Products Categories
CAS No.: | 7433-56-9 |
---|---|
Name: | TRANS-5-DECENE |
Article Data: | 95 |
Molecular Structure: | |
Formula: | C10H20 |
Molecular Weight: | 140.269 |
Synonyms: | 5-Decene,(E)- (8CI);(5E)-5-Decene;(E)-5-Decene;5-trans-Decene;NSC 95430;Trans-5-Decene;e-trans-Decene;(5E)-Dec-5-ene;5-Decene;Dec-5-ene; |
EINECS: | 231-080-7 |
Density: | 0.749 g/cm3 |
Melting Point: | -73°C |
Boiling Point: | 169 °C at 760 mmHg |
Flash Point: | 46.1 °C |
Solubility: | Insoluble in water. |
Appearance: | clear, colorless liquid. |
Hazard Symbols: | Xi |
Risk Codes: | 10-36/37/38 |
Safety: | 16-26-36/37/39 |
PSA: | 0.00000 |
LogP: | 3.92300 |
This chemical is called 5-Decene, (5E)-, and it can also be named as trans-5-Decene. With the molecular formula of C10H20, its molecular weight is 140.27. The CAS registry number of this chemical is 7433-56-9, and its product categories are Miscellaneous; Acyclic; Alkenes; Organic Building Blocks. Additionally, this chemical should be sealed in the container and stored in the cool and dry place.
Other characteristics of the 5-Decene, (5E)- can be summarised as followings: (1)ACD/LogP: 5.55; (2)# of Rule of 5 Violations: 1; (3)ACD/LogD (pH 5.5): 5.55; (4)ACD/LogD (pH 7.4): 5.55; (5)ACD/BCF (pH 5.5): 9739.36; (6)ACD/BCF (pH 7.4): 9739.36; (7)ACD/KOC (pH 5.5): 24921.82; (8)ACD/KOC (pH 7.4): 24921.82; (9)#H bond acceptors: 0; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 6; (12)Polar Surface Area: 0 Å2; (13)Index of Refraction: 1.43; (14)Molar Refractivity: 48.43 cm3; (15)Molar Volume: 187.2 cm3; (16)Polarizability: 19.2×10-24 cm3; (17)Surface Tension: 24.6 dyne/cm; (18)Density: 0.749 g/cm3; (19)Flash Point: 46.1 °C; (20)Enthalpy of Vaporization: 38.88 kJ/mol; (21)Boiling Point: 169 °C at 760 mmHg; (22)Vapour Pressure: 2.08 mmHg at 25°C.
Production method of this chemical: 5-Decene, (5E)- can be obtained by pentyl-phenyl sulfone. This reaction needs the reagent of n-BuLi, Ni(II)acetylacetonate, and the solvent of tetrahydrofuran. The yield is 63 %. In addition, this reaction should be taken for 6 hours at the temperature 65 °C.
Uses of this chemical: 5-Decene, (5E)- can react with N-chlorosulfanyl-phthalimide to get 2-(1-butyl-2-chloro-hexylsulfanyl)-isoindole-1,3-dione. This reaction needs the solvent of chlorobenzene at the temperature of 40 °C. The yield is 97 %.
When you are using this chemical, please be cautious about it as the followings: Do not empty into drains and never add water to this product. Do not breathe dust/gas/fumes/vapor/spray. You should keep away from sources of ignition - no smoking and combustible material and avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. You should wear suitable protective clothing, suitable gloves and eye/face protection when you use it. When use this chemical, do not eat, drink or smoke. After using it, take off immediately all contaminated clothing and this material and its container must be disposed of in a safe way.
You can still convert the following datas into molecular structure:
1.SMILES: C(=C/CCCC)\CCCC
2.InChI: InChI=1/C10H20/c1-3-5-7-9-10-8-6-4-2/h9-10H,3-8H2,1-2H3/b10-9+
3.InChIKey: UURSXESKOOOTOV-MDZDMXLPBM
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
mouse | LD50 | intravenous | 100mg/kg (100mg/kg) | | U.S. Army Armament Research & Development Command, Chemical Systems Laboratory, NIOSH Exchange Chemicals. Vol. NX#04170, |