Welcome to LookChem.com Sign In|Join Free

CAS

  • or

1468-28-6

Post Buying Request

1468-28-6 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

1468-28-6 Usage

Synthesis Reference(s)

Synthesis, p. 474, 1983 DOI: 10.1055/s-1983-30388

Check Digit Verification of cas no

The CAS Registry Mumber 1468-28-6 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 1,4,6 and 8 respectively; the second part has 2 digits, 2 and 8 respectively.
Calculate Digit Verification of CAS Registry Number 1468-28:
(6*1)+(5*4)+(4*6)+(3*8)+(2*2)+(1*8)=86
86 % 10 = 6
So 1468-28-6 is a valid CAS Registry Number.
InChI:InChI=1/C11H13NO2/c13-11(10-4-2-1-3-5-10)12-6-8-14-9-7-12/h1-5H,6-9H2

1468-28-6SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 18, 2017

Revision Date: Aug 18, 2017

1.Identification

1.1 GHS Product identifier

Product name morpholin-4-yl(phenyl)methanone

1.2 Other means of identification

Product number -
Other names Benzomorpholide

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:1468-28-6 SDS

1468-28-6Synthetic route

morpholine
110-91-8

morpholine

3-Benzoyl-thiazolidin-(2Z)-ylidene-cyanamide

3-Benzoyl-thiazolidin-(2Z)-ylidene-cyanamide

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In dichloromethane for 0.5h; Ambient temperature;100%
morpholine
110-91-8

morpholine

benzoyl chloride
98-88-4

benzoyl chloride

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With pyridine In dichloromethane at 0 - 20℃;99%
With triethylamine In dichloromethane at 20℃; Inert atmosphere;99%
With Fe3O4-supported (diisopropylamino)acetamide In dichloromethane at 25℃;98%
morpholine
110-91-8

morpholine

benzoic acid methyl ester
93-58-3

benzoic acid methyl ester

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
Stage #1: morpholine With samarium(III) chloride; lithium hexamethyldisilazane In tetrahydrofuran at 20℃; for 0.25h;
Stage #2: benzoic acid methyl ester In tetrahydrofuran at 0℃;
99%
With 14C2H2F3O(1-)*6C4H8O*La2Na8(14+) at 80℃; for 6h; Inert atmosphere;99%
With [(DABCO)(AlMe3)2] In tetrahydrofuran at 130℃; for 0.0833333h; microwave irradiation;98%
morpholine
110-91-8

morpholine

iodobenzene
591-50-4

iodobenzene

carbon monoxide
201230-82-2

carbon monoxide

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With dipotassium hydrogenphosphate; palladium; potassium iodide In 1,4-dioxane at 130℃; under 3750.38 Torr; for 12h; Pressure; Autoclave; Green chemistry;99%
With potassium carbonate In toluene at 120℃; for 8h;98%
With triethylamine In toluene at 100℃; under 3750.38 Torr; for 8h; Inert atmosphere;93%
morpholine
110-91-8

morpholine

C14H15N2O(1+)*I(1-)

C14H15N2O(1+)*I(1-)

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With N-ethyl-N,N-diisopropylamine In dichloromethane at 20℃; for 2h;99%
morpholine
110-91-8

morpholine

Merrifield resin-O-(CH2)4-S-4-benzoyloxy-6-methylpirimidin-2-yl

Merrifield resin-O-(CH2)4-S-4-benzoyloxy-6-methylpirimidin-2-yl

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In dichloromethane at 20℃; for 48h;98%
morpholine
110-91-8

morpholine

2,4,6-trichlorophenyl benzoate
24003-11-0

2,4,6-trichlorophenyl benzoate

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With dmap; triethylamine In tetrahydrofuran at 45℃; for 13h; Inert atmosphere;98%
morpholin hydrochloride
10024-89-2

morpholin hydrochloride

benzyl alcohol
100-51-6

benzyl alcohol

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With tert.-butylhydroperoxide; calcium carbonate In water; acetonitrile at 80℃; for 4h;98%
With tert.-butylhydroperoxide In water; acetonitrile at 80℃; for 8h; Catalytic behavior; Reagent/catalyst; Inert atmosphere;93%
With tert.-butylhydroperoxide; (PhGeO2)12Cu2Fe5(O)OH(PhGe)2O5(2,2'-bipyridine)2; calcium carbonate In nonane; acetonitrile at 80℃; for 24h; Catalytic behavior; Sealed tube;82%
morpholine
110-91-8

morpholine

1-(benzoyl)piperidine-2,6-dione

1-(benzoyl)piperidine-2,6-dione

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In acetonitrile at 20℃; for 15h; Inert atmosphere; Schlenk technique;98%
With triethylamine In dichloromethane at 23℃; for 15h; Inert atmosphere; Schlenk technique;95%
morpholine
110-91-8

morpholine

1-benzoyl-4,4-dimethylpiperidine-2,6-dione

1-benzoyl-4,4-dimethylpiperidine-2,6-dione

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In acetonitrile at 20℃; for 15h; Inert atmosphere; Schlenk technique;98%
morpholine
110-91-8

morpholine

3-benzoyl-3-azaspiro[5.5]undecane-2,4-dione

3-benzoyl-3-azaspiro[5.5]undecane-2,4-dione

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In acetonitrile at 20℃; for 15h; Inert atmosphere; Schlenk technique;98%
morpholine
110-91-8

morpholine

1-benzoyl-4-phenylpiperidine-2,6-dione

1-benzoyl-4-phenylpiperidine-2,6-dione

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In acetonitrile at 20℃; for 15h; Inert atmosphere; Schlenk technique;98%
morpholine
110-91-8

morpholine

2-benzoyl-1H-benzo[de]isoquinoline-1,3(2H)-dione

2-benzoyl-1H-benzo[de]isoquinoline-1,3(2H)-dione

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In acetonitrile at 20℃; for 15h; Inert atmosphere; Schlenk technique;98%
morpholine
110-91-8

morpholine

8-benzoyl-8-azaspiro[4.5]decane-7,9-dione

8-benzoyl-8-azaspiro[4.5]decane-7,9-dione

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In acetonitrile at 20℃; for 15h; Inert atmosphere; Schlenk technique;98%
morpholine
110-91-8

morpholine

bromobenzene
108-86-1

bromobenzene

carboxy MIDA boronate

carboxy MIDA boronate

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
Stage #1: carboxy MIDA boronate In 1,4-dioxane at 80℃; Sealed tube; Inert atmosphere;
Stage #2: morpholine; bromobenzene With triethylamine; triphenylphosphine; bis(dibenzylideneacetone)-palladium(0) In 1,4-dioxane at 80℃; for 18h; Sealed tube; Inert atmosphere;
98%
morpholine
110-91-8

morpholine

benzaldehyde
100-52-7

benzaldehyde

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With bis(1,5-cyclooctadiene)nickel (0); 2,2,2-Trifluoroacetophenone; 1,3-di-tert-butylimidazol-2-ylidene In 1,4-dioxane at 40℃; for 8h; Inert atmosphere; Glovebox;97%
With tert.-butylhydroperoxide; copper(l) chloride In water at 100℃; for 1h; Sealed tube; Inert atmosphere; Green chemistry;96%
With sulfuric acid; dihydrogen peroxide; sodium bromide In 1,4-dioxane; water at 80℃; for 0.416667h; Catalytic behavior; Flow reactor; Green chemistry;96%
4-(trimethylsilyl)morpholine
13368-42-8

4-(trimethylsilyl)morpholine

benzoyl fluoride
455-32-3

benzoyl fluoride

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
tetrabutyl ammonium fluoride In acetonitrile for 6h; Ambient temperature;97%
morpholine
110-91-8

morpholine

N-benzoyl-N-benzyl-4-methylbenzenesulfonamide

N-benzoyl-N-benzyl-4-methylbenzenesulfonamide

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In ethanol at 45℃; Solvent; Sealed tube; chemoselective reaction;97%
borane morpholine complex
4856-95-5

borane morpholine complex

benzoic acid
65-85-0

benzoic acid

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In 5,5-dimethyl-1,3-cyclohexadiene for 12h; Reflux;97%
morpholine
110-91-8

morpholine

microgel-supported-PhCO

microgel-supported-PhCO

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
In tetrahydrofuran at 25℃; for 14h; Inert atmosphere;96.7%
morpholine
110-91-8

morpholine

benzoic acid
65-85-0

benzoic acid

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With tetramethylorthosilicate In toluene at 110℃; for 17h; Inert atmosphere;96%
With pyridine; diphenyl hydrogen phosphate at 0 - 20℃;95%
With nickel ferrite nanoparticle In neat (no solvent) for 0.166667h; Irradiation; Sealed tube;95%
morpholine
110-91-8

morpholine

benzoic acid ethyl ester
93-89-0

benzoic acid ethyl ester

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
Stage #1: morpholine With diisobutylaluminium hydride In tetrahydrofuran; hexane at 0℃; for 3h; Inert atmosphere;
Stage #2: benzoic acid ethyl ester In tetrahydrofuran; hexane at 0℃; for 0.166667h; Inert atmosphere;
96%
Stage #1: morpholine With n-butyllithium; phenylacetylene In tetrahydrofuran; hexane at -78℃;
Stage #2: benzoic acid ethyl ester In tetrahydrofuran; hexane at -78℃; Further stages.;
91%
With graphene oxide In neat (no solvent) at 100℃; for 24h; Sealed tube;69%
morpholine
110-91-8

morpholine

benzoic acid hydrazide
613-94-5

benzoic acid hydrazide

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With 1,8-diazabicyclo[5.4.0]undec-7-ene; copper dichloride In tetrahydrofuran95%
With mercury(II) oxide In benzene for 0.5h;68%
With tert.-butylhydroperoxide; iron(III) chloride In ethanol at 70℃;63%
Thiobenzmorpholid
2032-36-2

Thiobenzmorpholid

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With P,P-dichlorophenylphosphine oxide In acetonitrile at -4℃; for 5h;95%
With tert-butylhypochlorite In tetrachloromethane at 40℃; for 1h;94%
With hydrogenchloride; N-nitrosopiperidine; potassium iodide In dichloromethane; water at 22℃; for 17h;92%
morpholine
110-91-8

morpholine

1-benzoylimidazole
10364-94-0

1-benzoylimidazole

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With Imidazole hydrochloride In water at 20℃; for 0.166667h;95%
With 1H-imidazole; carbon dioxide In tetrahydrofuran at 45℃;
benzoic acid
65-85-0

benzoic acid

3-methyl-1-(morpholin-4-ylcarbonyl)-1H-imidazol-3-ium iodide

3-methyl-1-(morpholin-4-ylcarbonyl)-1H-imidazol-3-ium iodide

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With triethylamine In acetonitrile at 20℃; for 16h;95%
morpholine
110-91-8

morpholine

benzylamine
100-46-9

benzylamine

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With tetraethylammonium chloride; molybdenum hexacarbonyl In 1,4-dioxane at 130℃; for 4h; Microwave irradiation;95%
With dihydrogen peroxide; potassium hydroxide In tetrahydrofuran at 25℃; for 5h; Temperature; Irradiation;
morpholine
110-91-8

morpholine

iodobenzene
591-50-4

iodobenzene

molybdenum hexacarbonyl
13939-06-5, 199620-15-0

molybdenum hexacarbonyl

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With tributyl-amine In toluene at 80℃; for 1h; Catalytic behavior; Solvent; Temperature; Reagent/catalyst;95%
morpholine
110-91-8

morpholine

N-methyl-N-phenyl-benzamide
1934-92-5

N-methyl-N-phenyl-benzamide

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With lithium hexamethyldisilazane In tetrahydrofuran; toluene at 23℃; for 15h; Inert atmosphere; chemoselective reaction;95%
morpholine
110-91-8

morpholine

benzyl alcohol
100-51-6

benzyl alcohol

4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

Conditions
ConditionsYield
With 1.9 mol% Au/HT; potassium tert-butylate In o-xylene at 90℃; for 24h; Inert atmosphere;94%
Stage #1: benzyl alcohol With sulfuric acid; dihydrogen peroxide; sodium bromide In 1,4-dioxane; water at 70℃;
Stage #2: morpholine With tert.-butylhydroperoxide In 1,4-dioxane at 80℃; for 0.166667h; Reagent/catalyst; Temperature;
94%
With C49H41N4O2P2RuS(1+)*NO3(1-); potassium tert-butylate In toluene at 120℃; for 12h; Green chemistry;92%
4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

4-benzyl-morpholine
10316-00-4

4-benzyl-morpholine

Conditions
ConditionsYield
With diethylzinc; lithium chloride In tetrahydrofuran; hexane at 20℃; for 24h; Catalytic behavior; Inert atmosphere; chemoselective reaction;98%
With C25H42N6Rh(1+)*F6Sb(1-); phenylsilane In neat (no solvent) at 30℃; for 20h; Glovebox; Inert atmosphere; Sealed tube;96%
With triethylsilane; indium(III) bromide In chloroform at 60℃; for 20h; Inert atmosphere;94%
4-benzoylmorpholine
1468-28-6

4-benzoylmorpholine

N,N-dimethylthioformamide
758-16-7

N,N-dimethylthioformamide

N,N-dimethyl-2-oxo-2-phenylethanethioamide
40531-91-7

N,N-dimethyl-2-oxo-2-phenylethanethioamide

Conditions
ConditionsYield
With lithium diisopropyl amide In tetrahydrofuran at 25℃; for 0.0133333h;98%

1468-28-6Relevant articles and documents

Loss of benzaldehyde in the fragmentation of protonated benzoylamines: Benzoyl cation as a hydride acceptor in the gas phase

Chai, Yunfeng,Shao, Yunlong,Wang, Lu,Wang, Lin

, p. 664 - 671 (2017)

In electrospray ionization tandem mass spectrometry of protonated 1-benzoylamines (1-benzoylpiperadine, 1-benzoylmorpholine, and 1-benzoyl-4-methylpiperazine), the dominant fragmentation pathway was amide bond cleavage to form benzoyl cation and neutral amine. Meanwhile, in their fragmentations, an interesting loss of benzaldehyde (106?Da) was observed and identified to derive from hydride transfer reaction between the benzoyl cation and amine. A stepwise mechanism for loss of 106?Da (benzene and CO) could be excluded with the aid of deuterium labeling experiment. Theoretical calculations indicated that hydride transfers from amines (piperadine, morpholine, and 1-methylpiperazine) to benzoyl cation were thermodynamically permitted, and 1-methylpiperazine was the best hydride donor among the 3 amines. The mass spectrometric experimental results were consistent with the computational results. The relative abundance of the iminium cation (relative to the benzoyl cation) in the fragmentation of protonated 1-benzoyl-4-methylpiperazine was higher than that in the fragmentation of the other 2 protonated 1-benzoylamines. By comparing the fragmentations of protonated 1-benzyl-4-methylpiperazine and protonated 1-benzoyl-4-methylpiperazine and the energetics of their hydride transfer reactions, this study revealed that benzoyl cation was a hydride acceptor in the gas phase, but which was weaker than benzyl cation.

Synthesis of tertiary benzamides via Pd-catalyzed coupling of arylboronic esters and carbamoyl chlorides

Lysen, Morten,Kelleher, Susan,Begtrup, Mikael,Kristensen, Jesper Langgaard

, p. 5342 - 5343 (2005)

Ortho-substituted arylboronic esters are efficiently coupled with carbamoyl chlorides under Pd-catalysis to give tertiary benzamides.

Silica nanosphere-supported palladium(II) furfural complex as a highly efficient and recyclable catalyst for oxidative amination of aldehydes

Sharma,Sharma, Shivani

, p. 1292 - 1304 (2014)

The present work reports the fabrication of a novel and highly efficient silica nanospheres-based palladium catalyst (SiO2@APTES@Pd-FFR) via immobilization of a palladium complex onto silica nanospheres functionalized with 3-aminopropyltriethoxysilane (APTES), and its catalytic application for the oxidative amination of aldehydes to yield commercially important amides. The structure of the nano-catalyst was confirmed by Solid-state 13C CPMAS and 29Si CPMAS NMR spectroscopy, Brunauer-Emmett-Teller (BET) surface area analysis, Fourier transform infrared spectroscopy (FT-IR), Energy dispersive X-ray fluorescence spectroscopy (ED-XRF), Atomic absorption spectroscopy (AAS), Transmission electron microscopy (TEM) and elemental analysis. The nano-catalyst was found to be highly effective for the oxidative amination of aldehydes using hydrogen peroxide as an environmentally benign oxidant to give amides. The effect of various reaction parameters such as temperature, amount of catalyst, reaction time, type of solvent, oxidant used, substrate to oxidant ratio etc. have been demonstrated to achieve high catalytic efficacy. Moreover, this nanostructured catalyst could be recovered with simplicity and reused for several cycles without any significant loss in its catalytic activity. In addition, the stability of the reused nano-catalyst was proved by FT-IR and HRTEM techniques. It is worth noting that the features of mild reaction conditions, simple work-up procedure, high product yield, no use of toxic organic solvents, high turn-over frequency (TOF), and easy recovery and reusability of the present quasi-homogeneous nano-catalyst make this protocol an attractive alternative to the existing catalytic methods for the oxidative amination of aldehydes to furnish industrially important amides. The Royal Society of Chemistry 2014.

Development of palladium catalysts immobilized on supported phosphonium ionic liquid phases

Urbán, Béla,Skoda-F?ldes, Rita

, p. 302 - 306 (2019)

The application of heterogeneous palladium catalysts supported on phosphonium ion modified silica was investigated in aminocarbonylation reactions of aryl iodides. In contrast to catalysts immobilized on supports decorated with imidazolium ions, the application of phosphonium type supported ionic liquid phases made it possible to carry out double carbonylation with good selectivity in apolar toluene which led to a considerable decrease in the amount of leached palladium. An even better stabilization of the palladium catalyst could be achieved by introducing dicationic organic moieties incorporating both imidazolium and phosphonium ions on the surface of the support. At the same time, the former catalyst, obtained from the supported phosphonium ionic liquid phase was found to be superior in monocarbonylations. The amide products were obtained in good yields by the proper choice of the reaction conditions, such as reaction temperature and pressure and that of the base.

N-BENZOYL O,O-DIALKYL PHOSPHORANILIDATES: REACTION WITH O- AND N-NUCLEOPHILES

Baraniak, Janina,Stec, Wojciech J.

, p. 4193 - 4196 (1991)

Solvolysis of mixed phosphoric-carboxylic N-phenylimides occurs with exclusive attack of nucleophiles at the carbonyl carbon centre and is accompanied by phosphoryl N->O migration.

Acylation of piperidine and morpholine with phenyl benzoates in the mixtures water-2-propanol and water-dioxane

Kochetova,Kalinina,Kuritsyn,Kustova

, p. 1416 - 1423 (2015)

Kinetics of acylation of piperidine and morpholine with 4-nitro- and 2,6-dinitrophenyl benzoates was studied in binary systems water-2-propanol and water-dioxane. Structural and energy characteristics of solvate complexes of morpholine and piperidine with the components of the mixed solvents were calculated. Kinetic regularities of acylation are considered from the viewpoint of specific solvation of amines.

Pd-PEPPSI: A general Pd-NHC precatalyst for Buchwald-Hartwig cross-coupling of esters and amides (transamidation) under the same reaction conditions

Shi, Shicheng,Szostak, Michal

, p. 10584 - 10587 (2017)

Amides are of fundamental interest in many fields of chemistry involving organic synthesis, chemical biology and biochemistry. Here, we report the first catalytic Buchwald-Hartwig coupling of both common esters and amides by highly selective C(acyl)-X (X = O, N) cleavage to rapidly access aryl amide functionality via a cross-coupling strategy. Reactions are promoted by versatile, easily prepared, well-defined Pd-PEPPSI type precatalysts, and proceed in good to excellent yields and with excellent chemoselectivity for the acyl bond cleavage. The method is user friendly because it employs commercially-available, moisture- and air-stable precatalysts. Notably, for the first time we demonstrate selective C(acyl)-N and C(acyl)-O cleavage/Buchwald-Hartwig amination under the same reaction conditions, which allows for streamlining amide synthesis by avoiding restriction to a particular acyl metal precursor. Of broad interest, this study opens the door to using a family of well-defined Pd(ii)-NHC precatalysts bearing pyridine "throw-away" ligands for the selective C(acyl)-amination of bench-stable carboxylic acid derivatives.

Ionic Complexes of Tetra- and Nonanuclear Cage Copper(II) Phenylsilsesquioxanes: Synthesis and High Activity in Oxidative Catalysis

Bilyachenko, Alexey N.,Kulakova, Alena N.,Levitsky, Mikhail M.,Korlyukov, Alexander A.,Khrustalev, Victor N.,Vologzhanina, Anna V.,Titov, Aleksei A.,Dorovatovskii, Pavel V.,Shul'pina, Lidia S.,Lamaty, Frédéric,Bantreil, Xavier,Villemejeanne, Beno?t,Ruiz, Cindy,Martinez, Jean,Shubina, Elena S.,Shul'pin, Georgiy B.

, p. 4437 - 4447 (2017)

Herein, we describe an approach to cage metallasilsesquioxanes by self-assembly with 1,2-bis(diphenylphosphino)ethane as a key reactant. This approach allowed us to achieve a unique family of complexes that includes anionic tetra- and nonanuclear cage copper(II) sodium silsesquioxane and cationic copper(I) 1,2-bis(diphenylphosphino)ethane components. Additional representatives of this intriguing metallasilsesquioxane family (Cu9Na6 and Cu9Na3Cs3) were obtained through the replacement of the original ethanol-based reaction medium by DMSO. The fascinating structural peculiarities of all products were established by using XRD and topological studies. Initial tests for the application of the synthesized complexes as catalysts revealed their very high activity in the homogeneous oxidation of alkanes and alcohols to produce alkyl hydroperoxides, ketones, and amides.

Iron-Catalyzed Amide Formation from the Dehydrogenative Coupling of Alcohols and Secondary Amines

Lane, Elizabeth M.,Uttley, Katherine B.,Hazari, Nilay,Bernskoetter, Wesley

, p. 2020 - 2025 (2017)

The five-coordinate iron(II) hydride complex (iPrPNP)Fe(H)(CO) (iPrPNP = N[CH2CH2(PiPr2)]2) selectively catalyzes the dehydrogenative intermolecular coupling of alcohols and secondary amines to form tertiary amides. This is the most productive base-metal catalyst for dehydrogenative amidation reported to date, in some cases achieving up to 600 turnovers. The catalyst works well for sterically undemanding amines and alcohols or cyclic substrates and is particularly effective in the synthesis of formamides from methanol. However, the catalyst performance declines rapidly with the incorporation of large substituents on the amine or alcohol substrate. Variable-temperature NMR spectroscopic studies suggest that the catalyst resting state is an off-cycle iron(II) methoxide species, (iPrPN(H)P)Fe(H)(OCH3)(CO), resulting from addition of methanol across the Fe-N bond of (iPrPNP)Fe(H)(CO). This reversibly formed iron(II) methoxide complex is favored at mild temperatures but eliminates methanol upon heating.

TBAI-catalyzed C–N bond formation through oxidative coupling of benzyl bromides with amines: a new avenue to the synthesis of amides

Kumar, Dhirendra,Maury, Suresh Kumar,Kumari, Savita,Kamal, Arsala,Singh, Himanshu Kumar,Singh, Sundaram,Srivastava, Vandana

supporting information, p. 424 - 432 (2022/02/09)

A new green approach for the synthesis of amide through TBAI-catalyzed oxidative coupling of benzyl bromides with amine was developed in the presence of tert-butyl hydroperoxide (TBHP) as an oxidant. Various electron-donating and withdrawing groups containing benzyl bromides and various amines, were subjected to the reaction and transformed to the corresponding amide in good to excellent yields.

Remarkably Efficient Iridium Catalysts for Directed C(sp2)-H and C(sp3)-H Borylation of Diverse Classes of Substrates

Chattopadhyay, Buddhadeb,Hassan, Mirja Md Mahamudul,Hoque, Md Emdadul

supporting information, p. 5022 - 5037 (2021/05/04)

Here we describe the discovery of a new class of C-H borylation catalysts and their use for regioselective C-H borylation of aromatic, heteroaromatic, and aliphatic systems. The new catalysts have Ir-C(thienyl) or Ir-C(furyl) anionic ligands instead of the diamine-type neutral chelating ligands used in the standard C-H borylation conditions. It is reported that the employment of these newly discovered catalysts show excellent reactivity and ortho-selectivity for diverse classes of aromatic substrates with high isolated yields. Moreover, the catalysts proved to be efficient for a wide number of aliphatic substrates for selective C(sp3)-H bond borylations. Heterocyclic molecules are selectively borylated using the inherently elevated reactivity of the C-H bonds. A number of late-stage C-H functionalization have been described using the same catalysts. Furthermore, we show that one of the catalysts could be used even in open air for the C(sp2)-H and C(sp3)-H borylations enabling the method more general. Preliminary mechanistic studies suggest that the active catalytic intermediate is the Ir(bis)boryl complex, and the attached ligand acts as bidentate ligand. Collectively, this study underlines the discovery of new class of C-H borylation catalysts that should find wide application in the context of C-H functionalization chemistry.

Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex

Bera, Jitendra K.,Pandey, Pragati

supporting information, p. 9204 - 9207 (2021/09/20)

A terminal [Ni-OH] complex1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst1is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of1towards amide reduction follows an inverse trend,i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 1468-28-6