Welcome to LookChem.com Sign In|Join Free

CAS

  • or

4850-71-9

Post Buying Request

4850-71-9 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

4850-71-9 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 4850-71-9 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 4,8,5 and 0 respectively; the second part has 2 digits, 7 and 1 respectively.
Calculate Digit Verification of CAS Registry Number 4850-71:
(6*4)+(5*8)+(4*5)+(3*0)+(2*7)+(1*1)=99
99 % 10 = 9
So 4850-71-9 is a valid CAS Registry Number.

4850-71-9SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 20, 2017

Revision Date: Aug 20, 2017

1.Identification

1.1 GHS Product identifier

Product name [(R)-methylsulfinyl]benzene

1.2 Other means of identification

Product number -
Other names -

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:4850-71-9 SDS

4850-71-9Relevant articles and documents

Biocatalytic oxidation by chloroperoxidase from Caldariomyces fumago in polymersome nanoreactors

De Hoog,Nallani,Cornelissen,Rowan,Nolte,Arends

, p. 4604 - 4610 (2009)

The encapsulation of chloroperoxidase from Caldariomyces fumago (CPO) in block copolymer polymersomes is reported. Fluorescence and electron microscopy show that when the encapsulating conditions favour self-assembly of the block copolymer, the enzyme is incorporated with concentrations that are 50 times higher than the enzyme concentration before encapsulation. The oxidation of two substrates by the encapsulated enzyme was studied: i) pyrogallol, a common substrate used to assay CPO enzymatic activity and ii) thioanisole, of which the product, (R)-methyl phenyl sulfoxide, is an important pharmaceutical intermediate. The CPO-loaded polymersomes showed distinct reactivity towards these substrates. While the oxidation of pyrogallol was limited by diffusion of the substrate into the polymersome, the rate-limiting step for the oxidation of thioansiole was the turnover by the enzyme.

Enantioselective Sulfoxidation of Thioanisole by Cascading a Choline Oxidase and a Peroxygenase in the Presence of Natural Deep Eutectic Solvents

Li, Yongru,Ma, Yunjian,Li, Peilin,Zhang, Xizhen,Ribitsch, Doris,Alcalde, Miguel,Hollmann, Frank,Wang, Yonghua

, p. 254 - 257 (2020)

A bienzymatic cascade for selective sulfoxidation is presented. The evolved recombinant peroxygenase from Agrocybe aegeritra catalyses the enantioselective sulfoxidation of thioanisole whereas the choline oxidase from Arthrobacter nicotianae provides the

Application of various ionic liquids as cosolvents for chloroperoxidase- catalysed biotransformations

Lichtenecker, Roman J.,Schmid, Walther

, p. 509 - 512 (2009)

Chloroperoxidase from Caldariomyces fumago catalyses oxidation of indole and thioanisole in reaction mixtures containing up to 40% (v/v) of different ionic liquids (ILs). Results indicate that ILs containing tosylate, trifluoroacetate, chloride, and methylsulfate anions are suitable cosolvents for these transformations, yielding high enantiomeric excess and good conversion rates.

Chiral separation materials based on derivatives of 6-amino-6-deoxyamylose

Gao, Ya-Ya,Zhang, Yu-Hang,Zhang, Shan,Chen, Wei,Bai, Zheng-Wu

supporting information, p. 899 - 914 (2021/10/07)

In order to develop new type of chiral separation materials, in this study, 6-amino-6-deoxyamylose was used as chiral starting material with which 10 derivatives were synthesized. The amino group in 6-amino-6-deoxyamylose was selectively acylated and then the hydroxyl groups were carbamoylated yielding amylose 6-amido-6-deoxy-2,3-bis(phenylcarbamate)s, which were employed as chiral selectors (CSs) for chiral stationary phases of high-performance liquid chromatography. The resulted 6-amido-6-deoxyamyloses and amylose 6-amido-6-deoxy-2,3-bis(phenylcarbamate)s were characterized by IR, 1H NMR, and elemental analysis. Enantioseparation evaluations indicated that most of the CSs demonstrated a moderate chiral recognition capability. The 6-nonphenyl (6-nonPh) CS of amylose 6-cyclohexylformamido-6-deoxy-2,3-bis(3,5-dimethylphenylcarbamate) showed the highest enantioselectivity towards the tested chiral analytes; the phenyl-heterogeneous (Ph-hetero) CS of amylose 6-(4-methylbenzamido)-6-deoxy-2,3-bis(3,5-dimethylphenylcarbamate) baseline separated the most chiral analytes; the phenyl-homogeneous (Ph-homo) CS of amylose 6-(3,5-dimethylbenzamido)-6-deoxy-2,3-bis(3,5-dimethylphenylcarbamate) also exhibited a good enantioseparation capability among the developed CSs. Regarding Ph-hetero CSs, the enantioselectivity depended on the combination of the substituent at 6-position and that at 2- and 3-positions; as for Ph-homo CSs, the enantioselectivity was related to the substituent at 2-, 3-, and 6-positions; with respect to 6-nonPh CSs, the retention factor of most analytes on the corresponding CSPs was lower than that on Ph-hetero and Ph-homo CSPs in the same mobile phases, indicating π–π interactions did occur during enantioseparation. Although the substituent at 6-position could not provide π–π interactions, the 6-nonPh CSs demonstrated an equivalent or even higher enantioselectivity compared with the Ph-homo and Ph-hetero CSs.

Ionic liquid-functionalized amphiphilic Janus nanosheets afford highly accessible interface for asymmetric catalysis in water

Li, Chaoping,Liu, Su,Pi, Yibing,Feng, Jingwen,Liu, Zewei,Li, Shiye,Tan, Rong

, p. 236 - 245 (2021/02/16)

High oil/water interfacial area together with accessible interfaces for regents is the key to achieving efficient asymmetric catalysis in water. Herein, by taking advantage of the excellent interfacial activity of Janus nanosheets (JNS), as well as the unique compatibility of imidazolium ionic liquid (IL), we developed a series of IL-functionalized amphiphilic Janus mesosilica nanosheets which afford highly accessible reaction interfaces for highly enantioselective sulfoxidation in water. The JNS-typed chiral salen TiIV catalysts were prepared by selectively decorating hydrophobic chiral salen TiIV complex on one side of Janus mesosilica nanosheets through the imidazolium-based IL linker. Benefiting from the two-dimensional porous Janus structure, as well as the compatible IL linker, the IL-tagged JNS catalysts afforded high oil/water interfacial areas and highly accessible reaction interface for sulfides and H2O2, significantly accelerating asymmetric sulfoxidation in water using H2O2 as an oxidant. In addition, they can be facilely recovered for stable reuse by simple centrifugation.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 4850-71-9