Chemical Property of AMBERLITE(R) IRA-410
Chemical Property:
- Vapor Pressure:17 mm Hg ( 20 °C)
- PSA：0.00000
- LogP:0.00000
- Storage Temp.:Indoors
- Purity/Quality:
-
98%min *data from raw suppliers
Amberlite? IRA-410 chloride form chloride form, matrix styrene/divinylbenzene (gel), 20-25?mesh *data from reagent suppliers
Safty Information:
- Pictogram(s):
- Hazard Codes:Xi
- Statements:
36/38
- Safety Statements:
26
- MSDS Files:
-
Useful:
-
Description
AMBERLITE IRA410 Cl resin is a type 2 strongly basic anion exchange resin, with a clear gel structure. It is based on crosslinked polystyrene and has a high bead integrity, good regeneration efficiency and excellent rinse performance. It is particularly suited for use in two-column water demineralisation plants (one cation, one anion unit). AMBERLITE IRA410 Cl resin has better regeneration efficiency than type 1 resins, resulting in a higher operating capacity. However, its affinity for silica is lower. Therefore, AMBERLITE IRA410 Cl resin will be mainly used to treat waters with a silica to total anion ratio of less than 30 %. It should be regenerated at ambient temperature.
-
Uses
Amberlite IRA-410, anion exchange resin, is an effective catalyst especially for those reactions involving low catalyst concentrations and relatively low temperature. Amberlite IRA-410 is a gel-type resin having styrene-divinyl-benzene skeletal structure.Amberlite IRA-410 was used as packing material for columns. Amberlite IRA-410 was also used in urinary analysis by HPLC.Strongly basic (type II) anion exchange resin for water conditioning, removing iodine ions, neutralization of solutions, capturing xanthan and xanthene dyes, etc.; better regeneration efficiency than type I base resin.
