104934-50-1

Basic information

• Product Name: Poly(3-hexylthiophene-2,5-diyl)
• Synonyms: POLY(3-HEXYLTHIOPHENE-2,5-DIYL), REGIOR;POLY(3-HEXYLTHIOPHENE-2,5-DIYL), R;Thiophene Polymer;Poly(3-hexylthienylene) Poly(hexyl-2,5-thiophenediyl) Poly(3-hexylthiophene-2,5-diyl);Poly(3-n-hexylthiophene);Poly(hexylthiophene);Poly(3-hexylthiophene-2,5-diyl) (regioregular electronic grade);Poly(3-hexylthiophene-2,5-diyl), average M.W. 30,000
• CAS NO: 104934-50-1
• Molecular Formula: C10H14R2S
• Molecular Weight: 166.28316
• Product Categories: OTFT/OFET/OPV Materials;OLED;electronic;pharmacetical
• Mol File: 104934-50-1.mol
• Article Data: 0

Chemical Properties

• Melting Point: 238 °C
• Boiling Point: 84 °C, 357 K, 183 °F
• Appearance: red/Powder/Chunks
• Density: 1.051 g/mL, liquid
• Solubility: chloroform, methylene chloride, toluene and THF: soluble
• Sensitive: Light Sensitive
• CAS DataBase Reference: Poly(3-hexylthiophene-2,5-diyl)(CAS DataBase Reference)
• NIST Chemistry Reference: Poly(3-hexylthiophene-2,5-diyl)(104934-50-1)
• EPA Substance Registry System: Poly(3-hexylthiophene-2,5-diyl)(104934-50-1)

Safety Data

• Hazard Codes: Xi
• Statements: 36/37/38
• Safety Statements: 26-36
• WGK Germany: 3
• Hazardous Substances Data: 104934-50-1(Hazardous Substances Data)

Usage

Datasheet

Regioregular poly(3-hexylthiophene-2,5-diyl). Commonly known as P3HT. The highest regioregularity P3HT (M104, RR = 96.3%) produces highly crystalline films and is recommended for OFETs, nanofibril formation and fast drying OPVs at the thin interference peak (90 nm). However, the exceptionally high regioregularity of this P3HT means that gelling and surface roughness can be an issue for slow-drying thick-film OPVs (>200 nm). Lower molecular weight and regioregularity P3HT is recommended for inkjet and other large area or slow drying deposition techniques where gelling/aggregation and surface roughness need to be avoided. A fabrication report with mobility measurements of 0.12 cm2/Vs for M104 can be found below. All the P3HT below is highly soluble (50 mg/ml) in chlorinated solvents such as chloroform, chlorobenzene, dichlorobenzene and trichlorobenzene. The intermediate and lower molecular weight P3HT materials are recommended for use with non-chlorinated solvents such as xylene, toluene and THF due to their increased solubility.

Description

Regioregular poly(3-hexylthiophene-2,5-diyl), commonly known as P3HT, is a popular low band gap polymer donor with applications in organic photovoltaics, polymer solar cells, OLEDs and OFETs. We sell a full range of P3HT with different molecular weights and regioregularities for a variety of research purposes. Produced by Merck KGaA, this high quality P3HT collection allows a wide range of science and engineering to be undertaken.

Chemical Properties

Green to brown to black solid

Uses

Poly(3-hexylthiophene-2,5-diyl) optimized for use in organic photovoltaic's (OPV) research and devices. It is also used in laboratories.