97-99-4Relevant articles and documents
Supported Ultrafine NiCo Bimetallic Alloy Nanoparticles Derived from Bimetal-Organic Frameworks: A Highly Active Catalyst for Furfuryl Alcohol Hydrogenation
Wang, Huanjun,Li, Xiaodan,Lan, Xiaocheng,Wang, Tiefeng
, p. 2121 - 2128 (2018)
Highly dispersed NiCo bimetallic alloy nanoparticles have been successfully immobilized on the SiO2 frameworks by using heteronuclear metal-organic frameworks (MOFs) as metal alloy precursors. Catalyst characterizations revealed that the average size of NiCo alloy particles was less than 1 nm, with a total metal loading of about 20 wt %. As compared to individual Ni or Co MOF-derived catalysts and the catalysts prepared by the conventional impregnation method, the ultrafine NiCo/SiO2-MOF catalyst showed a much better catalytic performance in the catalytic hydrogenation of furfuryl alcohol (FA) to tetrahydrofurfuryl alcohol (THFA) under mild conditions, giving 99.8% conversion of FA and 99.1% selectivity to THFA. It was found that a significant synergistic effect existed between Co and Ni within the subnanometer NiCo/SiO2-MOF catalyst, which was 2 and 20 times more active than Ni/SiO2-MOF and Co/SiO2-MOF, respectively.
A facile conversion of furfural to novel tetrahydrofurfuryl hemiacetals
Dobro?ka, Edmund,Fulajtárová, Katarína,Horváth, Bla?ej,Hronec, Milan,Liptaj, Tibor
, (2020)
An entirely new and highly selective method for preparation of novel tetrahydrofurfuryl hemiacetals is described. The process is based on the catalytic hydrogenation of furfural in an alcohol under mild reaction conditions and at very short reaction times. As a highly active and selective catalyst palladium supported on calcium carbonate is used. Basic sites of the catalyst support enhance the formation of furfuryl hemiacetal as the intermediate which is instantaneously hydrogenated into stable tetrahydrofurfuryl hemiacetal. About 85–90 % yields of tetrahydrofurfuryl hemialkylacetals can be achieved within 20 min by reaction of furfural in alcoholic solutions at 60 °C and 0.3 MPa of hydrogen. The mechanism of reductive acetalization of furfural into tetrahydrofurfuryl hemialkylacetals is proposed.
Metal-organic-framework derived Co-Pd bond is preferred over Fe-Pd for reductive upgrading of furfural to tetrahydrofurfuryl alcohol
Pendem, Saikiran,Bolla, Srinivasa Rao,Morgan, David J.,Shinde, Digambar B.,Lai, Zhiping,Nakka, Lingaiah,Mondal, John
, p. 8791 - 8802 (2019)
Combined noble-transition metal catalysts have been used to produce a wide range of important non-petroleum-based chemicals from biomass-derived furfural (as a platform molecule) and have garnered colossal research interest due to the urgent demand for sustainable and clean fuels. Herein, we report the palladium-modified metal-organic-framework (MOF) assisted preparation of PdCo3O4 and PdFe3O4 nanoparticles encapsulated in a graphitic N-doped carbon (NC) matrix via facile in situ thermolysis. This provides a change in selectivity with superior catalytic activity for the reductive upgrading of biomass-derived furfural (FA). Under the optimized reaction conditions, the newly designed PdCo3O4@NC catalyst exhibited highly efficient catalytic performance in the hydrogenation of furfural, providing 100% furfural conversion with 95% yield of tetrahydrofurfuryl alcohol (THFAL). In contrast, the as-synthesized Pd-Fe3O4@NC afforded a THFAL yield of 70% after an 8 h reaction with four consecutive recycling tests. Based on different characterization data (XPS, H2-TPR) for nanohybrids, we can conclude that the presence of PdCo-Nx active sites, and the multiple synergistic effects between Co3O4 and Pd(ii), Co3O4 and Pd0, as well as the presence of N in the carbonaceous matrix, are responsible for the superior catalytic activity and improved catalyst stability. Our strategy provides a facile design and synthesis process for a noble-transition metal alloy as a superior biomass refining, robust catalyst via noble metal modified MOFs as precursors.
Craig et al.
, p. 3277 (1950)
High-Temperature Synthesis of Carbon-Supported Bimetallic Nanocluster Catalysts by Enlarging the Interparticle Distance
Zuo, Lu-Jie,Xu, Shi-Long,Wang, Ao,Yin, Peng,Zhao, Shuai,Liang, Hai-Wei
supporting information, p. 2719 - 2723 (2022/02/16)
Supported bimetallic nanoparticle catalysts with small size have attracted wide research attention in catalysis but are difficult to synthesize because high-temperature annealing required for alloying inevitably accelerates metal sintering and leads to larger particles. Here, we report a simple and scalable critical interparticle distance method for the synthesis of a family of bimetallic nanocluster catalysts with an average particle size of only 1.5 nm by using large-surface-area carbon black supports at high temperatures, which consist of 12 diverse combinations of 3 noble metals (Pt, Ru, and Rh) and 4 other metals (Cr, Fe, Zr, and Sn). In this strategy, high-temperature treatments ensure the formation of alloyed bimetallic nanoparticles and enlargement of the interparticle distance on high-surface-area supports significantly suppresses metal sintering. The prepared ultrafine Pt2Sn and RuSn nanocluster catalysts exhibited enhanced performance in catalyzing the synthesis of aromatic secondary amines and the selective hydrogenation of furfural, respectively.
Selective hydrogenation of furfural to furfuryl alcohol over Pd/TiH2 catalyst
Wang, Zhuangqing,Wang, Xinchao,Zhang, Chao,Arai, Masahiko,Zhou, Leilei,Zhao, Fengyu
, (2021/05/13)
In this work, the selective hydrogenation of furfural to furfuryl alcohol has been studied over Pd/TiH2 catalysts. The catalytic performances of several catalysts with different Pd loading (0.2–3% in weight) were discussed, among which a higher selectivity to furfuryl alcohol was obtained over 0.5Pd/TiH2 and it gave rise to a 73% furfural alcohol selectivity at complete conversion at 60 °C. The physicochemical properties of catalysts were well characterized by TEM, XRD, XPS, Raman, TPR and TPD, as well as in-situ DRIFT for the adsorption of the reactant. The size and the electronic state of Pd particles, and the surface defects of catalysts presented significant influence on the catalytic performance. The furfural is preferentially adsorbed with its C=O bond on the boundary of Pd particle and TiH2 support, leading to the high selectivity to furfuryl alcohol.
Effect of Ni Metal Content on Emulsifying Properties of Ni/CNTox Catalysts for Catalytic Conversion of Furfural in Pickering Emulsions
Herrera,Pinto-Neira,Fuentealba,Sepúlveda,Rosenkranz,García-Fierro,González,Escalona
, p. 682 - 694 (2020/12/01)
Ni/CNTox catalysts with variable metal content have been prepared to investigate their emulsifying and catalytic properties for the liquid-phase conversion of furfural. The solid catalysts and emulsions were analyzed by several characterization techniques. The catalytic activity linearly increased with increasing Ni content (up to 10 wt.%) before dropping down again for a Ni content of 15 wt.%. The loss of catalytic activity was attributed to larger emulsion droplets formed by the inhibition of hydrophilic sites. All Ni/CNTox catalysts were highly selective to cyclopentanone as a main product, while several changes regarding secondary products were observed. Ni/CNTox catalysts with a Ni content up to 10 wt.% favor the formation of levulinic acid, while catalysts with a Ni content of 15 wt.% were selective to tetrahydrofurfuryl alcohol. This was attributed to an inhibition of the acid sites thus favoring the catalyst's hydrogenation capacity.