Welcome to LookChem.com Sign In|Join Free

CAS

  • or

92-94-4

Post Buying Request

92-94-4 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

92-94-4 Usage

Description

p-Terphenyl(PTP) is an aromatic hydrocarbon isomer, formed by three benzene rings in ortho position. Pure terphenyl is a white crystalline solid, insoluble in water. Though polychlorinated terphenyls were used as heat storage and transfer agents, p-terphenyl is currently under investigation as a material to be used in opto-electronic devices, such as organic LED devices (OLEDs) and currently used in laser dyes and sunscreen lotions. In particle physics it has been used as a wavelength shifter, exploiting its sensitivity to VUV radiation, to read out scintillation light from liquid Xenon. Pterphenyl has also been used as a doping component for liquid scintillators.So far, p-terphenyl has not been used as main component of particle detectors due to its short Light Attenuation Length. As a matter of fact this property could be exploited when detecting low-energy charged particles in small areas, providing both energy and position measurement.

Chemical Properties

a White or light-yellow solid. The melting point is 213°C, boiling point is 383°C, 250°C (6kPa), flash point is 207°C, and relative density is 1.234 (0°C). Soluble in hot benzene, slightly soluble in ether and carbon disulfide, extremely insoluble in ethanol and acetic acid. 427℃ sublimation. p-Terphenyl can be separated from the by-products of biphenyl production.

Uses

p-Terphenyl is a specialty material, and may be used in ionized radiation detectors, nonpolar laser dye, and single molecule optical probe of scanning near-field microscopy.

Definition

ChEBI: p-Terphenyl is a para-terphenyl that consists of benzene attached to two phenyl units at positions 1 and 4 respectively.

Application

LCD Electronics: P-Terphenyl is one of the basic intermediates for preparing diphenyl LCD materials at present.Organic synthesis: P-Terphenyl is the basic raw material for synthesizing antifungal cyclic peptide (4-carboxyl P–Terphenyl CTP) and diphenyl polyamide material 4, 4-(DCTP).Fine chemical engineering: under radiation, P-Terphenyl will generate fluorescence, and thus it can be used as an organic scintillation reagent. It is used as an illuminant in scintillation counters and as a synthetic intermediate for laser dyes.p-Terphenyl-Sensitized Photoreduction of CO2 with Cobalt and Iron Porphyrins. Interaction between CO and Reduced Metalloporphyrins

Synthesis Reference(s)

Chemical and Pharmaceutical Bulletin, 30, p. 802, 1982 DOI: 10.1248/cpb.30.802The Journal of Organic Chemistry, 50, p. 3104, 1985 DOI: 10.1021/jo00217a018

General Description

White or light-yellow needles or leaves. Mp: 212-213°C; bp 376°C. Density: 1.23 g cm-3. Insoluble in water. Soluble in hot benzene. Very soluble in hot ethyl alcohol. Usually shipped as a solid mixture with its isomers o-terphenyl and m-terphenyl that is used as a heat-transfer fluid.

Reactivity Profile

p-Terphenyl is non-flammable but combustible (flash point: 410°C). Extremely stable thermally. Incompatible with strong oxidizing agents but not very reactive at room conditions.

Hazard

Toxic by ingestion and inhalation. Eye and upper respiratory tract irritant.

Purification Methods

Crystallise p-terphenyl from nitrobenzene or trichlorobenzene. It is also purified by chromatography on alumina in a darkened room, using pet ether, and then crystallising from pet ether (b 40-60o) or pet ether/*benzene. It is a fluorophore for scintillation counting and has ex 286nm : em 343nm in DMF, and max 277nm (log 4.50). [Beilstein 5 IV 2483.]

Check Digit Verification of cas no

The CAS Registry Mumber 92-94-4 includes 5 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 2 digits, 9 and 2 respectively; the second part has 2 digits, 9 and 4 respectively.
Calculate Digit Verification of CAS Registry Number 92-94:
(4*9)+(3*2)+(2*9)+(1*4)=64
64 % 10 = 4
So 92-94-4 is a valid CAS Registry Number.
InChI:InChI=1/C18H14/c1-3-7-15(8-4-1)17-11-13-18(14-12-17)16-9-5-2-6-10-16/h1-14H

92-94-4 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • Alfa Aesar

  • (A14833)  p-Terphenyl, 99+%   

  • 92-94-4

  • 25g

  • 250.0CNY

  • Detail
  • Alfa Aesar

  • (A14833)  p-Terphenyl, 99+%   

  • 92-94-4

  • 100g

  • 775.0CNY

  • Detail
  • Alfa Aesar

  • (A14833)  p-Terphenyl, 99+%   

  • 92-94-4

  • 250g

  • 1695.0CNY

  • Detail
  • Sigma-Aldrich

  • (86470)  p-Terphenyl  suitable for scintillation, ≥98.5% (HPLC)

  • 92-94-4

  • 86470-50G

  • 560.43CNY

  • Detail
  • Sigma-Aldrich

  • (45802)  p-Terphenyl  analytical standard

  • 92-94-4

  • 45802-250MG

  • 556.92CNY

  • Detail
  • Aldrich

  • (T3203)  p-Terphenyl  ≥99.5% (HPLC)

  • 92-94-4

  • T3203-1G

  • 533.52CNY

  • Detail
  • Aldrich

  • (T3203)  p-Terphenyl  ≥99.5% (HPLC)

  • 92-94-4

  • T3203-5G

  • 800.28CNY

  • Detail
  • Aldrich

  • (T3203)  p-Terphenyl  ≥99.5% (HPLC)

  • 92-94-4

  • T3203-25G

  • 1,068.21CNY

  • Detail
  • Aldrich

  • (T3203)  p-Terphenyl  ≥99.5% (HPLC)

  • 92-94-4

  • T3203-100G

  • 1,470.69CNY

  • Detail

92-94-4SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 16, 2017

Revision Date: Aug 16, 2017

1.Identification

1.1 GHS Product identifier

Product name 1,4-diphenylbenzene

1.2 Other means of identification

Product number -
Other names p-tert-butylthiophenol

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:92-94-4 SDS

92-94-4Relevant articles and documents

Mechanistic and kinetic studies of cobalt macrocycles in a photochemical CO2 reduction system: Evidence of Co-CO2 adducts as intermediates

Ogata, Tomoyuki,Yanagida, Shozo,Brunschwig, Bruce S.,Fujita, Etsuko

, p. 6708 - 6716 (1995)

Cobalt macrocycles mediate electron transfer in the photoreduction of CO2 with p-terphenyl as a photosensitizer and a tertiary amine as a sacrificial electron donor in a 5:1 acetonitrile/methanol mixture. The mechanism and kinetics of this system have been studied by continuous and flash photolysis techniques. Transient spectra provide evidence for the sequential formation of the p-terphenyl radical anion, the CoIL+ complex, the [CoIL-CO2]+ complex, and the [S-CoIIIL-(CO22-)]+ complex (L = HMD = 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene; S = solvent) in the catalytic system. The electron-transfer rate constant for the reaction of p-terphenyl radical anion with CoIIL2+ is 1.1 × 1010 M-1 s-1 and probably diffusion controlled because of the large driving force (~+1.1 V). Flash photolysis studies yield a rate constant 1.7 × 108 M-1 s-1 and an equilibrium constant 1.1 × 104 M-1 for the binding of CO2 to CoIL+ in the catalytic system. These are consistent with those previously obtained by conventional methods in acetonitrile. Studies of catalytic systems with varying cobalt macrocycles highlight some of the factors controlling the kinetics of the photoreduction of CO2. Steric hindrance and reduction potentials are important factors in the catalytic activity for photochemical CO2 reduction.

The synthesis of SBA-Pr-3AP@Pd and its application as a highly dynamic, eco-friendly heterogeneous catalyst for Suzuki–Miyaura cross-coupling reaction

Mohajer, Fatemeh,Mohammadi Ziarani, Ghodsi,Badiei, Alireza

, p. 4909 - 4922 (2020)

The hexagonal mesoporous organic–inorganic hybrid as a new nanocatalyst was prepared by the treatment of SBA-15 with (3-chloropropyl)triethoxysilane, the 2,4,6-triamino pyrimidine ligand, and then PdCl2 to obtain the SBA-15-propyl-triamino pyrimidine@Pd called as SBA-Pr-3AP@Pd, which was examined through Suzuki–Miyaura cross-coupling reaction by several aryl halides and phenylboronic acid under mild conditions in high yield.

Postsynthetic Metalation of a Robust Hydrogen-Bonded Organic Framework for Heterogeneous Catalysis

Han, Bin,Wang, Hailong,Wang, Chiming,Wu, Hui,Zhou, Wei,Chen, Banglin,Jiang, Jianzhuang

, p. 8737 - 8740 (2019)

Hydrogen-bonded organic framework (HOF)-based catalysts still remain unreported thus far due to their relatively weak stability. In the present work, a robust porous HOF (HOF-19) with a Brunauer-Emmett-Teller surface area of 685 m2 g-1 was reticulated from a cagelike building block, amino-substituted bis(tetraoxacalix[2]arene[2]triazine), depending on the hydrogen bonding with the help of π-πinteractions. The postsynthetic metalation of HOF-19 with palladium acetate afforded a palladium(II)-containing heterogeneous catalyst with porous hydrogen-bonded structure retained, which exhibits excellent catalytic performance for the Suzuki-Miyaura coupling reaction with the high isolation yields (96-98%), prominent stability, and good selectivity. More importantly, by simple recrystallization, the catalytic activity of deactivated species can be recovered from the isolation yield 46% to 92% for 4-bromobenzonitrile conversion at the same conditions, revealing the great application potentials of HOF-based catalysts.

Murray,Kaplan

, p. 2903,2904, 2906 (1965)

Synthesis and characterization of palladium nanoparticles immobilized on graphene oxide functionalized with triethylenetetramine or 2,6-diaminopyridine and application for the Suzuki cross-coupling reaction

Boukherroub, Rabah,Mirza-Aghayan, Maryam,Mohammadi, Marzieh

, (2021/11/22)

Graphene oxide (GO) was functionalized with two organic ligands, triethylenetetramine (TETA) or 2,6-diaminopyridine (DAP), followed by palladium nanoparticles (Pd NPs) for the synthesis of Pd NPs/GO-TETA and Pd NPs/GO-DAP nanocomposites, respectively. The two heterogeneous nanocomposites were fully characterized and their efficiency was investigated for C[sbnd]C bond formation for the synthesis of biaryl compounds via the Suzuki cross-coupling reaction of aryl halides with arylboronic acid derivatives. The obtained results indicated that the Pd NPs/GO-TETA nanocomposite was more effective in the Suzuki coupling reaction as compared to Pd NPs/GO-DAP. Thus, the Suzuki cross-coupling reaction of different aryl halides with arylboronic acid derivatives using Pd NPs/GO-TETA nanocomposite catalyst in the presence of Na2CO3 as base in DMF/H2O (1/1) as solvent at 90 °C was carried out to afford the desired biaryl compounds in high to excellent yields (81–100%) and short reaction times (10–90 min). Additionally, Pd NPs/GO-TETA nanocomposite can be recovered and reused for 8 consecutive runs without any apparent loss of its catalytic activity, proving its high stability and potential use in organic transformations.

Suzuki cross-coupling of hexachlorobenzene promoted by the Buchwald ligands

Burukin, A. S.,Vasil’ev, A. A.,Zhdankina, G. M.,Zlotin, S. G.

, p. 169 - 172 (2022/02/17)

The study of cross-coupling between hexachlorobenzene and phenylboronic acid comprised five Buchwald ligands, from which 2-dicyclohexylphosphino-2′-(dimethylamino)biphenyl (DavePHOS) provided the best conversion. When excess of phenylboronic acid was used, a mixture of isomeric tri-, tetra- and pentaphenyl-substituted derivatives in the ~10:70:20 ratio was obtained, along with minor amounts of hydrodechlorination products.

Nickel-Catalyzed Direct Cross-Coupling of Aryl Sulfonium Salt with Aryl Bromide

Ma, Na-Na,Ren, Jing-Ao,Liu, Xiang,Chu, Xue-Qiang,Rao, Weidong,Shen, Zhi-Liang

supporting information, p. 1953 - 1957 (2022/03/27)

The direct cross-couplings of aryl sulfonium salts with aryl halides could be achieved by using nickel as a reaction catalyst. The reactions proceeded efficiently via C-S bond activation in the presence of magnesium turnings and lithium chloride in THF at ambient temperature to afford the corresponding biaryls in moderate to good yields, potentially serving as an attractive alternative to conventional cross-coupling reactions employing preprepared organometallic reagents.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 92-94-4
  • ©2008 LookChem.com,License:ICP NO.:Zhejiang16009103 complaints:service@lookchem.com
  • [Hangzhou]86-571-87562588,87562561,87562573 Our Legal adviser: Lawyer