Products Categories
CAS No.: | 124-70-9 |
---|---|
Name: | Dichloromethylvinylsilane |
Article Data: | 41 |
Molecular Structure: | |
Formula: | C3H6Cl2Si |
Molecular Weight: | 141.072 |
Synonyms: | Silane,dichloromethylvinyl- (6CI,8CI);Dichloro(ethenyl)methylsilane;MVS;MVS (silane);Methyldichlorovinylsilane;Methylethenyldichlorosilane;Methylvinyldichlorosilane;NSC 96610;Vinylmethyldichlorosilane; |
EINECS: | 204-710-3 |
Density: | 1.072 g/cm3 |
Melting Point: | -78 °C |
Boiling Point: | 92.5 °C at 760 mmHg |
Flash Point: | 4.444 °C |
Appearance: | clear colorless to light brown liquid |
Hazard Symbols: | F,C |
Risk Codes: | 11-14-34-37 |
Safety: | 16-26-36/37/39-45 |
Transport Information: | UN 2985 3/PG 2 |
PSA: | 0.00000 |
LogP: | 2.26120 |
What can I do for you?
Get Best Price
Dichloromethylvinylsilane, with the CAS registry number 124-70-9, is also named as Vinylmethyldichlorosilane. It belongs to the product categories of Vinyl; Dichlorosilanes; Si (Classes of Silicon Compounds); Si-Cl Compounds; Vinylsilanes, Allylsilanes. Its EINECS number is 204-710-3. This chemical's molecular formula is C3H6Cl2Si and molecular weight is 141.07. This chemical should be sealed and stored in a cool and dry place. Moreover, it should be protected from moist air. In addition, it can be used for synthesis of silicone and silicone oil, silicone rubber and other polymers.
Physical properties of Dichloromethylvinylsilane are: (1)ACD/LogP: 2.12; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 2.12; (4)ACD/LogD (pH 7.4): 2.12; (5)ACD/BCF (pH 5.5): 24.06; (6)ACD/BCF (pH 7.4): 24.06; (7)ACD/KOC (pH 5.5): 339.08; (8)ACD/KOC (pH 7.4): 339.08; (9)#H bond acceptors: 0; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 1; (12)Index of Refraction: 1.431; (13)Molar Refractivity: 34.088 cm3; (14)Molar Volume: 131.655 cm3; (15)Polarizability: 13.514×10-24cm3; (16)Surface Tension: 19.5 dyne/cm; (17)Density: 1.072 g/cm3; (18)Flash Point: 4.444 °C; (19)Enthalpy of Vaporization: 31.855 kJ/mol; (20)Boiling Point: 92.5 °C at 760 mmHg; (21)Vapour Pressure: 58.4 mmHg at 25°C.
Preparation: this chemical can be prepared by Chloromethyldivinylmethylsilane at the temperature of 60 °C. This reaction will need solvent CCl4 with the reaction time of 0.2 hour. This reaction will also need catalyst AlCl3. The yield is about 50%.
Uses of Dichloromethylvinylsilane: it can be used to produce diallyl-methyl-vinyl-silane by heating. It will need reagent allyl chloride and solvent diethyl ether with the reaction time of 3 hours. The yield is about 98.3%.
When you are using this chemical, please be cautious about it as the following:
This chemical is highly flammable, so you should keep it away from sources of ignition - No smoking. It will react violently with water and is irritating to respiratory system. In case of contact with eyes, you should rinse immediately with plenty of water and seek medical advice. When using it, you need wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, you must seek medical advice immediately (show the label where possible).
You can still convert the following datas into molecular structure:
(1)SMILES: Fc1cccc(OCCCCCCC)c1F
(2)Std. InChI: InChI=1S/C13H18F2O/c1-2-3-4-5-6-10-16-12-9-7-8-11(14)13(12)15/h7-9H,2-6,10H2,1H3
(3)Std. InChIKey: DTLNCGIPFFKTFC-UHFFFAOYSA-N
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
mouse | LD50 | intravenous | 56mg/kg (56mg/kg) | U.S. Army Armament Research & Development Command, Chemical Systems Laboratory, NIOSH Exchange Chemicals. Vol. NX#03620. |