301-04-2 Usage
Physical Properties
Lead(II) acetate, Pb(CH3COO)2, is a white crystalline material with a sweet taste and is also classified by one of the following trivial names: lead sugar, Saturn salt and Goulard powder, respectively. Lead acetate is water and glycerin soluble, and is toxic (like most lead compounds).The anhydrous salt is a white crystalline solid; very sweet taste; density 3.25 g/cm3 at 20°C; melts at 280°C; very soluble in cold water (44.39g/100g at 20°C); solubility is much greater in hot water (221g/100g at 50°C; also soluble in alcohols.The trihydrate is a colorless monoclinic crystal or white granule or powder; refractive index 1.567 (along the beta axis); faint vinegar odor; intense sweet taste and then metallic after-taste; slowly effloresces; density 2.55 g/cm3; melts at 75°C upon rapid heating; loses some of its water of crystallization on heating which dissolves in it; decomposes at 200°C; highly soluble in water (45.61g/100g at 15°C and 200g/100g at 100°C); insoluble in alcohol.The decahydrate is white rhombic crystal; density 1.69 g/cm3; melts at 22°C; soluble in water but insoluble in alcohol.
Uses
Different sources of media describe the Uses of 301-04-2 differently. You can refer to the following data:
1. Lead (II) acetate, as well as white lead, have been used in cosmetics throughout history, though this practice has ceased in Western countries . It is still used in men's hair coloring products like Grecian Formula.Lead acetate is used as a reagent to make other lead compounds and as a fixative for some dyes. In low concentrations, it is the principal active ingredient in progressive types of hair colouring dyes. These products are applied over a period of time to achieve a gradual coloring effect. Lead (Il) acetate is also used as a mordant in textile printing anddyeing,and as a drier in paints and varnishes.Lead (II) acetate paper is used to detect the poisonous gas hydrogen sulfide. The gas reacts with lead (II) acetate on the moistened test paper to form a grey precipitate of lead (II) sulfide.Lead (II) acetate solution was a commonly used folk remedy for sore nipples . In modern medicine, for a time, it was used as an astringent, in the form of Goulard's Extract.An aqueous solution of lead (II) acetate is the by product of the 50 / 50 mixture of hydrogen peroxide and white vinegar used in the cleaning and maintenance of stainless steel fire arm suppressors (silencers) and compensators. The solution is agitated by the bubbling action of the hydrogen peroxide, and the main reaction is the dissolution of lead deposits within the suppressor by the acetic acid, which forms lead acetate.https://www.chemeurope.com/https://pubchem.ncbi.nlm.nih.govMasterly's Series LAB MANUAL OF PHARMACEUTICS-I For Diploma Pharmacy First
2. Mordant in cotton dyes; lead coating for metals; drier in paints, varnishes and pigment inks; colorant in hair dyes. Weighting silks; manufacture of lead salts, chrome-yellow; as analytical reagent for detection of sulfide, determination of CrO3, MoO3.
3. 2 – 1 - Sweetener Like other lead (II) salts, lead (II) acetate has a sweet taste, which has led to its use as a sugar substitute throughout history. The ancient Romans, who had few sweeteners besides honey, would boil must (grape juice) in lead pots to produce a reduced sugar syrup called defrutum, concentrated again into sapa. This syrup was used to sweeten wine and to sweeten and preserve fruit. It is possible that lead(II) acetate or other lead compounds leaching into the syrup might have caused lead poisoning in anyone consuming it . Lead acetate is no longer used in the production of sweeteners in most of the world because of its recognized toxicity. Modern chemistry can easily detect it, which has all but stopped the illegal use that continued decades after legal use as a sweetener was banned . 2 – 1 - Sweetener2 – 1 – 1 - Resultant deaths Pope Clement II died in October 1047. A toxicologic examination of his remains conducted in the mid – 20 th century confirmed centuries-old rumors that he had been poisoned with lead sugar.It is not clear if he was assassinated. In 1787 painter Albert Christoph Dies swallowed, by accident, approximately 21 g of lead acetate. His recovery from this poison was slow and incomplete. He lived with illnesses until his death in 1822 . Although the use of lead (II) acetate as a sweetener was already illegal at that time, composer Ludwig van Beethoven may have died of lead poisoning caused by wines adulterated with lead acetate. Mary Seacole applied lead (II) acetate, among other remedies, against an epidemic of cholera in Panama.
Preparation
Lead acetate is prepared by dissolving lead monoxide in strong acetic acid:
PbO + 2CH3COOH → Pb(C2H4O2)2 + H2O
The trihydrate is obtained by dissolving lead monoxide in hot dilute acetic acid solution. Upon cooling, large crystals separate out.
Reactions
Exposure to carbon dioxide yields basic lead carbonate, 2PbCO3?Pb(OH)2, the composition of which may vary with reaction conditions.
Reactions with sulfuric acid, hydrochloric acid and hydriodic acid yield lead sulfate PbSO4, lead chloride PbCl2, and lead iodide PbI2, respectively.
Reaction with hydrogen sulfide forms black precipitate of lead sulfide, PbS. A paper soaked with lead acetate solution turns black on exposure to H2S, a test often used to detect sulfide.
Toxicity
Moderately toxic by intraperitoneal route and possibly by oral route.
LD50 intraperitoneal (mouse):400 mg/kg
Description
Lead
acetate is stable under ordinary conditions of use and storage. Lead acetate is incompatible
with bromates, phenol, chloral hydrate, sulphides, hydrogen peroxide, resorcinol,
salicylic acid, sulphites, vegetable infusions, alkalis, tannin, phosphates, citrates, chlorides,
carbonates, tartrates, and acids. Lead (II) acetate, as well as white lead, has been
used in cosmetics throughout history, though this practice has ceased in Western countries.
It is still used in men’s hair colouring. Lead (II) acetate paper is used to detect the
poisonous gas hydrogen sulphide. The gas reacts with lead (II) acetate on the moistened
test paper to form a grey precipitate of lead (II) sulphide.
Chemical Properties
Different sources of media describe the Chemical Properties of 301-04-2 differently. You can refer to the following data:
1. Lead acetate is a white, flaky crystalline substance with a slight odor of acetic acid. Commercial grades
may be powdered granules, or brown or gray lumps.
Diacetate: Powder.
2. Lead (II) acetate (Pb (CH3COO)2), also known as lead acetate, lead diacetate, plumbous acetate, sugar of lead, lead sugar, salt of Saturn, and Goulard's powder, is a white crystalline chemical compound with a sweetish taste. It is made by treating lead(II) oxide with acetic acid. Like other lead compounds, it is toxic. Lead acetate is soluble in water and glycerin. With water it forms the trihydrate, Pb(CH3COO)2·3H2O, a colorless or white efflorescent monoclinic crystalline substance. The substance is used as a reagent to make other lead compounds and as a fixative for some dyes. In low concentrations, it is the principal active ingredient in progressive types of hair coloring dyes.[citation needed] Lead(II) acetate is also used as a mordant in textile printing and dyeing, as a drier in paints and varnishes, and in preparing other lead compounds.
Definition
ChEBI: A lead coordination entity in which a central lead(2+) atom is coordinated to two acetate ions.
Production Methods
Lead acetate is made by dissolving lead monoxide (litharge) or lead carbonate in strong acetic acid. Several types of basic salts are formed when lead acetates are prepared from lead monoxide in dilute acetic acid or at high pH. The basic salts of lead acetate are white crystalline compounds, which are highly soluble in water and dissolve in ethyl alcohol.Lead acetate can be made by boiling elemental lead in acetic acid and hydrogen peroxide.
Flammability and Explosibility
Notclassified
Potential Exposure
Lead acetate is used as a color additive in hair dyes; as a mordant in cotton dyes, in the lead
coating of metals; as a drier in paints; varnishes and pigment inks; and in medicinals, such as astringents.
Incompatibilities: A strong reducing agent. Reacts violently
with strong oxidizers, bromates, strong acids; chemically
active metals; phosphates, carbonates, phenols. Contact
with strong acids forms acetic acid. Incompatible with
strong bases: ammonia, amines, cresols, isocyanates, alkylene oxides; epichlorohydrin, sulfites, resorcinol, salicylic
acid, and chloral hydrat
Shipping
UN1616 Lead acetate, Hazard Class: 6.1;
Labels: 6.1-Poisonous materials
Purification Methods
Crystallise it twice from anhydrous acetic acid and dry it under vacuum for 24hours at 100o. The solubility in H2O is 63% (at ~20o) and 200% (at boiling point). [Beilstein 2 IV 118.]
Incompatibilities
A strong reducing agent. Reacts violently
with strong oxidizers, bromates, strong acids; chemically
active metals; phosphates, carbonates, phenols. Contact
with strong acids forms acetic acid. Incompatible with
strong bases: ammonia, amines, cresols, isocyanates, alkylene oxides; epichlorohydrin, sulfites, resorcinol, salicylic
acid, and chloral hydrate
Waste Disposal
Convert to nitrate using nitric
acid; evaporate, then saturate with H2S; wash and dry
the sulfide and ship to the supplier. Consult with
environmental regulatory agencies for guidance on
acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with
EPA regulations governing storage, transportation, treatment, and waste disposal
Precautions
Lead (II) acetate, as with any other lead salts, causes lead poisoning.
Check Digit Verification of cas no
The CAS Registry Mumber 301-04-2 includes 6 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 3 digits, 3,0 and 1 respectively; the second part has 2 digits, 0 and 4 respectively.
Calculate Digit Verification of CAS Registry Number 301-04:
(5*3)+(4*0)+(3*1)+(2*0)+(1*4)=22
22 % 10 = 2
So 301-04-2 is a valid CAS Registry Number.
InChI:InChI=1/C2H4O2.Pb.2H/c1-2(3)4;;;/h1H3,(H,3,4);;;/rC2H4O2.H2Pb/c1-2(3)4;/h1H3,(H,3,4);1H2
301-04-2Relevant articles and documents
Papiernik, Renee,Hubert-Pfalzgraf, Liliane G.,Massiani, Marie C.
, p. 1657 - 1662 (1991)
Synthesis and characterization of the heterometallic aggregate Pb2Al5(μ3-O)(μ4-O)(μ-OiPr)9(OiPr)3(μ-OAc)3
Pandey, Ashutosh,Gupta, Vishnu D.,N?th, Heinrich
, p. 1291 - 1293 (1999)
A novel heterometallic aggregate Pb2Al5(μ3-O)(μ4-O)(μ- OiPr)9(OiPr)3(μ-OAc)3 obtained from the interaction of Pb(OAc)2 and Al(O-iPr)3 is the first structurally characterized example based on lead and aluminum. This compound has been isolated in high yield and examined by 1H-, 13C-, and 27Al NMR, and in the solid state by X-ray crystallography.
Syntheses of needle-shaped layered perovskite (C6H5CH2NH3)2PbI4bundles via a two-step processing technique
Ma, Dewei,He, Yidan
, p. 1213 - 1219 (2017)
Similar to the three-dimensional perovskites, two-dimensional (2D) layered lead halide perovskites constitute a particular class of semiconductor materials in the family of perovskites. This article reports syntheses of needle-like bundles of 2D perovskite (C6H5CH2NH3)2PbI4by a two-step processing technique. The concentration of C6H5CH2NH3I precursor has a great influence on the product, structural and compositional analyses prove the phase and stoichiometry of 2D perovskite (C6H5CH2NH3)2PbI4with high crystallinity for the needle bundles synthesized with concentration of C6H5CH2NH3I higher than 25 mg/mL. Intensive studies on the growth mechanism of the products were carried out; we believe the involvement of C6H5CH2NH3+group determines the layered structure and the final morphology of the products. Photoluminescence measurement show that the needles possess a band-edge emission peak centering around 540 nm and a narrow full width at half maximum of about 30 nm.
Benson, D.,Sutcliffe, L. H.
, p. 246 - 254 (1960)
Synthesis, structure, and properties of solid solutions based on bismuth ferrite
Korchagina,Ivanov,Proidakova, V. Yu.,Rush,Rybakova,Sadovskaya
, p. 568 - 573 (2009/09/24)
Solid solutions of Bi1 - x Pb x Fe1 - x Zr x O3 (x = 0.1-0.2) are synthesized by the methods of liquid-phase and modified solid-phase synthesis. Also, solid solutions of [Bi0.9(Pb0.9/
