Welcome to LookChem.com Sign In|Join Free

CAS

  • or

3115-39-7

Post Buying Request

3115-39-7 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

3115-39-7 Usage

Uses

Phosphoric acid dioctyl ester is used in conjunction with polyaniline as an active pigment in various resins and also protects iron from corrosion. Phosphoric acid dioctyl ester is also used in multichannel taste sensors, devices that transform information about taste into electrical signals and subsequently analyzed by a computer.

Check Digit Verification of cas no

The CAS Registry Mumber 3115-39-7 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 3,1,1 and 5 respectively; the second part has 2 digits, 3 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 3115-39:
(6*3)+(5*1)+(4*1)+(3*5)+(2*3)+(1*9)=57
57 % 10 = 7
So 3115-39-7 is a valid CAS Registry Number.
InChI:InChI=1/C16H35O4P/c1-3-5-7-9-11-13-15-19-21(17,18)20-16-14-12-10-8-6-4-2/h3-16H2,1-2H3,(H,17,18)

3115-39-7SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 14, 2017

Revision Date: Aug 14, 2017

1.Identification

1.1 GHS Product identifier

Product name Octyl phosphate, (C8H17O)2(HO)PO

1.2 Other means of identification

Product number -
Other names O,O-di-n-octylphosphoric acid

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:3115-39-7 SDS

3115-39-7Downstream Products

3115-39-7Relevant articles and documents

PHOSPHORUS-BASED RELEASING AGENT, OPTICAL POLYMERIZABLE COMPOSITION COMPRISING SAME AND PREPARATION THEREOF

-

Paragraph 0066; 0068, (2019/09/06)

Embodiments relate to a polymerizable composition comprising a phosphorus-based mold releasing agent for an optical use whose preparation process is improved, and a process for preparing the phosphorus-based mold releasing agent. The phosphorus-based mold releasing agents can be prepared more easily and conveniently by using phosphorous pentoxide, which can easily react with a monoalcohol and/or water at room temperature in the absence of a catalyst or a solvent. In addition, byproducts are not generated during the reaction. Thus, when a lens is produced by using the mold release agent obtained therefrom, it is possible to prevent a defective appearance of the lens that may be caused by byproducts, thereby further enhancing the appearance properties thereof. Further, since separate steps for removing byproducts, specifically, such steps as washing and filtration, are not required, wastewater is not generated. Thus, it is not only environmentally friendly, but the production cost can also be reduced as the process is simple.

GELLED HYDROCARBONS FOR OILFIELD PROCESSES, PHOSPHATE ESTER COMPOUNDS USEFUL IN GELLATION OF HYDROCARBONS AND METHODS FOR PRODUCTION AND USE THEREOF

-

Page/Page column 7, (2011/04/14)

Phosphate esters useful for gelling hydrocarbons in combination with a metal source are disclosed along with methods of preparation of the phosphate esters. Fouling in oil refinery towers has been attributed due to distillation of impurities present in phosphate esters used to gel hydrocarbons for oil well fracturing. The improved method of preparation of the phosphate ester results in a product that substantially reduces or eliminates volatile phosphorus, which is phosphorus impurities that distill up to 250° C., and increases the high temperature viscosity of the hydrocarbon gels formed using the phosphate esters.

GELLED HYDROCARBONS FOR OILFIELD PROCESSES, PHOSPHATE ESTER COMPOUNDS USEFUL IN GELLATION OF HYDROCARBONS AND METHODS FOR PRODUCTION AND USE THEREOF

-

, (2009/08/18)

Phosphate esters useful for gelling hydrocarbons in combination with a metal source are disclosed along with methods of preparation of the phosphate esters. Fouling in oil refinery towers has been attributed due to distillation of impurities present in phosphate esters used to gel hydrocarbons for oil well fracturing. The improved method of preparation of the phosphate ester results in a product that substantially reduces or eliminates volatile phosphorus, which is phosphorus impurities that distill up to 250° C., and increases the high temperature viscosity of the hydrocarbon gels formed using the phosphate esters.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 3115-39-7