Products Categories
CAS No.: | 1515-95-3 |
---|---|
Name: | 4-ETHYLANISOLE |
Article Data: | 203 |
Molecular Structure: | |
Formula: | C9H12O |
Molecular Weight: | 136.194 |
Synonyms: | Anisole,p-ethyl- (6CI,7CI,8CI);1-Ethyl-4-methoxybenzene;1-Methoxy-4-ethylbenzene;4-Ethylanisole;4-Ethylmethoxybenzene;4-Methoxyethylbenzene;Methylp-ethylphenyl ether;NSC 5294;p-Ethylanisole;p-Ethylmethoxybenzene;p-Methoxyethylbenzene; |
Density: | 0.931 g/cm3 |
Boiling Point: | 195.5 °C at 760 mmHg |
Flash Point: | 68.5 °C |
Solubility: | Soluble in alcohol. Insoluble in water. |
Appearance: | Clear colorless liquid |
Hazard Symbols: | R10:; |
Risk Codes: | 10 |
Safety: | 24/25 |
PSA: | 9.23000 |
LogP: | 2.25760 |
The Benzene,1-ethyl-4-methoxy- is an organic compound with the formula C9H12O. The IUPAC name of this chemical is 1-Ethyl-4-methoxybenzene. With the CAS registry number 1515-95-3, it is also named as 4-Ethylanisole. The product's categories are Aromatic Ethers; Anisoles, Alkyloxy Compounds and Phenylacetates; Ethers; Organic Building Blocks; Oxygen Compounds. Besides, it is clear colorless liquid, which should be stored in a cool, sealed, dry, well-ventilated, lightproof place.
Physical properties about Benzene,1-ethyl-4-methoxy- are: (1)ACD/LogP: 3.13; (2)ACD/LogD (pH 5.5): 3.13; (3)ACD/LogD (pH 7.4): 3.13; (4)#H bond acceptors: 1; (5)#Freely Rotating Bonds: 2; (6)Index of Refraction: 1.492; (7)Molar Refractivity: 42.48 cm3; (8)Molar Volume: 146.2 cm3; (9)Polarizability: 16.84×10-24 cm3; (10)Surface Tension: 29.3 dyne/cm; (11)Density: 0.931 g/cm3; (12)Flash Point: 68.5 °C; (13)Enthalpy of Vaporization: 41.4 kJ/mol; (14)Boiling Point: 195.5 °C at 760 mmHg; (15)Vapour Pressure: 0.586 mmHg at 25 °C.
Preparation: this chemical can be prepared by 1-Methoxy-4-vinyl-benzene. This reaction will need reagent H2, catalyst Dimer of chloro(1,5-hexadiene)rhodium and solvent hexane. The reaction time is 7 hours. The yield is about 100%.
Uses of Benzene,1-ethyl-4-methoxy-: it can be used to produce 1-Methoxy-4-ethyl-1,4-cyclohexadiene. This reaction is a kind of Bromination. It will need reagents Na; NH3 and solvents tetrahydrofuran; ethanol. The yield is about 81%.
When you are using this chemical, please be cautious about it as the following:
It is flammable. When you are using it, avoid contact with skin and eyes.
You can still convert the following datas into molecular structure:
(1)InChI: InChI=1/C9H12O/c1-3-8-4-6-9(10-2)7-5-8/h4-7H,3H2,1-2H3
(2)InChIKey: HDNRAPAFJLXKBV-UHFFFAOYAU
(3)Std. InChI: InChI=1S/C9H12O/c1-3-8-4-6-9(10-2)7-5-8/h4-7H,3H2,1-2H3
(4)Std. InChIKey: HDNRAPAFJLXKBV-UHFFFAOYSA-N