104669-25-2Relevant academic research and scientific papers
Insight into the Modes of Activation of Pyridinium and Bipyridinium Salts in Non-Covalent Organocatalysis
Weiss, Robin,Golisano, Tamara,Pale, Patrick,Mamane, Victor
, p. 4779 - 4788 (2021)
A series of pyridinium and bipyridinium salts were prepared and their catalytic properties were evaluated in the aza-Diels-Alder reaction between imines and Danishefsky diene. Depending on the substituents of the pyridinium/bipyridinium rings and on the nature of the counterion, two mechanisms of activation were demonstrated. In case of non-substituted rings, the substrate is activated through charge transfer involving the aryl ring on the C-side of the imine. When halogen atoms were introduced on the catalysts, the activation mode switched to halogen bond involving the imine nitrogen lone pair. Moreover, alternative activation modes based on hydrogen bonding and radical cation were ruled out. This work allowed us to develop two families of catalysts whose potential was demonstrated in the cycloaddition of various imines with Danishefsky diene. The first family is composed of the simple methyl pyridinium triflate and dioctyl bipyridinium triflate. The former is active only with imines bearing a p-methoxyphenyl group on the C-side and the latter was found to be efficient with imines bearing different substituents on both the N- and C-sides of the imines. The second family is based on halogenated pyridinium salts which proved active with almost all considered imines. (Figure presented.).
Nickel Complexes Bearing N,N,O-Tridentate Salicylaldiminato Ligand: Efficient Catalysts for Imines Formation via Dehydrogenative Coupling of Primary Alcohols with Amines
Han, Zhangang,Hao, Zhiqiang,Lin, Jin,Lu, Guo-Liang,Zhang, Junhua,Zhang, Xiaoying
, p. 3843 - 3853 (2021/11/18)
Treatment of salicylaldiminato ligand L1H-L2H (L1H = 2,4-di-tert-butyl-6-((quinolin-8-ylimino)methyl)phenol; L2H = 2,4-di-tert-butyl-6-(((2-(diethylamino)ethyl)imino)methyl)phenol) with Ni(OAc)2·4H2O in refluxing ethanol afforded nickel complexes [(L1)Ni(OAc)] (1) and [(L2)Ni(OAc)] (2), respectively. Reaction of L3H (L3H = (2,4-di-tert-butyl-6-(((2-(pyridin-2-yl)ethyl)imino)methyl)phenol)) with Ni(OAc)2·4H2O in the presence of excess triethylanmine gave the dual ligands coordinated nickel complex [(L2)2Ni] (3). Complexes 1-3 were well characterized by high-resolution mass spectrometry, infrared spectroscopy, elemental analysis, and X-ray diffraction analysis. All the three Ni(II) complexes exhibited efficient activity and good selectivity in the acceptorless dehydrogenative coupling of alcohols and amines to produce imines and diimines. The present protocol provides an atom-economical and sustainable route for the synthesis of various imine derivatives by employing an earth-abundant nickel salt and easily prepared salicylaldiminato ligands.
A Highly Selective Manganese-Catalyzed Synthesis of Imines under Phosphine-Free Conditions
Chai, Huining,Yu, Kun,Liu, Bo,Tan, Weiqiang,Zhang, Guangyao
, p. 217 - 226 (2020/01/31)
An efficient and highly selective phosphine-free NN-manganese(I) complex catalyst system was developed for the acceptorless dehydrogenative coupling of alcohols with amines to form imines. The coupling reactions underwent at 3 mol % catalyst loading, and a large range of alcohols and amines with diverse functional groups was applied, including challenging diol and diamine. The target imine products were obtained in good to excellent yields. The present work provides an alternative method to construct highly active nonprecious metal complex catalysts based on phosphine-free ligands.
Rhodium-catalyzed synthesis of imines and esters from benzyl alcohols and nitroarenes: Change in catalyst reactivity depending on the presence or absence of the phosphine ligand
Song, Taemoon,Park, Ji Eun,Chung, Young Keun
, p. 4197 - 4203 (2018/04/14)
The [Rh(COD)Cl]2/xantphos/Cs2CO3 system efficiently catalyzes the reductive N-alkylation of aryl nitro compounds with alcohols by a borrowing-hydrogen strategy to afford the corresponding imine products in good to excellent yields. In the absence of xantphos, the [Rh(COD)Cl]2/Cs2CO3 catalytic system behaves as an effective catalyst for the dehydrogenative coupling of alcohols to esters, with nitrobenzene as a hydrogen acceptor. The reactivity of the rhodium catalytic system can be easily manipulated to selectively afford the imine or ester.
Higher Order Constitutional Dynamic Networks: [2×3] and [3×3] Networks Displaying Multiple, Synergistic and Competitive Hierarchical Adaptation
Men, Guangwen,Lehn, Jean-Marie
supporting information, p. 2474 - 2483 (2017/02/23)
The present study investigates the constitutional dynamic networks (CDNs) underlying dynamic covalent libraries (DCLs) that extend beyond the [2×2] case toward higher orders, namely [2×3] and [3×3] CDNs involving respectively six and nine constituents generated from the recombination of five and six components linked through reversible chemical reactions. It explores the behavior of such systems under the action of one or two effectors. More specifically and for the sake of proof of principle, it makes use of DCLs involving dynamic organic ligands and analyzes their single and double adaptive response under the action of one and two metal cation effectors. Thus, interconversions within [2×3] DCLs of six constituents (hydrazone, acylhydrazone, and imine ligands) give access to the generation of [2×3] CDNs of 3D trigonal prismatic type consisting of three [2×2] sub-networks and presenting specific responses to the application of Cu+ and Zn2+ metal cation effectors, in particular double agonistic amplification. More complex [3×3] CDNs based on nine ligand constituents of imine, hydrazone, and acylhydrazone types were also designed and subjected to the application of one or two effectors, e.g., Cu+ and Fe2+ metal cations, revealing novel types of adaptive behavior: (i) agonistic amplification between a single constituent and a full [2×2] sub-network, and (ii) agonistic amplification along a single diagonal connecting three constituents. Of special interest is also the dependence of the response of the system to hierarchical sequence of effector application, whereby initial interaction with Cu+ ions results in the destruction of the network, whereas the sequence Fe2+ followed by Cu+ yields a clean three-constituent DCL. Finally and strikingly, the present results also demonstrate that the increase in complexity of the system by introduction of an additional entity leads to a simpler output through dynamic competition between components.
Tris(2,4,6-trifluorophenyl)borane: An Efficient Hydroboration Catalyst
Lawson, James R.,Wilkins, Lewis C.,Melen, Rebecca L.
supporting information, p. 10997 - 11000 (2017/08/22)
The metal-free catalyst tris(2,4,6-trifluorophenyl)borane has demonstrated its extensive applications in the 1,2-hydroboration of numerous unsaturated reagents, namely alkynes, aldehydes and imines, consisting of a wide array of electron-withdrawing and donating functionalities. A range of over 50 borylated products are reported, with many reactions proceeding with low catalyst loading under ambient conditions. These pinacol boronate esters, in the case of aldehydes and imines, can be readily hydrolyzed to leave the respective alcohol and amine, whereas alkynyl substrates result in vinyl boranes. This is of great synthetic use to the organic chemist.
Oxidative coupling of arylboronic acids with arenes via Rh-catalyzed direct C-H arylation
Vogler, Thomas,Studer, Armido
, p. 129 - 131 (2008/09/16)
Oxidative coupling of three different arenes and a thiophene derivative with various arylboronic acids was achieved with a [RhCl(C2H 4)2]2/P[p-(CF3)C6H 4]3 catalyst sy
Fast and efficient synthesis of pyrano[3,2-c]quinolines catalyzed by niobium(V) chloride
Da Silva-Filho, Luiz Carlos,Lacerda Jr., Valdemar,Constantino, Mauricio Gomes,Da Silva, Gil Valdo Jose
experimental part, p. 2527 - 2536 (2009/04/04)
A highly efficient two-step method for the synthesis of pyranoquinoline derivatives from imino-Diels-Alder reactions between aldimines and 3,4-dihydro-2H-pyran using niobium(V) chloride as catalyst under mild conditions is described. Georg Thieme Verlag Stuttgart.
π-π Stacking versus steric effects in stereoselectivity control: Highly diastereoselective synthesis of syn-1,2-diarpropylamines
Garcia Ruano, Jose L.,Aleman, Jose,Alonso, Ines,Parra, Alejandro,Marcos, Vanesa,Aguirre, Jose
, p. 6179 - 6195 (2008/02/13)
N-Arylarylideneamines react with sulfinylbenzyl carbanions derived from 2-(p-tolylsulfinyl)toluenes (S)-1 and (S)-2, affording epimeric mixtures at C1 of 1,2-diarylethyl- and 1,2-diarylpropylamine derivatives. The sulfinyl group completely controls the configuration at C2 in the reactions of (S)-2. The configuration at Cl depends on the electron density of the ring adjacent to the iminic carbon atom which is modulated by π-π stacking interactions with the ring joined to the carbanionic centre. The stereoselectivity was controlled by modifying the acceptor character of the arylideneamine ring with appropriate substituents, the formation of the highly selective (R) configuration at C1 being made possible by electron-donating groups. N-(2,4,6-Trimethoxyphenyl) arylideneamines have been shown to be suitable starting materials for the preparation of (R)-1,2-diarylethyl- and (1R,2S)-1,2-diarylpropylamines (syn epimers) in a highly stereoselective manner.
