Products Categories
CAS No.: | 29964-62-3 |
---|---|
Name: | 1,4-Bis(diphenylphosphino)butane-palladium(II) chloride |
Article Data: | 16 |
Molecular Structure: | |
Formula: | C28H28Cl2P2Pd |
Molecular Weight: | 603.804 |
Synonyms: | Palladium,[1,4-butanediylbis[diphenylphosphine]-P,P']dichloro-, (SP-4-2)-;Palladium,dichloro[tetramethylenebis[diphenylphosphine]]- (8CI);Palladium,[1,4-butanediylbis[diphenylphosphine-kP]]dichloro-, (SP-4-2)- (9CI);Phosphine,1,4-butanediylbis[diphenyl-, palladium complex;(1,4-Bis(diphenylphosphino)butane)palladium dichloride;1,4-Butylenebis(diphenylphosphine)palladium dichloride;Dichloro[1,4-bis(diphenylphosphino)butane]palladium;Dichloro[1,4-bis(diphenylphosphino)butane]palladium (II);[1,4-Bis(diphenylphosphino)butane]dichloropalladium;[1,4-Bis(diphenylphosphino)butane]palladium(II)dichloride; |
EINECS: | 243-231-4 |
Melting Point: | 285-305 °C |
Boiling Point: | 542°C at 760 mmHg |
Flash Point: | 299.5°C |
Appearance: | yellow solid |
Hazard Symbols: | Xn |
Risk Codes: | 36/37/38 |
Safety: | 24/25 |
PSA: | 27.18000 |
LogP: | 7.41140 |
hydrogenchloride
palladium
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
Stage #1: hydrogenchloride; palladium With nitric acid In water Stage #2: 1,4-di(diphenylphosphino)-butane In water; N,N-dimethyl-formamide at 50℃; for 1h; | 98.9% |
dichloro bis(acetonitrile) palladium(II)
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
In benzene at 110℃; for 48h; Schlenk technique; Inert atmosphere; | 97% |
In 1,2-dichloro-ethane N2-atmosphere; stirring (room temp., 24 h); concg. (reduced pressure), filtering, washing (Et2O), drying (vac.); elem. anal.; | 94% |
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
In tetrahydrofuran; ethanol stirring for 2 h; evapn., washing with H2O, drying at 80°C for 12 h; | 88% |
bis(benzonitrile)palladium(II) dichloride
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
elem. anal.; | 83% |
In not given | |
In ethanol; dichloromethane | |
In toluene at 20℃; for 0.5h; Inert atmosphere; | |
In toluene at 20℃; for 0.5h; Inert atmosphere; |
dichloro-(1,2-dimethoxy-4,5-bis(2-pyridylethynyl)benzene)palladium
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
In dimethyl sulfoxide room temp., 30 min; monitored by (1)H NMR; | 75% |
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
In acetonitrile stirring (70°C, 2 h), partial solvent evapn. (1/5); recrystn. (dimethylformamide), drying (vacuum); elem. anal.; | 61.4% |
In dimethyl sulfoxide prepn. according to: A. Westland, J. Chem. Soc., (1965) 3060; ligand is mixed with PdCl2 in DMSO and heated at 100°C until a clear soln. is obtained; cooling down, filtration, washing with pentane; | >90 |
dichloro(cycloocta-1,5-diene)palladium (II)
1,4-di(diphenylphosphino)-butane
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
Conditions | Yield |
---|---|
In dichloromethane under N2, addn. of complex in CH2Cl2 to soln. of ligand in CH2Cl2, stirred for 25°C for 2 h, white pptn.; evapd. under reduced press., addn. of toluene, heated under reflux for 4 h, pptn., filtered, dried in vac.; |
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
dichloromethane
silver trifluoromethanesulfonate
Conditions | Yield |
---|---|
In dichloromethane under N2 atm. to suspn. Pd(dppb)Cl2 in CH2Cl2 AgOTf was added and stirred at room temp. for 24 h with exclusion light; soln. was filtered in air and concd. in vacuo, Et2O was added, ppt. was washed with Et2O and dried in vacuo; elem. anal.; | 96% |
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
bis(N,N-diethyldithiocarbamato)mercury(II)
dichloromethane
Conditions | Yield |
---|---|
In dichloromethane stirred for 1 h; filtered, soln. concd. (vac.), pptd. (diethyl ether), ppt. filtered, washed (diethyl ether), dried (vac., 3 h), recrystd. (CH2Cl2); elem. anal.; | 94% |
[1,4-bis(diphenylphosphino)butane] palladium(ll) dichloride
cadmium(II) diethyldithiocarbamate
Conditions | Yield |
---|---|
In dichloromethane stirred for 1 h; filtered, soln. concd. (vac.), pptd. (diethyl ether), ppt. filtered, washed (diethyl ether), dried (vac., 3 h), recrystd. (CH2Cl2); elem. anal.; | 94% |
What can I do for you?
Get Best Price
Empirical Formula: C28H29ClP2Pd
Molecular Weight: 569.3504g/mol
EINECS: 243-231-4
Structure of 1,4-Bis(diphenylphosphino)butane-palladium(II) chloride (CAS NO.29964-62-3):
Physical Appearance: yellow solid
Product Categories: Metal Compounds;Catalysts for Organic Synthesis;Classes of Metal Compounds;Homogeneous Catalysts;Metal Complexes;Pd (Palladium) Compounds;Synthetic Organic Chemistry;Transition Metal Compounds
Systematic Name: (diphenylphosphanyl)palladium(1+) chloride - (1-methylpropyl)(diphenyl)phosphane (1:1)
SMILES: [Cl-].[Pd+]P(c1ccccc1)c2ccccc2.CC(CC)P(c1ccccc1)c2ccccc2
InChI: InChI=1/C16H19P.C12H10P.ClH.Pd/c1-3-14(2)17(15-10-6-4-7-11-15)16-12-8-5-9-13-16;1-3-7-11(8-4-1)13-12-9-5-2-6-10-12;;/h4-14H,3H2,1-2H3;1-10H;1H;/q;-1;;+2/p-1/rC16H19P.C12H10PPd.ClH/c1-3-14(2)17(15-10-6-4-7-11-15)16-12-8-5-9-13-16;14-13(11-7-3-1-4-8-11)12-9-5-2-6-10-12;/h4-14H,3H2,1-2H3;1-10H;1H/q;+1;/p-1 InChIKey: WCTRMVZCSUMBIZ-CTPBABKZAY
Hazard Codes: Xn
Safety Statements: 24/25
S24/25:Avoid contact with skin and eyes.
WGK Germany: 3
F: 1-10
1,4-Bis(diphenylphosphino)butane-palladium(II) chloride , its cas register number is 29964-62-3. It also can be called (Diphenylphosphino)palladium(1+) chloride - sec-butyl(diphenyl)phosphine (1:1:1) ; Palladium(II) chloride-1,4-bis(diphenylphosphine)butane . You should avoid contact 1,4-Bis(diphenylphosphino)butane-palladium(II) chloride (CAS NO.29964-62-3) with skin and eyes.