6052-11-5Relevant articles and documents
Cobalt-Catalyzed Deoxygenative Hydroboration of Nitro Compounds and Applications to One-Pot Synthesis of Aldimines and Amides
Gudun, Kristina A.,Hayrapetyan, Davit,Khalimon, Andrey Y.,Segizbayev, Medet,Slamova, Ainur,Zakarina, Raikhan
, (2021/11/30)
The commercially available and bench-stable Co(acac)2 ligated with bis[(2-diphenylphosphino)phenyl] ether (dpephos) was employed for selective room temperature hydroboration of nitro compounds with HBPin (TOF up to 4615 h?1), tolerating halide, hydroxy, amino, ether, ester, lactone, amide and heteroaromatic functionalities. These reactions offered a direct access to a variety of N-borylamines RN(H)BPin, which were in situ treated with aldehydes and carboxylic acids to produce a series of aldimines and secondary carboxamides without the need for dehydrating and/or coupling reagents. Combination of these transformations in a sequential one-pot manner allowed for direct and selective synthesis of aldimines and secondary carboxamides from readily available and inexpensive nitro compounds.
The preparation and photocatalytic activity of Ag-Pd/g-C3N4 for the coupling reaction between benzyl alcohol and aniline
Ma, Jingjing,Yu, Xiujuan,Liu, Xiaoling,Li, Haiying,Hao,Li, Jingyi
, (2019/08/01)
In this study, the carrier g-C3N4 was prepared by melamine, and the Ag-Pd/g-C3N4 catalyst was synthesized by the NaBH4 reduction method. Different characterization techniques, including SEM, TEM, XRD, UV–vis DRS, XPS, photoluminescence spectra (PL) and BET, were employed to investigate the morphology and optical properties of the as-prepared samples. The Ag-Pd/g-C3N4 catalyst was used for the synthesis of imine from a benzyl alcohol and aniline. The results show that when the total loading of Ag and Pd is 2 wt%, and the mass ratio of Ag and Pd is 1:1, the activity of the catalyst is the highest (The highest conversion of aniline is 86.7% and the product selectivity is >99%.). The reaction is optimized by changing the type of solvent, the type and amount of base, the type of catalyst, and the amount of reactants. The optimal reaction conditions are 6 ml of n-hexane, 1.4 mmol of Cs2CO3, 50 mg of the Ag-Pd/g-C3N4 (2 wt%, 1:1), and 2:1 mol ratio of benzyl alcohol and aniline. Under optimal reaction conditions, alcohol derivatives and amine derivatives were investigated to determine the suitable range of the catalyst for alcohols and amines. Then, the effects of different light intensities and wavelengths on the reaction were explored. Additionally, the catalyst's recycling ability was tested, and it was found to be relatively stable. The effect of reactive groups on the mechanism shows that the reaction is mainly achieved by the synergy between h+, e? and ·O2?.
Facile Preparation of a Stable Fe3O4@LDH@NiB Magnetic Core-Shell Nanocomposite for Hydrogenation
Gao, Xuejia,Niu, Libo,Qiao, Xianliang,Feng, Wenhui,Cao, Yingying,Bai, Guoyi
, p. 1149 - 1156 (2017/07/25)
A novel NiB deposited layered double hydroxide (LDH) coated ferroferric oxide (Fe3O4@LDH@NiB) magnetic core-shell nanocomposite was successfully fabricated by the combination of coprecipitation and impregnation-reduction. During the Fe3O4@LDH preparation, a facile template-free approach was employed to introduce the LDH shell, which was more efficient than the conventional method for the preparation of mesoporous materials that always needs to introduce and remove templates. The resulted Fe3O4@LDH has a relatively high surface area and abundant surface hydroxyl group, which can adsorb metal ions, making it favorable to disperse and stabilize the active Ni species, as demonstraed by TEM, XPS, FT-IR and BET characterizations. Therefore, it exhibited good activity in the selective hydrogenation of cinnamic acid to hydrocinnamic acid with the conversion and selectivity both approaching to 100%. Notably, the obtained Fe3O4@LDH@NiB can be easily separated by an external magnetic field and recycled eleven times without appreciable loss of its initial catalytic activity.
