Chemical Property of BARIUM SILICATE
Chemical Property:
- Melting Point:1604°C
- Refractive Index:1.67
- Boiling Point:°Cat760mmHg
- Flash Point:°C
- PSA：63.19000
- Density:g/cm3
- LogP:-0.73720
- Water Solubility.:Insoluble in water. Soluble in acids.
- Purity/Quality:
-
98%,99%, *data from raw suppliers
BARIUM SILICATE 95.00% *data from reagent suppliers
Safty Information:
- Pictogram(s):
- Hazard Codes:Xn
- Statements:
20/22
- Safety Statements:
28
- MSDS Files:
-
SDS file from LookChem
Useful:
-
Description
BaSiO3 is orthorhombic with unit-cell dimensions of
a = 5.6182(5)?, b = 12.445(1), c = 4.5816 ?. It is dimorphic
with α-BaSiO3 stable below about 990°C but forms
β-BaSiO3 above 1000°C. A 1:1 mol ratio of BaO–SiO2
fired at 850°C and 1050°C serves to form the two
dimorphs.
The enthalpy of solution of BaSiO3 in (3.15 mol/dm3
HF + 8.13 mol/dm3 HCl) has been measured. From the
results, the standard molar enthalpy of formation of
BaSiO3 (s) was calculated. The value obtained was
-1606.4±2.6 kJ/mol.
-
Uses
In ceramics. Barium silicate films that are suitable for use as transmission media in integrated optical circuits. It is shown that the films, which can be produced with a wide range of refractive indices by suitable selection of the ratio of the target constituents, exhibit low optical attenuation. Hence it is used for integrated optical circuits. It is used in ceramics.
