R')-1-phenethyl>-amine
219921-97-8

N-<(R)-3-methyl-1-<2-(1-piperidinyl)phenyl>butyl>-N-<(R')-1-phenethyl>-amine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: H2, aq. HCl / 10 percent Pd/C / 10 h / 50 °C / 3750.3 Torr
2: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
3: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
isobutyl-(2-piperidino-phenyl)-N-<(R')-1-phenethyl>-ketimine

isobutyl-(2-piperidino-phenyl)-N-<(R')-1-phenethyl>-ketimine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: 66 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 160 h / 160 °C / 150012 Torr
2: H2, aq. HCl / 10 percent Pd/C / 10 h / 50 °C / 3750.3 Torr
3: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
isobutyl-(2-piperidino-phenyl)-N-<(S')-1-phenethyl>-ketimine

isobutyl-(2-piperidino-phenyl)-N-<(S')-1-phenethyl>-ketimine

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: 76 percent / H2, Ti(O-iPr)4 / Raney-Ni / ethanol / 72 h / 50 °C / 150012 Torr
2: H2, aq. HCl / 10 percent Pd/C / H2O / 5 h / 50 °C / 3750.3 Torr
3: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
4: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
N-(2-piperidino-benzyl)-2-piperidino-benzaldimine

N-(2-piperidino-benzyl)-2-piperidino-benzaldimine

cycloheptyl-CH2-halide

cycloheptyl-CH2-halide

(S)-repaglinide
135062-02-1

(S)-repaglinide

Conditions
ConditionsYield
Multi-step reaction with 7 steps
1: 1.) LDA / 1.) THF, hexane, -20 deg C, 30 min, 2.) THF, hexane, from -70 deg C to RT, overnight
2: HCl / 0.5 h / 0 °C
3: Ambient temperature
4: Ti(OiPr)4 / tetrahydrofuran; toluene / 60 h / 100 °C
5: H2, aq. HCl / 10 percent Pd/C / 5 h / 50 °C / 3750.3 Torr
6: 29 percent / PPh3, Et3N, CCl4 / acetonitrile / 15 h / Ambient temperature
7: 92 percent / 1N NaOH / ethanol / 4 h / 60 °C
View Scheme
1-deoxy-1-(methylamino)-D-glucitol
6284-40-8

1-deoxy-1-(methylamino)-D-glucitol

(S)-repaglinide
135062-02-1

(S)-repaglinide

C27H36N2O4*C7H17NO5

C27H36N2O4*C7H17NO5

Conditions
ConditionsYield
With 3-methyl-1-butyl acetate In chloroform at 65℃; Temperature;95.2%
berberine chloride
633-65-8

berberine chloride

(S)-repaglinide
135062-02-1

(S)-repaglinide

repaglinide berberine

repaglinide berberine

Conditions
ConditionsYield
With sodium hydroxide In ethanol at 60 - 70℃; pH=7 - 8;91%
4-(1-hydroxyethyl)benzyl alcohol
80463-22-5

4-(1-hydroxyethyl)benzyl alcohol

(S)-repaglinide
135062-02-1

(S)-repaglinide

repaglinide 4-[1-(hydroxyethyl)]benzoate

repaglinide 4-[1-(hydroxyethyl)]benzoate

Conditions
ConditionsYield
With dmap; dicyclohexyl-carbodiimide In dichloromethane at 20℃;90%
1-(3-(hydroxymethyl)phenyl)ethan-1-ol
1013027-15-0

1-(3-(hydroxymethyl)phenyl)ethan-1-ol

(S)-repaglinide
135062-02-1

(S)-repaglinide

repaglinide 3-[1-(hydroxyethyl)]benzoate

repaglinide 3-[1-(hydroxyethyl)]benzoate

Conditions
ConditionsYield
With dmap; dicyclohexyl-carbodiimide In dichloromethane at 20℃;90%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

benzaldehyde
100-52-7

benzaldehyde

1-amino-3-methylbenzene
108-44-1

1-amino-3-methylbenzene

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(1-(4-cyanophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(1-(4-cyanophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;87%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-chlorobenzaldehyde
104-88-1

4-chlorobenzaldehyde

aniline
62-53-3

aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(1-(4-chlorophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(1-(4-chlorophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;85%
(S)-repaglinide
135062-02-1

(S)-repaglinide

(S)-2-(3-ethoxy-4-formylphenyl)-N-(3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)acetamide

(S)-2-(3-ethoxy-4-formylphenyl)-N-(3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)acetamide

Conditions
ConditionsYield
With dipotassium hydrogenphosphate; fac-tris(2-phenylpyridinato-N,C2')iridium(III); tris-(trimethylsilyl)silane; dimethyl dicarbonate In acetonitrile at 20℃; for 24h; Schlenk technique; Inert atmosphere; Sealed tube; Irradiation;84%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-methyl-benzaldehyde
104-87-0

4-methyl-benzaldehyde

1-amino-3-methylbenzene
108-44-1

1-amino-3-methylbenzene

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(2-(cyclohexylamino)-2-oxo-1-p-tolylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-m-tolylbenzamide

N-(2-(cyclohexylamino)-2-oxo-1-p-tolylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-m-tolylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;83%
manganese(II) chloride tetrahydrate

manganese(II) chloride tetrahydrate

(S)-repaglinide
135062-02-1

(S)-repaglinide

C54H74MnN4O10*2H2O

C54H74MnN4O10*2H2O

Conditions
ConditionsYield
With sodium hydroxide In ethanol; water for 2h; pH=9;82%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-methyl-benzaldehyde
104-87-0

4-methyl-benzaldehyde

aniline
62-53-3

aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(2-(cyclohexylamino)-2-oxo-1-p-tolylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(2-(cyclohexylamino)-2-oxo-1-p-tolylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;82%
phosphonic acid diethyl ester
762-04-9

phosphonic acid diethyl ester

(S)-repaglinide
135062-02-1

(S)-repaglinide

diethyl (2-ethoxy-4-(2-((3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)amino)-2-oxoethyl)phenyl)phosphonate

diethyl (2-ethoxy-4-(2-((3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)amino)-2-oxoethyl)phenyl)phosphonate

Conditions
ConditionsYield
With palladium diacetate; 2,2-dimethylpropanoic anhydride; triethylamine; 1,4-di(diphenylphosphino)-butane In 1,4-dioxane at 160℃; for 15h; Inert atmosphere; Schlenk technique;80%
(S)-repaglinide
135062-02-1

(S)-repaglinide

C27H35(2)HN2O4

C27H35(2)HN2O4

Conditions
ConditionsYield
With 2C11H15O2(1-)*C10H14*Ru(2+); water-d2 In 1,4-dioxane at 100℃; for 16h;80%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-chloro-aniline
106-47-8

4-chloro-aniline

4-cyanobenzaldehyde
105-07-7

4-cyanobenzaldehyde

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(4-chlorophenyl)-N-(1-(4-cyanophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)benzamide

N-(4-chlorophenyl)-N-(1-(4-cyanophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)benzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;80%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

benzaldehyde
100-52-7

benzaldehyde

aniline
62-53-3

aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(2-(cyclohexylamino)-2-oxo-1-phenylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(2-(cyclohexylamino)-2-oxo-1-phenylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;78%
(S)-repaglinide
135062-02-1

(S)-repaglinide

phenol
108-95-2

phenol

(S)-phenyl 4-(2-((1-(2-cyclohexylphenyl)-3-methylbutyl)amino)-2-oxoethyl)-2-ethoxybenzoate

(S)-phenyl 4-(2-((1-(2-cyclohexylphenyl)-3-methylbutyl)amino)-2-oxoethyl)-2-ethoxybenzoate

Conditions
ConditionsYield
With dmap; 1-ethyl-(3-(3-dimethylamino)propyl)-carbodiimide hydrochloride In tetrahydrofuran at 50℃; Inert atmosphere;77%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-nitrobenzaldehdye
555-16-8

4-nitrobenzaldehdye

aniline
62-53-3

aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(2-(cyclohexylamino)-1-(4-nitrophenyl)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(2-(cyclohexylamino)-1-(4-nitrophenyl)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;77%
(S)-1-(1-(4-isobutylphenyl)ethyl)cyclopropan-1-ol

(S)-1-(1-(4-isobutylphenyl)ethyl)cyclopropan-1-ol

(S)-repaglinide
135062-02-1

(S)-repaglinide

2-(7-ethoxy-3-((S)-3-(4-isobutylphenyl)-2-oxobutyl)-1-oxo-1,3-dihydroisobenzofuran-5-yl)-N-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)acetamide

2-(7-ethoxy-3-((S)-3-(4-isobutylphenyl)-2-oxobutyl)-1-oxo-1,3-dihydroisobenzofuran-5-yl)-N-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butyl)acetamide

Conditions
ConditionsYield
With potassium phosphate; dichloro(pentamethylcyclopentadienyl)rhodium (III) dimer; silver(I) acetate In acetonitrile at 80℃; for 24h; Sealed tube; Molecular sieve;77%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-methyl-benzaldehyde
104-87-0

4-methyl-benzaldehyde

4-chloro-aniline
106-47-8

4-chloro-aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(4-chlorophenyl)-N-(2-(cyclohexylamino)-2-oxo-1-p-tolylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)benzamide

N-(4-chlorophenyl)-N-(2-(cyclohexylamino)-2-oxo-1-p-tolylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)benzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;76%
ethanethiol
75-08-1

ethanethiol

(S)-repaglinide
135062-02-1

(S)-repaglinide

repaglinide S-ethyl thioester

repaglinide S-ethyl thioester

Conditions
ConditionsYield
With dmap; 1-ethyl-(3-(3-dimethylamino)propyl)-carbodiimide hydrochloride In dichloromethane at 20℃; for 5h; Inert atmosphere;75%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

aniline
62-53-3

aniline

4-cyanobenzaldehyde
105-07-7

4-cyanobenzaldehyde

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(1-(4-cyanophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(1-(4-cyanophenyl)-2-(cyclohexylamino)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;75%
water
7732-18-5

water

zinc(II) chloride
7646-85-7

zinc(II) chloride

(S)-repaglinide
135062-02-1

(S)-repaglinide

C54H74N4O10Zn*H2O

C54H74N4O10Zn*H2O

Conditions
ConditionsYield
With sodium hydroxide In ethanol for 3h; pH=8;74%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

4-methoxy-benzaldehyde
123-11-5

4-methoxy-benzaldehyde

aniline
62-53-3

aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(2-(cyclohexylamino)-1-(4-methoxyphenyl)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(2-(cyclohexylamino)-1-(4-methoxyphenyl)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;74%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

benzaldehyde
100-52-7

benzaldehyde

4-chloro-aniline
106-47-8

4-chloro-aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(4-chlorophenyl)-N-(2-(cyclohexylamino)-2-oxo-1-phenylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)benzamide

N-(4-chlorophenyl)-N-(2-(cyclohexylamino)-2-oxo-1-phenylethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)benzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;73%
Cyclohexyl isocyanide
931-53-3

Cyclohexyl isocyanide

3-nitro-benzaldehyde
99-61-6

3-nitro-benzaldehyde

aniline
62-53-3

aniline

(S)-repaglinide
135062-02-1

(S)-repaglinide

N-(2-(cyclohexylamino)-1-(3-nitrophenyl)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

N-(2-(cyclohexylamino)-1-(3-nitrophenyl)-2-oxoethyl)-2-ethoxy-4-(2-((S)-3-methyl-1-(2-(piperidin-1-yl)phenyl)butylamino)-2-oxoethyl)-N-phenylbenzamide

Conditions
ConditionsYield
In methanol at 20℃; for 6h; Ugi Condensation;72%

135062-02-1Downstream Products

135062-02-1Related news

Characteristics of Repaglinide (cas 135062-02-1) effects on insulin secretion08/09/2019

The dynamics of insulin secretion stimulated by repaglinide, a glinide, and the combinatorial effects of repaglinide and incretin were investigated. At 4.4 mM glucose, repaglinide induced insulin secretion with a gradually increasing first phase, showing different dynamics from that induced by g...detailed

The Structural Basis for the Binding of Repaglinide (cas 135062-02-1) to the Pancreatic KATP Channel08/08/2019

SummaryRepaglinide (RPG) is a short-acting insulin secretagogue widely prescribed for the treatment of type 2 diabetes. It boosts insulin secretion by inhibiting the pancreatic ATP-sensitive potassium channel (KATP). However, the mechanisms by which RPG binds to the KATP channel are poorly under...detailed

135062-02-1Relevant articles and documents

A validated chiral LC method for the enantiomeric separation of repaglinide on immobilized amylose based stationary phase

Patil, Kiran,Rane, Vipul,Yeole, Ravindra,Shinde, Devanand

, p. 1048 - 1053 (2012)

A simple, rapid, isocratic, normal phase chiral HPLC method was developed and validated for the enantiomeric separation of repaglinide, (S)-(+)-2-ethoxy-4-N [1-(2-piperidinophenyl)-3-methyl-1-butyl] aminocarbonylmethyl] benzoic acid, an antidiabetic drug substance. The enantiomers of repaglinide were resolved on a Chiralpak IA (immobilized amylose based stationary phase) column using a mobile phase consisting of n-hexane: ethanol: trifluoroacetic acid (80:20:0.2, v/v/v) at a flow rate of 1.0 mL min-1. The resolution between both enantiomers was greater than 2 in the optimized method. The developed method was extensively validated and proved to be robust, enantioselective, accurate, precise, and suitable for quantitative determination of (R)-enantiomer in bulk drug substance and product.

Synthesis method of repaglinide

-

, (2019/07/16)

The invention discloses a synthesis method of repaglinide, and belongs to the technical field of medicine synthesis. The method comprises the following steps that ortho-halogenated benzaldehyde is taken as a raw material, a 2-piperidine-1-benzaldehyde compound 1 is obtained through piperidine substitution and reacts with (R)-methylpropane-2-sulfinamide to obtain an imine compound 2, then the iminecompound 2 reacts with a 2-methyl-1-propylene Grignard reagent lithium chloride, and through reduction, an S-(+)-1-(2-piperidine phenyl)-3-methyl n-butylamine compound 3 is obtained; then the S-(+)-1-(2-piperidine phenyl)-3-methyl n-butylamine compound 3 and 4-carboxyl methyl-2-ethoxy benzoate are condensed to obtain an S-(+)-2-oxethyl-4-[N-{1-(2-piperidine phenyl)-3-methyl-1-butyl}amine carbonylmethyl]benzoate compound 4; finally, the repaglinide 5 is obtained through hydrolysis. Compared with other technologies, the synthesis method has the advantages that operation is simple, the raw materials are easy to obtain, the yield is high, the cost is low, and the method is environmentally friendly; the product repaglinide has very high optical purity and is suitable for industrial production.

Repaglinide Substantially Free of Dimer Impurity

-

Page/Page column 13-14, (2010/08/08)

The present invention provides highly pure repaglinide substantially free of dimer impurity, and process for the preparation thereof. The present invention also relates to 2-ethoxy-N-[(1S)-3-methyl-1-[2-(1-piperidinyl)phenyl]butyl]-4-[2-[[(1S)-3-methyl-1-[2-(1-piperidinyl)phenyl]butyl]amino]-2-oxoethyl]benzamide, an impurity of repaglinide, and a process for preparing and isolating thereof. The present invention further relates to pharmaceutical compositions comprising solid particles of pure repaglinide substantially free of dimer impurity or pharmaceutically acceptable salts thereof, wherein 90 volume-percent of the particles (D90) have a size of less than about 400 microns. The present invention also provides an optical resolution method of racemic 3-methyl-1-(2-piperidino-phenyl)-1-butylamine and use thereof for the preparation of repaglinide.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 135062-02-1